generator_reprogramming_Q&A_posted_on_FBO.docx

Generator Reprogramming [Type here] FA301619U0010 1). What type of switch gear is needed?

Government Answer:

- This project is only requesting to correct the PLC controller to fit with the new condition of the Power plan. It is not installation/or replace the switchgear, ATS

2). Will the load have to be adjusted?

Government Answer:

- Generator operation, Two (2) each generator is 750KW, GEN will be alternate started. Running GEN will be continues provide the power within 70% of the full load (Around 525KW). The second GEN will be running/adding into the system when the facility load start above 525KW.

3). Do we have a list of all of the loads?

Government Answer:

-No need, programmer based on the load on GENs

4). Is the whole building (331) on a backup generator?

Government Answer:

- Temporary is true. This Power Plan is support for the Bldg. 316 New Facility (Not full load yet).

5). Where are all of the breakers opened?

Government Answer:

-The switches located in the outside cabinet. Circuits coming both red closed, Generator and tie breaker both green open. (normal)

6). How much of the load are the 2 generators sustaining?

Government Answer:

-Each GEN can provide MAX=350KW.

7). Do you have circulating diesel Government Answer:

- Pumped from storage tank to day tank. These on a separate PLC system.

8). What is the delay time in generator start up?

Governmentr Answer -5-10Sec.