4-3 ATCH 9 Government Furnished Property Info 10-R-0102 SABER.pdf

FA4427 -1O-R-O102

GOVERNMENT FURNISHED EQUIPMENT AND MATERIALS

NAME: ANNUNCIATOR PANEL

PART NUMBER: LCD-80

DESCRIPTION: An 80-character, backlit LCD display annunciator ..

MODEL NUMBER: LCD-80

QUANTITY: lEACH

ADDITIONAL INFORMATION: LCD-80 Catalog Sheet Page 1 thru 4

The above government furnished property is provided for installation in the seed project and contractor is responsible for including in their seed project proposal all costs related to installation and transportation to the job site.

The property has been certified to be available for contractor use upon award of the project with a minimum of ten (l0) day notification to the Contracting Officer.

Attachment #9 24 MAR 2009

I n

LCD-SO

Liquid Crystal Display n dn-3198:a

~NOTIFIER@

by Honeywell

, Annunciator Control Systems

General The LCD-80 is an 80-character, ..backlit LCD display annunciator for the NOTIFIER NFS-640, NFS-3030 (ACS mode only), NFS2- 640, NFS2-3030, NFS-320 fire alarm control panels, or the NCAlNCA-2 network control annunciator. Up to 32. LCD"80s may be connected onto the two-wire EIA-485 port. The LCD-80 has two basic modes of operation, "Terminal" and "ACS" mode.

NOTE: The LCD-80 can also be used with Legacy panels.

Please refer to the LCD-80 manual for more information.

Common Features

• Listed to UL Standard 864, Ninth Edition

• 80-character backlit Liquid Crystal Display (20 characters x 4 lines).

• Control switches for System Acknowledge, Signal Silence and System Reset.

• Time and date display field.

• Enable Key switch and phone jack options.

• Can be remotely located up to 6,000 ft. (1828.8 m) from the. LCD-80 with ABF-1 B control panel.

• Local piezo sounder with alarm/trouble resound.

• Flush/surface/panel mount option. Terminal Mode

ACS Mode When operated in "ACS" mode, the LCD-80 provides vectored annunciation capability. Individual devices/zones can be installer-defined to only display at specific locations EXAMPLE: A maintenance office receives only non-alarm point activations. These inputs could be sump pump on, high water, backup AHU on, low temperature in freezer, etc.

• Alarm/trouble count.

• Custom "normal" message.

• European option: first alarm/last alarm/alarm count.

• Field-programmable messages from CRT or PC-compatible computer (PK-LCD-80 Programming Kit required).

• EIA-485 interface: up to 32 per system.

• Printer output port: EIA-232, compatible with PRN Series printers.

• Field-programmable messages in nonvolatile memory in two options: 128 points, 40 character labels; or 256 points, 20 character labels.

• Internal nonvolatile clock for time and date in ACS mode.

NOTE: The NFS-3030 operates with the LCD-80 in ACS mode only.

In "Terminal" mode, the LCD-80 mimics the NFS-640, NCAI NCA-2, NFS2-640, NFS2-3030, NFS-320, NCH and NCH-2 displays. Up to 32 LCD-80s can annunciate and provide remote reset, acknowledge, and silence of the control panel from remote locations.

• Displays device type identifiers.

• Device and zone custom alpha labels.

• Time/date and Device address.

• May operate in addition to CRT.

• No programming necessary. LCD-80 displays time, date, and custom messages received from the panel or network annun-ciator

• The NFS-3030 does NOT use LCD-80 in terminal mode.

• NFS2-3030 and NCA-2 firmware version 14.0 and higher supports LCD-80 in terminal mode.

• LCD-80 is 8.25" (20.96 em) high, 4.375" (11.11 em) wide, and 1.75" (4.45 em) deep.

• Up to LCD-80s may be used on one EIA-485 circuit.

NOTE: Must have sufficient regulated 24 volt power. Certain NOTIFIER systems may have limits to the amount of LCD-80s with ACKISTEp' Signal Silence, and Reset switches.

• LCD-80 mounts with any CHS-4 chassis slot.

Up to 32 LCD-80s may be used in a continuous 4-wire loop (verify sufficient 24 VDC available).

• Each may have ACK/STEP, SIGNAL SILENCE, and SYS- TEM RESET switches.

• Displays all analog, addressable points.

• No programming required for LCD-80s.

dn-3198:a • 03/24/09 - Page 1 of 4

The LCD-SOin ACS Mode

6,000 ft. (1828.8 m) maximum total wire length

EIA-485 EIA-485

(2 wires) (2 wires)

24 VDC 24 VDC

(2 wires) (2 wires) c:=J c:=J

DO DO DO

DO DO DO

TO DO TO DO TO DO

PRN PRN PRN

PRINTER PRINTER PRINTER

NFS-320, NFS2-640, NFS-640, NFS2-3030, NFS-3030, NCA or NCA-2 connecting to LCD.80

The LCD-SOin Terminal Mode

6,000 ft. (1828.8 m) maximum wire length Terminal Mode between each

EIA-485

(2 wires)

Terminal Mode EIA-485 return (2 wires).EIA-232 Printer POrl

PRN Printer

24 VDC

(2 wires)

DO

DO

DO

DO

DO

DO

DO

DO

DO

NFS-320, NFS2-640, NFS-640, NFS2-3030, NFS-3030, NCA or NCA-2 connecting to LCD-80 c:J

The ABF-1B Backbox The ABF-1 DB is a semi-flush-mount backbox for the NOTIFIER ADT-LCD,80 Series Annunciator. The ABF-1 DB mounts one ADT-LCD-80. It includes an attractive smoked-glass door with NOTIFIER keylock.

Dimensions, BOX only: 9.938" (25.24 cm) high, 4.625" (11.75

cm) wide, 2.5" (6.35 cm) deep.

Dimensions, DOOR only: 10.713" (27.21 cm) high, 6.0" (15.24 cm) wide, 0.75" (1.9 cm) deep.

Page 2 of 4 - dn-31 gS:a • 03/24/09

Related Options PK-LCD80 (available for download): Off-Line Programming Kit for LCD-80. Allows PC programming messages when LCD- 80 is used in the ACS mode.

ABF-1 DB: Semi-flush box with alternative smoked-glass door, any keylock.

ADP-4B: Annunciator Dress Plate, black. Allows panel mount-ing of up to four LCD-80 modules in a CAB-4 Series cabinet.

ABF-1 B: Annunciator Flush Box, 9.938" (25.24 cm) high, 4.625" (11.75 cm) wide, and 2.5" (6.35 cm) deep. Order AKS-1 B key switch and APJ-1 B phone jack if desired. Can also be mounted in ABF-2B or ABF-4B annunciator backboxes.

ABS.1TB: Deep Surface Backbox (mounts one LCD-80).

AKS-1 B: Key Switch (black) to enable/disable controls when mounted in ABF or ABS-HB.

APJ-1 B: Annunciator Phone Jack, black. Mounts to ABF flush box or ABS-1 TB.

PRN-6: 80-Column Serial Printer (see PRN data sheet).

Agency Listings and Approvals These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.

• UL Listed: S635

• ULC Listed: CS100

• MEA: 290-91-E; 289-91-E; 345-02-E: 317-01-E (NFS-640)

• CSFM: 7120-0028:156

• FM Approved dn-3198:a. 03/24/09 - Page 3 of 4

ISO 9001

'94;'.'jl#l-1 IIlGINEmlNC Il MANUfACTURING QUAlITY SYSTEMS

Page 4 of 4 - dn-3198:a • 03/24/09

@2009 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited.

This document is not intended to be used for installation purposes.

We try to keep our product information up-to-date and accurate.

We cannot cover ail specific applications or anticipate ail requirements.

Ail specifications are subject to change without notice.

Made in the U.S. A.

For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.

www.notifier.com http://www.notifier.com