Existing Door Alarm Support Hardware Submittal.pdf

KEYSWITCH - SINGLE GANG

USER’S GUIDE

1 Mounting Installation

75.1020.05.EN 20140103 - SEE OTHER SIDE FOR JAMB KEYSWITCH - Page 1 of 1

2 Precautions Shut off all power before attempting any wiring procedures.

Maintain a clean & safe environment when working in public areas.

Constantly be aware of pedestrian traffic around the area.

Always stop pedestrian traffic when performing tests that may result in unexpected reactions.

ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge.

Before handling any board ensure you dissipate your body’s charge.

Always check placement of all wiring before powering up to insure that moving parts will not catch any wires and cause damage to equipment.

Ensure compliance with all applicable safety standards (i.e. ANSI A156.10 / A156.19) upon completion of installation.

DO NOT attempt any internal repair. All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized disassembly or repair:

1. May jeopardize personal safety and may expose one to the risk of electrical shock.

2. May adversely affect the safe and reliable performance of the product will result in a voided product warranty.

3 Company Contact

MOMENTARY / ON-OFF SPDT KEYSWITCH

Corbin Russwin® #ML2200, Schlage® #B520-233 or Equivalent

SINGLE GANG KEYSWITCH

(10KEYSWITCHMOM / 10KEYSWITCHONF)

Adjust height of switch on bracket until cam triggers positively when rotated.

4.

0”

3.

0” 0.

5”

3.000”

1.500”

0.

0”

SWITCH BRACKET

CYLINDER LOCK

FACE

PLATE

SWITCH

3A @ 250VAC

YELLOW- NO

WHITE - COM

RED - NC

6A @ 125VAC

1 1/8”

MORTISE

CYLINDER

Select shape of cam shown for no. of switches used (specify when ordering cylinder).

Schlage® #B520-256, Yale® #2160, Arrow® #004, Sargent® #13-0660 or Equivalent

Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please call BEA, Inc. If you must wait for the following workday to call BEA, leave the door inoperable until satisfactory repairs can be made. Never sacrifice the safe operation of the automatic door or gate for an incomplete solution.

The following numbers can be called 24 hours a day, 7 days a week. For more information, visit www.beasensors.com.

East:

Canada and Texas:

1-866-249-7937 1-866-836-1863

Central:

West:

1-800-407-4545 1-888-419-2564

Plain Horn Strobes, Speaker Strobes, and Strobes SpectrAlert® Advance Plain Notification Appliances

SpectrAlert Advance plain horn strobes, speaker strobes, and strobes were designed to reduce installation time and meet a wide variety of Mass Notification and Emergency Communication applications. All of the plain notification appliances carry the same product specifications as the “FIRE” marked products. Compatible with our colored lenses and decal kits to provide distinctive visual signaling during and emergency. Model numbers with a “K” suffix are outdoor rated products that are listed to UL 1638 and UL 1480 and are rated from -40° F to 151° F (-40° C to 66° C) and have a NEMA 4X rating. The outdoor models ship with the plastic outdoor back box.

Plain Ceiling-Mount Speaker Strobes Location Red Model No. White Model No. Candela Marking* Description

Indoor — SPSCW-P Standard None Clear lens

— SPSCWV-P Standard None High volume dB, Clear lens

— SPSCWH-P High None Clear lens

Outdoor — SPSCWHK-P High None Clear lens

Plain Wall-Mount Speaker Strobes Location Red Model No. White Model No. Candela Marking* Description

Indoor SPSR-P SPSW-P Standard None Clear lens

— SPSWH-P High None Clear lens

Outdoor SPSRK-P SPSWK-P Standard None Clear lens

Plain Ceiling-Mount Strobes Location Red Model No. White Model No. Candela Marking* Description

Indoor — SCW-P Standard None Clear Lens

Plain Wall-Mount Strobes Location Red Model No. White Model No. Candela Marking* Description

Indoor SR-P SW-P Standard None Clear lens

— SWH-P High None Clear lens

Outdoor SRK-P SWK-P Standard None Clear lens

SRHK-P SWHK-P High None Clear lens

Notes:

• Standard Candela settings: 15, 15/75, 30, 75, 95, 110, and 115

• High Candela settings: 135, 150, 177, and 185

• -P denotes plain devices with no markings.

• *Compatible with DECAL-R and DECAL-RC for white devices (red letters) and DECAL-W or DECAL-WC for red devices (white letters).

Ceiling-Mount Horn Strobes Location Red Model No. White Model No. Candela Marking* Description

Indoor PC2R-P PC2W-P Standard None 2-Wire, Clear Lens

— PC2WH-P High None 2-Wire, Clear Lens

Wall-Mount Horn Strobes Location Red Model No. White Model No. Candela Marking* Description

Indoor P2R-P P2W-P Standard None 2-Wire, Clear Lens

— P2WH-P High None 2-Wire, Clear Lens

P4R-P P4W-P Standard None 4-Wire, Clear Lens

Outdoor P2RK-P P2WK-P Standard None 2-Wire, Clear Lens

P2RHK-P P2WHK-P High None 2-Wire, Clear Lens ayacoub Rectangle ayacoub Rectangle

SpectrAlert Advance devices can be adapted to nearly any application with the appropriate accessory. Our mounting options allow our strobes, speakers, horns, chimes, and strobe combinations to be placed in new or existing construction with professional results.

Audible Visible Accessories

Ceiling-Mount Back Boxes Location Red Model No. White Model No. Description

Indoor SBBCR SBBCW Surface-mount back box for ceiling-mount horns, strobes, horn strobes, speakers, and speaker strobes

Outdoor SA-WBBC SA-WBBCW Metal outdoor back box for ceiling-mount horns, strobes, and horn strobes

— MWBBCW Metal weatherproof back box for speakers and speaker strobes

Wall-Mount Back Boxes Location Red Model No. White Model No. Description

Indoor SBBR SBBW Surface-mount back box for wall-mount horns, strobes, and horn strobes

SBBSPR SBBSPW Surface-mount back box for wall-mount speakers and speaker strobes

Outdoor SA-WBB SA-WBBW Metal outdoor back box for wall-mount horns, strobes, and horn strobes

MWBB MWBBW Metal outdoor back box for speakers and speaker strobes

Colored Lenses - For use with plain (non-FIRE marked) strobe devices.

Ceiling Model No. Wall Model No. Color Description

LENS-AC LENS-A Amber Lens attachment for all SpectrAlert Advance plain (non-FIRE marked) indoor or outdoor, ceiling- or wall-mounted strobesLENS-BC LENS-B Blue

LENS-GC LENS-G Green

LENS-RC LENS-R Red

Decal Kits - For use with plain (non-FIRE marked) devices.

Mounting Model No. Color Description

Ceiling DECAL-RC Red Letters 60 decals* for up to 5 white devices (3 decals are required per device)

DECAL-WC White Letters 60 decals* for up to 5 red devices (3 decals are required per device)

Wall DECAL-R Red Letters 40 decals* for up to 5 white devices (2 decals are required per device)

DECAL-W White Letters 40 decals* for up to 5 red devices (2 decals are required per device)

*All decals include labels “AGENT, EVAC, ALERT and FIRE” for up to 5 devices.

Back Box Skirts Mounting Red Model No. White Model No. Description

Wall — BBS-SP201W Wall-mount back box skirt for ExitPoint Directional Sounder

— SEP-BBSW Strobe expander plate back box skirt for Dual Strobe Expander Plates

— SPSEP-BBSW Speaker strobe expander plate back box skirt for Dual Strobe Expander Plates

Optional Lens Colors ayacoub Rectangle ayacoub Rectangle ayacoub Rectangle

Specifications and Ratings

UL Max. Strobe Current Draw (mA RMS)

Candela

8–17.5 Volts 16–33 Volts

DC FWR DC FWR

Standard Candela Range 15 123 128 66 71

15/75 142 148 77 81

30 NA NA 94 96

75 NA NA 158 153

95 NA NA 181 176

110 NA NA 202 195

115 NA NA 210 205

High Candela Range 135 NA NA 228 207

150 NA NA 246 220

177 NA NA 281 251

185 NA NA 286 258

UL Max. Horn Current Draw (mA RMS)

Sound Pattern dB

8–17.5 Volts 16–33 Volts

DC FWR DC FWR

Temporal High 57 55 69 75

Temporal Medium 44 49 58 69

Temporal Low 38 44 44 48

Non-Temporal High 57 56 69 75

Non-Temporal Medium 42 50 60 69

Non-Temporal Low 41 44 50 50

Coded High 57 55 69 75

Coded Medium 44 51 56 69

Coded Low 40 46 52 50

Horn Output (dBA) in UL Reverberant Room

Switch Position Sound Pattern dB

8–17.5 Volts** 16–33 Volts**

24 Volt Nominal Measurements

Reverberant Anechoic

DC FWR DC FWR DC FWR DC FWR

1 Temporal High 78 78 84 84 88 88 99 98

2 Temporal Medium 75 75 80 80 86 85 96 96

3 Temporal Low 71 71 76 76 81 79 94 89

4 Non-Temporal High 82 82 88 88 93 92 100 100

5 Non-Temporal Medium 78 78 85 85 90 89 98 98

6 Non-Temporal Low 73 74 81 81 86 84 96 92

7* Coded High 82 82 88 88 93 92 101 101

8* Coded Medium 78 78 85 85 90 89 97 98

9* Coded Low 74 75 81 81 85 83 96 92 *Horn & 4-wire Horn Strobe only. **Minimum dB rating for Operational Voltage Range per UL 464.

Mini-Horn Output (dBA)

Pattern Output Level 8–17.5 VDC 8–17.5 VFWR Nominal

12 VDC

Nominal

12 VFWR 16–33 VDC

16–33

VFWR

Temporal High 68 67 71 70 78 76

Temporal Low 66 65 69 68 76 75

Continuous High 72 71 75 74 80 79

Continuous Low 70 69 73 72 78 77

UL Max. Mini-Horn Current Draw (mA RMS)

Sound Pattern Volume

8–17.5 Volts 16–33 Volts

DC FWR DC FWR

Temporal High 12 10 17 15

Temporal Low 10 9 14 13

Non-Temporal High 22 17 29 25

Non-Temporal Low 17 13 21 19

21systemsensor.com/av

UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, Standard Candela Range (15–115 cd)

DC Input

8–17.5 Volts 16–33 Volts

15 15/75 15 15/75 30 75 95 110 115

Temporal High 137 147 79 90 107 176 194 212 218

Temporal Medium 132 144 69 80 97 157 182 201 210

Temporal Low 132 143 66 77 93 154 179 198 207

Non-Temporal High 141 152 91 100 116 176 201 221 229

Non-Temporal Medium 133 145 75 85 102 163 187 207 216

Non-Temporal Low 131 144 68 79 96 156 182 201 210

FWR Input

Temporal High 136 155 88 97 112 168 190 210 218

Temporal Medium 129 152 78 88 103 160 184 202 206

Temporal Low 129 151 76 86 101 160 184 194 201

Non-Temporal High 142 161 103 112 126 181 203 221 229

Non-Temporal Medium 134 155 85 95 110 166 189 208 216

Non-Temporal Low 132 154 80 90 105 161 184 202 211

UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, High Candela Range (135–185 cd)

DC Input

16–33 Volts

FWR Input

16–33 Volts

135 150 177 185 135 150 177 185

Temporal High 245 259 290 297 Temporal High 215 231 258 265

Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258

Temporal Low 232 251 282 292 Temporal Low 207 221 248 256

Non-Temporal High 255 270 303 309 Non-Temporal High 233 248 275 281

Non-Temporal Medium 242 259 293 299 Non-Temporal Medium 219 232 262 267

Non-Temporal Low 238 254 291 295 Non-Temporal Low 214 229 256 262

Rotary Horn and Horn Strobe Switch Settings

Setting Repetition Rate dB Level

1 Temporal Horn High

2 Temporal Horn Medium

3 Temporal Horn Low

4 Normal Horn High

5 Normal Horn Medium

6 Normal Horn Low

7* Externally Coded High

8* Externally Coded Medium

9* Externally Coded Low

*Horn and 4-wire horn strobe only.

UL Max. Chime Current Draw (mA RMS)

Sound Pattern dB

8–17.5 Volts 16–33 Volts

DC FWR DC FWR

1 Second Chime High 34 50 58 51

1 Second Chime Low 30 51 51 54

¼ Second Chime High 34 51 50 50

¼ Second Chime Low 31 51 50 52

Temporal Chime High 30 50 48 54

Temporal Chime Low 30 47 50 51

5 Second Whoop High 32 52 34 54

5 Second Whoop Low 30 40 34 52

One Test Chime/coded High 48 49 50 50

Specifications and Ratings

ExitPoint™ Current Draw Measurements and Sound Output Guide

Speed Selection Maximum DC Operating Current

(mA RMS) (16 to 33 V)

Audibility (dBA) (16 to 33 V)

Note 1

Audibility (dBA) (16 to 33 V)

Note 2Speed

DIP

Switch

Selection Power Setting

Fast (Exit) 10 High 185 98 75

Fast (Exit) 10 Med-High 131 95 72

Fast (Exit) 10 Med 78 92 69

Fast (Exit) 10 Med-Low 76 89 66

Fast (Exit) 10 Low 64 86 63

Med-Fast 9 High 170 98 74

Med-Fast 9 Med-High 124 95 71

Med-Fast 9 Med 75 93 68

Med-Fast 9 Med-Low 73 90 65

Med-Fast 9 Low 62 87 62

Med-Slow 8 High 135 97 73

Med-Slow 8 Med-High 104 95 70

Med-Slow 8 Med 67 92 67

Med-Slow 8 Med-Low 65 89 64

Med-Slow 8 Low 57 87 61

Slow 7 High 120 98 72

Slow 7 Med-High 92 95 69

Slow 7 Med 62 92 66

Slow 7 Med-Low 61 89 63

Slow 7 Low 54 86 60 Note 1: Sound output data peak dB measured in ULC anechoic room at 10 feet.

Note 2: Sound output measured in a reverberant room at 10 feet.

Low Frequency Sounder Output (dBA) in Reverberant (UL**) and Anechoic Room:

Switch Position Sound Pattern 8–17.5 Volts** 16–33 Volts**

24 V Nominal Measurements

Reverberant Anechoic

DC FWR DC FWR DC FWR DC FWR

1 Temporal 76 76 76 76 76 76 86 86 2 Continuous 80 80 80 80 80 80 90 90 3* Coded 80 80 80 80 80 80 90 90

*Sounder ratings provided are for continuous voltage as provided by the NAC.

** Minimum dB rating for Operational Voltage Range as per UL 464.

Sound Pattern 16–33 Volts DC 16–33 Volts FWR

135 cd 150 cd 177 cd 185 cd 135 cd 150 cd 177 cd 185 cd

Temporal 277 292 325 344 296 309 343 351

Continuous 337 362 387 417 393 395 432 433

Low Frequency Sounder/Strobe Current Draw (mA) for P2H-LF High Candela Range Series:

Low Frequency Sounder Current Draw (mA) for H-LF Series:

Position Sound Pattern 8–17.5 Volts 16–33 Volts

DC FWR DC FWR

1 Temporal 191 262 138 166 2 Continuous 292 384 138 208 3 Coded 292 388 153 205

NOTE: In position 3, temporal coding must be provided by the NAC. If the NAC voltage is held constant, the sounder output will remain constantly on. Coded ratings provided are for continuous voltage.

Position 3 is not available on 2-wire low frequency sounder/strobe products.

23systemsensor.com/av

Standard Operating Temperature 32°F to 120°F (0°C to 49°C)

K Series Operating Temperature –40°F to 151°F (–40°C to 66°C)

Humidity Range 10% to 93% non-condensing (indoor products)

Strobe Flash Rate 1 flash per second

Nominal Voltage Regulated 12 DC/FWR or regulated

24 DC/FWR1

Operating Voltage Range2

8 V to 17.5 V (12 V nominal) or 16 V to 33 V (24 V nominal)

Input Terminal Wire Gauge 12 AWG to 18 AWG

Ceiling-Mount Dimensions (including lens)

6.8 in Dia. × 2.5 in H (173 mm Dia. × 64 mm H)

Wall Weatherproof Back Box Dimensions

5.7 in L × 5.1 in W × 2.0 in D (145 mm L × 130 mm W × 51 mm D)

Notes:

1. Full Wave Rectified (FWR) voltage is an unfiltered, time-varying power source that is used on some power supply and panel outputs.

2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd.

3. To calculate current draw for 4-wire horn strobes, combine horn and strobe current draws from the tables at left.

Specifications

Indoor Speaker and Speaker Strobe Sound Output

UL Reverberant (dBA @ 10 ft.) 2 W 1 W ½ W ¼ W

Wall- and Ceiling-Mount SP Series 86 83 80 77

Wall- and Ceiling-Mount SPV Series 90 87 84 81

Wall- and Ceiling-Mount SPS Series 85 82 79 76

Wall- and Ceiling-Mount SPSV Series 89 86 83 80

Outdoor Speaker and Speaker Strobe Sound Output

UL Reverberant (dBA @ 10 ft.) 2 W 1 W ½ W ¼ W

Wall- and Ceiling-Mount Speaker K Series 90 87 84 81

Wall- and Ceiling-Mount Speaker Strobe K Series 89 86 83 80

Candela Measurements, Amber Lens Strobe

Candela On-Axis Rating (UL 1638)

Standard Candela Range 15 15

15/75 15/75

30 30

75 75

95 95

110 110

115 115

High Candela Range 135 135

150 150

177 177

185 185