1-7 ATCH 1 SPECS 01045 10-R-0102 SABER.pdf

TRAVIS AFB - SABER

SECTION 01045

CUTTING AND PATCHING

1. GENERAL

1.1. Requirements Included.

1.1.1. Requirements and limitations for cutting and patching of Work.

1.2. Related Requirements.

1.2.1. Section 01010 - Summary of Work.

1.2.2. SectiOIi0 to31 - Interfacing of New and Existing Work.

Contract FA4427-to-R-OI02

1.3. Description: Execute cutting, fitting, and patching, including excavation and fill, to complete work, and to:

1.3.1. Fit the several parts together, to integrate with other work.

1.3.2. Uncover existing work to install new work.

1.3.3. Remove and replace defective and nonconforming work.

1.3.4. Remove samples of existing work for testing.

1.3.5. Provide openings in nonstructural elements for penetrations of mechanical and electrical work.

1.4. Submittals

1.4.1. Submit written request in advance of cutting or alteration which affects:

1.4.1.1.

1.4.1.2.

1.4.1.3.

1.4.1.4.

1.4.1.5.

Structural integrity of any element of project.

Integrity of weather-exposed or moisture-resistant element.

Efficiency, maintenance, or safety of any operational element.

Visual qualities of sight-exposed elements.

Work of Government or separate contractor.

TRAVIS AFB _SABER e

1.4.2 Include in request:

1.4.2.1. Identification of project.

1.4.2.2. Location and description of affected work.

1.4.2.3. Necessity for cutting or alteration.

t,ntract FA4427-1O-R-0102

1.4.2.4. Description of proposed work, and products to be used.

1.4.2.5. Alternatives to cutting and patching.

1.4.2.6. Effect on work ofGovemment or separate contractor.

1.4.2.7. Date and time work will be executed.

2. PRODUCTS

2.1 Materials.

2.1.1 Same material as original installation.

2.1.2. For any change in materials, submit request for substitution in accordance with Section 01300.

3. EXECUTION.

3.1 Inspection.

3.1.1. Inspect existing conditions, including elements subject to damage or movement during cutting and patching.

3.1.2. After uncovering, inspect conditions affecting performance of work.

3.1.3. Beginning of cutting or patching means acceptance of existing conditions.

3.2 Preparation.

3.2.1. Provide supports to assure structural integrity of surroundings. Also provide devices and methods to protect other portions of project from damage.

3.2.2. Provide protection from elements for areas which may be exposed by work; maintain excavations free of water.

TRAVIS AFB - SABER

3.3 Performance.

Contract FA4427-10-R-0102

3.3.1. Execute work by methods to avoid damage to other work, and which will provide proper surfaces to receive patching and finishing.

3.3.2. Restore damages with new products in accordance with contract requirements.

3.3.3. Refinish surfaces to match adjacent finishes. For continuous surfaces, refinish to nearest intersections for an assembly, refinish entire unit.

3.3.4. Ensure compatibility to base design.