19Q0036_Atch_1_SOW_Range_Cleaning_19Dec18.pdf

509 SFS/CATM 25-METER RANGE CLEANING

STATEMENT OF WORK (FY19)

19 December 2018

DESCRIPTION OF SERVICES:

1. Overview: The contractor shall provide all tools, supplies, equipment, transportation and labor necessary to perform copper and hazardous waste decontamination, clean-up, removal and disposal from the Combat Arms 25-meter firing range, Bldg 1236, Whiteman AFB. Range size:

18-point range, 14,000 square feet, 8’6” ceiling height, 9’ height to baffles, space between bullet trap and concrete wall is 12’.

2. Requirement: The contractor shall clean the 25-meter range in accordance with guidance set forth in OSHA standard 29 CFR Parts 1910 and 1926, 49 CFR 100-199 and 261. In accordance with these guidelines, the contractor should use proper personal protective equipment (PPE), site security, clean up, decontamination procedures, medical monitoring and disposition of waste, hazardous waste spill and decontamination contingency plan and emergency procedures for their workers.

3. Work to be accomplished:

Work to be conducted on a monthly basis:

Removal of copper dust and all hazardous debris from the range floor, firing platform, backstop plates and behind the bullet trap.

Work to be conducted when needed:

The 55 gal “skinny” barrels from the Dust Collection Unit (DCU) and Auger system will be removed, disposed of, and replaced with a new barrel. Contractor shall provide new 55 gal “skinny” barrels as needed. Replace the DCU filters. The DCU filters will be provided by the Government.

4. Specific equipment needed: The use of an explosion proof HEPA filtered vacuum to remove heavy accumulations of lead dust and nitro cellulose. Any other special equipment as may be required to comply with OSHA, EPA and the state of Missouri.

5. Waste Disposal: The contractor shall be responsible for all waste disposal, i.e. barrels, filters, dust, debris, etc. Waste shall be disposed of IAW with EPA and MO DNR requirements.

Any required permits and/or fees are the responsibility of the contractor.

6. Scheduling: The contractor shall accomplish this work between the hours of 0730-1600, Monday- Friday, excluding Federal holidays. The 509th Combat Arms shop will contact the contractor to conduct cleaning.

7. Skinny Barrel Information: Skinny barrel dimensions are 23.5” wide diameter x 33.5” tall.

Previously the barrels were replaced every two months, however, now we have more firing points and frequency may be on a monthly basis.

8. DCU Filter Information (Govt provided): Previously the 12 DCU filters were replaced every six months. Filter part number is P190827-016-436. Dimensions: 254 square foot filter area, outer diameter is 13.84 inches, inner diameter is 9.46 inches, 2 inch pleat height and 26 inches in length. Media type is ultra-web.

End of Statement of Work