Existing Door Alarm Switch Submittal.pdf

Life More Secure.

www.thedoorswitch.com

11772 Westline Industrial Dr.

St. Louis, MO 63146 local (314) 298-3433 toll free (877) 998-5625 fax (314) 373-7227

Behavioral Healthcare Door Safety

The Door SwitchTM is an over-the-door alarm for your behavioral healthcare facility doors.

PRODUCT BOOK

The Door SwitchTM is a patented design. Patent No. RE42,991 and RE44,039 For more information, please visit www.thedoorswitch.com or call toll free at (877) 998-5625

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 1

Table of Contents

TABLE OF CONTENTS

TERMS & CONDITION OF SALE/WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

PRODUCT LIST

DOOR SWITCH SYSTEM OVERVIEW

COMPONENT FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1 6

CRITERIA SHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 7 - 1 9

INSTALLATION LIABILITY RELEASE FORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 0

TYPICAL DOOR SWITCH LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1

MEASURING DOORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 - 2 3

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,0392

Terms & Conditions of Sale/Warranty

ACKNOWLEDGEMENT OF ORDER AND TERMS AND CONDITIONS OF SALE

This is to acknowledge receipt of your (“Buyer”) purchase order for the speci�ed THE DOOR SWITCH ™ (“Seller”) products (the “Products”) and to set forth the terms and conditions (“Terms and Conditions”) of sale for this order. If the Terms and Conditions of this acknowledgment di�er in any way from the terms and conditions of Buyer’s order, this acknowledgment shall be construed as a countero�er and shall not be e�ective as an acceptance of such order unless Buyer assents to the Terms and Conditions contained herein, which shall constitute the entire agreement (the “Agreement”) between the parties. Buyer’s assent to the Terms and Conditions contained herein shall be deemed given upon Buyer’s execution of this acknowledgment below or upon Buyer’s failure to object to these Terms and Conditions in writing within ten (10) days from the date of receipt of this acknowledgment. Buyer’s receipt of delivery of the Products without immediate return will further manifest Buyer’s assent to these Terms and Conditions. No additions to or modi�cations of any of the Terms and Conditions hereof shall be e�ective unless made in writing and signed by both parties.

1. TAXES: Any tax or governmental charge (or increase in same) a�ecting Seller’s costs of production, sale, or delivery shall be for Buyer’s account and shall be added to the price and shall not be subject to any discount.

2. MINIMUM ORDER CHARGE: The minimum invoice amount will be $50.00. An order with a net value of less than $50.00 will be invoiced at $50.00.

3. TERMS OF PAYMENT: Terms are 15 days from the date of Seller’s invoice in U.S. currency. Seller shall have the right, among other remedies, either to terminate this Agreement or to suspend further performance under this and/or other agreements with Buyer in the event Buyer fails to make any payment when due. Buyer shall be liable for all costs and expenses, including reasonable attorney’s fees, relating to the collection of past due amounts. If any payment owed to Seller is not paid when due, it shall bear interest at the maximum rate allowed by law from the date on which it is due until it is paid. Should Buyer’s financial situation and/or capabilities become unsatisfactory to Seller in its sole discretion, cash payments or security satisfactory to Seller may be required by Seller for future deliveries and for the Products theretofore delivered.

4. BACK CHARGES: Seller is not responsible for, and will not accept, any charges for labor or material costs incurred for any installation, repair, service or replacement of the Products without the prior written consent of Seller.

5. SHIPMENT AND DELIVERY: Deliveries are made F.O.B. Seller’s shipping point. Responsibility and risk of loss for damage shall pass from Seller to Buyer upon render to, and receipt by, a common carrier at Seller’s shipping point. Buyer hereby expressly waives any claims for shortages or damages su�ered in transit against Seller and hereby agree that any such claims shall be submitted by Buyer directly and only to the Buyer’s insurance carrier. While Seller will use commercially reasonable e�orts to maintain the delivery date(s) acknowledged or quoted by Seller, all shipping dates are approximate and not guaranteed. Seller reserves the right to make partial shipments. Seller, at its sole option, shall not be bound to tender delivery of any Products for which Buyer has not provided shipping instructions. If the shipment of the Products is postponed or delayed by Buyer for any reason, Buyer agrees to reimburse Seller for any and all storage costs and other additional expenses resulting there from.

6. RETURN OF GOODS: Products cannot be returned without the prior written consent of Seller. A 25% restocking and handling charge will be applied to returned Products, other than those which are returned for warranty repair or replacement. Additional service charges will apply to any damaged Products for restoration to saleable condition.

7. LIMITED WARRANTY; LIMITATION OF REMEDY AND LIABILITY: Subject to the limitations on remedies and liabilities set forth below, Seller warrants that the Products manufactured by Seller will be free from defects in material or workmanship under normal use and regular service and maintenance for one (1) year from the date of by Seller to Buyer. Determination of the suitability or fitness of the Products from the use or purpose contemplated by Buyer is the sole responsibility of Buyer, and Seller shall have no responsibility in connection with such suitability. The warranty set forth in this paragraph is Seller’s sole warranty with respect to the Products.

SELLER MAKES NO OTHER WARRANTY OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY AGAINST INFRINGEMENT OF ANY THIRD PARTY’S INTELLECTUAL PROPERTY RIGHTS; AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS

AGREEMENT.

Buyer agrees to examine and inspect the Products immediately upon arrival at their destination, and if the Products allegedly fail to comply with the limited warranty provided hereunder, Buyer shall give detailed written notice of such alleged failure/non-compliance to Seller within ten (10) days of its receipt of the Products. Any claim under this warranty shall conclusively be deemed waived by Buyer unless written notice thereof is given to Seller within ten (10) days after Buyer discovers, or should reasonably have discovered, the alleged failure/non-compliance of the Products, whichever is earlier.

Buyer’s exclusive remedy under this warranty is limited to the repair or replacement of the Products or the refund of the amount of the purchase price paid by Buyer, at Seller’s sole option, upon the return of any nonconforming Products to Seller at Buyer’s expense.

This limited warranty does not extend to any losses or damages due to misuse, accident, abuse, neglect, normal wear and tear, Buyer’s negligence or intentional conduct, unauthorized modification or alteration, use beyond rated capacity, or improper installation, maintenance or application. To the extent that Seller has relied upon any specifications, information, representations of operatin

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 3

Terms & Conditions of Sale/Warranty conditions or other data supplied by Buyer or its agents to Seller in connection with the design or manufacture of the Products, and in the event such speci�cations, information, representations or other data caused and/or contributed to the alleged failure/non-compliance of the Products, then any warranties contained herein shall be expressly waived by Buyer and be deemed null and void.

IT IS UNDERSTOOD AND AGREED THAT SELLER’S LIABILITY HEREUNDER OR IN CONNECTION WITH THE MANUFACTURE OR SALE OF THE PRODUCTS DESCRIBED HEREIN, WHETHER IN CONTRACT, IN TORT, FOR INFRINGEMENT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE AMOUNT OF THE PURCHASE PRICE PAID BY BUYER. UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY LOSS OF ANTICIPATED PROFITS INCURRED BY BUYER). THE PRICE STATED FOR THE PRODUCTS IS A CONSIDERATION IN LIMITING SELLER’S

LIABILITY.

8. EXCUSE OF PERFORMANCE (FORCE MAJEURE): Seller shall not be liable for delays in performance or for non-performance due to acts of God; acts of Buyer; war; �re; terrorism or other criminal conduct; �ood; weather; sabotage; strikes, or labor or civil disturbances; governmental requests, restrictions, laws, regulations, orders or actions; unavailability of or delays in materials, utilities or transportation; default of suppliers; or circumstances or any other events or causes beyond Seller’s control. Deliveries or other performance may be suspended for an appropriate period of time or canceled by Seller upon notice to Buyer in the event of any of the foregoing, but the remainder of the Agreement shall otherwise remain una�ected as a result of the foregoing.

If Seller determines that its ability to supply the total demand for the Products, or to obtain material used directly or indirectly in the manufacture of the Products, is hindered, limited or made impracticable, Seller may allocate its available supply of the Products or such material (without obligation to acquire other supplies of any such Products or material) among its purchasers on such basis as Seller determines to be equitable without liability for any failure of performance which may result there from.

9. CANCELLATION: Buyer may cancel orders only upon reasonable advance written notice and consent of Seller. If Seller consents to such cancellation, Buyer must pay Seller its cancellation charges which include, among other things, all costs and expenses incurred to cover commitments made by Seller, and a reasonable pro�t thereon. Seller’s determination of such termination charges shall be conclusive.

10. CHANGES: Buyer may request changes or additions to the Products consistent with Seller’s speci�cations and criteria. In the event such changes or additions are accepted by Seller, Seller may revise the price(s) and date(s) of delivery.

Seller reserves the right to change designs, substitutions and speci�cations for the Products without prior notice to Buyer, except with respect to Products being made-to-order for Buyer.

11. ASSIGNMENT: Buyer shall not assign its rights or delegate its duties hereunder or any interest therein or any rights hereunder without the prior written consent of Seller, and any such assignment, without such consent, shall be void.

12. INSTALLATION: Buyer shall be responsible for receiving, inspecting, testing, storing, installing, starting up, and maintaining all Products.

13. GENERAL PROVISIONS: These Terms and Conditions supersede all other communications, negotiations and prior oral or written statements regarding the subject matter of these Terms and Conditions. No change, modi�cation, rescission, discharge, abandonment, or waiver of these Terms and Conditions shall be binding upon Seller unless made in writing and signed on its behalf by a duly authorized representative of Seller. No conditions, usage of trade, course of dealing or performance, understanding or agreement purporting to modify, vary, explain, reject, or supplement these Terms and Conditions shall be binding unless hereafter made in writing and signed by the party to be bound, and no modi�cation shall be a�ected by Seller’s receipt, acknowledgment, or acceptance of purchase orders, shipping instruction forms, or other documentation containing terms at variance with or in addition to those set forth herein. No waiver by either party with respect to any breach or default or of any right or remedy and no course of dealing, shall be deemed to constitute a continuing waiver of any other breach or default or of any other right or remedy, unless such waiver be expressed in writing and signed by the party to be bound. All typographical or clerical errors made by Seller in any quotation, acknowledgment or publication are subject to correction. In the event that any work, phrase, clause, sentence, or other provision hereof shall be deemed unenforceable by a court of law and/or equity, such �nding shall not invalidate all other enforceable provisions hereof.

The validity, performance, and all other matters relating to the interpretation and e�ect of this Agreement shall be governed by the laws of the state of Missouri, without giving e�ect to its con�ict of laws rules. The application of the United Nations Convention on Contracts for the International Sale of Goods and the United Nations Convention on the Limitation Period in the International Sale of Goods to this Agreement is expressly excluded. Buyer and Seller agree that the proper and only venue for all actions arising from, relating to or in connection with this sale shall be the County of St. Louis, State of Missouri, where Seller’s place of business is situated, and the parties agree to submit to such jurisdiction.

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,0394

Product List

DOOR SWITCH / HEADER ASSEMBLY

Door Switch Header Assembly 36” RH/LH Door Switch Header Assembly 42” RH/LH Door Switch Header Assembly 48” RH/LH D S A C M

CONTINUOUS HINGE ELECTRIC HINGE

Continuous Hinge up to 83”

Continuous Hinge up to 96”

Electric Hinge Assembly DS RH

Electric Hinge Assembly DS LH

PANEL / KEYPAD / COMPONENTS / OPTIONS

Control Panel eypad

Switch Interface Module

Strobe Relay Module

Supervised Notification Module

Polling Loop Extender

USB / Serial A C

Short Circuit Isolator

I Module

A A

S L

S D

A P S S L -A B

Full Mortise Hinge

E T P A

D S H

E R S

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 5

The Door SwitchT System Overview

PRODUCT FEATURES

T D S TM

• Designed for new construction or as a retro�t solution for inpatient behavioral healthcare facility doors.

• System keeps an electronic date and time log of the last 512 events (time of alarm, response time, reset time).

• All system components are electronically supervised 24/7 and will notify if maintenance is required. Monitored doors can be isolated from the system during maintenance.

• Electri�ed hinge section factory-made to �t with the switch, no cutting in the �eld.

• Separate from the continuous hinge to provide easy access for maintenance, without the need to take down the door.

• Exposed hardware installed with tamper-resistant screws.

• Switch activation at one pound (1lb.) applied pressure.

• I .

• Control panel controls all functions of The Door SwitchTM system.

• Deluxe keypad used to monitor the status and reset The Door SwitchTM system.

• Strobe light placed above room door gives quick visual location.

• Audible alarm used to notify personnel of a patient room alarm condition.

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,0396

PRODUCT FEATURES

Door Switch / Header Assembly

Header fastened on face of the frame to create between the frame.

Header corner piece on hinge side provides coverage for vulnerable corner and hinge area.

S installed at the top face of the door for detection of a ligature apparatus.

I - .

Creates an immediate a tivation point with the switch ass m l when the door is closed on a ligature apparatus.

Tapered edges reduce catch points.

Switch activation with one pound (1lb) of applied pressure.

Made of non-ferrous material.

C .

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 7

Continuous Hinge & Electric Hinge

PRODUCT FEATURES

PRODUCT FEATURES

Keyswitch

• Keyswitch resets the alarm and mounted next to the room door to assure patient safety.

• Keyswitch (without cylinder) accepts most current key systems.

A .

S .•

RE U RED

U full surface continuous hinge .

Electrified 5” hinge section serves as power transfer for T D S TM.

Factory-made to fit with The Door SwitchTM.

Removable hinge cover provides easy servicing to the wires without the need to remove the door.

Made of non-ferrous material.

Frame reinforcement: None required for doors up to 200 lbs. For doors more than 200 lbs., 16-gauge channel required.

Note: For double acting door applications, please see electrified top pivot assembly, double swing hinge and emergency release stop.

R •

RE U RED

• H

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,0398

PRODUCT FEATURES

Control Panel

Keypad

• Used as a remote panel to monitor the status of The Door SwitchTM system.

• Can be used as remote means of programming the system.

• P .

• Attractive white console with a contoured door.

• 12VDC, 160mA (activated transmission) required (not from the polling loop).

• Large, easy-to-use keypad, soft-touch keys.

• Keys continuously backlit for greater visibility.

• Minimum of one required per system.

• Occupies one bus address on the Control Panel.

• Controls all functions of The Door SwitchTM system.

• Monitors up to 96 doorways (additional components required).

• I 512 .

• 24/7 system component check.

O .

12VDC 750 A auxiliary output for powering The Door SwitchTM components.

Two 12V batteries are supplied for backup power.

Built-in polling loop for The Door SwitchTM aximum current draw of 128mA.

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 9

Switch Interface Module

PRODUCT FEATURES

PRODUCT FEATURES

Strobe Relay Module

• Used to link the strobe to the polling loop.

• One per patient room (1 strobe per patient room).

• 7mA required from the polling loop.

• Electronics mounted in a small plastic - .

• U 2

• O per patient room.

• 2mA required from the polling loop.

• Electronics mounted in a small plastic case - .

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,03910

PRODUCT FEATURES

Supervised Notification Module

Polling Loop Extender

• Module required to expand The Door SwitchTM beyond 12-16 patient rooms.

• Used to add 128mA to the polling loop. To be used:

• After every 12 patient rooms with 2 independently monitored doors per room and 1 strobe.

• After every 16 patient rooms with 1 monitored door per room and 1 strobe.

• May be used to group/isolate polling loop addresses (patient rooms) for ease of troubleshooting and maintenance.

• 12VDC, 400mA required (not from polling loop).

• Electronics mounted in a small plastic case.

• Used to add (2) independent alarm circuits.

• A maximum of 15 modules (30 independent alarm circuits) allowed per panel.

• Occupies one bus address on the ontrol anel.

• 12VDC, 185mA (activated) required (not from the polling loop).

• Electronics ounted in a small lastic case.

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 11

USB/Serial Adapter Cable

PRODUCT FEATURES

PRODUCT FEATURES

Short Circuit Isolator

Used by the installer to perform initial system programming .

Links the control panel to a laptop computer USB port for direct two-way software communication.

Used .

• 12VDC, 25mA required (not from the polling loop).

• Used to provide short circuit isolation between extended polling loops for The Door SwitchTM components.

• When a short occurs on a polling loop branch, an LED is illuminated and isolates the defective branch of the system.

• Reduces troubleshooting time and maintenance costs.

• One Isolator is for each .

• 5mA (activated) required from the polling loop.

E .•

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,03912

PRODUCT FEATURES

Keyswitch Isolation Module

Audible Alarm

• I .

RE U RED

N - 3-5/ H 2-3/ W 1-1/4 D .

• Used to notify personnel of a patient room alarm condition within a specific area of the facility.

• 12VDC, 100mA (activated) required (not from the polling loop).

• Single warble tone.

• 105 dB at 12VDC - Option 80 dB

• White designer look.

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 13

Strobe Light

PRODUCT FEATURES

PRODUCT FEATURES

Stopper Dome

• Used to notify personnel of a specific patient room alarm condition.

• Flash rate of approximately 1 flash per second

• Standard 4" x 4" x 1 1/2" back box, 4" octagon

RE U RED

• Polycarbonate protective cover is used to provide vandal protection for the audible alarm and the strobe.

back box, or single/double-gang back box.

OPTIONAL LENS COLORS

• Amber - Blue - Green - Red

Listed for ceiling or wall mounting. Ligature-resistant design

Wall Mount

This is Optional

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,03914

PRODUCT FEATURES

Auxiliary Power Supply

Sealed Lead-Acid Battery

• Used when additional power is required for powering The Door SwitchTM components not on the polling loop (consult factory).

• UL Listed, Class 2 Rated Power Supply/Charger.

• 12VDC, 10A output.

• One 12V battery supplied for backup power.

Supervised Noti�cation Modules Polling Loop Extenders Keypads A A S L

• Used for backup power to the control panels and auxiliary power supplies.

• 12VDC, 7AH.

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 15

PRODUCT FEATURES

Electrified Pivot Assembly

• Fully Concealed - Heavy Duty.

No door inset, flush mount.

• 48" door width maximum - 450 lbs. door weight maximum.

Frame reinforcement: None required for doors up to 200 lbs. For doors more than 200 lbs., 16-gauge channel required.

Heavy duty hospital tip.

Full Mortise Hinge

Note: For additional double acting door applications, please see double swing hinge and emergency release stop.

Replaces a mechanical version of the same make and model and will serve as the electrical connection between the switch assembly and the system electronics.

T .

• Consult factory for makes and models available.

25/3 2”

21/3 2”

1-9/1 6”

1-3/4

5/16

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,991 and RE44,03916

Double Swing Hinge

Emergency Release Stop

• T D S H 100-

- . C

E R S .

PRODUCT FEATURES

• T E R S . D D

S H . T

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039

Page of Date

Job Site

Adrress

City

State

Phone

Contact

Door Door Outer Inner Outer Inner Door Door Hinge Door

Width Height Frame Frame Frame Frame Handing Type Type Thickness

Width Width Height Height

Door 1 Hall A

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Door Hall

Project Specific Information

The safety of this product depends on the EXACT MEASUREMENTS of EACH DOOR.

Measurements are to be taken from the high/pull side of the door.

* See MEASURING DOORS

Note: Photograph must accompany any doorway that has more than 2" protrusion in the frame or any nonstandard 2" hollow metal frame.

Variations due to molding, wall conditions and circumstances may interfere with The Door Switch™.

1 3/4"

Phone

Address

City

State

Wood Butt

Completed By:

36" 86" 84" RH/LHR

Example

35 3/4" 83" 40"

Project

Company

Door Number

Hallway Number

FULL MORTISEFULL SURFACE

Criteria Sheet Continuous Hinge

DianaOller Text Box

DianaOller Text Box

DianaOller Text Box

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,0391 o ble Acting oor Pivot Criteria Sheet

CRITERIA SHEET

te t t n n n n t n et e t n e t n n t n and t n e nte e e t e t e __1__ __ __

Door Width Minus Radius er Frame idth i ot Door set i ot Make a d Model

Number

Door Thick ess

FIELD ESTIMATE SHEET:

CUSTOMER: ________________________________

ADDRESS: ________________________________

CITY: ________________________________

________________________________STATE:

WORK ORDERED BY

PHONE

e

JOB SITE: _________________________

ADDRESS: _________________________

CITY:

STATE:

PHONE

CONTACT

he afet of thi rod t de end on the S S of H Door The Door Switch is to be mounted on MINUS Radius edge.

* See S D S

Frame Face idth i ot oi t er Frame Hei ht

PAGE ____________

Door Ha di

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 19

DATE

Door Handing

Inner Frame Width

Outer Frame Width

Frame Face Width

Door Size

Frame Height

Door Undercut

F & D Leaf

Threshold (Y / N) FTCOL Backset Lockset & Trim

Model Numbers

RH 36" 40" 2" 30 1/4" 84” 5/8 ” Flush N 42-9/16" 2-3/4" Sargent 8237 BHM

Criteria Sheet Double Swing Hinge

Note: Photograph must accompany any doorway that has more than a 2” protrusion in the frame, or any nonstandard 2” hollow metal frame.

Variations due to molding, wall conditions and circumstances may interfere with The Door Switch™

CUSTOMER:

Door _____ Hall _____

PHONE

Door _____ Hall _____

COMPLETED BY:

PHONE:

Door Number & Hall

Example

Door _1__ Hall _A__

JOB SITE:

ADDRESS:

CITY

STATE

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall_____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

The safety of this product depends on the EXACT MEASUREMENTS of EACH Door.

Measure doors on the same side The Door Switch is to be mounted.

See Measuring Doors Double Swing Hinge

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

Door _____ Hall _____

CONTACT

FIELD ESTIMATE SHEET:

ADDRESS:

CITY:

STATE:

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039

Liability Release Form imitation of ia ilit

S P _______________________________ O D ______/______/_______

1.

2.

3.

4.

5.

T T D S S -

P

S P S S

P S

P P .

P P S S -

P S

P .

I S S . A

P .

P S S S .

G

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 21

Typical Door Switch System Layout

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,03922 ea ring for ontin o Hinge li ation ea ring for Do le ting Door Pivot

Measuring Doors

PRODUCT BOOK | (877) 998-5625 | www.thedoorswitch.com | Patent No. RE42,99 and RE44,039 23 ea ring for Do le S ing Hinge

Measuring Doors

FRAME WIDTH

3"

HINGE

WIDTH

1/8" MIN

FRAME TO DOOR

DOOR UNDERCUT

1/8"

FRAME

TO

DOOR

FRAME TO

CENTERLINE

OF LOCK SET

(FTCOL)

BACKSET

8" SER

FRAME

HEIGHT

FRAME FACE WIDTH

FRAME

FACE

WIDTH

FRAME

FACE

WIDTH

For more information, please visit www.thedoorswitch.com or call toll free at (877) 998-5625.

Life More Secure.

The Door Switch is a patented design. Pat No. 7,466,237

Effective August 13, 2010

Life More Secure.

www.thedoorswitch.com

11772 Westline Industrial Dr.

St. Louis, MO 63146 local (314) 298-3433 toll free (877) 998-5625 fax (314) 739-4932

The Door Switch is an over-the-door preventative measure for your psychiatric facilities.