Amendment 02 Requirements Document 28 June 2021.pdf

Requirements Document 28 June 2021

6x - 20ft x 8ft ISO Cargo Container with the minimum following specifications:

• Type 4 Double Doors One End & Double Doors One Side ISO Cargo Container

• Corrugated steel side, roof

• Swing doors on (1) end and (1) side

• (2) sets of forklift pockets, laden and unladen

• 1 1/8" thick marine plywood floors, forklift o tested to 16,000 lbs per 44 square inches

• Wall tie down steel lashing rings, o 4,000 lbs. cap. each (20 total) tested at 6,000 lbs.

• Front corner post tie downs (10 total)

• Door corner post tie downs o restraint system, shoring slot will support 2” x 6” lumber

• Vents, (2) each

• 383 Green exterior CARC paint

• Required payload of 62,000 pounds or greater

• Cubic Capacity of 1,069 Cu. Ft.

• Front door openings 7’ height, 7’ 8 1/8” width

• Side door openings 7’ 21/64” height, 7’ 8 1/4" width

• Must be have ISO Certified plating

• Shipping FOB Destination to Hurlburt Field

10x – 10ft x 8.5ft Bicon, Type 1 Container with the minimum following specifications:

• Type 1 Bicon Container

• Corrugated steel sides, and roof

• 14 gauge locking steel double end swing doors

• 1 1/8” thick marine plywood floors o Forklift tested to 16,000 lbs per 44 square inches

• Tie down steel lashing rings, 4000 lbs. cap. each

• Two way fork lift pockets

• Two Vents

• 383 Green exterior CARC paint

• Required payload of 23,000 pounds or greater

• Cubic Capacity of 561 Cu. Ft.

• Front door opening 7’ 5 11/16” height, 7’ 8 11/64” width

• Must be have ISO Certified plating

• Shipping FOB Destination to Hurlburt Field