Attachment 3 - Questions and Answers.pdf
PDF 2 MB Posted
- Attached to
- 80 FTW CASS Rotary Screw Air Compressors
- Solicitation number
- FA302026Q0122
About this file
This is a Questions and Answers document for Air Force Solicitation FA302026Q0122 addressing contractor inquiries regarding the replacement of compressor units at a flightline facility.
The requirement involves replacing two of three non-functional compressor units (Compressors 2, 3, and 4), with Compressor 1 remaining operational and in place. Replacement units must be compatible with existing infrastructure without requiring modifications to power supply or compressed air line systems. The concrete pad measures 45 feet by 16 feet, with current unit dimensions of 76 inches by 169 inches. Key site constraints include a chain link fence, small building, and CASS Dryer adjacent to the units. Crane access is required from the flightline side, with approximately 55 feet distance from crane setup area to the last compressor. Contractors must include crane and forklift costs in their pricing, as the Government will not provide this equipment. Delivery time must be included in quotes. Replacement units must comply with DAF CC Part 23 regarding elimination of Class 1 ozone-depleting substances and FAR 52.223-23 Sustainable Products requirements. Container preference (open or closed) is not specified. Site dimensions provided include rear clearance of 174 inches and pipe spacing of 117 inches between rear base plates.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 3 - Questions and Answers
Solicitation# FA302026Q0122 (SAM.gov)
1. Will the replacement of the integrated dryers need to be included in the bid, or will the original dryers remain in place?
No, the current CASS Dryer will remain in place.
2. Are there pictures available of the units currently in place?
Yes, please see photos included below.
3. Are there any objects blocking the removal of the units?
There is a chain link fence around the units, a small building on the right and the CASS Dryer on the left of the units.
Crane will be needed - must come in from on the front (flightline) side. The distance from the area where the crane can set up to the last compressor to be replaced is about 55 feet. *Note: Crane and forklift will NOT be provided by the Government;
quotes should include this in their pricing.
4. Can provide more details on the installation requirements and site conditions?
There are 4 total existing units. Compressor 1 is functional and will remain as-is.
This requirement is to replace two of the three remaining non-working units – contractor has discretion on which two of these three: Compressors 2, 3, and 4.
-The replacement units must be compatible with the current system and should not require modifications to the existing power supply or compressed air line infrastructure.
-Existing infrastructure will not be replaced or changed.
-Key site dimensions are provided below:
-Concrete pad: 45 ft x 16 ft
-Current unit size: 76 in x 169 in
-Rear clearance: 174 in (measured from the base plate of the vertical pipe at the rear of the unit to the edge of the concrete pad)
-Pipe spacing: 117 in (measured between the base plates of the rear pipes for each unit)
5. Is anticipated delivery time needed?
Yes, include delivery time on the quote.
6. Do the compressor containers have to be closed or open?
No preference
7. Is energy efficient exhaust required?
Products must be compliant with DAF CC Part 23, Elimination of Use of Class 1 Ozone Depleting Substances and 52.223-23 Sustainable Products. (Deviation 2026- O0038) – see Attachment 1: Provisions and Clauses
Photos:
2 3
3 4
File details come from the government source that posted it. Updated .