Exhibit E. Lottie Schmidt MEP Drawing Set (1).pdf

PDF 15 MB Posted May 15, 2026

Attached to: Chillers & Chilled Water Pump Upgrades
Solicitation number: RFQ ABS 260000000308 2
Issued by: Macomb County, Michigan

About this file

Written by GovTribe AI · May 18, 2026

This document is a construction drawing set for an HVAC upgrade project at Schmidt Elementary School in the Anchor Bay School District, located at 33700 Hooker Road, New Baltimore, Michigan 48047. The project involves the design and installation of heating, ventilation, and air conditioning systems, including mechanical, electrical, and temperature control components. The construction documents are dated May 1, 2026, and were prepared by Peter Basso Associates, a consulting engineering firm located in Troy, Michigan. The drawing set includes mechanical standards and drawing indices, electrical standards and schedules, composite plans for new work and demolition, mechanical details and schedules, temperature control systems documentation, and building automation system architecture diagrams. The project specifications outline detailed requirements for HVAC equipment installation, control systems integration, and coordination between multiple trades including mechanical, electrical, and temperature controls contractors.

The temperature control requirements specify that a Temperature Controls (TC) Contractor shall be responsible for furnishing and installing all control components, DDC (Direct Digital Control) controllers, sensors, actuators, control valves, and associated wiring per the design specifications. The system includes variable frequency controllers for chilled water pumps, current monitoring devices, differential pressure switches, and BACnet MS/TP communication interfaces for building automation system integration. The chilled water system is designed to operate at 280 GPM with a supply temperature setpoint of 42°F, includes dual circulation pumps with automatic failover capability, and requires coordination with the existing Automated Logic building automation system. All control panels, transformers, auxiliary panels, and field-mounted components must be located and secured per specifications, with power supplies and raceway systems complying with electrical code requirements and separation of 120V and 24V circuits.

View the file

Other files

File	Type	Posted
MacDonald Temperature Controls.jpg	JPG image	May 15, 2026
Exhibit F. MacDonald Elementary MEP Drawing Set (1).pdf	PDF	May 15, 2026
Exhibit C. M&E Specifications for Construction Documents.pdf	PDF	May 15, 2026
Exhibit A. Subcontractor Master Agreement.pdf	PDF	May 15, 2026
Anchor Bay School District - Chillers RFP Ph 1_May 15 2026.pdf	PDF	May 15, 2026
Lottie Temperature Controls.jpg	JPG image	May 15, 2026
Exhibit H. Residual Value and Disposition of Existing Chillers.pdf	PDF	May 15, 2026
Lighthouse Temperature Controls.jpg	JPG image	May 15, 2026
Exhibit G. Maconce Elementary MEP Drawing Set (1) (1).pdf.bz2	BZ2 file	May 15, 2026
Anchor Bay Schools 2025 Energy Services Performance Contract - M&E Specifications for Construction Documents.pdf	PDF	May 15, 2026
ABSD Chillers & CHWP RFP Bid Notice 051526.pdf	PDF	May 15, 2026
Exhibit D. Lighthouse Elementary MEP Drawing Set (1).pdf	PDF	May 15, 2026
Maconce Temperture Controls.jpg	JPG image	May 15, 2026

Show all 13

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

ANCHOR BAY SCHOOL DISTRICT

SCHMIDT ELEMENTARY SCHOOL

HVAC Upgrade

33700 Hooker Rd, New Baltimore, MI 48047

CONSTRUCTION DOCUMENTS 05/01/2026

MECHANICAL DRAWING INDEX ELECTRICAL DRAWING INDEX

NO SCALE

LOCATION MAP

5145 Livernois, Suite 100 Troy, Michigan 48098-3276

Tel: 248-879-5666 www.PeterBassoAssociates.com

PBA Project No.: 2026.0034.54

Peter Basso Associates

CODES AND STANDARDS

PROJECT LOCATION

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

D S

D R

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

R E

O M

O R

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

O N

N E

G R

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

R E

O M

O N

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

N D

D D

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

C O

W O

R K

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

S C

L D

T E

. N

, M I 4

N R

SHEET No.

DATE

05-01-2026

ISSUE

CONSTRUCTION

DOCUMENTS

L iv er no is , S ui te

Tr oy

, M ic hi ga n

-3

Te l:

9-ww w.

Pe te rB as so

As so cia te s.

co m

A Pr oj ec t N o.

: 2

P et er

B as so A ss o ci at es

R E

C O

AutoCAD SHX Text

1-PHASE POWER APPLICATION - COMBO DDC MONITORING & CONTROL

AutoCAD SHX Text N

AutoCAD SHX Text H

AutoCAD SHX Text 120V

AutoCAD SHX Text

DRY CONTACT CLOSURE FOR RUN STATUS OR AMP DRAW TO DDC CONTROLLER

AutoCAD SHX Text

INDUCTION MOTOR (M) OR ELECTRONICALLY COMMUTATED MOTOR (ECM) PER PROJECT DETAILS

AutoCAD SHX Text R

AutoCAD SHX Text CONTROL WIRED IN SERIES PER TC DETAILS (SW, TIMER, OCC SENSOR WIRING INTERLOCK, ETC.)

AutoCAD SHX Text

ON/OFF (ENABLE/DISABLE) COMMAND FR0M DDC CONTROLLER

AutoCAD SHX Text

24V POWER SUPPLY PROVIDED BY TC CONTRACTOR

AutoCAD SHX Text LOCATE CONTROL COMPONENTS IN ELECTRICAL JUNCTION BOX WITH EXTENSION RING AS REQUIRED UNLESS DEVICE HAS SELF-CONTAINED ENCLOSURE

AutoCAD SHX Text

1-PHASE POWER APPLICATION - DDC MONITORING

AutoCAD SHX Text LOCATE CONTROL COMPONENTS IN ELECTRICAL JUNCTION BOX WITH EXTENSION RING AS REQUIRED

AutoCAD SHX Text

BUILT-IN RELAY

AutoCAD SHX Text N

AutoCAD SHX Text H

AutoCAD SHX Text 120V

AutoCAD SHX Text

DRY CONTACT CLOSURE FOR RUN STATUS OR AMP DRAW TO DDC CONTROLLER

AutoCAD SHX Text

INDUCTION MOTOR (M) OR ELECTRONICALLY COMMUTATED MOTOR (ECM) PER PROJECT DETAILS

AutoCAD SHX Text CONTROL WIRED IN SERIES PER TC DETAILS (DDC, SW, TIMER, OCC SENSOR WIRING INTERLOCK, ETC.)

AutoCAD SHX Text

1. THESE GENERAL NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) THESE GENERAL NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) GENERAL NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) GENERAL NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) NOTES SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) SHALL BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) BE APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) APPLICABLE FOR ALL TEMPERATURE CONTROL (TC) FOR ALL TEMPERATURE CONTROL (TC) FOR ALL TEMPERATURE CONTROL (TC) ALL TEMPERATURE CONTROL (TC) ALL TEMPERATURE CONTROL (TC) TEMPERATURE CONTROL (TC) TEMPERATURE CONTROL (TC) CONTROL (TC) CONTROL (TC) (TC) (TC) DRAWINGS. 2. "PROVIDE" IS DEFINED AS "FURNISH AND INSTALL". "PROVIDE" IS DEFINED AS "FURNISH AND INSTALL". 3. TEMPERATURE CONTROLS CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO TEMPERATURE CONTROLS CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTROLS CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTROLS CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTRACTOR (TC CONTRACTOR) SHALL BE RESPONSIBLE TO (TC CONTRACTOR) SHALL BE RESPONSIBLE TO (TC CONTRACTOR) SHALL BE RESPONSIBLE TO CONTRACTOR) SHALL BE RESPONSIBLE TO CONTRACTOR) SHALL BE RESPONSIBLE TO SHALL BE RESPONSIBLE TO SHALL BE RESPONSIBLE TO BE RESPONSIBLE TO BE RESPONSIBLE TO RESPONSIBLE TO RESPONSIBLE TO TO TO COMPLY WITH ALL APPLICABLE CODES AND STANDARDS. 4. FOR TEMPERATURE CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED FOR TEMPERATURE CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED TEMPERATURE CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED TEMPERATURE CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED CONTROL DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED DRAWINGS ONLY: ALL DETAILED INFORMATION IDENTIFIED ONLY: ALL DETAILED INFORMATION IDENTIFIED ONLY: ALL DETAILED INFORMATION IDENTIFIED ALL DETAILED INFORMATION IDENTIFIED ALL DETAILED INFORMATION IDENTIFIED ALL DETAILED INFORMATION IDENTIFIED DETAILED INFORMATION IDENTIFIED DETAILED INFORMATION IDENTIFIED INFORMATION IDENTIFIED INFORMATION IDENTIFIED IDENTIFIED IDENTIFIED WITH HEAVY LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER HEAVY LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER HEAVY LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER LINE WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER WEIGHT SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER SHALL BE PROVIDED BY TC CONTRACTOR. ALL OTHER BE PROVIDED BY TC CONTRACTOR. ALL OTHER BE PROVIDED BY TC CONTRACTOR. ALL OTHER PROVIDED BY TC CONTRACTOR. ALL OTHER PROVIDED BY TC CONTRACTOR. ALL OTHER BY TC CONTRACTOR. ALL OTHER BY TC CONTRACTOR. ALL OTHER TC CONTRACTOR. ALL OTHER TC CONTRACTOR. ALL OTHER CONTRACTOR. ALL OTHER CONTRACTOR. ALL OTHER ALL OTHER ALL OTHER ALL OTHER OTHER OTHER INFORMATION IDENTIFIED WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER IDENTIFIED WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER IDENTIFIED WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER WITH LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER LIGHT LINE WEIGHT SHALL BE PROVIDED BY OTHER LINE WEIGHT SHALL BE PROVIDED BY OTHER LINE WEIGHT SHALL BE PROVIDED BY OTHER WEIGHT SHALL BE PROVIDED BY OTHER WEIGHT SHALL BE PROVIDED BY OTHER SHALL BE PROVIDED BY OTHER SHALL BE PROVIDED BY OTHER BE PROVIDED BY OTHER BE PROVIDED BY OTHER PROVIDED BY OTHER PROVIDED BY OTHER BY OTHER BY OTHER OTHER OTHER TRADES. 5. ALL CONTROL SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF ALL CONTROL SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF CONTROL SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF CONTROL SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF SCHEMATICS AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF AND WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF WIRING DIAGRAMS ARE FOR THE CLARIFICATION OF DIAGRAMS ARE FOR THE CLARIFICATION OF DIAGRAMS ARE FOR THE CLARIFICATION OF ARE FOR THE CLARIFICATION OF ARE FOR THE CLARIFICATION OF FOR THE CLARIFICATION OF FOR THE CLARIFICATION OF THE CLARIFICATION OF THE CLARIFICATION OF CLARIFICATION OF CLARIFICATION OF OF OF EQUIPMENT INTERLOCKING FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' INTERLOCKING FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' INTERLOCKING FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' FUNCTIONS AND THE INTERFACE OF VARIOUS CONTRACTORS' AND THE INTERFACE OF VARIOUS CONTRACTORS' AND THE INTERFACE OF VARIOUS CONTRACTORS' THE INTERFACE OF VARIOUS CONTRACTORS' THE INTERFACE OF VARIOUS CONTRACTORS' INTERFACE OF VARIOUS CONTRACTORS' INTERFACE OF VARIOUS CONTRACTORS' OF VARIOUS CONTRACTORS' OF VARIOUS CONTRACTORS' VARIOUS CONTRACTORS' VARIOUS CONTRACTORS' CONTRACTORS' CONTRACTORS' WORK AND SHALL NOT BE MISTAKEN AS SHOP DRAWINGS FOR ACTUAL INSTALLATION. 6. TC CONTRACTOR SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF TC CONTRACTOR SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF CONTRACTOR SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF CONTRACTOR SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF SHALL PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF PROVIDE DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF DDC CONTROLLERS AS REQUIRED TO MEET INTENT OF CONTROLLERS AS REQUIRED TO MEET INTENT OF CONTROLLERS AS REQUIRED TO MEET INTENT OF AS REQUIRED TO MEET INTENT OF AS REQUIRED TO MEET INTENT OF REQUIRED TO MEET INTENT OF REQUIRED TO MEET INTENT OF TO MEET INTENT OF TO MEET INTENT OF MEET INTENT OF MEET INTENT OF INTENT OF INTENT OF OF OF DESIGN DOCUMENTS. REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY DOCUMENTS. REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY DOCUMENTS. REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY REFER TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY TO THE PLANS FOR THE DDC FUNCTIONS THAT APPLY THE PLANS FOR THE DDC FUNCTIONS THAT APPLY THE PLANS FOR THE DDC FUNCTIONS THAT APPLY PLANS FOR THE DDC FUNCTIONS THAT APPLY PLANS FOR THE DDC FUNCTIONS THAT APPLY FOR THE DDC FUNCTIONS THAT APPLY FOR THE DDC FUNCTIONS THAT APPLY THE DDC FUNCTIONS THAT APPLY THE DDC FUNCTIONS THAT APPLY DDC FUNCTIONS THAT APPLY DDC FUNCTIONS THAT APPLY FUNCTIONS THAT APPLY FUNCTIONS THAT APPLY THAT APPLY THAT APPLY APPLY APPLY TO EACH MECHANICAL SYSTEM. 7. ALL TC PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL ALL TC PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL TC PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL TC PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL PROVIDED COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL COMPONENTS AND ALL TC CONTRACTOR INSTALLED WIRING SHALL AND ALL TC CONTRACTOR INSTALLED WIRING SHALL AND ALL TC CONTRACTOR INSTALLED WIRING SHALL ALL TC CONTRACTOR INSTALLED WIRING SHALL ALL TC CONTRACTOR INSTALLED WIRING SHALL TC CONTRACTOR INSTALLED WIRING SHALL TC CONTRACTOR INSTALLED WIRING SHALL CONTRACTOR INSTALLED WIRING SHALL CONTRACTOR INSTALLED WIRING SHALL INSTALLED WIRING SHALL INSTALLED WIRING SHALL WIRING SHALL WIRING SHALL SHALL SHALL BE LABELED PER SPECIFICATIONS. 8. ALL WIRING AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE ALL WIRING AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE WIRING AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE WIRING AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE AND SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE SYSTEM CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE CONTROL VOLTAGES SHALL BE IN ACCORDANCE WITH THE VOLTAGES SHALL BE IN ACCORDANCE WITH THE VOLTAGES SHALL BE IN ACCORDANCE WITH THE SHALL BE IN ACCORDANCE WITH THE SHALL BE IN ACCORDANCE WITH THE BE IN ACCORDANCE WITH THE BE IN ACCORDANCE WITH THE IN ACCORDANCE WITH THE IN ACCORDANCE WITH THE ACCORDANCE WITH THE ACCORDANCE WITH THE WITH THE WITH THE THE THE EQUIPMENT MANUFACTURER'S RECOMMENDATION AND THE ELECTRICAL SPECIFICATIONS. 9. VARIABLE FREQUENCY CONTROLLER AND PUMP MOTOR STARTERS, STARTER WIRING, VARIABLE FREQUENCY CONTROLLER AND PUMP MOTOR STARTERS, STARTER WIRING, FREQUENCY CONTROLLER AND PUMP MOTOR STARTERS, STARTER WIRING, FREQUENCY CONTROLLER AND PUMP MOTOR STARTERS, STARTER WIRING, CONTROLLER AND PUMP MOTOR STARTERS, STARTER WIRING, CONTROLLER AND PUMP MOTOR STARTERS, STARTER WIRING, AND PUMP MOTOR STARTERS, STARTER WIRING, AND PUMP MOTOR STARTERS, STARTER WIRING, PUMP MOTOR STARTERS, STARTER WIRING, PUMP MOTOR STARTERS, STARTER WIRING, MOTOR STARTERS, STARTER WIRING, MOTOR STARTERS, STARTER WIRING, STARTERS, STARTER WIRING, STARTERS, STARTER WIRING, STARTER WIRING, STARTER WIRING, WIRING, WIRING, CONTROL VOLTAGE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE VOLTAGE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE VOLTAGE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE TRANSFORMERS AND ASSOCIATED POWER WIRING SHALL BE AND ASSOCIATED POWER WIRING SHALL BE AND ASSOCIATED POWER WIRING SHALL BE ASSOCIATED POWER WIRING SHALL BE ASSOCIATED POWER WIRING SHALL BE POWER WIRING SHALL BE POWER WIRING SHALL BE WIRING SHALL BE WIRING SHALL BE SHALL BE SHALL BE BE BE PROVIDED BY OTHER TRADES. 10. ALL DDC AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS ALL DDC AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS DDC AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS DDC AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS AND CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS CONTROL INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS INTERLOCK WIRING SHALL BE BY TC CONTRACTOR UNLESS WIRING SHALL BE BY TC CONTRACTOR UNLESS WIRING SHALL BE BY TC CONTRACTOR UNLESS SHALL BE BY TC CONTRACTOR UNLESS SHALL BE BY TC CONTRACTOR UNLESS BE BY TC CONTRACTOR UNLESS BE BY TC CONTRACTOR UNLESS BY TC CONTRACTOR UNLESS BY TC CONTRACTOR UNLESS TC CONTRACTOR UNLESS TC CONTRACTOR UNLESS CONTRACTOR UNLESS CONTRACTOR UNLESS UNLESS UNLESS OTHERWISE NOTED. TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR NOTED. TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR NOTED. TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR TC CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR CONTRACTOR SHALL COORDINATE WITH VFC AND MOTOR SHALL COORDINATE WITH VFC AND MOTOR SHALL COORDINATE WITH VFC AND MOTOR COORDINATE WITH VFC AND MOTOR COORDINATE WITH VFC AND MOTOR WITH VFC AND MOTOR WITH VFC AND MOTOR VFC AND MOTOR VFC AND MOTOR AND MOTOR AND MOTOR MOTOR MOTOR STARTER SUPPLIERS TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION SUPPLIERS TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION SUPPLIERS TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION TO DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION DETERMINE EXACT WIRING REQUIREMENTS AND TERMINATION EXACT WIRING REQUIREMENTS AND TERMINATION EXACT WIRING REQUIREMENTS AND TERMINATION WIRING REQUIREMENTS AND TERMINATION WIRING REQUIREMENTS AND TERMINATION REQUIREMENTS AND TERMINATION REQUIREMENTS AND TERMINATION AND TERMINATION AND TERMINATION TERMINATION TERMINATION POINTS. 11. ALL DDC AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE ALL DDC AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE DDC AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE DDC AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE AND CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE CONTROL INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE INTERLOCK WIRING BETWEEN COMPONENTS SHALL BE WIRING BETWEEN COMPONENTS SHALL BE WIRING BETWEEN COMPONENTS SHALL BE BETWEEN COMPONENTS SHALL BE BETWEEN COMPONENTS SHALL BE COMPONENTS SHALL BE COMPONENTS SHALL BE SHALL BE SHALL BE BE BE INSTALLED WITHOUT INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL WITHOUT INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL WITHOUT INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL INTERMEDIATE STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL STOPS. WIRE SPLICING AT INTERMEDIATE TERMINAL WIRE SPLICING AT INTERMEDIATE TERMINAL WIRE SPLICING AT INTERMEDIATE TERMINAL WIRE SPLICING AT INTERMEDIATE TERMINAL SPLICING AT INTERMEDIATE TERMINAL SPLICING AT INTERMEDIATE TERMINAL AT INTERMEDIATE TERMINAL AT INTERMEDIATE TERMINAL INTERMEDIATE TERMINAL INTERMEDIATE TERMINAL TERMINAL TERMINAL STRIPS IS NOT ACCEPTABLE. 12. ALL ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL ALL ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL WIRING AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL AND RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL RACEWAY SYSTEMS SHALL COMPLY WITH ELECTRICAL SYSTEMS SHALL COMPLY WITH ELECTRICAL SYSTEMS SHALL COMPLY WITH ELECTRICAL SHALL COMPLY WITH ELECTRICAL SHALL COMPLY WITH ELECTRICAL COMPLY WITH ELECTRICAL COMPLY WITH ELECTRICAL WITH ELECTRICAL WITH ELECTRICAL ELECTRICAL ELECTRICAL SPECIFICATION REQUIREMENTS. WHERE RACEWAY IS REQUIRED, TWO SEPARATE REQUIREMENTS. WHERE RACEWAY IS REQUIRED, TWO SEPARATE REQUIREMENTS. WHERE RACEWAY IS REQUIRED, TWO SEPARATE WHERE RACEWAY IS REQUIRED, TWO SEPARATE WHERE RACEWAY IS REQUIRED, TWO SEPARATE RACEWAY IS REQUIRED, TWO SEPARATE RACEWAY IS REQUIRED, TWO SEPARATE IS REQUIRED, TWO SEPARATE IS REQUIRED, TWO SEPARATE REQUIRED, TWO SEPARATE REQUIRED, TWO SEPARATE TWO SEPARATE TWO SEPARATE SEPARATE SEPARATE ELECTRICAL RACEWAY SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND RACEWAY SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND RACEWAY SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND SYSTEMS SHALL BE PROVIDED: ONE FOR 120V WIRING AND SHALL BE PROVIDED: ONE FOR 120V WIRING AND SHALL BE PROVIDED: ONE FOR 120V WIRING AND BE PROVIDED: ONE FOR 120V WIRING AND BE PROVIDED: ONE FOR 120V WIRING AND PROVIDED: ONE FOR 120V WIRING AND PROVIDED: ONE FOR 120V WIRING AND ONE FOR 120V WIRING AND ONE FOR 120V WIRING AND ONE FOR 120V WIRING AND FOR 120V WIRING AND FOR 120V WIRING AND 120V WIRING AND 120V WIRING AND WIRING AND WIRING AND AND AND THE OTHER FOR 24V WIRING. 13. TC CONTRACTOR SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC TC CONTRACTOR SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC CONTRACTOR SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC CONTRACTOR SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC SHALL BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC BE RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC RESPONSIBLE FOR ALL POWER SUPPLIES REQUIRED FOR TC FOR ALL POWER SUPPLIES REQUIRED FOR TC FOR ALL POWER SUPPLIES REQUIRED FOR TC ALL POWER SUPPLIES REQUIRED FOR TC ALL POWER SUPPLIES REQUIRED FOR TC POWER SUPPLIES REQUIRED FOR TC POWER SUPPLIES REQUIRED FOR TC SUPPLIES REQUIRED FOR TC SUPPLIES REQUIRED FOR TC REQUIRED FOR TC REQUIRED FOR TC FOR TC FOR TC TC TC SYSTEM UNLESS OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR UNLESS OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR UNLESS OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR OTHERWISE NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR NOTED. REFER TO ELECTRICAL PANEL SCHEDULES FOR REFER TO ELECTRICAL PANEL SCHEDULES FOR REFER TO ELECTRICAL PANEL SCHEDULES FOR REFER TO ELECTRICAL PANEL SCHEDULES FOR TO ELECTRICAL PANEL SCHEDULES FOR TO ELECTRICAL PANEL SCHEDULES FOR ELECTRICAL PANEL SCHEDULES FOR ELECTRICAL PANEL SCHEDULES FOR PANEL SCHEDULES FOR PANEL SCHEDULES FOR SCHEDULES FOR SCHEDULES FOR FOR FOR SPARE CIRCUITS OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE CIRCUITS OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE CIRCUITS OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE OR CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE CIRCUITS DEDICATED TO TEMPERATURE CONTROLS. COORDINATE DEDICATED TO TEMPERATURE CONTROLS. COORDINATE DEDICATED TO TEMPERATURE CONTROLS. COORDINATE TO TEMPERATURE CONTROLS. COORDINATE TO TEMPERATURE CONTROLS. COORDINATE TEMPERATURE CONTROLS. COORDINATE TEMPERATURE CONTROLS. COORDINATE CONTROLS. COORDINATE CONTROLS. COORDINATE COORDINATE COORDINATE COORDINATE CIRCUIT USE WITH ELECTRICAL CONTRACTOR. 14. TC CONTRACTOR SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED TC CONTRACTOR SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED CONTRACTOR SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED CONTRACTOR SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED SHALL VERIFY EXACT LOCATION OF ALL FIELD MOUNTED VERIFY EXACT LOCATION OF ALL FIELD MOUNTED VERIFY EXACT LOCATION OF ALL FIELD MOUNTED EXACT LOCATION OF ALL FIELD MOUNTED EXACT LOCATION OF ALL FIELD MOUNTED LOCATION OF ALL FIELD MOUNTED LOCATION OF ALL FIELD MOUNTED OF ALL FIELD MOUNTED OF ALL FIELD MOUNTED ALL FIELD MOUNTED ALL FIELD MOUNTED FIELD MOUNTED FIELD MOUNTED MOUNTED MOUNTED COMPONENTS. 15. TC CONTRACTOR SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED TC CONTRACTOR SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED CONTRACTOR SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED CONTRACTOR SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED SHALL PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED PROVIDE AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED AUXILIARY PANELS FOR REQUIRED PANEL MOUNTED PANELS FOR REQUIRED PANEL MOUNTED PANELS FOR REQUIRED PANEL MOUNTED FOR REQUIRED PANEL MOUNTED FOR REQUIRED PANEL MOUNTED REQUIRED PANEL MOUNTED REQUIRED PANEL MOUNTED PANEL MOUNTED PANEL MOUNTED MOUNTED MOUNTED EQUIPMENT SUCH AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. SUCH AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. SUCH AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. AS RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. RELAYS, TRANSDUCERS, CONTROL TRANSFORMERS, ETC. TRANSDUCERS, CONTROL TRANSFORMERS, ETC. TRANSDUCERS, CONTROL TRANSFORMERS, ETC. CONTROL TRANSFORMERS, ETC. CONTROL TRANSFORMERS, ETC. TRANSFORMERS, ETC. TRANSFORMERS, ETC. ETC. ETC. AUXILIARY PANELS SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING PANELS SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING PANELS SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING SHALL BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING BE LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING LOCATED NEXT TO ASSOCIATED DDC PANEL. DEPENDING NEXT TO ASSOCIATED DDC PANEL. DEPENDING NEXT TO ASSOCIATED DDC PANEL. DEPENDING TO ASSOCIATED DDC PANEL. DEPENDING TO ASSOCIATED DDC PANEL. DEPENDING ASSOCIATED DDC PANEL. DEPENDING ASSOCIATED DDC PANEL. DEPENDING DDC PANEL. DEPENDING DDC PANEL. DEPENDING PANEL. DEPENDING PANEL. DEPENDING DEPENDING DEPENDING DEPENDING ON WIRE QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING WIRE QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING WIRE QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING QUANTITY OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING OR COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING COMPLEXITY, PROVIDE CONDUITS BETWEEN PANELS OR WIRING PROVIDE CONDUITS BETWEEN PANELS OR WIRING PROVIDE CONDUITS BETWEEN PANELS OR WIRING CONDUITS BETWEEN PANELS OR WIRING CONDUITS BETWEEN PANELS OR WIRING BETWEEN PANELS OR WIRING BETWEEN PANELS OR WIRING PANELS OR WIRING PANELS OR WIRING OR WIRING OR WIRING WIRING WIRING THROUGH WITH CONDUIT STUBS ABOVE ALL ASSOCIATED PANELS. 16. REMOTELY MOUNTED FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., REMOTELY MOUNTED FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., MOUNTED FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., MOUNTED FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., FIELD DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., DEVICES SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., SUCH AS RELAYS, CONTROL TRANSFORMERS, ETC., AS RELAYS, CONTROL TRANSFORMERS, ETC., AS RELAYS, CONTROL TRANSFORMERS, ETC., RELAYS, CONTROL TRANSFORMERS, ETC., RELAYS, CONTROL TRANSFORMERS, ETC., CONTROL TRANSFORMERS, ETC., CONTROL TRANSFORMERS, ETC., TRANSFORMERS, ETC., TRANSFORMERS, ETC., ETC., ETC., SHALL BE HOUSED IN AN ENCLOSURE PROVIDED BY THE TC CONTRACTOR. 17. CONTROL TRANSFORMERS WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL CONTROL TRANSFORMERS WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL TRANSFORMERS WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL TRANSFORMERS WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL WHEN REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL REQUIRED SHALL BE SIZED FOR 150% OF ACTUAL SHALL BE SIZED FOR 150% OF ACTUAL SHALL BE SIZED FOR 150% OF ACTUAL BE SIZED FOR 150% OF ACTUAL BE SIZED FOR 150% OF ACTUAL SIZED FOR 150% OF ACTUAL SIZED FOR 150% OF ACTUAL FOR 150% OF ACTUAL FOR 150% OF ACTUAL 150% OF ACTUAL 150% OF ACTUAL OF ACTUAL OF ACTUAL ACTUAL ACTUAL LOAD. 18. CURRENT SWITCHES USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT CURRENT SWITCHES USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT SWITCHES USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT SWITCHES USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT USED FOR OPERATIONAL STATUS SHALL HAVE CURRENT FOR OPERATIONAL STATUS SHALL HAVE CURRENT FOR OPERATIONAL STATUS SHALL HAVE CURRENT OPERATIONAL STATUS SHALL HAVE CURRENT OPERATIONAL STATUS SHALL HAVE CURRENT STATUS SHALL HAVE CURRENT STATUS SHALL HAVE CURRENT SHALL HAVE CURRENT SHALL HAVE CURRENT HAVE CURRENT HAVE CURRENT CURRENT CURRENT THRESHOLD SETPOINT ADJUSTED TO INDICATE BELT OR DRIVE FAILURE. 19. ALL CONTROL VALVES AND ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC ALL CONTROL VALVES AND ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC CONTROL VALVES AND ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC CONTROL VALVES AND ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC VALVES AND ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC VALVES AND ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC AND ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC AND ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC ASSOCIATED CONTROL ACTUATORS IDENTIFIED ON TC CONTROL ACTUATORS IDENTIFIED ON TC CONTROL ACTUATORS IDENTIFIED ON TC ACTUATORS IDENTIFIED ON TC ACTUATORS IDENTIFIED ON TC IDENTIFIED ON TC IDENTIFIED ON TC ON TC ON TC TC TC DRAWINGS SHALL BE FURNISHED BY TC CONTRACTOR UNLESS OTHERWISE NOTED. SHALL BE FURNISHED BY TC CONTRACTOR UNLESS OTHERWISE NOTED. SHALL BE FURNISHED BY TC CONTRACTOR UNLESS OTHERWISE NOTED. BE FURNISHED BY TC CONTRACTOR UNLESS OTHERWISE NOTED. BE FURNISHED BY TC CONTRACTOR UNLESS OTHERWISE NOTED. FURNISHED BY TC CONTRACTOR UNLESS OTHERWISE NOTED. FURNISHED BY TC CONTRACTOR UNLESS OTHERWISE NOTED. BY TC CONTRACTOR UNLESS OTHERWISE NOTED. BY TC CONTRACTOR UNLESS OTHERWISE NOTED. TC CONTRACTOR UNLESS OTHERWISE NOTED. TC CONTRACTOR UNLESS OTHERWISE NOTED. CONTRACTOR UNLESS OTHERWISE NOTED. CONTRACTOR UNLESS OTHERWISE NOTED. UNLESS OTHERWISE NOTED. UNLESS OTHERWISE NOTED. OTHERWISE NOTED. OTHERWISE NOTED. NOTED. NOTED. DAMPER SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL FLOOR PLAN SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL FLOOR PLAN SIZE AND LOCATIONS ARE INDICATED ON MECHANICAL FLOOR PLAN AND LOCATIONS ARE INDICATED ON MECHANICAL FLOOR PLAN AND LOCATIONS ARE INDICATED ON MECHANICAL FLOOR PLAN LOCATIONS ARE INDICATED ON MECHANICAL FLOOR PLAN LOCATIONS ARE INDICATED ON MECHANICAL FLOOR PLAN ARE INDICATED ON MECHANICAL FLOOR PLAN ARE INDICATED ON MECHANICAL FLOOR PLAN INDICATED ON MECHANICAL FLOOR PLAN INDICATED ON MECHANICAL FLOOR PLAN ON MECHANICAL FLOOR PLAN ON MECHANICAL FLOOR PLAN MECHANICAL FLOOR PLAN MECHANICAL FLOOR PLAN FLOOR PLAN FLOOR PLAN PLAN PLAN DRAWINGS. 20. ALL CONTROL VALVES FURNISHED BY THE TC CONTRACTOR SHALL BE INSTALLED BY ALL CONTROL VALVES FURNISHED BY THE TC CONTRACTOR SHALL BE INSTALLED BY CONTROL VALVES FURNISHED BY THE TC CONTRACTOR SHALL BE INSTALLED BY CONTROL VALVES FURNISHED BY THE TC CONTRACTOR SHALL BE INSTALLED BY VALVES FURNISHED BY THE TC CONTRACTOR SHALL BE INSTALLED BY VALVES FURNISHED BY THE TC CONTRACTOR SHALL BE INSTALLED BY FURNISHED BY THE TC CONTRACTOR SHALL BE INSTALLED BY FURNISHED BY THE TC CONTRACTOR SHALL BE INSTALLED BY BY THE TC CONTRACTOR SHALL BE INSTALLED BY BY THE TC CONTRACTOR SHALL BE INSTALLED BY THE TC CONTRACTOR SHALL BE INSTALLED BY THE TC CONTRACTOR SHALL BE INSTALLED BY TC CONTRACTOR SHALL BE INSTALLED BY TC CONTRACTOR SHALL BE INSTALLED BY CONTRACTOR SHALL BE INSTALLED BY CONTRACTOR SHALL BE INSTALLED BY SHALL BE INSTALLED BY SHALL BE INSTALLED BY BE INSTALLED BY BE INSTALLED BY INSTALLED BY INSTALLED BY BY BY THE MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC FITTINGS MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC FITTINGS MECHANICAL CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC FITTINGS CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC FITTINGS CONTRACTOR. ALL PIPE PENETRATIONS AND BASIC FITTINGS ALL PIPE PENETRATIONS AND BASIC FITTINGS ALL PIPE PENETRATIONS AND BASIC FITTINGS ALL PIPE PENETRATIONS AND BASIC FITTINGS PIPE PENETRATIONS AND BASIC FITTINGS PIPE PENETRATIONS AND BASIC FITTINGS PENETRATIONS AND BASIC FITTINGS PENETRATIONS AND BASIC FITTINGS AND BASIC FITTINGS AND BASIC FITTINGS BASIC FITTINGS BASIC FITTINGS FITTINGS FITTINGS REQUIRED FOR SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL FOR SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL FOR SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL SENSOR INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL INSTALLATIONS SHALL BE PROVIDED BY MECHANICAL SHALL BE PROVIDED BY MECHANICAL SHALL BE PROVIDED BY MECHANICAL BE PROVIDED BY MECHANICAL BE PROVIDED BY MECHANICAL PROVIDED BY MECHANICAL PROVIDED BY MECHANICAL BY MECHANICAL BY MECHANICAL MECHANICAL MECHANICAL CONTRACTOR. 21. ALL INSTRUMENTATION TUBING REQUIRED FOR DPS AND DPT COMPONENT ALL INSTRUMENTATION TUBING REQUIRED FOR DPS AND DPT COMPONENT INSTRUMENTATION TUBING REQUIRED FOR DPS AND DPT COMPONENT INSTRUMENTATION TUBING REQUIRED FOR DPS AND DPT COMPONENT TUBING REQUIRED FOR DPS AND DPT COMPONENT TUBING REQUIRED FOR DPS AND DPT COMPONENT REQUIRED FOR DPS AND DPT COMPONENT REQUIRED FOR DPS AND DPT COMPONENT FOR DPS AND DPT COMPONENT FOR DPS AND DPT COMPONENT DPS AND DPT COMPONENT DPS AND DPT COMPONENT AND DPT COMPONENT AND DPT COMPONENT DPT COMPONENT DPT COMPONENT COMPONENT COMPONENT INSTALLATIONS SHALL BE PROVIDED BY TC CONTRACTOR. 22. TC CONTRACTOR SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED TC CONTRACTOR SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED CONTRACTOR SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED CONTRACTOR SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED SHALL FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED FIELD MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED MOUNT ALL REQUIRED "SHIPPED LOOSE" PACKAGED ALL REQUIRED "SHIPPED LOOSE" PACKAGED ALL REQUIRED "SHIPPED LOOSE" PACKAGED REQUIRED "SHIPPED LOOSE" PACKAGED REQUIRED "SHIPPED LOOSE" PACKAGED "SHIPPED LOOSE" PACKAGED "SHIPPED LOOSE" PACKAGED LOOSE" PACKAGED LOOSE" PACKAGED PACKAGED PACKAGED CONTROL COMPONENTS FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL COMPONENTS FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL COMPONENTS FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL FURNISHED BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL BY EQUIPMENT SUPPLIERS WHERE INDICATED. ALL EQUIPMENT SUPPLIERS WHERE INDICATED. ALL EQUIPMENT SUPPLIERS WHERE INDICATED. ALL SUPPLIERS WHERE INDICATED. ALL SUPPLIERS WHERE INDICATED. ALL WHERE INDICATED. ALL WHERE INDICATED. ALL INDICATED. ALL INDICATED. ALL ALL ALL ALL REQUIRED 24V AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR 24V AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR 24V AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR AND 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR 120V FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR FIELD WIRING SHALL BE PROVIDED BY TC CONTRACTOR WIRING SHALL BE PROVIDED BY TC CONTRACTOR WIRING SHALL BE PROVIDED BY TC CONTRACTOR SHALL BE PROVIDED BY TC CONTRACTOR SHALL BE PROVIDED BY TC CONTRACTOR BE PROVIDED BY TC CONTRACTOR BE PROVIDED BY TC CONTRACTOR PROVIDED BY TC CONTRACTOR PROVIDED BY TC CONTRACTOR BY TC CONTRACTOR BY TC CONTRACTOR TC CONTRACTOR TC CONTRACTOR CONTRACTOR CONTRACTOR UNLESS NOTED OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM NOTED OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM NOTED OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM OTHERWISE. TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM TC CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM CONTRACTOR SHALL COORDINATE SPECIFIC SYSTEM SHALL COORDINATE SPECIFIC SYSTEM SHALL COORDINATE SPECIFIC SYSTEM COORDINATE SPECIFIC SYSTEM COORDINATE SPECIFIC SYSTEM SPECIFIC SYSTEM SPECIFIC SYSTEM SYSTEM SYSTEM WIRING REQUIREMENTS WITH PACKAGED EQUIPMENT SUPPLIERS.

AutoCAD SHX Text

TC GENERAL NOTES

AutoCAD SHX Text

VARIABLE FREQUENCY CONTROLLER

AutoCAD SHX Text

VELOCITY SENSOR

AutoCAD SHX Text

VIBRATION SWITCH

AutoCAD SHX Text

VIB

AutoCAD SHX Text

VFC

AutoCAD SHX Text

(AS DEFINED ON TC DRAWINGS)

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

VALVE - 3 WAY CONTROL VALVE

AutoCAD SHX Text

VALVE - 2 WAY CONTROL VALVE

AutoCAD SHX Text

THERMOSTAT OR TEMPERATURE SENSOR

AutoCAD SHX Text

TEMP SENSOR - DUCT MOUNTED AVG ELEMENT

AutoCAD SHX Text

TEMP SENSOR - DUCT MOUNTED RIGID ELEMENT

AutoCAD SHX Text

TEMPERATURE SENSOR - STRAP ON BULB

AutoCAD SHX Text

START/STOP RELAY

AutoCAD SHX Text

STATIC PRESSURE TRANSMITTER

AutoCAD SHX Text

STATIC PRESSURE SENSOR OR PROBE

AutoCAD SHX Text

SWITCH

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text

SPT

AutoCAD SHX Text

AutoCAD SHX Text S/S

AutoCAD SHX Text

SMOKE DETECTOR - DUCT MOUNTED

AutoCAD SHX Text

RELAY, ELECTRIC

AutoCAD SHX Text

PRESSURE TRANSMITTER

AutoCAD SHX Text

SIGNAL - PACKAGED EQUIPMENT, DIGITAL OUTPUT

AutoCAD SHX Text

SIGNAL - PACKAGED EQUIPMENT, DIGITAL INPUT

AutoCAD SHX Text

SIGNAL - PACKAGED EQUIPMENT, ANALOG OUTPUT

AutoCAD SHX Text

SIGNAL - PACKAGED EQUIPMENT, ANALOG INPUT

AutoCAD SHX Text

SIGNAL - DDC/BAS, ANALOG INPUT

AutoCAD SHX Text

SIGNAL - DDC/BAS, ANALOG OUTPUT

AutoCAD SHX Text

SIGNAL - DDC/BAS, DIGITAL INPUT

AutoCAD SHX Text

SIGNAL - DDC/BAS, DIGITAL OUTPUT

AutoCAD SHX Text

SELECTOR SWITCH, (N=NUMBER OF POSITIONS)

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text R

AutoCAD SHX Text

THERMAL OVERLOAD, SINGLE PHASE

AutoCAD SHX Text

THERMAL OVERLOAD CONTACTS-3 PHASE

AutoCAD SHX Text

NORMALLY CLOSED

AutoCAD SHX Text

WIRING NOT CONNECTED

AutoCAD SHX Text

WIRE TO WIRE TERMINATION

AutoCAD SHX Text

WIRE TERMINATION AT DEVICE

AutoCAD SHX Text

AutoCAD SHX Text %%uABBREVIATION

AutoCAD SHX Text

%%UABBREVIATIONS

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text OLs

AutoCAD SHX Text

SWITCH - TEMPERATURE ACTUATED, NO

AutoCAD SHX Text

SWITCH - PRESSURE & VACUUM, NC

AutoCAD SHX Text

OCCUPANCY SENSOR

AutoCAD SHX Text

LIMIT SWITCH

AutoCAD SHX Text

LINE - INSTRUMENT AIR (PNEUMATIC)

AutoCAD SHX Text

LINE - ELECTRIC

AutoCAD SHX Text

LEVEL SWITCH OR TRANSMITTER

AutoCAD SHX Text

HUMIDITY SENSOR, DUCT MOUNTED

AutoCAD SHX Text

(AS DEFINED ON TC DRAWINGS)

AutoCAD SHX Text

HUMIDIFIER

AutoCAD SHX Text

HUMIDISTAT OR HUMIDITY SENSOR

AutoCAD SHX Text

MOTOR STARTER

AutoCAD SHX Text

GUARD FOR STAT OR SENSOR

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text M

AutoCAD SHX Text

LVL

AutoCAD SHX Text H

AutoCAD SHX Text

DAMPER - PARALLEL BLADE

AutoCAD SHX Text

DAMPER MOTOR

AutoCAD SHX Text

DIFFERENTIAL PRESSURE TRANSMITTER

AutoCAD SHX Text

DIFFERENTIAL PRESSURE SWITCH

AutoCAD SHX Text

FIRE ALARM SYSTEM, ADDRESSABLE CONTROL MODULE

AutoCAD SHX Text

FLOW METER

AutoCAD SHX Text

FLOW SWITCH

AutoCAD SHX Text

FREEZESTAT

AutoCAD SHX Text

DPS

AutoCAD SHX Text

DPT

AutoCAD SHX Text M

AutoCAD SHX Text

CARBON DIOXIDE SENSOR - DUCT MOUNTED

AutoCAD SHX Text

CARBON DIOXIDE SENSOR - WALL MOUNTED

AutoCAD SHX Text

DAMPER - OPPOSED BLADE

AutoCAD SHX Text

CURRENT TRANSDUCER

AutoCAD SHX Text

AQUASTAT, STRAP ON BULB

AutoCAD SHX Text

CURRENT SWITCH

AutoCAD SHX Text

CO2

AutoCAD SHX Text

CO2

AutoCAD SHX Text %%uSCHEMATIC SYMBOLS

AutoCAD SHX Text

HAND/OFF/AUTO

AutoCAD SHX Text

SWITCH - 3 POSITION SELECTOR

AutoCAD SHX Text

SWITCH - LIMIT, NO

AutoCAD SHX Text

SWITCH - FLOW (AIR, WATER, ETC.), NO

AutoCAD SHX Text

PUSH BUTTON - MOMENTARY, NC (MUSHROOM HEAD)

AutoCAD SHX Text H

AutoCAD SHX Text O

AutoCAD SHX Text A

AutoCAD SHX Text

MOTOR, SINGLE PHASE

AutoCAD SHX Text

GROUND

AutoCAD SHX Text

CONTACT - INSTANT OPERATING, NO

AutoCAD SHX Text

CONTACT - INSTANT OPERATING, NC

AutoCAD SHX Text

COIL - MOTOR STARTER CONTACTOR

AutoCAD SHX Text

COIL - RELAY

AutoCAD SHX Text R

AutoCAD SHX Text M/S

AutoCAD SHX Text %%uSCHEMATIC SYMBOLS (CONT.)

AutoCAD SHX Text

%%UWIRING SYMBOLS

AutoCAD SHX Text

BUILDING AUTOMATION SYSTEM

AutoCAD SHX Text

DIRECT DIGITAL CONTROL

AutoCAD SHX Text

DDC

AutoCAD SHX Text

BAS

AutoCAD SHX Text

TIMER SWITCH

AutoCAD SHX Text

TMR

AutoCAD SHX Text %%uSYMBOL

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text %%uSYMBOL

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text

TEMPERATURE SENSOR - RIGID ELEMENT IN WELL

AutoCAD SHX Text

NORMALLY OPEN

AutoCAD SHX Text

TEMPERATURE CONTROLS

AutoCAD SHX Text

TEMPERATURE CONTROL - SYMBOLS LIST

AutoCAD SHX Text NOTES: 1. SOME SYMBOLS & ABBREVIATIONS SHOWN MAY NOT APPLY TO THIS PROJECT. SOME SYMBOLS & ABBREVIATIONS SHOWN MAY NOT APPLY TO THIS PROJECT. 2. REFER TO MECHANICAL STANDARDS ON DRAWING M0.1 FOR ADDITIONAL SYMBOLS & ABBREVIATIONS THAT MAY BE USED ON TEMPERATURE CONTROL DRAWINGS.REFER TO MECHANICAL STANDARDS ON DRAWING M0.1 FOR ADDITIONAL SYMBOLS & ABBREVIATIONS THAT MAY BE USED ON TEMPERATURE CONTROL DRAWINGS.

AutoCAD SHX Text

ON/OFF ACTIVE COMMAND STATUS

AutoCAD SHX Text

ON/OFF RUN STATUS

AutoCAD SHX Text CURRENT OPERATING FREQUENCY (Hz)

AutoCAD SHX Text

MOTOR AMPS

AutoCAD SHX Text

MOTOR TORQUE

AutoCAD SHX Text

COMMON ALARM STATUS

AutoCAD SHX Text

CURRENT SPEED COMMAND (O-100%%%)

AutoCAD SHX Text

RUNTIME HOURS

AutoCAD SHX Text

REMOTE VFC (ALARM) RESET

AutoCAD SHX Text

MOTOR VOLTAGE

AutoCAD SHX Text

RUNTIME HOURS RESET

AutoCAD SHX Text

POWER (KW)

AutoCAD SHX Text

ACCUMULATED KWH

AutoCAD SHX Text NOTE: TC CONTRACTOR SHALL COORDINATE BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION CONTRACTOR SHALL COORDINATE BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION CONTRACTOR SHALL COORDINATE BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION SHALL COORDINATE BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION SHALL COORDINATE BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION COORDINATE BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION COORDINATE BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION BACnet-MS/TP OPEN PROTOCOL WIRE TERMINATION OPEN PROTOCOL WIRE TERMINATION OPEN PROTOCOL WIRE TERMINATION PROTOCOL WIRE TERMINATION PROTOCOL WIRE TERMINATION WIRE TERMINATION WIRE TERMINATION TERMINATION TERMINATION REQUIREMENTS AND POINT INTEGRATION CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER AND POINT INTEGRATION CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER AND POINT INTEGRATION CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER POINT INTEGRATION CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER POINT INTEGRATION CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER INTEGRATION CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER INTEGRATION CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER CAPABILITIES WITH VFC SUPPLIER/MANUFACTURER WITH VFC SUPPLIER/MANUFACTURER WITH VFC SUPPLIER/MANUFACTURER VFC SUPPLIER/MANUFACTURER VFC SUPPLIER/MANUFACTURER SUPPLIER/MANUFACTURER SUPPLIER/MANUFACTURER AND PROVIDE APPROPRIATE BAS COMPONENTS FOR COMMUNICATION INTERFACE TO BAS.

AutoCAD SHX Text VFC BACnet INTERFACE & MONITORING REQUIREMENTS

AutoCAD SHX Text TYPICAL FOR PUMP VFCs

AutoCAD SHX Text BACnet-MS/TP OPEN PROTOCOL INTERFACE TO BAS COMMUNICATING BUT NOT LIMITED TO THE FOLLOWING POINT DATA AS AVAILABLE:

AutoCAD SHX Text

MOTOR THERMAL (0-100%%%)

AutoCAD SHX Text

INVERTER THERMAL (0-100%%%)

AutoCAD SHX Text

DC LINK VOLTAGE

AutoCAD SHX Text

ACCUMULATED KWH RESET

AutoCAD SHX Text

HEAT SINK TEMPERATURE

AutoCAD SHX Text

VARIABLE FREQUENCY CONTROLLER

AutoCAD SHX Text

CURRENT SWITCH INSTALLATION DETAILS

AutoCAD SHX Text TYPICAL NOTES: 1. CURRENT SWITCH (CS) OR CURRENT TRANSDUCER (CT) AMP MONITORING AS CURRENT SWITCH (CS) OR CURRENT TRANSDUCER (CT) AMP MONITORING AS SWITCH (CS) OR CURRENT TRANSDUCER (CT) AMP MONITORING AS SWITCH (CS) OR CURRENT TRANSDUCER (CT) AMP MONITORING AS (CS) OR CURRENT TRANSDUCER (CT) AMP MONITORING AS (CS) OR CURRENT TRANSDUCER (CT) AMP MONITORING AS OR CURRENT TRANSDUCER (CT) AMP MONITORING AS OR CURRENT TRANSDUCER (CT) AMP MONITORING AS CURRENT TRANSDUCER (CT) AMP MONITORING AS CURRENT TRANSDUCER (CT) AMP MONITORING AS TRANSDUCER (CT) AMP MONITORING AS TRANSDUCER (CT) AMP MONITORING AS (CT) AMP MONITORING AS (CT) AMP MONITORING AS AMP MONITORING AS AMP MONITORING AS MONITORING AS MONITORING AS AS AS APPLICABLE PER CONTROL DETAILS SHALL BE INSTALLED FOR DDC SYSTEM STATUS PER CONTROL DETAILS SHALL BE INSTALLED FOR DDC SYSTEM STATUS PER CONTROL DETAILS SHALL BE INSTALLED FOR DDC SYSTEM STATUS CONTROL DETAILS SHALL BE INSTALLED FOR DDC SYSTEM STATUS CONTROL DETAILS SHALL BE INSTALLED FOR DDC SYSTEM STATUS DETAILS SHALL BE INSTALLED FOR DDC SYSTEM STATUS DETAILS SHALL BE INSTALLED FOR DDC SYSTEM STATUS SHALL BE INSTALLED FOR DDC SYSTEM STATUS SHALL BE INSTALLED FOR DDC SYSTEM STATUS BE INSTALLED FOR DDC SYSTEM STATUS BE INSTALLED FOR DDC SYSTEM STATUS INSTALLED FOR DDC SYSTEM STATUS INSTALLED FOR DDC SYSTEM STATUS FOR DDC SYSTEM STATUS FOR DDC SYSTEM STATUS DDC SYSTEM STATUS DDC SYSTEM STATUS SYSTEM STATUS SYSTEM STATUS STATUS STATUS INDICATION OF FAN OR PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS OF FAN OR PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS OF FAN OR PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS FAN OR PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS FAN OR PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS OR PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS OR PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS PUMP OPERATION. APPROPRIATE TIME DELAY FOR STATUS OPERATION. APPROPRIATE TIME DELAY FOR STATUS OPERATION. APPROPRIATE TIME DELAY FOR STATUS APPROPRIATE TIME DELAY FOR STATUS APPROPRIATE TIME DELAY FOR STATUS APPROPRIATE TIME DELAY FOR STATUS TIME DELAY FOR STATUS TIME DELAY FOR STATUS DELAY FOR STATUS DELAY FOR STATUS FOR STATUS FOR STATUS STATUS STATUS FEEDBACK UPON DDC START AND STOP COMMANDS SHALL BE INCLUDED WITH THE UPON DDC START AND STOP COMMANDS SHALL BE INCLUDED WITH THE UPON DDC START AND STOP COMMANDS SHALL BE INCLUDED WITH THE DDC START AND STOP COMMANDS SHALL BE INCLUDED WITH THE DDC START AND STOP COMMANDS SHALL BE INCLUDED WITH THE START AND STOP COMMANDS SHALL BE INCLUDED WITH THE START AND STOP COMMANDS SHALL BE INCLUDED WITH THE AND STOP COMMANDS SHALL BE INCLUDED WITH THE AND STOP COMMANDS SHALL BE INCLUDED WITH THE STOP COMMANDS SHALL BE INCLUDED WITH THE STOP COMMANDS SHALL BE INCLUDED WITH THE COMMANDS SHALL BE INCLUDED WITH THE COMMANDS SHALL BE INCLUDED WITH THE SHALL BE INCLUDED WITH THE SHALL BE INCLUDED WITH THE BE INCLUDED WITH THE BE INCLUDED WITH THE INCLUDED WITH THE INCLUDED WITH THE WITH THE WITH THE THE THE DDC LOGIC TO AVOID NUISANCE OPERATIONAL ALARMS. 2.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated May 18, 2026.