Amendment 03 Requirments Document 1 July.pdf

Requirements Document 1 July 2021

6x - 20ft x 8.5ft ISO Cargo Container with the minimum following specifications:

Type 4 Double Doors One End & Double Doors One Side ISO Cargo Container Corrugated steel side, roof Swing doors on (1) end and (1) side

(2) sets of forklift pockets, laden and unladen 1 1/8" thick marine plywood floors, forklift o tested to 16,000 lbs per 44 square inches Wall tie down steel lashing rings, o 4,000 lbs. cap. each (20 total) tested at 6,000 lbs.

Front corner post tie downs (10 total) Door corner post tie downs o restraint system, shoring slot will support 2” x 6” lumber Vents, (2) each 383 Green exterior CARC paint Required payload of 60,000 pounds or greater Cubic Capacity of 1,140 Cu. Ft.

Front door openings 7’ 6 3/64” height, 7’ 7 54/64” width Side door openings 7’ 6 7/16” height, 7’ 8 1/8" width Must be have ISO Certified plating Shipping FOB Destination to Hurlburt Field

10x – 10ft x 8.5ft Bicon, Type 1 Container with the minimum following specifications:

Type 1 Bicon Container Corrugated steel sides, and roof 14 gauge locking steel double end swing doors 1 1/8” thick marine plywood floors o Forklift tested to 16,000 lbs per 44 square inches Tie down steel lashing rings, 4000 lbs. cap. each Two way fork lift pockets Two Vents 383 Green exterior CARC paint Required payload of 23,000 pounds or greater Cubic Capacity of 561 Cu. Ft.

Front door opening 7’ 5 11/16” height, 7’ 8 11/64” width Must be have ISO Certified plating Shipping FOB Destination to Hurlburt Field