E_-_Facility_Inventory_-_RP_&_Non-RP.xlsx

Sheet1

Lighting consists of a combination of T8 linear fluorescent fixtures and compact flourescent lights (CFLs). Interior lighting is controlled manually by wall switches, with the exception of some private offices on the second floor which have occupancy sensors. Exterior lighting is composed of high-intensity discharge (HID) wallpacks, which are controlled by photocells.

- Domestic hot water is provided by a central electric tank-type water heater.

- The entire building is air conditioned and heated. The building is condidioned by a series of air handling units (AHUs) with zone-level fan-powered variable air volume terminal boxes with electric reheat. Cooling water supplied by air cooled chillers located on the northwest exterior of the building. Air handlers utilize DDC controls and VAVs have pneumatic controls.

2626 Security Entry Access Point (SAEP) 2018 Yes 10187 The SAEP (Building 2626) is located on the central axis of the parking lot and opens onto a campus type quad between Building 2314 and Building 2701. There is a sidewalk network established between all the training buildings, X-Ray South and X-Ray north, and the SAEP for the ease of pedestrian flow for students and training staff. This sidewalk network also serves as emergency vehicle access within the complex and around the buildings.

-The exterior walls are cast-in-place architectural finished concrete with a horizontal ribbed form liner and form ties that form a pattern on the elevation. Walls are designed to meet blast resistant criteria.

-The building exterior does not have any windows, interior borrowed light windows are 1/4-inch wire glass in hollow metal frames, where located in 1-hour fire walls and 1/4-inch tempered glass in hollow metal frames at nonrated walls.

-Exterior doors are heavy duty steel construction designed to meet the blast resistant criteria.

-Roofing System: Two ply granular surface modified bitumen roof system over a ½-inch glass mat gypsum cover board and five inches of polyisocyanurate insulation.

2701 Training Support Building (TSB-2) 2018 Yes 116,583 TSB-2 (Building 2701) is s a three-story training and support facility located to the south of Building 2314 and close to the entrance to X-Ray South. This locates the building as close as possible for the Support Systems Complex (SSC) and its utilities. The warehouse and SSC have access through a door on the east side and have all the external equipment tanks located under a canopy structure. The access to the high bay is through a door on the south end of the facility for large truck and vehicles. The main entrance is located on the north side of the building directly across from the entrance to Building 2314. Contains high bay with Engineroom Team Trainer (ERTT) simulators.

-Exterior wall system are cast-in-place architectural finished concrete with a horizontal ribbed form liner and form ties that form a pattern on the elevation. Walls are designed to meet blast resistant criteria. The building exterior does not have any windows, interior borrowed light windows are 1/4-inch wire glass in a hollow meteral frames, where located in 1-hour fire walls and 1/4-inch tempered glass in a hollow metal frames at nonrated walls.

-Exterior doors are heavy duty steel construction designed to meet blast resistant criteria. Exterior doors are provided with automatic closers and panic hardware as need for code egress compliance. UL-listed interior fire doors are located and installed in conformance to NFPA No. 80, "Fire Doors and Windows."

-Roofing System: Two ply granular surface modified bitumen roof system over a ½-inch glass mat gypsum cover board and five inches of polyisocyanurate insulation.

2711 Training Support Building (TSB-2A) 2018 Yes 126,400 TSB-2A (Building 2711) is a three-story training and support facility located to the west of Building 2314 and to the north of the SAEP and is designated an Operational Training Facility. The auditorium and cafeteria are located on the south and east sides of the building to be closest to the campus quad and other buildings for ease of personnel access. There is a dumpster complex in the northeast corner of the new parking lot located close to the north gate for access from the secure side. There are gates and concrete screen walls around the dumpsters. The Hazardous Material Storage Area is located north of TSB-2 inside the secure fence. The Hazardous Waste Storage Area is located in the northeast corner of the parking lot. This is required to be located outside the K-30 arc for Wharf alpha so they need to be on the north side of the site.

-Exterior wall system are cast-in-place architectural finished concrete with a horizontal ribbed form liner and form ties that form a pattern on the elevation. Walls are designed to meet blast resistant criteria. The building exterior does not have any windows, interior borrowed light windows are 1/4-inch wire glass in a hollow meteral frames, where located in 1-hour fire walls and 1/4-inch tempered glass in a hollow metal frames at nonrated walls.

-Exterior doors are heavy duty steel construction designed to meet blast resistant criteria. Exterior doors are provided with automatic closers and panic hardware as need for code egress compliance. UL-listed interior fire doors are located and installed in conformance to NFPA No. 80, "Fire Doors and Windows."

-Roofing System: Two ply granular surface modified bitumen roof system over a ½-inch glass mat gypsum cover board and five inches of polyisocyanurate insulation.

Appendix E - Facility Inventory - RP and Non-RP

&P

FOR OFFICIAL USE ONLY