Washer and Dryers QA.docx
DOCX document 17 KB Posted
- Attached to
- Dorm Washer and Dryers FY25 Federal contract opportunity
- Solicitation number
- FA4528-25-Q-SE07
About this file
This file contains a Questions and Answers (Q&A) document for a Department of the Air Force Global Strike Command solicitation (FA4528-25-Q-SE07) for dorm washer and dryer replacements. The Q&A provides critical installation and equipment specifications, including electrical requirements (4-prong 220v outlets), venting details (semi-rigid/flex duct), and unit size constraints (4.5-7.5 cubic feet). Key logistical details reveal that equipment must be hand-carried up stairs in buildings 276, 216, and 218, with no elevator access, and installation requires complete removal and disposal of existing units.
The solicitation covers the procurement and installation of 45 commercial-grade washers and 45 dryers across five dormitory buildings (122/123/130, 210, and 211), totaling 45 units. Specific building allocations include 24 units for buildings 122/123/130, 10 units for building 210, and 11 units for building 211. The contract is characterized as a one-time commodity purchase, not a multi-year contract, with specific requirements for single units that match existing electrical configurations and have appropriate capacity ranges.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Dorm Washers and Dryers Fy25 - Combo -SAM.pdf | ||
| Dorm Washers and Dryers FY25 QnA.docx | DOCX document | |
| Attachment 2 - PWS (Updated).docx | DOCX document | |
| Dorm Washers and Dryers Fy25 - Combo -SAM.pdf | ||
| Attachment 3 - Quote Sheet.xlsx | XLSX spreadsheet | |
| Dorm Washers and Dryers Fy25 - Combo -SAM.pdf | ||
| Attachment 2 - PWS.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Washer and Dryers Q&A
· Does the washer need to be 240 Volt?
· There is only one plug for the unit, and it is a 4 prong 220v.
· On the electrical connections for the dryers, is the wall outlet a 3 prong or 4 prong or are the units that are there now are hard wired in?
· There is only one plug for the unit, and it is a 4 prong 220v none should be hard wired in.
· Are venting on the old units’ flex or hard vented?
· They are semi rigid duct/ flex duct.
· For the washer/dryers, is there an elevator for Bldgs 276, 216 and 218 available for use or will this require stair carry?
· There are no elevators the units will require being hand carried.
· For the double stack washer and dryer, is this a 2-piece stacked option or a single unit?
· These are a single unit, there is only one 4 pin connection in 216 and 218. 276 has both plugs, a 120v and a 4 prong 220v.
· Wanted to verify if we can place a construction dumpster on site? We realize we would be responsible for paying for it and having it dumped periodically.
· If they are dumping it and hauling it in, we don’t mind
· Is there adequate space to use a boom truck on each side of the building taking the washers and dryers up to each level?
· No, none of the windows open enough so they will need to be hand carried.
· Also on the dorm washers and dryers it gives a maximum size listed, but is there a minimum size? Or do you know the size that is currently in there, just so that the plumbing aligns up accordingly?
· There is some space in the laundry room to move stuff around, out minimum would be based on capacity. We would not like anything less than 4.5 cubic feet no larger than 7.5.
· Are there any other specifications needed on the washers and dryers other than what’s listed? They need to be single units and not a stackable washer and dryer since 216 and 218 only have one outlet and its 220v.
· Is this a base year plus 4 option years?
· No, this is a one time, commodity buy.
File details come from the government source that posted it. Updated .