F-3. Fence and Flight line pole-rts.pdf

Catalog Number

Notes

Type

OUTDOOR POLE-RTS

FEATURES & SPECIFICATIONS

INTENDED USE — These specifications are for USA standards only. RTS poles are not to be utilized for Sportslighting applications requiring use of crossarms to mount luminaires. SPRTS series poles are the correct pole type for Sportslighting projects and are designed to be configured as a complete assembly with the desired crossarm(s) incorporated within the pole nomenclature description.

CONSTRUCTION —

Pole Shaft: The pole shaft is of 11-gauge (0.120"), 7-gauge (0.179") or, 3-gauge (0.239") with a uniform wall thickness and is made of a weldable-grade (ASTM A-595 Grade A or A572 Grade 55), hot-rolled, commercial-quality carbon steel tubing with a minimum yield of 55,000 psi. Shaft is one-piece construction with a full-length longitudinal high-frequency electric resistance weld and round in cross-section having a uniform linear taper of 0.14" per foot.

Pole Top: Options include tenon top, drilled for side mount fixture, tenon with drilling (includes extra handhole) and open top. Side drilled and open top poles include a removable steel top cap with set screws.

Handhole: A reinforced handhole with grounding provision is provided at 18" from the base end of the pole assembly on side A. Every handhole includes a cover and cover attachment hardware. 3" x 5" rectangular handhole is provided on pole with 5.9" diameter. Pole shaft with diameters greater than 5.9" are provided with a 4" x 6.5" oval shaped handhole.

Base Cover: A two-piece ABS plastic full base cover is provided with each pole assembly on pole shaft diameters of 9" or less. Shaft sized greater than 9" have a sheet steel two-piece base cover. Additional base cover options are available upon factory request. Bolt cover caps can be substituted on most pole shaft sizes.

Options include heavy duty two-piece cast aluminum full base cover and bolt cover caps. All base covers and bolt cover caps are finished to match pole.

Anchor Base/Bolts: Anchor base is fabricated from hot-rolled carbon steel plate that conforms with ASTM A36. Anchor bolts are manufactured to ASTM F1554 Standards Grade 55, (55 KSI minimum yield strength and tensile strength of 75-95 KSI). Upper portion of anchor bolt is galvanized per ASTM A-153; bolts have an “L” bend on bottom end and are galvanized a minimum of 12" on the threaded end. Each hot-dipped galvanized anchor bolt is furnished with two hex nuts and two flat washers.

HARDWARE — All structural fasteners are high-strength galvanized carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel, or stainless steel.

FINISH — Extra durable painted finish is coated with TGIC (Triglycidyl Isocyanurate) Polyester powder that meets 5A and 5B classifications of ASTM D3359. Powder-coat finishes include Dark Bronze, White, Black, and Natural Aluminum colors. Architectural Colors and Special Finishes are available by quote and include, but are not limited to Paint over Hot-dipped Galvanized, RAL Colors, Custom Colors and Extended Warranty Finishes.

BUY AMERICAN ACT — Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations.

Please refer to www.acuitybrands.com/buy-american for additional information.

INSTALLATION — Do not erect poles without having fixtures installed. Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. Lithonia Lighting is not responsible for the foundation design.

WARRANTY — 1-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed.

Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions

NOTE: Actual performance may differ as a result of end-user environment and application.

Specifications subject to change without notice.

Anchor Base Poles

RTS

ROUND TAPERED STEEL

https://www.acuitybrands.com/resources/buy-american http://www.acuitybrands.com/support/warranty/terms-and-conditions https://www.acuitybrands.com/resources/buy-american

POLE-RTS

OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com © 2010-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/20/23

RTS Round Tapered Steel Poles

RTS

Series Nominal fixture mounting height

Nominal shaft base size/wall thickness1 Mounting2 Options Finish11

RTS 20'-50'

(for 1/2 ft increments, add -6 to the pole height.

Ex: 20-6 equals 20ft 6in.)

(See technical information table for complete ordering information.)

5-9B (.120") 6-5B (.120") 6-6B (.120") 7-0B (.120") 7-0F (.179") 7-3B (.120") 7-8B (.120") 8-0B (.120") 8-0F (.179") 8-5B (.120") 9-0B (.120") 9-0F (.179") 9-5B (.120") 10-0B (.120") 10-0F (.179") 11-0F (.179") 13-0F (.179") 13-0M (.239")

(See technical information table for complete ordering information.)

Tenon mounting PT Open top

T20 2-3/8" O.D. (2" NPS)2

T25 2-7/8" O.D. (2-1/2" NPS)2

T30 3-1/2" O.D. (3" NPS)2

T35 4" O.D. (3-1/2" NPS)2

KAC/KAD/KSE/KSF/KVR/KVF

Drill mounting3

DM19 1 at 90° DM28 2 at 180° DM28PL 2 at 180° with one side plugged DM29 2 at 90° 2

DM32 3 at 120° 2

DM39 3 at 90° 2

DM49 4 at 90° 2

CSX/DSX/RSX/AERIS™/OMERO™/

HLA/KAX Drill mounting3

DM19AS 1 at 90° DM28AS 2 at 180° DM29AS 2 at 90°2

DM32AS 3 at 120°2

DM39AS 3 at 90°2

DM49AS 4 at 90°2

ESX Drill mounting3

DM19ESX 1 at 90° DM28ESX 2 at 180° DM29ESX 2 at 90° DM39ESX 3 at 90° DM49ESX 4 at 90° AERIS™ Suspend drill mounting3,4

DM19AST_ 1 at 90° DM28AST_ 2 at 180° DM29AST_ 2 at 90° DM39AST_ 3 at 90° DM49AST_ 4 at 90° OMERO™ Suspend drill mounting3,4

DM19MRT_ 1 at 90° DM28MRT_ 2 at 180° DM29MRT_ 2 at 90° DM39MRT_ 3 at 90° DM49MRT_ 4 at 90°

Shipped installed VD Vibration damper HAxy Horizontal arm bracket

(1 fixture)5,6

FDLxy Festoon outlet less electrical5,7

CPL12/xy 1/2" coupling5

CPL34/xy 3/4" coupling5

CPL1/xy 1" coupling5

NPL12/xy 1/2" threaded nipple5

NPL34/xy 3/4" threaded nipple5

NPL1/xy 1" threaded nipple5

EHHxy Extra handhole5,8

FBCSTL2PC 2 Piece steel base cover (standard is plastic)

IC Interior coating9

L/AB Less anchor bolts (Include when anchor bolts are not needed)

TP Tamper resistant handhole cover fasteners

NEC NEC 410.30 compliant gasketed handhole (Not UL Labeled)

UL UL listed with label (Includes NEC compliant cover)

BAA Buy America(n) Act Compliant10

Super durable paint colors DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DSSXD Sandstone DGCXD Charcoal gray DTGXD Tennis green DBRXD Bright red DSBXD Steel blue DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured black aluminum DWHGXD Textured white Other finishes GALV Galvanized finish Architectural colors and special finishes

Paint over Galvanized, RAL Colors, Custom Colors and Extended Warranty Finishes available.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: RTS 30 6-6B DM19 DDBXD

NOTES:

1. Wall thickness will be signified with a "B" (11 Gauge), an "F" (7 Gauge) or, an "M" (3 Gauge) in nomenclature.

"B" - 0.120" | "F" - 0.179" | "M" - 0.239"

2. PT open top poles include top cap. When ordering tenon mounting and drill mounting for the same pole, follow this example: DM28/T20. The combination includes a required extra handhole.

3. Refer to the fixture spec sheet for the correct drilling template pattern and orientation compatibility.

4. Insert "1" or "2" to designate fixture size; e.g. DM19AST2.

5. Specify location and orientation when ordering option.

For "x": Specify the height above the base of pole in feet or feet and inches; separate feet and inches with a "-".

Example: 5ft = 5 and 20ft 3in = 20-3 For "y": Specify orientation from handhole (A,B,C,D) Refer to the Handhole Orientation diagram below.

Example: 1/2" coupling at 5' 8 ", orientation C = CPL12/5-8C

6. Horizontal arm is 18" x 2-3/8" O.D. tenon standard with radius curve providing 12' rise. If ordering two horizontal arm at the same height, specify with HAxyy. Example: HA20BD

7. FDL does not come with GFCI outlet or handhole cover. These must be supplied by contractor or electrician.

8. Combination of tenon-top and drill mount includes extra handhole. EHH includes cover.

9. Provides enhanced corrosion resistance. Not available with GALV.

10. Use when mill certifications are required.

11. Finish must be specified. Additional colors available; see Architectural Colors brochure linked here (Form No. 794.3). Lead times may be extended up to 2 weeks due to paint procurement.

Accessories: Order as separate catalog number.

PL DT20 Plugs for ESX drillings PL DT8 Plugs for DMxxAS drillings http://www.lithonia.com https://www.acuitybrands.com/resources/customer-tools/paint-colors

OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com © 2010-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/20/23

RTS Round Tapered Steel Poles

TECHNICAL INFORMATION — EPA (ft2) with 1.3 gust

Catalog Number Nominal Shaft Length (ft.)*

Pole Shaft Size (Base in. x Top in. x ft.)

Wall thick

(in) Gauge 80 MPH Max.

weight 90 MPH Max.

weight 100 MPH Max.

weight Bolt size

(in. x in. x in.)

RTS 20 5-9B 20 5.9 x 3.1 x 20 0.120 11 19.3 482 15.1 377 12.2 305 1 x 36 x 4

RTS 20 6-5B 20 6.5 x 3.7 x 20 0.120 11 24.2 605 19.3 482 15.6 390 1 x 36 x 4

RTS 25 5-9B 25 5.9 x 2.4 x 25 0.120 11 12.5 312 9.9 247 8 200 1 x 36 x 4

RTS 25 7-0B 25 7.0 x 3.5 x 25 0.120 11 20.3 507 16.2 405 13.1 327 1 x 36 x 4

RTS 25 7-0F 25 7.0 x 3.5 x 25 0.179 7 30.5 760 24 625 19.8 495 1 x 36 x 4

RTS 30 6-6B 30 6.6 x 2.4 x 30 0.120 11 11.7 292 9.3 232 7.5 187 1 x 36 x 4

RTS 30 8-0B 30 8.0 x 3.8 x 30 0.120 11 18.9 473 14.9 373 12 300 1 x 36 x 4

RTS 30 8-0F 30 8.0 x 3.8 x 30 0.179 7 33.5 838 27 675 22 550 1-1/4 x 42 x 6

RTS 35 7-3B 35 7.3 x 2.4 x 35 0.120 11 11.2 280 8.9 222 7.1 177 1 x 36 x 4

RTS 35 8-5B 35 8.5 x 3.6 x 35 0.120 11 18.9 472 15.1 377 12.2 305 1 x 36 x 4

RTS 35 9-5B 35 9.5 x 4.6 x 35 0.120 11 23.2 580 18.2 455 14.5 363 1 x 36 x 4

RTS 39 7-8B 39 7.8 x 2.4 x 39 0.120 11 10.7 267 8.5 212 6.6 165 1 x 36 x 4

RTS 39 9-0B 39 9.0 x 3.6 x 39 0.120 11 17.2 430 13.5 338 10.8 270 1 x 36 x 4

RTS 39 9-0F 39 9.0 x 3.6 x 39 0.179 7 28.5 715 23 575 19 475 1-1/4 x 42 x 6

RTS 45 10-0B 45 10.0 x 3.7 x 45 0.120 11 17.4 435 13.5 338 10.6 265 1 x 36 x 4

RTS 45 10-0F 45 10.0 x 3.7 x 45 0.179 7 28.5 715 23 575 19 475 1-1/4 x 42 x 6

RTS 50 10-0B 50 10.0 x 3.0 x 50 0.120 11 13.2 330 10.6 265 8.3 208 1 x 36 x 4

RTS 50 10-0F 50 10.0 x 3.0 x 50 0.179 7 20.5 512 16.5 412 13.6 340 1-1/4 x 42 x 6

RTS 50 11-0F 50 11.0 x 3.0 x 50 0.179 7 29.9 748 23.5 588 18.6 465 1-1/4 x 42 x 6

RTS 50 13-0F 50 13.0 x 6.0 x 50 0.179 7 50.4 1260 39.7 992 31.4 785 1-1/4 x 54 x 6

RTS 50 13-0M 50 13.0 x 6.0 x 50 0.239 3 69.2 1730 55 1375 44.2 1105 1-3/4 x 84 x 6

NOTE: EPA values are based ASCE 7-93 wind map.

*For 1/2 ft increments, add -6 to the pole height. Ex: 20-6 equals 20ft 6in.

TECHNICAL INFORMATION — EPA (ft2) WITH 3-SECOND GUST PER AASHTO 2013

Series Mounting Height (ft)*

Shaft Base Size 90 MPH Max.

weight

MPH

Max.

weight

MPH

Max.

weight

MPH

Max.

weight

MPH

Max.

weight

MPH

Max.

weight

MPH

Max.

weight Approx. ship weight (lbs.)

RTS 20 5-9B 18 400 14.5 363 12 300 10 250 8.5 213 7 175 6 150 140

RTS 20 6-5B 22 550 18 450 15 375 13 325 11 275 9.5 238 8 200 160

RTS 25 5-9B 13 200 10.5 200 8.5 200 7 175 5.5 138 4.5 113 4 100 155

RTS 25 7-0B 19 475 16 400 13 325 11 275 9 225 8 200 7 175 200

RTS 25 7-0F 21 525 17 425 14 350 11.5 288 9.5 238 8.5 213 7 175 280

RTS 30 6-6B 12.5 200 10 200 7.5 188 6.5 163 5.5 138 4.5 113 3.5 88 200

RTS 30 8-0B 17.5 438 14 350 11.5 288 9.5 238 8 200 6.5 163 5.5 138 265

RTS 30 8-0F 30 750 24.5 613 20.5 513 17.5 438 15 375 12.5 313 11 275 380

RTS 35 7-3B 12 188 9.5 188 7.5 188 6 150 5 125 4 100 3.5 88 250

RTS 35 8-5B 14 350 11 275 9 225 7 175 6 150 5 125 4 100 315

RTS 35 9-5B 16.5 413 13.5 338 11 275 9 225 7.5 188 6 150 5 125 370

RTS 39 7-8B 11.5 188 9 188 6.5 163 5 125 4 100 3 75 2.5 63 285

RTS 39 9-0B 13 325 10 250 8 200 6.5 163 5 125 4 100 3.5 88 355

RTS 39 9-0F 24 600 19.5 488 16 400 13 325 11 275 9.5 238 8 200 515

RTS 45 10-0B 10 250 7.5 188 6 150 4.5 113 3.5 88 2.5 63 2 50 450

RTS 45 10-0F 20.5 513 16 400 13 325 10.5 263 9 225 7.5 188 6 150 650

RTS 50 10-0B 7.5 188 5.5 138 4 100 2.5 63 1.5 38 1 25 0.5 13 475

RTS 50 10-0F 17.5 413 13 325 10.5 263 8 200 6.5 163 5 125 4 100 680

RTS 50 11-0F 19 475 15 375 12 300 10 250 8 200 6.5 163 5 125 812

NOTE: AASHTO 2013 criteria is the most conservative existing EPA calculation. For poles not showing EPA values under AASHTO 2013, EPA values may exist under commercial criteria (see table above).

*For 1/2 ft increments, add -6 to the pole height. Ex: 20-6 equals 20ft 6in.

http://www.lithonia.com

OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 800-705-SERV (7378) www.lithonia.com © 2010-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/20/23

RTS Round Tapered Steel Poles

BASE DETAIL

18"

B

C

A

IMPORTANT INSTALLATION NOTES:

• Do not erect poles without having fixtures installed.

• Factory-supplied templates must be used when setting anchor bolts. Lithonia will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates.

• If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.

• Bolt circles have +/- 1/2" tolerance.

• For poles larger than 10" consult factory.

• Lithonia Lighting is not responsible for the foundation design.

HANDHOLE ORIENTATION

A Handhole

B

C

D Default DM19 is on side B.

CAUTION: These specifications are intended for general purposes only. Lithonia Lighting reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products.

POLE DATA

Shaft base size Bolt circle A

Bolt projection B

Base square C

Template description

Anchor bolt description

5.9" 9" 4.13" 10" ABTEMPLATE PJ50075 AB36-0

6.5" 9.5" 4.13" 10.5" ABTEMPLATE PJ50074 AB36-0

6.6" 9.5" 4.13" 10.5" ABTEMPLATE PJ50078 AB36-0

7" B 10" 4.13" 10.88" ABTEMPLATE PJ50077 AB36-0

7" F 10" 4.25" 10.88" ABTEMPLATE PJ50076 AB36-0

7.3" 10.5" 4.13" 11.25" ABTEMPLATE PJ50081 AB36-0

7.8" 11" 4.13" 11.5" ABTEMPLATE PJ50084 AB36-0

8" B 11" 4.13" 11.5" ABTEMPLATE PJ50079 AB36-0

8" F 11" 4.25" 11.5" ABTEMPLATE PJ50080 AB42-0

8.5" 11.5" 4.25" 12" ABTEMPLATE PJ50082 AB36-0

9" B 12.5" 4.25" 12.38" ABTEMPLATE PJ50085 AB36-0

9" F 12.5" 5" 12.38" ABTEMPLATE PJ50086 AB42-0

9.5" 13" 4.25" 13" ABTEMPLATE PJ50083 AB36-0

10" B 13.5" 4.25" 14" ABTEMPLATE PJ50087 AB36-0

10" F 13.5" 5" 14" ABTEMPLATE PJ50088 AB42-0

11" 15" 5.25" 16.5" ABTEMPLATE PJ50089 AB42-0

13" F 17" 5.75" 18" ABTEMPLATE MANUFACTURER

SUPPLIED AB54-0

13" M 17.5" 6.5" 18.5" ABTEMPLATE MANUFACTURER

SUPPLIED AB84-0

http://www.lithonia.com