1. Statement of Work Ammended.pdf
PDF 252 KB Posted
- Attached to
- Sign Replacement
- Solicitation number
- FA441824Q0066
About this file
This document is a Statement of Work (SOW) for the procurement and installation of new directional signage at the Naval Nuclear Power Training Command (NNPTC) Building 2400 Rickover Center in Goose Creek, South Carolina.
The SOW outlines the requirements for 701 new signs, including 109 wall-mounted room signs, 345 wall-mounted room signs, 162 wall-mounted overhead signs, 58 wall-mounted directional signs, 38 zone number signs, 18 stairwell identification signs, and 9 stairwell exit level signs. The signs must meet specific salient characteristics, including Sherwin-Williams Needle Point Navy color, white raised text with braille, and proper mounting heights. The contractor is responsible for removing the existing signs, repairing and painting the wall surfaces, and installing the new signage. Work must be performed during regular business hours and the contractor must adhere to site security requirements. The Requirement Owner maintains final discretion over sign placement and orientation.
This SOW is related to a federal contract opportunity, Solicitation Number FA441824Q0066, issued by the Department of the Air Force Air Mobility Command, for the replacement of over 700 indoor building signs at the NNPTC facility.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Site Visit Questions and Answers.pdf | ||
| FA441824Q0066.pdf | ||
| 3. Salient Characteristics Extension.xlsx | XLSX spreadsheet | |
| 2. Salient Characteristics.pdf | ||
| 4. RFQ Pricing Sheet.pdf | ||
| 6. Provisions and Clauses.pdf | ||
| 1. Statement of Work.pdf | ||
| 5. Chapter 4 UFC.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
NNPTC Building 2400 Rickover Building Signs
GENERAL INFORMATION:
1. SCOPE: The current building directional signs need replacement. This Statement of Work (SoW) outlines the requirements for the procurement and installation of new directional signage.
a. Labeling Specifications and instructions for signs will be attached Salient Characteristics
b. All signs and work accomplished will be Chapter 4 Unified Facilities Criteria (UFC) complaint
(Attachment 4)
c. All signs will have Sherwin-Williams Needle Point Navy Color (SW 0032) 1/8” Thick raised tactile text/pictogram
d. All signs will have White raised text with braille below or to the side
e. All signs will have Grade 2 Braille on one side color-white background
f. Refer to the Salient Characteristics Extension for labeling and sign placement instructions
(Attachment 3).
g. All Wall-Mounted Signs (excluding the overhead signs) will be installed and leveled (Top of Sign) at 60 Inches vertically from the floor.
2. LOCATION: All work is to be performed at the Naval Nuclear Power Training Command (NNPTC), Building 2400 Rickover Center, Joint Base Charleston Naval Weapons Station, Goose Creek, SC.
DESCRIPTION OF WORK:
1. The contractor shall remove the existing signs and dispose of them. The contractor shall limit damage to the wall surface.
2. The contractor shall point, patch, prepare, and paint, all damaged drywall where the extant signs were removed. All repairs performed on the walls will be uniform in appearance. The paint used will be Sherwin-Williams SW0032.
3. The contractor shall provide and install the following signs:
109 Each: 9”X6” Wall Mounted Room Signs:
a. Figure 1 in attached Salient Characteristics
345 Each: 8”X6” Wall Mounted Room Signs:
a. Figure 1 in attached Salient Characteristics
b. The mother's room is referenced in Figure 1 of the characteristics.
162 Each: 6”X15”X1/8” Wall Mounted Overhead Signs:
a. Mounted parallel and +/- 5” horizontally leveled with door frame
b. Mounted with lag screws if stud is available.
c. Mounted with toggle bolts if no stud is available.
d. Figure 2 in attached Salient Characteristics
58 Each: 24”X20” Wall Mounted Directional Signs:
a. Built Rail/Slat System for inserts
b. Figure 3 in attached Salient Characteristics
38 Each: 3” x 3” Zone Number:
a. Mounted 60 Inches vertically from floor to bottom of sign.
b. Figure 4 in attached Salient Characteristics
18 Each: 1’-7 ½” x 1’-2” Stairwell Identification Signs:
a. Figure 4 in attached Salient Characteristics
9 Each: 1’-1” x 9” Stairwell Exit Level Signs:
a. Figure 4 in attached Salient Characteristics
GENERAL SITE REQUIREMENTS:
1. The Requirement Owner will maintain the right to final discretion of every sign’s placement and orientation to ensure uniformity and aesthetics.
2. The project site will be occupied by building personnel during the course of performance of the requirement. Caution must be taken to ensure all safety work practices are adhered to while work is performed.
3. All work will be performed between the hours of 7:30 AM - 4:30 PM, Monday-Friday, excluding
Federal Holidays.
4. Caution must be taken in all work areas of the facility to avoid physical or cosmetic damage to existing government property. Any damage to government property that resulting from the contractor’s actions during installation shall be repaired to the cost of the contractor.
5. The location of performance for this requirement has controlled access requirements. The contractor shall ensure all representatives of their company that perform this requirement meet the security requirements IAW with Clause 5352.242-9000 - Contractor Access to Air Force Installations.
| GENERAL INFORMATION: |
| DESCRIPTION OF WORK: |
| 109 Each: 9”X6” Wall Mounted Room Signs: |
| 345 Each: 8”X6” Wall Mounted Room Signs: |
| 162 Each: 6”X15”X1/8” Wall Mounted Overhead Signs: |
| 58 Each: 24”X20” Wall Mounted Directional Signs: |
| 38 Each: 3” x 3” Zone Number: |
| 18 Each: 1’-7 ½” x 1’-2” Stairwell Identification Signs: |
| 9 Each: 1’-1” x 9” Stairwell Exit Level Signs: |
GENERAL SITE REQUIREMENTS:
File details come from the government source that posted it. Updated .