Exhibit E Material Source Narrative~4.pdf

Oregon Department of Transportation

Region 5 Geology 3012 Island Avenue

La Grande, OR 97850

(541) 963-1598; (541) 410-6693 cell

September 24, 2024

To: Paul Howland Assistant D12 Manager, Pendleton

Rich Lani District 12 Manager, Pendleton

From: Bobbi Jean Cummiskey Region 4/5 Engineering Geologist

Subject: Material Source Narrative D12 Sanding Rock Production Project 2024 Grant County

RE: Prospective Material Source Rose and Bone Creek Quarry ODOT Source #OR-12-002-5, DOGAMI #12-0058 E½ NE¼ Sec. 31, T. 9 S., R. 26 E., W.M.

OR19 (Hwy 005), M.P. 106.01

This narrative memo and all of the attachments (laboratory testing data, Grant County Land Use permit, and the DOGAMI Operating Permit), should be duplicated and distributed to all bidders that inquire about this prospective material source, according to Section 00120.25 of the 2024 Standard Specifications for Highway Construction. This is an existing ODOT-owned material source.

ODOT Region 5 is offering this prospective material source for production of crushed aggregate for winter traction aggregate. The development plan for this source is based upon estimated project material requirements of 15,000 cubic yards (cyds) of material. The quarry development plan sheets identify an excavation area and associated volume adequate to supply the aggregate materials necessary to complete this project.

The Rose & Bone Creek Quarry is located in the Blue Mountain physiographic province of northeastern Oregon. This site is within an area mapped by DOGAMI (W.H. White, 1964; C.E.

Brown, 1966) as mainly the lava flows of the Picture Gorge Basalt unit over the volcaniclastics of the John Day Formation, both part of the Columbia River Basalt Group, erupted predominantly during the Miocene geologic Epoch. The Picture Gorge Basalt unit is comprised of multiple flows of fine-grained and hard basalt with interflows of poor quality volcanic breccia that becomes predominant in the underlying John Day Formation. The quarry is located near the

September 24, 2024 Page | 2 confluence of the North Fork with the main John Day River. The topography in the quarry rises rapidly from about elevation 1850 adjacent the highway to over 2400 feet in the cliffs to the east.

Subsurface drilling exploration has not been performed at this site. Limited laboratory testing has been performed on some of the rock types present at this site. Two bulk samples were collected at the site, one from a previously existing ‘stone embankment’ stockpile, and one described as ‘basalt’. The locations of these tests are not known. The laboratory test results are attached to this narrative.

Aggregate from the Rose & Bone Quarry has been used intermittently for various ODOT Maintenance projects since the site was acquired in 1962. Information concerning the operational history in this source is limited though. Some information is available for review in the Region 5 Geology office in La Grande. Any contractor interested in looking at any available information not provided here should call and schedule a time to review the material. Someone from the Geology staff must be present when the information is being reviewed to maintain accuracy and consistency in distribution of information.

The development concept for this entry is to drill and shoot to the south of the rock point as shown on the development plan, establishing benches at 2040 and 2790 feet elevation. The shot material can be pushed down over the slope, collected at the bottom, and processed as needed to meet the aggregate gradation specifications for crushed sanding aggregate. There are existing bench access roads but they will need to be regraded and improved in accordance with Special Provision 00235.42(a) prior to use.

The general development plan for this quarry is to have future entries continue mining to the east while progressing to north and south until reaching the resource limits. Due to the topographic conditions at the site and how the quality rock lays in the site it will be difficult to increase processing and stockpiling areas in the near future. There are several existing areas in the site that have been developed by past activities that are available for processing equipment set up and stockpiling.

In conformance with the Standard Specifications for Highway Construction, subsection 00120.15 Examination of Work Site and Bidding Documents, Contractors should make an on-site visit to this source to familiarize themselves with the existing conditions and appearance of the source and to visually inspect the existing quarry faces and the surrounding ground surface in advance of bid preparation. Based on the on-site visit and review of all available information, Contractors will then be able to use their best judgment to prepare a bid based upon existing site conditions, the conditions they expect to encounter at the time of the proposed operation, and on the most accurate information available for the source.

Documentation contained within this material source narrative packet, such as the development plan maps and operating specifications, is for informational purposes only; they are not meant to replace those pages supplied in the Project Bid Packet.

September 24, 2024 Page | 3

Attachments:

DOGAMI Permit Grant County Land Use permit Laboratory Testing Data