Attachment_2-PWS.pdf

PERFORMANCE WORK STATEMENT

FOR

INFRARED RADIANT HEATERS

MAINTENACE, REPAIR, & INSPECTION

SERVICES

April 2019 Offutt AFB, NE Base Contract

Reviewed:

Quality Assurance Program Coordinator Date

Program Manager/Functional Commander Date

APPROVED:

Contracting Officer Date

Table of Contents

Section Number and Title Page Number

1. DESCRIPTION OF SERIVCES 3

2. MAINTENANCE AND INSPECTION SERVICES 4

3. REPAIR SERVICE CALLS 4

4. GOVERNMENT REIMBURSEMENT FOR PARTS 5

5. ROUTINE SERVICE CALLS 5

6. EMERGENCY SERVICE CALLS 6

7. REPEAT SERVICE CALLS 6

8. SITE SAFETY 6

9. MAINTAIN INFRARED RADIANT HEATER SPARE PARTS 6

10. SERVICE SUMMARY 7

11. QUALITY CONTROL PLAN 7

12. QUALITY ASSURANCE 8

13. PERIODIC SURVEILENCE 8

14. PERIODIC PROGRESS MEETING 8

15. GOVERNMENT FURNISHED PROPERTY AND SERVICES 8

16. GENERAL INFORMATION 9

17. CONTRACTOR/EMPLOYEE BASE PASS AND

IDENTIFICATION AND VEHICLE PASSES 9

18. SECURITY AND EMERGENCY SERVICES 10

19. APPENDIX A 13

1.0 DESCRIPTION OF SERVICES. The Contractor shall provide all supervision, personnel, labor, equipment, tools, parts, and other items to perform annual inspections, maintenance, and services in order to achieve safe, clean, quiet, and efficient infrared radiant heat systems at Offutt AFB, NE. The Contractor shall provide OSHA approved mechanical lifts which may include a 135 foot boom lift, a 32 foot electric scissor lift with soft tires, a 60 foot straight boom lift, and a 40 foot gas all terrain scissor lift. Stationary scaffolding is prohibited. All waste material and trash must be disposed of daily outside the confines of Offutt AFB in a contractor provided area.

All work performed by the Contractor shall be performed in accordance with all applicable laws, regulations, standards, instructions, and commercial practices. The Contractor shall accomplish all cleaning tasks and inspections identified in this Performance Work Statement (PWS) in order to meet the requirements of the contract and the Service Summary (SS).

1.1. This full maintenance contract signifies an infrared radiant heater (IRH) service provider (Contractor) takes total service responsibility for each IRH identified in the contract. The Contractor shall perform annual inspections on IRH systems at Offutt AFB, NE. The inspections shall begin in April and shall be completed within 120 calendar days from initial date of inspection.

Once the annual inspections are complete, the Contractor shall prepare and submit a written report within 10 days of the final inspections. A copy of the manufacturer’s specifications will be provided to the Contacting Officer (CO) or Contracting Officer’s Representative (COR) to ensure compliance. At a minimum, the report shall include:

1. Identification and location

2. Make, model, and serial numbers

3. Maintenance performed

4. Repairs required

5. Date of inspection

6. Inspector’s name

7. Statement of the overall condition of the IRH system

1.2. Work conducted on each IRH shall follow manufacturer’s installation, operation, and service manual and shall also be in accordance with the Infrared Heater Safety Council (IRSC), National Fire Protection Association Standards (NFPA), and current national, state, and local codes for gas, electrical, and venting. All materials gathered and/or developed in the performance of these tasks listed below shall be returned to and become property of the Air Force; and shall not be used and/or distributed by the Contractor without specific written permission from Contracting Officer’s Representative (COR). At a minimum, the cleaning and maintenance of each IRH shall include the following steps:

1. Clean the access panel, control box, emitter tube, and reflector panels.

2. Disconnect the vent stack and remove any foreign material that may have collected on the blower wheel. Verify the blower wheel is clean and operable. Inspect and replace bird screens as needed.

3. Inspect and clean the spark electrode assembly. Remove any foreign objects from electrode tip. Set the spark gap according to the manufacturer specifications.

4. Inspect all infrared heater tubes for holes, cracks, and distortion of tubes. Verify tubes are properly connected in accordance to the manufacturer’s instructions and specifications.

5. Inspect gas connections and verify proper inlet gas pressure. Refer to the manufacture’s installation, operation, and service manual.

6. Clean and inspect burner assembly and orifices.

7. Verify pump and blower inlets and outlets are free of blockage or soot.

8. Ensure combustion chamber and burner observation windows are clean and free of cracks or holes.

9. Inspect the flues leaving the heaters for stability and cleanliness. Check bird screens/caps on intake and exhaust.

2.0 MAINTENANCE AND INSPECTION SERVICES. Performance of work will commence within 30 calendar days upon award of contract. The annual inspections shall begin in the first week of April and shall be completed within 120 calendar days from initial date of inspection.

Once the annual inspections are complete, the Contractor shall prepare and submit a written report within 10 days of the final inspections. At times, the inspections in the aircraft hangars or maintenance facilities may be delayed due to aircraft in the hangars, exercises, or mission operations. The Contractor should continue with inspections in other buildings, such as Building

301. Additional days for inspections will not be awarded unless given written permission from the COR or CO. Parts required in Table 9.1 below must be ordered within 7 calendar days upon award of contract and received by 45 calendar days from date ordered.

2.1. The Contractor shall determine and document the working order and condition of all IRH systems for the number of units listed in Appendix A.

2.2. At the discretion of the CO/COR, the Government will replace missing items and repair all items not in working order, or the CO/COR will direct the Contractor to replace the missing items or accomplish the repair. The Contractor will be reimbursed for required work. The CO/COR will give disposition instructions for items beyond repair. The Contractor and the CO/COR shall jointly certify their agreement as to the working order of the equipment in writing. Damage to the IRH caused by government personnel or equipment by misuse and/or negligence will be estimated separately and repair work will not be accomplished until notified by the CO/COR.

2.3. The Contractor and CO/COR shall review the current inspection, test, and maintenance status of all IRH systems included in the contract. The Contractor shall coordinate with facility managers for each building listed in Appendix A and shall submit a planned work schedule of annual inspections to the CO/COR for approval. The Contractor shall submit a documented report to the CO/COR on all IRH inspection, test, and maintenance work, noting discrepancies, system impairments, estimated repair cost, and recommendations, within 10 calendar days after completion of the annual inspections.

3.0 REPAIR SERVICE CALLS. The Contractor shall provide routine and emergency services calls under the full maintenance service agreement at no additional costs to the Government. The CO/COR shall determine if the service call is a routine call or emergency call. The Contractor shall provide a point of contact 24 hours per day, 7 days a week to receive a routine or emergency service call. All repair work shall be in accordance with normal commercial practices. The CO/COR will notify the Contractor of repairs to be made from inspection reports or service calls.

The Contractor shall report to the work location, survey the repairs, and provide the CO/COR an estimate of time and cost of repairs not covered in the full maintenance service contract.

3.1. The Contractor shall provide the CO/COR a written estimate that must include parts, part numbers, labor, overhead, profit, and other incurred cost broken out individually. The Contractor shall commence repair work 48 hours after the notification from the CO/COR to proceed. Upon completion of any service call, the Contractor shall notify the COR the status of the IRH system.

All repair work shall have a minimum 1 year warranty on parts and labor.

3.2. During services, the Government will occupy the existing facilities. The Contractor shall not restrict nearby pedestrian or vehicles in the facility and shall perform the work so as not to interfere with ongoing operations. The Contractor shall coordinate services with the facility manager to minimize conflicts and to facilitate usage.

4.0 GOVERNMENT REIMBURSEMENT FOR PARTS. Following the inspections and repairs in paragraph 3.1 above, any replacement parts or components, not listed in the required spare parts listed in Table 9.1, having a replacement cost of $50.00 each or greater shall either be Government furnished or Contractor reimbursable, at the option of the Government. Based on market research conducted by the COR, the Government will validate the cost of the replacement part(s) or component(s). Once the retail cost of the replacement part or component has been determined to be at least $50.00, the CO/COR will notify the Contractor as to what option the Government has selected. The Contractor will invoice accordingly. Part(s), component(s), and consumable items costing less than $50.00 each, not listed in the required spare parts listed in Table 9.1, shall be the Contractor’s responsibilities.

5.0 ROUTINE CALLS. A service call will be classified as a routine call when the work or adjustments do not qualify as an emergency call.

5.1. The CO/COR will notify the Contractor of repairs to be made from the inspection report or for a service call. The Contractor shall respond to the IRH and begin work on routine service calls at no additional cost to the Government within 48 hours after receipt of the call.

5.2. The Contractor shall report to the work location, survey the repair, and provide the CO/COR an estimate of time and cost of repairs not covered in the full maintenance service contract, but necessary to bring the IRH back to safe, clean, quiet, and efficient operation. The Contractor shall commence repair work after notification from the CO/COR. The Contractor shall prepare and submit to the COR a written report within two business days after the repair. The report shall include the date of inspection, location of the IRH, statement of repair performed, and name of the technician performing the repairs.

6.0 EMERGENCY CALLS. Emergency calls are defined as calls made for services when an IRH system fails and constitutes danger to personnel and property, or threatens to disrupt activities, operations, training, or the mission.

6.1. The CO/COR will notify the contractor of repairs to be made from the inspection report or for a service call. The Contractor shall respond to the IRH and begin work on emergency service calls at no additional cost to the Government within 4 hours after receipt of the call.

6.2. The Contractor shall report to the work location, survey the repair, and provide the CO/COR an estimate of time and cost of repairs not covered in the full maintenance service contract, but necessary to bring the IRH back to safe, clean, quiet, and efficient operation. The Contractor shall commence repair work after notification from the CO/COR. The Contractor shall prepare and submit to the COR a written report within two business days after the repair. The report shall include the date and time of the service call, the location of the IRH, the repair performed, and the name of the technician performing the repairs.

7.0 REPEAT SERVICE CALLS. In the event there is an intermittent problem or reoccurrence of the same malfunction within 14 calendar days of the original service call, the Government shall not be charged for the subsequent service call(s).

8.0 SITE SAFETY. At any time, the work site shall be subject to safety inspections by the CO, COR, or Offutt AFB Safety Officer to ensure compliance with fire, safety, environmental, and public health regulations and procedures. Discrepancies will be recorded and shall be corrected immediately. Any costs or time delays associated with correcting discrepancies are the sole responsibility of the Contractor.

8.1. The Contractor shall assume full responsibility and liability for compliance with the applicable regulations pertaining to the health and safety of personnel during the execution of work. The Contractor shall indemnify and hold the Government harmless for any action on his part or that of his employees or subcontractors which results in illness, injury, or death.

9.0 MAINTAIN INFRARED RADIANT HEATER SPARE PARTS. The Contractor shall maintain all parts listed in Table 9.1 below.

9.1.

Mfr. Model Emitter Tube Part #

Igniter Part #

Inducer Motor Part #

Gas Valve Part #

Lamps Part #s

Space-ray LTU.S225NG 44028040 10 Each

30331040 10 Each

42928010 1 Each

30475050 1 Each

30220020 Red 30220030 Amber

5 Each Color

10.0 SERVICE SUMMARY (SS). The contract service requirements are summarized in performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimally acceptable levels of service required for each requirement. The SS and the Contractor’s Quality Control Plan provide information on contract requirements, the expected level of contractor performance and the expected method of government surveillance and confirmation of services provided. These thresholds are critical to mission success. Procedures as set forth in the FAR 52.212-4 (a), Contract Terms and Conditions - Commercial Items, Inspection/Acceptance, will be used to remedy all deficiencies. During the first initial 30 days of the contract, two additional errors on each task shall be allowed in an effort to identify normal phase-in problems.

Performance Objective PWS Para Performance Threshold Perform Inspections.

Inspections performed and an accurate report is delivered within 10 days of inspections.

2.1 100% of IRH systems are inspected and accurate reports are turned into the CO/COR within time specified.

Perform Preventive Maintenance and Service Call Repairs on IRH systems.

IRHs are in good working order.

Systems are repaired within the time specified and in a timely manner.

3.0, 5.1, 5.2, 6.1, & 6.2 100% of IRH systems are safe, clean, quiet, and efficient at all times and shall be repaired within time specified.

Maintain Infrared Heaters Spare Parts.

9.0 & 9.1 95% of spare parts are readily available.

Follow manufacturer’s installation, operation, and service manual

1.2 100% of IRH systems are maintained in accordance with manufacturer’s manual and commercial practices.

11.0 QUALITY CONTROL PLAN (QCP). The Contractor shall develop and maintain a QCP to ensure maintenance and repairs are performed in accordance with commonly accepted commercial practices and services identified in this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-performance and continual repeat of defective service does not occur. A written QCP shall be submitted to the CO/COR for review, feedback, and approval. The plan shall be submitted no later than the pre-performance conference.

The QCP shall specifically address the Contractor’s strategy to provide quality workmanship, continual process improvement, and for correcting deficiencies as required.

12.0 QUALITY ASSURANCE. The COR shall inspect and evaluate the Contractor’s performance to ensure services are received in accordance with requirements set forth in the contract. The COR shall inspect by watching actual task performance, physically checking an attribute of the completed task, checking a management information report, investigating customer complaints, conferring with facility managers, or otherwise inspecting the task or its results to determine whether or not performance meets the standards contained in this Performance Work Statement. The COR will use the Contractor’s work schedule or modified version thereof, to record surveillance results. Results of the surveillance then becomes the official Air Force record of the Contractor’s performance. When a performance threshold has not been met or contractor performance has not been accomplished, the COR will initiate and provide the CO a Corrective Action Report (CAR) or Customer Complaint Form (CCF) for issuance to the Contractor. The Contractor shall respond to the CAR or CCF IAW instructions provided and return it to the CO within 10 calendar days of receipt.

13.0 PERIODIC SURVEILLANCE. This method requires the COR to employ a “spot check” style of evaluation based on the Contractor’s schedule. Periodic surveillances will be conducted on a scheduled basis (monthly or annually) and may be adjusted, based on quality trends. Any unsatisfactory inspection (defect) result shall be recorded, and the Contractor shall reperform the service after notification by the COR. Failing to meet the performance threshold as outlined in the Service Summary for any of these performance objectives in any one month period shall result in a warning or letter of concern from the CO. Failing to meet the performance threshold as outlined in the Service Summary of these performance objectives in any combination for any two, or more consecutive or non-consecutive months during a contract period shall constitute an immediate progress meeting with Government Representatives. All remedies shall be in accordance with the FAR 52.212-4 (a), Contract Terms and Conditions - Commercial Items, Inspection/Acceptance.

14.0 PERIODIC PROGRESS MEETING. The CO, COR, other government personnel as appropriate, and the Contractor may periodically meet to discuss the Contractor’s performance.

The following topics may be discussed: opportunities to improve the contract, any modifications required of the contract, unsatisfactory inspections and trends against each performance objective, observed positive performance, and steps taken by the Contractor to prevent unsatisfactory occurrences in the future. The Contractor shall provide a summary of unsatisfactory inspections and customer complaints and provide insight into any identified trends. The minutes of these meetings will be reduced to writing, signed by the CO and any other signatures as deemed appropriate, distributed to the functional area and the Contractor. Should the Contractor not concur with the minutes, the Contractor will provide a written notification to the CO identifying areas of non-concurrence for resolution.

15.0 GOVERNMENT FURNISHED PROPERTY AND SERVICES. Government Facilities or Equipment will not be provided.

16.0 GENERAL INFORMATION

16.1. HOURS OF OPERATION. The Contractor shall perform the services required under the contract during normal base hours in paragraph 16.2. below. The Contractor is not required, and in most cases, will not be able to perform services on Federal Holidays.

16.2. NORMAL BASE HOURS. Base hours of operation are 0700 hours until 1700 hours, Monday-Friday, excluding holidays. The Contractor may find it necessary to deviate from the normal base hours of operation to ensure timely completion of work under this Performance Work Statement at no additional cost to the Government. A Contractor Representative shall be available to answer questions until 1615 hours on normal duty days.

16.3. FEDERAL HOLIDAYS.

New Year’s Day - 1 January Martin Luther King Day - 3rd Monday in January Washington’s Birthday - 3rd Monday in February Memorial Day - last Monday in May Independence Day - 4 July Labor Day - 1st Monday in September Columbus Day - 2nd Monday in October Veteran’s Day - Monday of the week of November 11th Thanksgiving Day - 4th Thursday in November Christmas Day - 25 December

If these holidays fall on Saturday, the preceding Friday will be observed. If these holidays fall on Sunday, the following Monday will be observed. If a holiday falls on a scheduled service day, the Contractor will be responsible for rescheduling services before or after the holiday or day observed.

16.4. BASE CLOSURES. Work scheduled but not accomplished because of base closure due to weather, down days, exercises, or actual alert, will be accomplished as soon as possible after reopening the base.

16.5. POINTS OF CONTACT. Personnel from the 55th Civil Engineering Squadron - Service Contracts will monitor the contract. Service Contracts shall be contacted at 402-232-7223 at least 10 days prior to start of work to schedule this work.

17.0 CONTRACTOR/EMPLOYEE BASE PASS AND IDENTIFICATION AND VEHICLE

PASSES. The Contractor shall comply with all requirements and procedures IAW FAR 5353.242- 9000, Contractor Access to Air Force Installations. All documentation shall be submitted at the pre-performance conference.

17.1. PERSONAL SECURITY REQUIREMENTS. Contractor personnel shall obtain and possess at all times while on Offutt AFB, an authorized identification badge. Each contractor employee will be required to fill out a DD Form 1172, Application for Uniformed Services Identification Card, prior to issuance of an ID badge. This form will be available from the Quality Assurance Evaluators Office or the Contracting Office. The Contractor is responsible for controlling and accounting for all identification badges and restricted area badges. When employee(s) leave the employment of the Contractor, the Contractor is responsible for recovering the ID badges and all other entry/security documents from the terminated employee and immediately (within one duty day) deliver these items to the Contracting Officer. It is the responsibility of the individual contractor employee to immediately notify local installation authorities (Security Forces) of a lost or stolen ID badge.

17.2. DISPLAY OF CREDENTIALS. Contractor personnel shall be required to wear and display their issued identification badge on the outside of their clothing to appropriately identify them while performing contract services on Offutt AFB.

17.3. CONTRACTOR VEHICLES. The Contractor shall provide and maintain vehicles for transportation to meet the requirements of the contract. All vehicles used in the performance of the contract shall have the company name prominently displayed on the vehicle and be maintained to present a clean, neat, and professional appearance at all times. All contractor employees operating a vehicle on Offutt AFB must have a valid driver’s license, valid registration, and proof of insurance.

18.0 SECURITY AND EMERGENCY SERVICES. The Contractor shall comply with all applicable federal, state, and local laws, regulations, ordinances and standards related to safety and security matters at Offutt AFB. The Contractor shall further comply with security regulations imposed by the Installation Commander and the agency occupying the space where work is to be performed, including any necessary security clearances.

18.1. CELL PHONE USAGE. Talking on a cell phone while driving is strictly prohibited on Offutt AFB unless it is from a hands-free device. Cell phones that have the capability to take pictures or record sounds are not authorized in controlled or restricted areas. Taking pictures on Offutt AFB is prohibited unless special permission has been granted.

18.2. WEAPONS, FIREARMS, AND AMMUNITION. Contractor employees are prohibited from possessing weapons, firearms, or ammunition on themselves or within their Contractor-owned or privately owned vehicles while on Offutt AFB.

18.3. REPORTING REQUIREMENTS. Contractor personnel shall report to an appropriate authority any information or circumstances of which they are aware that may pose a threat to the security of DoD personnel, contractor personnel, resources, and classified or unclassified defense information.

18.4. PERSONNEL. Contractor personnel shall present a neat appearance and shall be easily recognizable while on the installation in conjunction with the contract. This shall be accomplished through the wear of distinctive clothing, overcoats, or hats, bearing the company name or logo.

The coloring or design of the items selected should be such that identifies personnel easily and quickly for reasons of safety and personal protection. A contractor employee may be asked to provide proof of a government-issued badge at any time; the employee must comply with such request. The Government is authorized to restrict the employment under the contract of any contractor employee or prospective contractor employee, who is identified as a potential threat to the health, safety, security, general well-being, or operational mission of the installation and its population.

18.5. CONTROLLED AREA ACCESS. Access to all controlled areas is strictly permissive and subject to direction of the CO or the authorized representative. When required and upon award of the specific contract, contract modification, or delivery order, the Contractor shall be provided a specific named government POC who shall provide specific instructions for accessing the controlled work areas. The assigned government POC will also coordinate all required escorts to project sites that are located within controlled areas.

18.6. SECURITY TRAINING. The sponsoring agency’s Security Manager will conduct all required training. Contractor personnel who work in Air Force controlled/restricted areas must be trained IAW AFI 31- 101, The Air Force Installation Security Program.

18.7. FOR OFFICIAL USE ONLY (FOUO). The Contractor shall comply with DoD 5400.7-R, Chapter 4, DoD Freedom of Information Act (FOIA) Program requirements. This regulation sets policy and procedures for the disclosure of records to the public and for marking, handling, transmitting and safeguarding FOUO material.

18.8. AIRFIELD DRIVING. The Contractor shall coordinate through the government authorized representative or COR for restrictions involving access to the flight line, taxiway, and runway areas.

Any person operating a motor vehicle inside the airfield fence on Offutt AFB must have in their possession a current AF IMT 483 Certificate of Competency for airfield driving. Training for obtaining AF IMT 483 is approximately 3 hours per individual and will be conducted by the CE airfield driving program manager. Only individuals with a valid Certificate of Competency are authorized to have the gate code(s) to access the flight-line. Offering or providing airfield gate codes to unauthorized individuals or not following procedures outlined in the training, including FOD checks when entering the flight-line, will result in immediate revocation of the individual’s Certificate of Competency. Project delays or costs associated driving revocations shall be at the Contractor’s expense and no additional cost to the Government. The Contractor shall comply with AFTCI 13-213 – Airfield Driving and the instruction of the Airfield Manager at all times.

18.9. PHYSICAL SECURITY. The Contractor shall be responsible for safeguarding all government property and controlled forms provided for contractor use. At the end of each work period, all government facilities, equipment and materials shall be secured as required by sponsoring unit directives.

18.10. KEY CONTROL. The Contractor shall establish and implement methods to ensure all keys issued to the Contractor by the Government are not lost or misplaced and are not used by unauthorized persons. The Contractor shall not duplicate any keys issued by the Government. (1) The Contractor shall immediately report to the sponsoring agency any occurrences of lost or duplicated keys. (2) In the event that keys, other than master keys, are lost or duplicated, the Contractor may be required, upon written direction of the CO, to re-key or replace the affected lock or locks without cost to the Government. The Government may, however, at its option, replace the affected lock or locks or perform re-keying and deduct the cost of such from the monthly payment due to the Contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost shall be deducted from the monthly payment due to the Contractor. (3) The Contractor shall prohibit the use of keys, issued by the Government, by any persons other than the Contractor’s employees and the opening of locked areas by contractor employees to permit entrance of persons other than contractor employees engaged in performance of contract work requirements in those areas.

18.11. FIRE AND EMERGENCY SERVICES. The Government will provide general on-base emergency services. The telephone number is 911. The Contractor shall comply with fire prevention rules and regulations enforced by the Offutt AFB Fire Prevention Branch. For routine fire prevention matters call 294-3778.

18.12. 911 EMERGENCY SERVICES. A 911 call from a cell phone will be received by off-base emergency 911 systems. This will cause a delay in emergency response times. Whenever feasible, Contractors should use base telephones to request 911 emergency services.

18.13. EMERGENCY PROCEDURES. Contractor employees shall follow the direction of government employees in regards to emergency procedures. Examples include fire, tornado, active shooter, bomb threats, etc. It is the responsibility of the Contractor to provide clear guidance and establish procedures for responding to emergency of their employees and account for their respective employees following an emergency evacuation. Contractor personnel shall participate with government personnel in all emergency services practice drills (e.g. fire, tornado, active shooter drills, etc.) and at no additional cost to the Government.

18.14. In the event of a fire emergency, the Contractor is authorized to use any available Class A, B, or C fire extinguishers at any work site.

18.15. EMERGENCY MEDICAL SERVICES. In the event of a medical emergency on Offutt AFB, the Government provides twenty-four (24) hour on-base, state certified paramedic-level emergency response and patient transport services for contractor personnel. The telephone number is 911 for emergencies. The Contractor shall reimburse the Government for emergency medical services rendered.

18.16. SECURITY POLICE SERVICES. The Government provides general on-base security forces' service. Security Forces' telephone numbers are 911 for emergencies; 294-5677 for crime in progress; and 294-4302 for non-emergency calls.

APPENDIX A

Building Number

Building Name Number of Units

301 Martin Bomber Building 123 306 Aircraft Hangar 50 307 Aircraft Hangar 44 321 Offutt Field House 61 327 Hazardous Storage Facility 6 362 Automotive/Outdoor Recreation – Equipment Rental 12 374 POV Car Wash 3 456 Communication Facility 1 457 Bennie Davis Aircraft Maintenance Facility 118 491 Aircraft Hangar 32 492 Aircraft Hangar 25 493 Aircraft Hangar 15 517 Aircraft Support Equipment Storage 10 565 E-4 Maintenance Hangar 20 586 Warehouse & Equipment/DRMO 4