Atch 7 - Asbestos Inspection Report Jun19.pdf

June 14, 2019

FE Warren AFB

Building 155

Cheyenne, WY

Dear Customer, On June 13, 2019 ATS performed an asbestos inspection of the above-mentioned project. The purpose of the survey is to identify asbestos containing material (ACM) using nondestructive sampling protocols.

Inspection, sampling and analytical procedures were performed in general accordance with the Environmental Protection

Agency’s (EPA) interpretations, and guidelines of the Asbestos Hazardous Emergency Response Act (AHERA).

Asbestos containing materials as defined by the Occupational Safety and Health Administration (OSHA), the Environmental

Protection Agency and the State of Wyoming are material with asbestos concentration greater than 1% (>1%) by volume.

However, OSHA governs asbestos exposures to employees above the Permissible Exposure Limit regardless of asbestos containing material concentration.

No inspection can eliminate the uncertainty regarding the presence of ACM. ATS’s level of diligence and investigative procedures are intended to reduce, but not eliminate potential uncertainty regarding the presence of ACM. The determinations in this report should not be constructed as a guarantee that all ACM present in the subject property has been included in this report.

The inspection was performed in a manner consistent with the level of care and expertise exercised by members of the asbestos inspection and assessment profession. Those entities and persons involved with the inspection and generation of this report do not imply or guarantee that all potential ACM on or in the building has been identified and sampled.

Historically, asbestos has been added as a component to over 3,000 materials and products produced in the United States.

The inspection was intended to identify those accessible materials that were reasonable suspect and that were most likely to contain asbestos in quantities subject to regulation, based on existing industry and regulatory standards.

If suspect material is discovered during renovation or demolition, work needs to be stopped and suspect material needs to be tested prior to proceeding.

Total samples taken: 20

Asbestos and Technical Services, Inc.

P.O. Box 2574

Cheyenne, WY 82003

307-214-0904 Asbestos Inspection Report

FIELD NOTES AND SAMPLE LOCATIONS

• 20 Samples, 16 Asbestos & 4 Lead o Asbestos Samples o Sample 1 – Window glaze, west wall Location: Shop room o Sample 2 – Window caulking, west wall Location: Exterior west o Sample 3 – Drywall, ceiling Location: Exterior west o Sample 4 – Compound on floor, white Location: Exterior west o Sample 5 – Caulking at bottom of CMUE Location: Exterior west o Sample 6 – CMU surface compound Location: Exterior west o Sample 7 – Drywall Location: Exterior west o Sample 8 – Wall patching, dark grey Location: Exterior west o Sample 9 – Black coating at wall base Location: Exterior west o Sample 10 – Grout, tan for CMU Location: Exterior west o Sample 11 – Pipe sealant on fiberglass wrap Location: Shop room o Sample 12 – CMU surface compound Location: Shop room o Sample 13 – CMU surface compound Location: Exterior east o Sample 14 – CMU surface compound Location: Exterior east o Sample 15 – T-lock, green on roof edge Location: Exterior east o Sample 16 – Drywall Location: Exterior east o Lead Samples o Pos.- Sample L1 – green + tan + grey, N. wall Location: Entry room o Neg.- Sample L2 – green + red + grey, N. wall Location: Shop room o Pos.- Sample L3 – white paint, soffit Location: Exterior east o Neg. - Sample L4 – beige + green, S. wall Location: Entry room

Please feel free to contact me with any questions.

Sincerely, Nate Challenger

Project Manager

Asbestos and Technical Services

307-214-0904