08_-_UFGS_14_24_13.pdf

USACE / NAVFAC / AFCEC / NASA UFGS- 14 24 13 ( May 2016) Change 1- 05/ 18 Pr epar i ng Act i v i t y: NAVFAC Super sedi ng UFGS- 14 24 00 ( August 2010)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Apr i l 2019

SECTI ON TABLE OF CONTENTS

DI VI SI ON 14 - CONVEYI NG EQUI PMENT

HYDRAULI C FREI GHT ELEVATORS

05/16

PART 1 GENERAL

1. 1 REFERENCES

1. 2 SUBMI TTALS

1. 2. 1 Shop Dr awi ng Requi r ement s

1. 2. 2 Pr oduct Dat a Requi r ement s

1. 2. 3 Desi gn Dat a

1. 2. 3. 1 React i on Loads

1. 2. 3. 2 Heat Loads

1. 2. 3. 3 Emer gency Power Syst ems

1. 2. 4 Wel der s ' Requi r ement s

1. 2. 5 Mai nt enance Cont r ol Pr ogr am ( MCP)

1. 3 QUALI TY ASSURANCE

1. 3. 1 Qual i f i cat i on

1. 3. 1. 1 El evat or Cont r act or ' s El evat or Techni c i ans

1. 3. 2 Manuf act ur er s ' Techni cal Suppor t

1. 3. 3 Oper at i on and Mai nt enance Dat a

1. 3. 4 Wi r i ng Di agr ams

1. 3. 5 Machi ne Room/ Cont r ol Room Cabi net

1. 4 NEW I NSTALLATI ON SERVI CE

1. 4. 1 Per i odi c El evat or Cer t i f i cat i on I nspect i on and Test i ng

1. 5 FI RE PROTECTI ON SYSTEM

1. 5. 1 Fi r e Al ar m I ni t i at i ng Devi ces

1. 5. 2 Fi r e Spr i nkl er s

1. 5. 3 Shunt Tr i p Di sconnect

PART 2 PRODUCTS

2. 1 ELEVATOR DESCRI PTI ON

2. 1. 1 El evat or Desi gn Par amet er s

2. 1. 2 Cab Encl osur e and Hoi st way Ent r ance Assembl i es

2. 2 ELEVATOR OPERATI ON

2. 2. 1 Si ngl e, Two- St op, Aut omat i c Oper at i on

2. 2. 2 Sel ect i ve Col l ect i ve Aut omat i c Oper at i on

2. 2. 3 Dupl ex Sel ect i ve Col l ect i ve Aut omat i c Oper at i on

2. 2. 4 Gr oup Aut omat i c Oper at i on

2. 3 SPECI AL OPERATI ON AND CONTROL

SECTI ON 14 24 13 Page 1

2. 3. 1 Keys f or El evat or Key Swi t ches

2. 3. 2 Fi r ef i ght er s ' Emer gency Oper at i on ( FEO)

2. 3. 2. 1 Fi r ef i ght er s ' Emer gency Oper at i on ( FEO) Key Box

2. 3. 3 Hoi st way Access Oper at i on

2. 3. 4 I n- Car I nspect i on Oper at i on

2. 3. 5 I ndependent Ser vi ce

2. 3. 6 Sel ect i ve Door Oper at i on

2. 3. 7 El evat or Emer gency Power Oper at i on

2. 3. 8 El evat or Auxi l i ar y Power Oper at i ng Syst em

2. 4 ELEVATOR DRI VE SYSTEM

2. 4. 1 Hydr aul i c Pump Uni t

2. 4. 1. 1 Pump Mot or

2. 4. 2 Hydr aul i c Cont r ol s and Equi pment

2. 4. 2. 1 Hydr aul i c Cont r ol Val ve

2. 4. 2. 2 Hydr aul i c Over speed Saf et y Val ve

2. 4. 3 Hydr aul i c Pi pi ng and Accessor i es

2. 4. 3. 1 Cont ai nment of Hydr aul i c Oi l Suppl y Li ne

2. 4. 4 Hydr aul i c El evat or Type

2. 4. 4. 1 Cyl i nder - Pl unger ( Jack) Uni t

2. 4. 5 Cyl i nder Wel l Syst em

2. 4. 5. 1 Wel l Casi ng

2. 4. 5. 2 PVC or HDPE Li ner

2. 4. 5. 3 Cyl i nder I nst al l at i on

2. 4. 5. 4 Cyl i nder Li ner Moi st ur e Sensor Syst em

2. 4. 5. 5 Seal Top of Wel l Casi ng

2. 5 CONTROL EQUI PMENT

2. 5. 1 Mot or Cont r ol Equi pment

2. 5. 2 El evat or Mi cr opr ocessor Cont r ol l er

2. 5. 2. 1 El evat or Cont r ol l er I nt er f ace Cabi net

2. 5. 2. 1. 1 El evat or Mi cr opr ocessor Human I nt er f ace

2. 5. 2. 2 Sof t war e and Document at i on

2. 5. 2. 3 El evat or Cont r ol l er Cer t i f i cat i on

2. 6 OPERATI NG PANELS, SI GNAL FI XTURES, AND COMMUNI CATI ONS CABI NETS

2. 6. 1 Car and Hal l But t ons

2. 6. 1. 1 Hal l St at i on Door - Oper at i ng But t ons

2. 6. 2 Fr ei ght Car - Oper at i ng Panel

2. 6. 2. 1 Oper at or Cont r ol s

2. 6. 2. 2 Ser vi ce Cont r ol s

2. 6. 2. 3 Cer t i f i cat e Wi ndow

2. 6. 2. 4 Emer gency Si gnal i ng Devi ces

2. 6. 3 El evat or I n- Car Posi t i on I ndi cat or s

2. 6. 4 El evat or I n- Car Di r ect i on I ndi cat or s

2. 6. 5 Hal l Cal l Landi ng Fi xt ur es

2. 6. 5. 1 Desi gnat ed Landi ng Hal l Cal l Fi xt ur e

2. 6. 5. 1. 1 Locat i on of COMMUNI CATI ON MEANS FAI LURE ( CMF) Vi sual

Signal

2. 6. 5. 1. 2 COMMUNI CATI ON MEANS FAI LURE ( CMF) Vi sual and Audi bl e

Si gnal Oper at i on

2. 6. 5. 1. 3 Fi r ef i ght er s ' Emer gency Oper at i on Phase I Swi t ch and

Vi sual Si gnal

2. 6. 6 El evat or Car Posi t i on and Di r ect i on I ndi cat or s and Car Ar r i val

Signal

2. 6. 7 Desi gnat ed Landi ng El evat or I dent i f i cat i on Fi xt ur e

2. 6. 8 Emer gency or St andby Power

2. 7 CAR DOOR EQUI PMENT

2. 7. 1 Car Door Oper at or

2. 7. 2 I nf r a- r ed Cur t ai n Uni t

2. 8 FREI GHT ELEVATOR GUI DES, PLATFORM, AND ENCLOSURE

2. 8. 1 Gui des

SECTI ON 14 24 13 Page 2

2. 8. 2 Car Shel l Ret ur n Panel s, Door s, Ent r ance Col umns, and Tr ansom

2. 8. 3 Car Encl osur e Top

2. 8. 4 Car Door

2. 8. 5 Car Ent r ance Si l l

2. 8. 6 I n- Car Hor i zont al Buck- Boar d Wal l Pr ot ect i on

2. 8. 7 Cab Fi ni sh Fl oor

2. 8. 8 Car Fan

2. 8. 9 Car Li ght i ng

2. 9 FREI GHT ELEVATOR HOI STWAY DOORS AND ENTRANCES

2. 9. 1 Hoi st way Ent r ance Fr ames

2. 9. 2 Hoi st way Ent r ance Si l l s

2. 10 HOI STWAY EQUI PMENT

2. 10. 1 Car Gui de Rai l s and Fast eni ngs

2. 10. 2 Pi t Equi pment

2. 10. 3 Pi t " STOP" Swi t ch

2. 10. 4 Tr avel i ng Cabl es

2. 10. 5 Hoi st way Pi t Ladder

PART 3 EXECUTI ON

3. 1 I NSTALLATI ON

3. 1. 1 St r uct ur al Member s and Fi ni sh Mat er i al s

3. 1. 2 Mi scel l aneous Requi r ement s

3. 2 FI ELD QUALI TY CONTROL

3. 3 ACCEPTANCE I NSPECTI ON, TESTI NG AND COMMI SSI ONI NG

3. 3. 1 Accept ance I nspect i on Suppor t

3. 3. 2 Test i ng Mat er i al s and I nst r ument s

3. 3. 3 Fi el d Test s

3. 3. 3. 1 Endur ance Test s

3. 3. 3. 2 Speed Test s

3. 3. 3. 3 Level i ng Test s

3. 3. 3. 4 Temper at ur e Ri se Test s

3. 3. 3. 5 Mot or Amper e Test s

3. 3. 3. 6 El evat or Per f or mance and Ri de Qual i t y Test i ng

3. 3. 3. 7 Hydr aul i c Saf et y Val ve ( Aut omat i c Shut of f Val ve) Test s

3. 3. 3. 8 Hydr aul i c Pr essur e Test s

3. 3. 3. 9 Pr essur e Test of Li ner / Cyl i nder Assembl y

- - End of Sect i on Tabl e of Cont ent s - -

SECTI ON 14 24 13 Page 3

USACE / NAVFAC / AFCEC / NASA UFGS- 14 24 13 ( May 2016) Change 1- 05/ 18 Pr epar i ng Act i v i t y: NAVFAC Super sedi ng UFGS- 14 24 00 ( August 2010)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Apr i l 2019

SECTI ON 14 24 13

HYDRAULI C FREI GHT ELEVATORS

05/16

NOTE: Thi s gui de speci f i cat i on cover s t he r equi r ement s f or hydr aul i c f r ei ght el evat or s.

Adher e t o UFC 1- 300- 02 Uni f i ed Faci l i t i es Gui de Speci f i cat i ons ( UFGS) For mat St andar d when edi t i ng t hi s gui de speci f i cat i on or pr epar i ng new pr oj ect speci f i cat i on sect i ons. Edi t t hi s gui de speci f i cat i on f or pr oj ect speci f i c r equi r ement s by addi ng, del et i ng, or r evi s i ng t ext . For br acket ed i t ems, choose appl i cabl e i t em( s) or i nser t appr opr i at e i nf or mat i on.

Remove i nf or mat i on and r equi r ement s not r equi r ed i n r espect i ve pr oj ect , whet her or not br acket s ar e present.

Comment s, suggest i ons and r ecommended changes f or t hi s gui de speci f i cat i on ar e wel come and shoul d be submi t t ed as a Cr i t er i a Change Request ( CCR) .

NOTE: Al l Ar my and Navy f aci l i t y desi gns whi ch i ncl ude el evat or s shal l compl y wi t h t he " NAVFAC I TG 2013- 01 El evat or Desi gn" . Thi s gui de i s avai l abl e f r om t he NAVFAC f aci l i t at or ( http://www.wbdg.org/ffc/navy-navfac/interim-technical-guidance-itg ) under I nt er i m Techni cal Gui dance.

NOTE: For NAVY pr oj ect s, any edi t i ng of non- br acket ed r equi r ement s i n t hi s speci f i cat i on shal l be appr oved t hr ough t he NAVFAC FEC VTE Pr ogr am Lead Cer t i f y i ng Of f i c i al .

SECTI ON 14 24 13 Page 4

PART 1 GENERAL

1. 1 REFERENCES

NOTE: Thi s par agr aph i s used t o l i s t t he publ i cat i ons c i t ed i n t he t ext of t he gui de speci f i cat i on. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by basi c desi gnat i on onl y and l i s t ed i n t hi s par agr aph by or gani zat i on, desi gnat i on, dat e, and t i t l e.

Use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e when you add a Ref er ence I dent i f i er ( RI D) out s i de of t he Sect i on' s Ref er ence Ar t i c l e t o aut omat i cal l y pl ace t he r ef er ence i n t he Ref er ence Ar t i c l e. Al so use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e t o updat e t he i ssue dat es.

Ref er ences not used i n t he t ext wi l l aut omat i cal l y be del et ed f r om t hi s sect i on of t he pr oj ect speci f i cat i on when you choose t o r econci l e r ef er ences i n t he publ i sh pr i nt pr ocess.

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN WELDI NG SOCI ETY ( AWS)

AWS D1. 1/ D1. 1M ( 2015; Er r at a 1 2015; Er r at a 2 2016) St r uct ur al Wel di ng Code - St eel

ASME I NTERNATI ONAL ( ASME)

ASME A17. 1/ CSA B44 ( 2016) Saf et y Code f or El evat or s and Escalators

ASME A17. 2 ( 2017) Gui de f or I nspect i on of El evat or s, Escal at or s, and Movi ng Wal ks I ncl udes I nspect i on Pr ocedur es f or El ect r i c Tr act i on and Wi ndi ng Dr um El evat or s, Hydr aul i c El evat or s, and Escal at or s and Movi ng Wal ks

ASME B16. 11 ( 2016) For ged Fi t t i ngs, Socket - Wel di ng and Threaded

ASME B16. 9 ( 2018) Fact or y- Made Wr ought But t wel di ng Fittings

ASTM I NTERNATI ONAL ( ASTM)

ASTM A106/ A106M ( 2018) St andar d Speci f i cat i on f or Seaml ess Car bon St eel Pi pe f or Hi gh- Temper at ur e Service

ASTM A53/ A53M ( 2018) St andar d Speci f i cat i on f or Pi pe, SECTI ON 14 24 13 Page 5

St eel , Bl ack and Hot - Di pped, Zi nc- Coat ed, Wel ded and Seaml ess

I NSTI TUTE OF ELECTRI CAL AND ELECTRONI CS ENGI NEERS ( I EEE)

I EEE C62. 41 ( 1991; R 1995) Recommended Pr act i ce on Sur ge Vol t ages i n Low- Vol t age AC Power Circuits

I NTERNATI ONAL CODE COUNCI L ( I CC)

I CC I BC ( 2018) I nt er nat i onal Bui l di ng Code

NATI ONAL ELEVATOR I NDUSTRY, I NC. ( NEI I )

NEII-1 ( 2000; R t hr u 2017) Bui l di ng Tr anspor t at i on St andar ds and Gui del i nes, i ncl udi ng t he Per f or mance St andar ds Mat r i x f or New El evat or I nst al l at i on

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 101 ( 2018; TI A 18- 1; TI A 18- 2; TI A 18- 3) Li f e Saf et y Code

NFPA 70 ( 2017; ERTA 1- 2 2017; TI A 17- 1; TI A 17- 2;

TI A 17- 3; TI A 17- 4; TI A 17- 5; TI A 17- 6;

TI A 17- 7; TI A 17- 8; TI A 17- 9; TI A 17- 10;

TI A 17- 11; TI A 17- 12; TI A 17- 13; TI A

17- 14; TI A 17- 15; TI A 17- 16; TI A 17- 17 )

Nat i onal El ect r i cal Code

NFPA 70E ( 2018; TI A 18- 1; TI A 81- 2) St andar d f or El ect r i cal Saf et y i n t he Wor kpl ace

NFPA 72 ( 2019; TI A 19- 1; ERTA 2019) Nat i onal Fi r e Al ar m and Si gnal i ng Code

U. S. DEPARTMENT OF DEFENSE ( DOD)

UFC 3- 560- 01 ( 2017, wi t h Change 1, 2018) Oper at i ons and Mai nt enance: El ect r i cal Saf et y

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

36 CFR 1191 Amer i cans wi t h Di sabi l i t i es Act ( ADA) Accessi bi l i t y Gui del i nes f or Bui l di ngs and Faci l i t i es; Ar chi t ect ur al Bar r i er s Act ( ABA) Accessi bi l i t y Gui del i nes

1. 2 SUBMITTALS

NOTE: Revi ew Submi t t al Descr i pt i on ( SD) def i ni t i ons i n Sect i on 01 33 00 SUBMI TTAL PROCEDURES and edi t t he f ol l owi ng l i s t t o r ef l ect onl y t he submi t t al s r equi r ed f or t he pr oj ect .

The Gui de Speci f i cat i on t echni cal edi t or s have

SECTI ON 14 24 13 Page 6 desi gnat ed t hose i t ems t hat r equi r e Gover nment appr oval , due t o t hei r compl exi t y or cr i t i cal i t y , wi t h a " G. " Gener al l y, ot her submi t t al i t ems can be r evi ewed by t he Cont r act or ' s Qual i t y Cont r ol Syst em. Onl y add a " G" t o an i t em, i f t he submi t t al i s suf f i c i ent l y i mpor t ant or compl ex i n cont ext of t he pr oj ect .

For submi t t al s r equi r i ng Gover nment appr oval on Ar my pr oj ect s, a code of up t o t hr ee char act er s wi t hi n t he submi t t al t ags may be used f ol l owi ng t he " G" desi gnat i on t o i ndi cat e t he appr ovi ng aut hor i t y.

Codes f or Ar my pr oj ect s usi ng t he Resi dent Management Syst em ( RMS) ar e: " AE" f or Ar chi t ect - Engi neer ; " DO" f or Di st r i c t Of f i ce ( Engi neer i ng Di v i s i on or ot her or gani zat i on i n t he Di st r i c t Of f i ce) ; " AO" f or Ar ea Of f i ce; " RO" f or Resi dent Of f i ce; and " PO" f or Pr oj ect Of f i ce. Codes f ol l owi ng t he " G" t ypi cal l y ar e not used f or Navy, Ai r For ce, and NASA pr oj ect s.

The " S" f ol l owi ng a submi t t al i t em i ndi cat es t hat t he submi t t al i s r equi r ed f or t he Sust ai nabi l i t y eNot ebook t o f ul f i l l f eder al l y mandat ed sust ai nabl e r equi r ement s i n accor dance wi t h Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Locat e t he " S" submi t t al under t he SD number t hat best descr i bes t he submi t t al i t em.

Choose t he f i r st br acket ed i t em f or Navy, Ai r For ce and NASA pr oj ect s, or choose t he second br acket ed i t em f or Ar my pr oj ect s.

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e [ f or Cont r act or Qual i t y Cont r ol appr oval . ] [ f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . ] Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance wi t h Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on

01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

El evat or Syst em; G[ , [ _____] ]

El evat or Component s; G[ , [ _____] ]

El evat or Machi ne; G[ , [ _____] ]

El evat or Cont r ol l er ; G[ , [ _____] ]

Wi r i ng Di agr ams; G[ , [ _____] ]

SD- 03 Pr oduct Dat a

NOTE: For Ar my pr oj ect s, del et e t he br acket ed

SECTI ON 14 24 13 Page 7 i t ems. For Navy pr oj ect s, keep t he br acket ed i t ems.

El evat or and Accessor i es[ ; G[ , [ _____] ] ]

El evat or Component s[ ; G[ , [ _____] ] ]

Dat a Sheet s[ ; G[ , [ _____] ] ]

El evat or Mi cr opr ocessor Cont r ol l er ; G[ , [ _____] ]

SD- 05 Desi gn Dat a

Emer gency Power Syst ems

Heat Loads

React i on Loads

SD- 07 Cer t i f i cat es

El evat or Par t s and Component s pr i ce l i s t s; G[ , [ _____] ]

Warranty

Endor sement Let t er

Wel der s ' Qual i f i cat i ons

El evat or Cont r ol l er Cer t i f i cat i on; G[ , [ _____] ]

SD- 10 Oper at i on and Mai nt enance Dat a

El evat or , Dat a Package 4; G[ , [ _____] ]

Mai nt enance Cont r ol Pr ogr am ( MCP) ; G[ , [ _____] ]

Sof t war e and Document at i on; G[ , [ _____] ]

Submi t i n accor dance wi t h Sect i on 01 78 23 OPERATI ON AND MAI NTENANCE DATA and 01 78 24. 05 20 FACI LI TY OPERATI ON AND

MAI NTENANCE SUPPORT I NFORMATI ON.

1. 2. 1 Shop Dr awi ng Requi r ement s

Pr ovi de assembl y and ar r angement of el evat or s, accessor i es, and el evat or component s. Show l ocat i on of el evat or machi ne i n el evat or machi ne r oom ( MR) or i n el evat or machi ner y space ( MS) . Show l ocat i on of el evat or cont r ol l er i n el evat or machi ne r oom or el evat or cont r ol r oom ( CR) . Pr ovi de det ai l s f or mat er i al s and equi pment , i ncl udi ng but not l i mi t ed t o oper at i ng and si gnal f i x t ur es, door s, door and car f r ames, car encl osur e, cont r ol l er s, mot or s, gui de r ai l s and br acket s, l ayout of hoi st way i n pl an and el evat i on, and ot her l ayout i nf or mat i on and cl ear ance di mensi ons.

1. 2. 2 Pr oduct Dat a Requi r ement s

Pr ovi de manuf act ur er s ' pr oduct dat a f or al l el evat or component s, i ncl udi ng but not l i mi t ed t o t he f ol l owi ng: el evat or cont r ol l er , hydr aul i c pump uni t , hydr aul i c pump and mot or , hydr aul i c cyl i nder , hydr aul i c pi pi ng and

SECTI ON 14 24 13 Page 8 f i t t i ngs, car and hal l f i x t ur e but t ons and swi t ches, cab and machi ne r oom or cont r ol r oom communi cat i on devi ces, door oper at or , door pr ot ect i on syst em, car r ol l er gui des, and buf f er s. For dat a sheet s, pr ovi de document i dent i f i cat i on number or bul l et i n number , publ i shed or copyr i ght ed pr i or t o t he dat e of cont r act bi d openi ng. Pr ovi de cont r ol l er manuf act ur er ' s publ i shed pr ocedur es f or per f or mance of each and al l t est i ng r equi r ed by

ASME A17. 1/ CSA B44.

1. 2. 3 Desi gn Dat a

1. 2. 3. 1 React i on Loads

Pr ovi de cal cul at i ons by r egi st er ed pr of essi onal engi neer f or r eact i on l oads i mposed on bui l di ng by el evat or syst em. Demonst r at e cal cul at i ons compl yi ng with ASME A17. 1/ CSA B44

1. 2. 3. 2 Heat Loads

Pr ovi de cal cul at i ons f r om el evat or manuf act ur er , or by r egi st er ed pr of essi onal engi neer , f or t ot al ant i c i pat ed heat l oads gener at ed by al l of t he el evat or equi pment .

1. 2. 3. 3 Emer gency Power Syst ems

Wher e t he f aci l i t y does have an emer gency power syst em, conf i r m t he el evat or s t hat wi l l be connect ed t o t he emer gency power syst em. Conf i r m t he compl et e emer gency power syst em and sequence of oper at i on f or al l el evat or s, i ncl udi ng oper at i on of t he el evat or l obby manual sel ect i on swi t ch. Pr ovi de wi r i ng di agr ams f or bui l di ng emer gency power i nt er f ace wi t h el evat or cont r ol s. For el evat or s not suppl i ed by an emer gency power syst em, pr ovi de manuf act ur er s ' pr oduct dat a f or auxi l i ar y power syst ems.

1. 2. 4 Wel der s ' Requi r ement s

Compl y wi t h AWS D1. 1/ D1. 1M, Sect i on 5. I ncl ude cer t i f i ed copi es of f i el d wel der s ' qual i f i cat i ons. Li st wel der s ' names wi t h cor r espondi ng code mar ks t o i dent i f y each wel der ' s wel di ng wor k.

1. 2. 5 Mai nt enance Cont r ol Pr ogr am ( MCP)

For each el evat or , pr epar e and pr ovi de a wr i t t en Mai nt enance Cont r ol Pr ogr am ( MCP) t hat compl i es wi t h ASME A17. 1/ CSA B44 Sect i on 8. 6, i ncl udi ng wr i t t en document at i on t hat det ai l s t he t est pr ocedur es f or each and ever y t est t hat i s r equi r ed t o be per f or med by ASME A17. 1/ CSA B44. Assembl e al l MCP document at i on, and suppor t i ng t echni cal at t achment s, i n a s i ngl e MCP package and pr ovi de i n bot h el ect r oni c and har d copy. Assembl e ent i r e har d copy MCP i n 3- r i ng bi nder s. For each el evat or pr ovi ded, t he MCP must i ncl ude onl y document at i on and i nst r uct i on t hat appl y t o t he el evat or specified.

For each el evat or , pr ovi de an addi t i onal , separ at e bi nder t hat i ncl udes al l mai nt enance, r epai r , r epl acement , cal l back, and ot her r ecor ds r equi r ed by ASME A17. 1/ CSA B44. The r ecor ds bi nder must be kept i n t he el evat or mechani cal r oom, mai nt ai ned by el evat or mai nt enance and ser vi ce per sonnel , and be avai l abl e at al l t i mes t o aut hor i zed per sonnel .

Pr ovi de det ai l ed i nf or mat i on r egar di ng emer gency ser vi ce pr ocedur es and el evat or i nst al l at i on company per sonnel cont act i nf or mat i on. Pr ovi de a l i s t i ng of al l t ool s t o be pr ovi ded t o t he Cont r act i ng Of f i cer as

SECTI ON 14 24 13 Page 9 component s of t he el evat or syst em.

1. 3 QUALI TY ASSURANCE

1. 3. 1 Qualification

Pr ovi de a desi gned and engi neer ed el evat or syst em by an el evat or cont r act or r egul ar l y engaged i n t he i nst al l at i on of el evat or syst ems. Pr ovi de el evat or component s manuf act ur ed by compani es r egul ar l y engaged i n t he manuf act ur e of el evat or component s. Ut i l i ze onl y l i censed and cer t i f i ed el evat or per sonnel f or t he i nst al l at i on, adj ust i ng, t est i ng, and ser vi c i ng of t he el evat or s.

1. 3. 1. 1 El evat or Cont r act or ' s El evat or Techni c i ans

For el evat or i nst al l at i ons i n t he Uni t ed St at es, i ncl udi ng Uni t ed St at es t er r i t or i es, per f or m al l el evat or r el at ed wor k under t he di r ect gui dance of a st at e cer t i f i ed el evat or t echni c i an wi t h a mi ni mum of t hr ee year s of exper i ence i n t he i nst al l at i on of el evat or syst ems of t he t ype and compl exi t y speci f i ed i n t he cont r act document s. Pr ovi de an endor sement l et t er f r om t he el evat or manuf act ur er , cer t i f y i ng t hat t he el evat or speci al i s t i s qual i f i ed. Al l el evat or t echni c i ans must car r y a cur r ent cer t i f i cat i on i ssued by one of t he f ol l owi ng or gani zat i ons:

a. Nat i onal Associ at i on of El evat or Cont r act or s ( NAEC)

b. Nat i onal El evat or I ndust r y Educat i on Pr ogr am ( NEI EP)

1. 3. 2 Manuf act ur er s ' Techni cal Suppor t

Pr ovi de el evat or component s f r om manuf act ur er s t hat pr ovi de f act or y t r ai ni ng and onl i ne and l i ve t el ephone el evat or t echni cal suppor t t o any el evat or i nst al l at i on, ser vi ce, and mai nt enance cont r act or . Pr ovi de el evat or component s f r om manuf act ur er s t hat guar ant ee accessi bi l i t y t o al l r epl acement and r epai r par t s and component s t o any el evat or i nst al l at i on, ser vi ce, and mai nt enance cont r act or . Use onl y el evat or component manuf act ur er s t hat pr ovi de cur r ent publ i shed pr i ce l i s t s f or al l el evat or par t s and component s.

1. 3. 3 Oper at i on and Mai nt enance Dat a

Assembl e al l shop dr awi ng and pr oduct dat a mat er i al i nt o O&M Dat a Packages i n accor dance wi t h Ar t i c l e SUBMI TTALS. Pr ovi de t wo compl et e O&M Dat a Packages i n har d copy and t wo compl et e el ect r oni c O&M dat a packages on separ at e CDs, i n PDF f or mat . Pr ovi de al l O&M Dat a Packages t o Cont r act i ng Of f i cer . I ncl ude cont r ol l er di agnost i c document at i on and sof t war e as r equi r ed under Ar t i c l e CONTROL EQUI PMENT.

1. 3. 4 Wi r i ng Di agr ams

Pr ovi de compl et e wi r i ng di agr ams and sequence of oper at i ons, whi ch show el ect r i cal connect i ons and f unct i ons of el evat or syst ems. Pr ovi de one set ( 279 mm by 432 mm11 i nch by 17 i nch mi ni mum si ze) of wi r i ng di agr ams, wi t h i ndi v i dual sheet s l ami nat ed i n pl ast i c and assembl ed i n bi nder , t o be st or ed i n t he machi ne r oom or cont r ol r oom cabi net . Pr ovi de one addi t i onal har d copy set and t wo compl et e el ect r oni c set s on separ at e CDs, i n PDF f or mat . Pr ovi de al l wi r i ng di agr am set s t o t he Cont r act i ng Of f i cer . Coded di agr ams ar e not accept abl e unl ess f ul l y i dent i f i ed.

SECTI ON 14 24 13 Page 10

1. 3. 5 Machi ne Room/ Cont r ol Room Cabi net

For st or age of O&M Dat a Packages and Wi r i ng Di agr ams, pr ovi de l ocki ng met al cabi net wi t h a mi ni mum si ze of 508 mm W by 305 mm D by 762 mm H 20 i nch W by 12 i nch D by 30 i nch H. Cabi net must be s i zed l ar ge enough t o accommodat e al l O&M Dat a and har dwar e r equi r ed i n par agr aphs OPERATI ON AND MAI NTENANCE DATA and WI RI NG DI AGRAMS. Secur e cabi net t o machi ne r oom or cont r ol r oom wal l .

1. 4 NEW I NSTALLATI ON SERVI CE

NOTE: Use Bi - weekl y opt i on f or Hospi t al s and ot her hi gh use f aci l i t i es.

Pr ovi de el evat or war r ant y ser vi ce i n accor dance wi t h t he manuf act ur er ' s mai nt enance pl an, war r ant y r equi r ement s and appl i cabl e saf et y codes, f or a per i od of 12 mont hs af t er t he dat e of accept ance by Cont r act i ng Of f i cer .

Per f or m t hi s wor k dur i ng r egul ar wor ki ng hour s. Pr ovi de suppl i es and par t s t o keep el evat or syst em i n oper at i on. Per f or m ser vi ce onl y by f act or y t r ai ned per sonnel . Pr ovi de [ Mont hl y] [ Bi - weekl y] ser vi ces t o i ncl ude r epai r s, adj ust ment s, gr easi ng, oi l i ng, and cl eani ng. Pr ovi de ser v i ce l og i n el evat or machi ne r oom or cont r ol r oom and updat e [ Mont hl y] [ Bi - weekl y] , t hr oughout t he one- year war r ant y per i od.

NOTE: One hour emer gency ser vi ce bel ow i s st andar d;

onl y use t wo hour f or r emot e l ocat i ons.

Pr ovi de 24- hour emer gency ser vi ce, wi t h [ one hour ] [ t wo hour ] on- si t e r esponse t i me, dur i ng t hi s per i od wi t hout addi t i onal cost t o t he Gover nment .

1. 4. 1 Per i odi c El evat or Cer t i f i cat i on I nspect i on and Test i ng

Pr ovi de el evat or mechani c t o suppor t [ NAVFAC ] QEI Cer t i f i ed El evat or I nspect or i n t he per i odi c s i x- mont h and t he annual Cat egor y 1 el evat or cer t i f i cat i on i nspect i on and t est i ng. Per f or m Cat egor y 1 i nspect i on and t est i ng no gr eat er t han 30 days pr i or t o t he end of t he war r ant y per i od.

Per f or m al l el evat or cer t i f i cat i on t est i ng i n t he pr esence of QEI Cer t i f i ed El evat or I nspect or .

I n conj unct i on wi t h t he t est i ng not ed above, t est syst ems f or Emer gency Power Oper at i on, Ear t hquake Emer gency Oper at i on, and Hospi t al Emer gency Commandeer i ng Ser vi ce Oper at i on, as appl i cabl e. Schedul e so t hat t est i ng does not i nt er f er e wi t h bui l di ng oper at i ons.

1. 5 FI RE PROTECTI ON SYSTEM

NOTE: Conf i r m t hat sect i ons l i s t ed t hr oughout t hi s ar t i c l e ar e par t of pr oj ect . Add or del et e sect i ons as needed f or pr oj ect .

Coor di nat e i nt er f ace bet ween bui l di ng f i r e pr ot ect i on syst em and el evat or controls.

SECTI ON 14 24 13 Page 11

Addi t i onal f i r e pr ot ect i on r equi r ement s ar e l ocat ed i n: [ Sect i on 28 31 74. 00 20 I NTERI OR FI RE DETECTI ON AND ALARM SYSTEM; ] [ Sect i on

28 31 02. 00 20 FI RE ALARM REPORTI NG SYSTEMS - DI GI TAL COMMUNI CATORS; ] [

Sect i on 21 13 13. 00 20 WET PI PE SPRI NKLER SYSTEM, FI RE PROTECTI ON; ] [ _____] and Sect i on 26 20 00 I NTERI OR DI STRI BUTI ON SYSTEM.

1. 5. 1 Fi r e Al ar m I ni t i at i ng Devi ces

Fi r e al ar m i ni t i at i ng devi ces ar e speci f i ed i n [ Sect i on 28 31 74. 00 20 I NTERI OR FI RE DETECTI ON AND ALARM SYSTEM] [ _____] , i ncl udi ng condui t and wi r i ng f r om each det ect or t o f i r e pr ot ect i on addr essabl e modul es i n el evat or machi ne r oom or cont r ol r oom.

1. 5. 2 Fi r e Spr i nkl er s

Pr ovi de f i r e spr i nkl er s i n accor dance wi t h al l appl i cabl e saf et y codes and wi t h [ Sect i on 21 13 13. 00 20 WET PI PE SPRI NKLER SYSTEM, FI RE PROTECTI ON] [ _____] . Pr ovi de shut of f val ve, check val ve, and non- adj ust abl e, zer o t i me- del ay f l ow swi t ch, i n each spr i nkl er l i ne i mmedi at el y out s i de of each machi ne r oom, cont r ol r oom, and hoi st way, as appl i cabl e. Pr ovi de i nspect or s ' t est val ve f or per i odi c t est i ng of f l ow swi t ch and shunt t r i p disconnect.

Pi pe spr i nkl er pi pi ng ser vi ng t hese spaces i n a ser i es manner wi t h no l at er al s. Locat e i nspect or s ' t est connect i on at t he end of pi pe r uns such t hat oper at i on of t he t est connect i on wi l l pur ge ai r f r om syst em pi pi ng.

1. 5. 3 Shunt Tr i p Di sconnect

Pr ovi de f l ow swi t ches speci f i ed i n par agr aph FI RE SPRI NKLERS t o compl y wi t h ASME A17. 1/ CSA B44 and NFPA 72 f or shunt t r i p of t he mai n l i ne power suppl y. For each el evat or , pr ovi de cont r ol wi r i ng connect i ng t he f l ow swi t ch t o a shunt t r i p equi pped c i r cui t br eaker l ocat ed i n t he el evat or machi ne r oom or cont r ol r oom. Upon f l ow of wat er , f l ow swi t ch wi l l i nst ant aneousl y cause openi ng of t he shunt - t r i p c i r cui t br eaker and r emove power f r om t he el evat or . Fl ow swi t ch must al so send a s i gnal t o f i r e al ar m cont r ol panel t o i ndi cat e wat er f l ow condi t i on.

PART 2 PRODUCTS

2. 1 ELEVATOR DESCRI PTI ON

Pr ovi de el evat or syst em t hat compl i es wi t h ASME A17. 1/ CSA B44 i n i t s entirety, ASME A17. 2 i n i t s ent i r et y, and addi t i onal r equi r ement s speci f i ed her ei n. Pr ovi de el evat or syst em t hat meet s or exceeds t he NEII-1 Ri de Qual i t y Per f or mance St andar ds Mat r i x ( RQPSM) . Compl y wi t h t he RQPSM " I nt er medi at e Per f or mance" cr i t er i a.

Pr ovi de and i nst al l el evat or s i n accor dance wi t h 36 CFR 1191 - ABAAS, I CC I BC, I EEE C62. 41, NFPA 70 and NFPA 101 r equi r ement s.

2. 1. 1 El evat or Desi gn Par amet er s

NOTE: Tr af f i c Anal ysi s and Mi ni mum Cab Si ze

Per f or m a t r af f i c anal ysi s and conduct i nt er v i ews wi t h t he f aci l i t y user t o det er mi ne number , s i ze, and t ype of el evat or s necessar y t o ser ve t he needs

SECTI ON 14 24 13 Page 12 of t he f aci l i t y user . For Ar my and Navy pr oj ect s, ut i l i ze NAVFAC I TG 2013- 01 El evat or Desi gn t o det er mi ne Desi gn Type. For mi ni mum el evat or speed, speci f y 0. 64 MPs 125 f pm f or 2 st or y and 0. 75 MPs 150 f pm f or 3 and 4 st or y el evat or s.

Use of a hol el ess t ype el evat or wi l l be l i mi t ed t o a maxi mum t r avel di st ance of 386 cm 12 f t - 8 i n.

a. Type: [ I n- Gr ound Di r ect Pl unger ] [ Hol el ess]

b. Rat ed l oad: [ _____] kg l b.

c. Rat ed Speed: [ 0. 64] [ 0. 75] MPs [ 125] [ 150] f pm

d. Car I nsi de Di mensi ons: [ _____] cm f t . [ _____] cm i n. wi de, [ _____] cm f t . [ _____] cm i n. deep and [ _____] cm f t . [ _____] cm i n. hi gh

e. Hoi st way Door Type & Si ze: [ Manual ] [ Power oper at ed] Ver t i cal [ Ri s i ng] [ Bi - Par t i ng] [ _____] cm f t . [ _____] cm i n. wi de and [ _____] cm f t .

[ _____] cm i n. hi gh f . Car Gat e Type: [ Manual ] [ Power oper at ed] Ver t i cal Ri s i ng

NOTE: Ref er t o ASME A17. 1/ CSA B44 f or Cl asses of loading.

g. Loadi ng Type: Cl ass [ A] [ B] [ C]

2. 1. 2 Cab Encl osur e and Hoi st way Ent r ance Assembl i es

NOTE: I f r et ai ni ng 1st opt i on i n sent ence bel ow, ensur e t hat f i ni shes ar e i ndi cat ed, most l i kel y somewher e on t he dr awi ngs. I n ei t her case, i ndi cat e f i ni sh col or s of el evat or mat er i al s i n f i ni sh schedul e on dr awi ngs.

NOTE: Speci f y st ai nl ess st eel door s, s i de panel s and wal l t r i m i n hospi t al car s.

Pr ovi de f i ni shes [ as i ndi cat ed. ] [ as l i s t ed bel ow:

a. Fl oor ; [ mi l l f i ni sh st eel di amond pl at e] [ pai nt ed st eel di amond pl at e] [ al umi num di amond pl at e] [ t ongue and gr oove har dwood] [ _____] .

b. Wal l s; [ pr ef i ni shed st eel panel s] [ st ai nl ess st eel ] [ _____] .

Wal l t r i m; [ pr ef i ni shed st eel ] [ st ai nl ess st eel ] [ _____] .

Accessor i es; [ handr ai l ] [ _____]

SECTI ON 14 24 13 Page 13

NOTE: Ret ai n br acket ed phr ase f or f r ei ght el evat or s t hat do not have Fr ont and Rear openi ngs.

Accessor i es; Pr ovi de i n- car hor i zont al buck- boar d wal l pr ot ect i on on f ul l l engt h of s i de wal l s [ and back wal l ] of el evat or cab.

c. Car door s, car door r et ur ns, and wal l r eveal s; [ pr ef i ni shed st eel panel s] [ st ai nl ess st eel ] [ _____] .

d. Cei l i ng; [ pr ef i ni shed st eel panel s] [ st ai nl ess st eel ] [ anodi zed aluminum][_____].

e. Hoi st way Ent r ance Assembl y Mat er i al and Fi ni shes; [ pr ef i ni shed st eel ] [ st ai nl ess st eel ] [ _____] . ]

2. 2 ELEVATOR OPERATI ON

ASME A17. 1/ CSA B44, I nt r oduct i on, Sect i on 3, Def i ni t i ons.

NOTE: Choose one of t he f ol l owi ng f our t ypes of el evat or oper at i on.

[ 2. 2. 1 Si ngl e, Two- St op, Aut omat i c Oper at i on

NOTE: Choose f or s i ngl e el evat or ser vi ng t wo landings.

Pr ovi de Si ngl e Two- St op Aut omat i c Oper at i on.

][ 2. 2. 2 Sel ect i ve Col l ect i ve Aut omat i c Oper at i on

NOTE: Choose f or s i ngl e el evat or ser vi ng t hr ee or mor e l andi ngs.

Pr ovi de Sel ect i ve Col l ect i ve Aut omat i c Oper at i on.

][ 2. 2. 3 Dupl ex Sel ect i ve Col l ect i ve Aut omat i c Oper at i on

NOTE: Choose f or t wo adj acent el evat or s.

Pr ovi de Dupl ex Sel ect i ve Col l ect i ve Aut omat i c Oper at i on. I f a car i s t aken out of ser vi ce or f ai l s t o r espond t o a l andi ng cal l wi t hi n a pr edet er mi ned adj ust abl e t i me l i mi t of appr oxi mat el y 40 t o 180 seconds, t r ansf er cal l s t o t he ot her car f unct i oni ng as a s i ngl e car Sel ect i ve Col l ect i ve el evat or unt i l t he out - of - ser vi ce car i s r et ur ned t o t he syst em.

][ 2. 2. 4 Gr oup Aut omat i c Oper at i on

NOTE: Choose f or t hr ee or mor e el evat or s t hat ser ve

SECTI ON 14 24 13 Page 14 t he same el evat or l obby.

Pr ovi de Gr oup Aut omat i c Oper at i on. I f a car i s t aken out of ser vi ce, or f ai l s t o r espond t o a l andi ng cal l wi t hi n a pr edet er mi ned adj ust abl e t i me l i mi t of appr oxi mat el y 40 t o 180 seconds, t r ansf er cal l s t o anot her car unt i l out - of - ser vi ce car i s r et ur ned t o t he syst em.

] 2. 3 SPECI AL OPERATI ON AND CONTROL

Pr ovi de t he f ol l owi ng speci al oper at i ons and cont r ol syst ems.

2. 3. 1 Keys f or El evat or Key Swi t ches

Pr ovi de a mi ni mum of t wel ve keys per uni que cyl i nder used on al l key swi t ches f or a s i ngl e el evat or . I f t her e i s mor e t han one el evat or , addi t i onal keys wi l l not be r equi r ed unl ess t her e ar e addi t i onal uni que l ock cyl i nder s. Pr ovi de keys wi t h br ass or f i ber gl ass t ags mar ked " PROPERTY OF THE U. S. GOVERNMENT" on one si de wi t h f unct i on of key or appr oved code number on t he ot her s i de.

2. 3. 2 Fi r ef i ght er s ' Emer gency Oper at i on ( FEO)

NOTE: Coor di nat e FEO Desi gnat ed Landi ng wi t h Fi r e Pr ot ect i on Desi gner .

Pr ovi de FEO equi pment and si gnal i ng devi ces. The desi gnat ed l evel f or t he FEO Phase I key oper at ed swi t ch i s t he [ gr ound] [ _____] f l oor . I n t he FEO Phase I f i x t ur e, pr ovi de FEO Oper at i ng I nst r uct i ons.

2. 3. 2. 1 Fi r ef i ght er s ' Emer gency Oper at i on ( FEO) Key Box

Pr ovi de f l ush mount ed, l ocki ng, FEO Key Box of a mi ni mum si ze of 127 mm W by 229 mm H by 38 mm D 5 i nch W by 9 i nch H by 1. 5 i nch D. I nst al l at a hei ght of 183 cm 6 f eet above f l oor l evel and di r ect l y above t he FEO Phase I key swi t ch. Pr ovi de box equi pped wi t h l ock t hat uses t he FEO K1 key.

2. 3. 3 Hoi st way Access Oper at i on

Pr ovi de hoi st way access oper at i on wi t h swi t ches at t op and bot t om t er mi nal l andi ngs. Locat e swi t ch 183 cm 6 f eet above f l oor l evel , wi t hi n 305 mm 12 i nches of el evat or hoi st way ent r ance f r ame or wi t h t he f er r ul e exposed when l ocat ed i n t he el evat or ent r ance f r ame.

2. 3. 4 I n- Car I nspect i on Oper at i on

Pr ovi de I n- Car I nspect i on Oper at i on.

2. 3. 5 I ndependent Ser v i ce

Pr ovi de exposed key- oper at ed swi t ch i n car oper at i ng panel t o enabl e i ndependent ser v i ce and si mul t aneousl y di sabl e i n- car s i gnal s and l andi ng- cal l r esponses. Pr ovi de i ndi cat or l i ght s t hat aut omat i cal l y i l l umi nat e dur i ng i ndependent ser vi ce. For dupl ex or gr oup oper at i on, i f one car i s r emoved f r om gr oup anot her car wi l l r espond t o i t s hal l cal l s .

SECTI ON 14 24 13 Page 15

2. 3. 6 Sel ect i ve Door Oper at i on

For el evat or wi t h one or mor e r ear openi ngs at same l evel as f r ont openi ng, pr ovi de f ul l - sel ect i ve oper at i on wi t h car and door oper at i ng but t ons c l ear l y mar ked f or f r ont and r ear openi ngs, f r ont and r ear car but t on f or each such f l oor , and f r ont and r ear " DOOR OPEN" and " DOOR CLOSE" but t ons.

Onl y door f or whi ch t he but t on was oper at ed opens or c l oses.

[ 2. 3. 7 El evat or Emer gency Power Oper at i on

NOTE: El ect r i cal desi gn shal l i dent i f y t he el evat or s t o be connect ed t o t he bui l di ng emer gency power syst em. I dent i f y and def i ne t he compl et e emer gency power syst em f or al l el evat or s. When usi ng t he 2nd br acket ed opt i on i n ei t her of t he next t wo subpar agr aphs, edi t as r equi r ed f or pr oj ect - speci f i c r equi r ement s.

For any el evat or t hat i s not i ncl uded i n t he bui l di ng emer gency power oper at i on, ut i l i ze par agr aph ELEVATOR AUXI LI ARY POWER OPERATI NG SYSTEM.

Pr ovi de el evat or emer gency power oper at i on f or [ al l el evat or s] [ el evat or 1, 2, 3. . . ] . Coor di nat e power suppl y and cont r ol wi r i ng t o accompl i sh i ni t i at i on and oper at i on of el evat or s on emer gency power .

][ 2. 3. 8 El evat or Auxi l i ar y Power Oper at i ng Syst em

Pr ovi de el evat or emer gency auxi l i ar y power oper at i ng syst em f or [ al l el evat or s] [ el evat or 1, 2, 3. . . ] .

] 2. 4 ELEVATOR DRI VE SYSTEM

Pr ovi de hydr aul i c el evat or dr i ve syst em, i ncl udi ng pump uni t , pi pi ng, cyl i nder / pl unger assembl y, and associ at ed equi pment , whi ch wi l l oper at e at a maxi mum wor ki ng pr essur e of 3447 kPag 500 psi or l ess. Pr ovi de compl et e el evat or syst em t hat meet s or exceeds t he NEII-1 Ri de Qual i t y St andar d, i ncl udi ng el evat or r i de qual i t y and noi se l evel s i n car and i n el evat or machi ne r oom and machi ner y space.

2. 4. 1 Hydr aul i c Pump Uni t

Pr ovi de sel f - cont ai ned pump uni t , i ncl udi ng oi l - hydr aul i c el evat or pump, el ect r i c mot or , suct i on- l i ne oi l s t r ai ner , and st r uct ur al st eel out er base wi t h t ank suppor t s and i sol at i on pads. Pr ovi de oi l t ank capaci t y f or f ul l pl unger di spl acement pl us at l east 38 l i t er s 10 gal l ons. Pr ovi de means t o mai nt ai n oi l t emper at ur e bet ween 38 and 54 degr ees C 100 and 130 degr ees F r egar dl ess of ambi ent t emper at ur e. Li mi t acoust i c out put i n el evat or machi ne r oom and machi ner y space t o 80 dbA.

2. 4. 1. 1 Pump Mot or

Pr ovi de i nt er mi t t ent - dut y pump mot or r at ed at 120 st ar t s/ hour . Pr ovi de mot or t hat i s s i zed so t hat t he mot or amper age does not exceed t he mot or dat a t ag amper age i n any oper at i ng condi t i on, excl usi ve of accel er at i on and decel er at i on. Pr ovi de mi ni mum of one mega ohm i nsul at i on r esi st ance bet ween conduct or s and mot or f r ame. Pr ovi de mot or and pump namepl at e and

SECTI ON 14 24 13 Page 16 dat a t ags per manent l y mount ed on t he out s i de of t he pump uni t f r ame, wi t h al l dat a v i ewabl e wi t hout t he use of mi r r or s or ot her t ool s.

2. 4. 2 Hydr aul i c Cont r ol s and Equi pment

Pr ovi de cont r ol val ve, over speed saf et y val ve, bl owout - pr oof muf f l er , and hydr aul i c pump di schar ge st r ai ner i n t he hydr aul i c oi l suppl y l i ne.

Pr ovi de t wo 1/ 4 t ur n, bal l val ve t ype manual shut of f val ves. Pr ovi de one i n t he el evat or hoi st way pi t and one i n t he el evat or machi ne r oom or machi ner y space.

2. 4. 2. 1 Hydr aul i c Cont r ol Val ve

Pr ovi de const ant - vel oci t y, down- speed r egul at ed, cont r ol val ve. Down- speed r egul at ed cont r ol val ve al l ows t he car t o t r avel at t he same speed i n t he down di r ect i on, r egar dl ess of t he l oad on t he el evat or . I n addi t i on, t he hydr aul i c cont r ol val ve must have bui l t - i n adj ust ment capabi l i t y t o oper at e t he el evat or at 140 per cent of r at ed speed t o f aci l i t at e per i odi c t est i ng of t he over speed saf et y val ve.

2. 4. 2. 2 Hydr aul i c Over speed Saf et y Val ve

Pr ovi de over speed saf et y val ve i n hydr aul i c oi l suppl y l i ne, di r ect l y adj acent t o t he hydr aul i c cyl i nder . Pr ovi de t hr eaded pi pe connect i ons bet ween t he hydr aul i c cyl i nder and t he over speed val ve. Pr ovi de val ve equi pped wi t h manuf act ur er ' s manual shut of f f eat ur e. Over speed val ve must not be equi pped wi t h a manual or aut omat i c l ower i ng f eat ur e. Pr ovi de adj ust abl e val ve wi t h means t o seal adj ust ment af t er i nspect i on and t est i ng by cer t i f i ed el evat or i nspect or .

2. 4. 3 Hydr aul i c Pi pi ng and Accessor i es

NOTE: Ret ai n br acket ed sent ence f or i n- gr ound di r ect pl unger t ype el evat or s.

Provide ASTM A53/ A53M or ASTM A106/ A106M, Schedul e 80, bl ack st eel pi pi ng with ASME B16. 9 or ASME B16. 11 f i t t i ngs f or suppl y pi pi ng. Ext end schedul e 80 pi pi ng f r om t he pump cont r ol val ve body, i nsi de t he pump uni t , t o t he hydr aul i c cyl i nder i n t he hoi st way. Pr ovi de wel ded or t hr eaded f or ged pi pe f i t t i ngs f or al l f i t t i ngs and component s of t he hydr aul i c oi l suppl y l i ne.

[ For i n- gr ound di r ect pl unger cyl i nder s, pr ovi de di el ect r i c uni on or i sol at i on coupl i ngs at each end of t he hydr aul i c oi l suppl y l i ne. ] Pr ovi de hanger s or suppor t s f or al l pi pi ng and component s.

2. 4. 3. 1 Cont ai nment of Hydr aul i c Oi l Suppl y Li ne

Pr ot ect al l por t i ons of hydr aul i c oi l suppl y l i ne t hat ar e i nst al l ed bel ow gr ound, i ncl udi ng por t i ons encapsul at ed i n concr et e or cover ed by const r uct i on, wi t h cont i nuous, Schedul e 80, PVC. I nsi de di amet er of PVC must be 76 mm 3 i nches l ar ger t han t he out s i de di amet er of t he hydr aul i c oi l suppl y l i ne pi pe and coupl i ngs.

2. 4. 4 Hydr aul i c El evat or Type

NOTE: Use of a hol el ess t ype el evat or wi t h a non- t el escopi ng j ack wi l l be l i mi t ed t o a maxi mum

SECTI ON 14 24 13 Page 17 t r avel di st ance of 12 f t - 8 i n.

Pr ovi de a [ i n- gr ound di r ect pl unger ] [ hol el ess] di r ect pl unger t ype hydr aul i c el evat or . El evat or wi t h t el escopi c or i nver t ed cyl i nder - pl unger s ar e not accept abl e and may not be used. Rope hydr aul i c el evat or desi gn i s not accept abl e and may not be used.

2. 4. 4. 1 Cyl i nder - Pl unger ( Jack) Uni t

Pr ovi de a s i ngl e- st age pl unger of seaml ess st eel const r uct i on. Pr ovi de cyl i nder wi t h sel f - st abi l i z i ng mount t hat wi l l suppor t and hol d cyl i nder pl umb wi t hout t he need f or st abi l i zat i on means at t he bot t om of t he cyl i nder . Pr ovi de a t hr eaded, 6 mm 1/ 4 i nch bl eeder val ve at t he t op of t he cyl i nder , j ust bel ow packi ng gl and.

[ 2. 4. 5 Cyl i nder Wel l Syst em

NOTE: Ret ai n t hi s par agr aph and associ at ed subpar agr aphs f or i n- gr ound di r ect pl unger t ype el evat or s onl y.

For di r ect pl unger , i n- gr ound t ype hydr aul i c el evat or , pr ovi de a dr y, seal ed cyl i nder wel l syst em.

2. 4. 5. 1 Wel l Casi ng

Locat e and dr i l l wel l f or t he cyl i nder wel l syst em. Li ne wel l wi t h st eel casi ng, mi ni mum 6 mm 1/ 4 i nch wal l wi t h wel ded 13 mm 1/ 2 i nch st eel bot t om. Set casi ng pl umb.

2. 4. 5. 2 PVC or HDPE Li ner

Pr ovi de Schedul e 80 PVC or HDPE l i ner wi t h bot t om cap and coupl i ngs; j oi nt s seal ed wat er t i ght usi ng pi pe manuf act ur er ' s r ecommended adhesi ve or heat wel di ng met hods. Pr ovi de l i ner i nsi de di amet er not l ess t han 76 mm 3 i nches l ar ger t han el evat or cyl i nder maxi mum out si de di amet er . Li ner may be pr ovi ded as a cy l i nder manuf act ur e' s appl i ed l i ner or as a separ at e component . For separ at e l i ner , set l i ner pl umb i n wel l casi ng, l ocat ed f or cyl i nder i nst al l at i on. Pr ovi de dr y, sal t - f r ee sand bel ow and ar ound l i ner t o t op of wel l casi ng.

2. 4. 5. 3 Cyl i nder I nst al l at i on

Remove al l moi st ur e f r om i nsi de of l i ner . I nst al l cy l i nder pl umb, i nsi de l i ner . Pr ovi de a 6 mm 1/ 4 i nch copper evacuat i on t ube i nsi de t he l i ner .

The bot t om of t he evacuat i on t ube must be wi t hi n 152 mm 6 i nch of t he bot t om of t he l i ner . Top of evacuat i on t ube must ext end at l east 152 mm 6 i nch above pi t f l oor . Pr ovi de t op of t est t ube wi t h r emovabl e cap t o excl ude f or ei gn mat t er . Pr ovi de ai r i nl et pr essur e f i t t i ng i n t op of l i ner and accessi bl e i n pi t , f or per f or mance of ai r pr essur e t est . Secur e Li ner / Cyl i nder Assembl y as r ecommended by cyl i nder manuf act ur er .

2. 4. 5. 4 Cyl i nder Li ner Moi st ur e Sensor Syst em

Pr ovi de moi st ur e and oi l sensor s i nsi de t he cyl i nder l i ner f or det ect i on of oi l and wat er at t he bot t om of t he cyl i nder l i ner . Pr ovi de sensor

SECTI ON 14 24 13 Page 18 moni t or i ng syst em t hat wi l l act uat e audi bl e and vi sual al ar ms and i dent i f y t he pr esence of wat er and i dent i f y t he pr esence of oi l i nsi de t he l i ner .

2. 4. 5. 5 Seal Top of Wel l Casi ng

Upon successf ul t est and cer t i f i cat i on of Li ner / Cyl i nder assembl y, seal gap bet ween st eel wel l casi ng and l i ner wi t h f oam i nser t st r ong enough t o r et ai n and suppor t f i nal gr out i ng. Pr ovi de 21 MPa 3000 psi gr out t o a mi ni mum of 102 mm 4 i nch t hi ckness and l evel t op of f i nal gr out i ng wi t h pi t floor.

] 2. 5 CONTROL EQUI PMENT

Encl ose al l el evat or cont r ol equi pment i n f act or y- pr i med and baked- enamel coat ed sheet - met al cabi net s wi t h vent i l at i on l ouver s and r emovabl e or hi nged door s. Mount cabi net s at a hei ght of 254 mm 10 i nches above machi ne r oom or cont r ol r oom f i ni sh f l oor .

2. 5. 1 Mot or Cont r ol Equi pment

Pr ovi de el evat or mot or cont r ol wi t h el ect r oni c, sof t - st ar t mot or st ar t er .

2. 5. 2 El evat or Mi cr opr ocessor Cont r ol l er

For each i ndi v i dual el evat or cont r ol l er , and f or each gr oup cont r ol l er , pr ovi de a mi cr opr ocessor cont r ol l er t hat compl i es wi t h t he f ol l owi ng par agr aphs. Pr ovi de cont r ol l er ( s) package t hat i ncl udes al l har dwar e and sof t war e r equi r ed f or t he i nst al l at i on, mai nt enance, and ser vi ce of t he el evat or , i n i t s ' ent i r et y. Pr ovi de ver i f i cat i on of t echni cal suppor t ser vi ce t hat t he cont r ol l er manuf act ur er pr ovi des t o any l i censed el evat or i nst al l at i on, ser vi ce, and mai nt enance company.

Pr ovi de an el evat or cont r ol l er f r om a manuf act ur er t hat pr ovi des compr ehensi ve f act or y t r ai ni ng t o i ncl ude cont r ol l er i nst al l at i on, adj ust ment , ser v i ce, and mai nt enance. The t r ai ni ng must be i dent i f i ed as avai l abl e t o any l i censed el evat or cont r act or . Pr ovi de ver i f i cat i on of an est abl i shed and document ed t r ai ni ng schedul e, wi t h pr i c i ng, f or f act or y t r ai ni ng c l asses t hat manuf act ur er has pr ovi ded f or a mi ni mum per i od of one year pr i or t o cont r act awar d dat e.

The el evat or cont r ol l er must be i dent i f i ed as avai l abl e f or pur chase and i nst al l at i on by any l i censed el evat or cont r act or . Al l component s, par t s, di agnost i c t ool s, and sof t war e must be avai l abl e f or pur chase and i nst al l at i on and use by any l i censed el evat or cont r act or ; " exchange- onl y" pr ovi s i ons f or t he pur chase of spar e par t s ar e not accept abl e. The el evat or cont r ol l er manuf act ur er must publ i sh an i ndust r y compet i t i ve pr i ce l i s t i ng f or al l cont r ol l er par t s, di agnost i c t ool s, and sof t war e.

Pr ovi de ver i f i cat i on of t el ephone and i nt er net based t echni cal suppor t ser vi ce t hat t he el evat or cont r ol l er manuf act ur er pr ovi des t o any l i censed el evat or i nst al l at i on, ser vi ce, and mai nt enance company at an i ndust r y compet i t i ve pr i ce. The ser vi ce must i ncl ude l i ve t el ephone based t echni cal suppor t f or i nst al l at i on, adj ust ment , mai nt enance, and t r oubl eshoot i ng of t he el evat or cont r ol l er and r el at ed el evat or component s. The ser vi ce must be avai l abl e dur i ng st andar d wor ki ng hour s.

Pr ovi de an el evat or cont r ol l er t hat i s desi gned t o aut omat i cal l y r eest abl i sh nor mal el evat or oper at i on f ol l owi ng any t empor ar y l oss of power , r egar dl ess of dur at i on.

SECTI ON 14 24 13 Page 19

2. 5. 2. 1 El evat or Cont r ol l er I nt er f ace Cabi net

For each i ndi v i dual el evat or mi cr opr ocessor cont r ol l er , pr ovi de a separ at e el evat or cont r ol cabi net wi t h an i nt egr at ed human i nt er f ace syst em. For gr oup el evat or i nst al l at i ons, a s i ngl e cabi net and i nt er f ace syst em wi t h f ul l access t o each el evat or cont r ol l er may be ut i l i zed. The separ at e cont r ol l er i nt er f ace cabi net must be suppl i ed by t he el evat or cont r ol l er manuf act ur er and i ncl ude a mi ni mum 305 mm 12 i nch wi de keyboar d and a mi ni mum 254 mm 10 i nch moni t or . The el evat or cont r ol l er i nt er f ace cabi net must compl y wi t h ar c- f l ash pr ot ect i on r equi r ement s of NFPA 70E and

UFC 3- 560- 01.

2. 5. 2. 1. 1 El evat or Mi cr opr ocessor Human I nt er f ace

The i nt er f ace syst em must pr ovi de compl et e el evat or cont r ol l er i nt er f ace capabi l i t y and must i ncl ude t he el evat or cont r ol l er manuf act ur er ' s compr ehensi ve package of i nst al l at i on and di agnost i c sof t war e. The mi cr opr ocessor i nt er f ace syst em must pr ovi de unr est r i c t ed access t o al l par amet er s, al l l evel s of adj ust ment , and al l f l ags necessar y f or i nst al l at i on, adj ust ment , mai nt enance, and t r oubl eshoot i ng of each el evat or and f or t he el evat or gr oup. Al l sof t war e pr ogr ammi ng must be st or ed i n non- vol at i l e memor y. The el evat or cont r ol l er f aul t l og must pr ovi de non- vol at i l e memor y f aul t l og st or age of al l f aul t s, t r oubl e cal l s , and f aul t hi st or y f or a mi ni mum of one year and t he abi l i t y t o downl oad or pr i nt t he f aul t l og. The cont r ol l er i nt er f ace must al so pr ovi de t he capabi l i t y t o di spl ay and di agnose t r oubl e cal l s , f aul t s, and shut downs.

Expi r i ng sof t war e, degr adi ng oper at i on, and " key" access cont r ol s ar e not acceptable.

2. 5. 2. 2 Sof t war e and Document…