Attachment 14 - MAHG121108 Repair Repaint Convault Tanks - Addendum 1.pdf
PDF 94 KB Posted
- Attached to
- Repair and Repaint Convault Tanks
- Solicitation number
- FA301023R0023
About this file
This addendum modifies the scope of work for a contract to repair and repaint convault tanks at Keesler Air Force Base in Mississippi. The addendum removes convault tank B404 from the requirement and changes the paint specifications. The contractor will repair cracks in concrete shells for tanks at various locations and remove water and fuel buildup from interstitial spaces. The contractor will repaint tanks at multiple locations using an acrylic latex paint in accordance with the manufacturer's instructions. One coat of primer and one coat of paint will be applied to all exterior surfaces except bottoms of the tanks, including vent piping and emergency vents. The related federal contract opportunity is a pre-solicitation to repair and repaint convault tanks with solicitation number FA301023R0023 issued by the Department of the Air Force Air Education and Training Command.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ADDENDUM 1 Date: August 28, 2023
PROJECT NAME: Convault Tanks Project
LOCATION: Keesler AFB, Mississippi
PROJECT NUMBER: MAHG12-1108
WORK ORDER #: 12838970
Change to SCOPE:
This addendum is to remove convault tank B404 from the requirement and update paint specifications.
Changes to 3.2.4 SCOPE:
MODIFY EXISTING:
A. For tanks at B229, B243, B404, B2801, B2804, B3520, B3902, B6009, B6602, and B6960, contractor shall repair cracks in the concrete shell.
B. For tanks at B229, B243, B404, B2801, B2804, B4261, B6009, B6602, and B6960, contractor shall remove the water and fuel build up from the interstitial space.
PROVIDE AND INSTALL NEW:
B. For tanks at B229, B243, B404, B2801, B2804, B3520, B3902, B4261, B6009, B6602, B6642, B6960, B7301, and B7721 contractor shall repaint the tanks per the requirement below.
a. The Contractor is responsible for preparation, priming and painting of all of the exterior surfaces (except bottom) of the storage tanks, including vent piping, emergency vents etc. One coat of primer and one coat of paint shall be done. A two-part epoxy-based paint or 100% acrylic enamel An acrylic latex paint shall be used. All exposed exterior surfaces shall be clean of all rust, corrosion, scale, blisters, oil, loose paint, etc. so as to meet the approved paint manufacturer’s requirements prior to application of any primer or paint. The contractor shall prepare the surface and apply each coat of primer and paint in strict accordance with the approved paint manufacturer’s instructions.
END OF ADDENDUM #1
File details come from the government source that posted it. Updated .