Exhibit_B_-_TVM_Inventory_&_Status_Matrix.xlsx

XLSX spreadsheet 106 KB Posted

Attached to
Ticket Vending Machine (TVM) Replacements (5% SBE Goal)
Solicitation number
RFP 126FO005
Issued by
Denver County, Denver City, Colorado

About this file

Exhibit B: TVM Inventory and Status Matrix Summary

This document is a comprehensive inventory and status matrix for ticket vending machine (TVM) replacements across the Regional Transportation District (RTD) service area in Denver, Colorado. The matrix details 173 total TVMs across multiple transit lines including the Link Light Rail, US-36 Bus Rapid Transit (BRT), Commuter Rail (CRT), and Gold Line services. The inventory encompasses 113 TVMs at existing locations, 54 TVMs along the East Colfax BRT corridor, and 6 spare units. Each TVM entry provides specific technical specifications including existing machine type (Full Service, CC only, or R-Full Service), corridor location, station name, latitude/longitude coordinates, circuit number, breaker amperage (20A or 30A), breaker location, power and communications infrastructure details, and installation scenario codes. The document indicates whether each machine requires removal only, replacement with a new unit, or new installation, with corresponding installation measures and special notes. Of the 173 new TVMs, 185 existing machines are scheduled for removal and disposal as part of RTD's modernization initiative.

The status matrix provides detailed site-specific installation guidance organized by TVM number and location, with particular attention to power and communication routing, existing infrastructure compatibility, and potential infrastructure conflicts such as NEC violations, hydronic heating systems, or ground-level utility considerations. Several entries note open items where circuit breakers could not be verified during surveys or where decommissioned units require special handling. The installation scenarios reference specific technical standards and RTD drawings, indicating a phased or categorized approach to the replacement project. Notable location types include street-level installations, parking lot installations, and facility-specific placements such as mechanical rooms and driver relief stations. The document serves as a detailed technical reference for contractors managing the scope, sequencing, and site-specific requirements for the comprehensive TVM replacement program across RTD's transit network.

View the file

Other files

File Type Posted
Ticket_Vending_Machine_(TVM)_Replacements_(5%_SBE_Goal)_(Addendum_#5_Revision).pdf PDF
Ticket_Vending_Machine_(TVM)_Replacements_(5%_SBE_Goal)_(Addendum_#4_Revision).pdf PDF
126FO005_-_TVM_Replacement_-_Form_of_the_Contract.pdf PDF
TVM_Replacement_SOW.docx DOCX document
Exhibit_I_-_TVM_-_Advanced_Shipping_Notice.xlsx XLSX spreadsheet
Exhibit_F_Engineering_Technical_Specs_for_Installation.docx DOCX document
Exhibit_A_-_RTD_System_Map.pdf PDF
Goal_Determination_Letter_TVM_Replacement_Re-Evaluation_3..23.26_IFB.pdf PDF
TVM_Vendor_list.xlsx XLSX spreadsheet
Exhibit_E_-_Colfax_BRT_Reference_Plans.pdf PDF
Ticket_Vending_Machine_Working_ICE_3-7-26.xlsx XLSX spreadsheet
Exhibit_C_-_TVM_Data_Sheets.pdf PDF
Exhibit_G_-_RTD_Equipment_Case_Requirements.pdf PDF
Exhibit_D_-_TVM_Replacement_-_Standard_Details.pdf PDF
Exhibit_H_-_Grounding_and_Bonding_and_Surge_Protection_Requirements.pdf PDF
Exhibit_J_-_TVM_Requirements_Compliance_Matrix.xlsx XLSX spreadsheet
List_of_Certified_Firms_-_TVM_Replacement_3.23.26.xlsx XLSX spreadsheet
Procurement_Initiation_Form_-TVM_Version_1.2.docx DOCX document
TAG_Review_-_PCRA_TVM_Replacement_v1[1]_(2).docx DOCX document
Title_VI_TVM_Assessment_Memo_-_26_FEB_2025[1]_(2).pdf PDF
Updated_PR_Memo_-_TVM_2025-02_11[1]_(2).pdf PDF
liquidated_damages_memo-TVM_(1).docx DOCX document
Show all 22

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Sheet1

Currently Installed TVMs
Location113
TVM #Exist. TypeCorridorStationAs-BuiltsCRT/LRT/BRTLatLongGoogle MapsTVM AccessRemove, Replace, New InstallCircuit NumberBreaker Amperage (A)Breaker LocationDedicated Power?Dedicated COM?Comm TypeSwitch in TVM?Switch in Adj. TVM #Switch LocationScenariosVariationsSpecific Installation MeasuresApplicable Standard DetailsNotes/CommentsGoogle Map
11R-Full ServiceMAC30th & DowningLinkLRT39°45′32″ N104°58′25″ WMAPReplace1920PCC on PlatformSharedSharedEthernetNoPCCC2Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove pavers/concrete below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 011 to E-Tel and SMV. Place new concrete where pavers/concrete removed per RTD Standard Drawings . Re-install E-Tel and SMV. Re-connect E-Tel and SMV.5,3https://www.google.com/maps/search/?api=1&query=39°45′32″ N,104°58′25″ WMAP
12Full ServiceMAC30th & DowningLinkLRT39°45′31″ N104°58′24″ WMAPRemove230PCC on PlatformDedicatedDedicatedEthernetNoPCCDRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°45′31″ N,104°58′24″ WMAP
31Full ServiceMAC27th & WeltonLinkLRT39°45′19″ N104°58′39″ WMAPReplace520PCC on PlatformSharedSharedEthernetNoPCCB2VRemove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors. Currently the comm and power share the same conduit. RTD desired to have separate power and comm conduits to the fare collection devices which would have to run from a manhole in the tracks to a new handhole near the TVM. Coordinate with RTD for final design in this location.1,3NEC Violation.https://www.google.com/maps/search/?api=1&query=39°45′19″ N,104°58′39″ WMAP
41Full ServiceMAC25th & WeltonLinkLRT39°45′12″ N104°58′48″ WMAPReplace2220PCC on PlatformSharedSharedEthernetNoPCCC2Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove pavers/concrete below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 041 to SMV and E-Tel. Place new concrete where pavers/concrete removed per RTD Standard Drawings. Re-install SMV and E-Tel. Re-connect SMV and E-Tel .5,3https://www.google.com/maps/search/?api=1&query=39°45′12″ N,104°58′48″ WMAP
51Full ServiceMAC20th & WeltonLinkLRT39°44′52″ N104°59′14″ WMAPReplace530PCC on PlatformSharedSharedEthernetNoPCCC2Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove pavers/concrete below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 051 to SMV and E-Tel. Place new concrete where pavers/concrete removed per RTD Standard Drawings. Re-install E-Tel and SMV. Re-connect E-Tel and .5,3https://www.google.com/maps/search/?api=1&query=39°44′52″ N,104°59′14″ WMAP
61Full ServiceCentral18th & CaliforniaLinkLRT39°44′42″ N104°57′33″ WMAPStreet LevelReplace720PCC on PlatformSharedSharedEthernetNoPCCC1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove pavers/concrete below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 061 to SMV and E-Tel. Place new concrete where pavers/concrete removed per RTD Standard Drawings. Re-install SMV and E-Tel. Re-connect SMV and E-Tel .5,3https://www.google.com/maps/search/?api=1&query=39°44′42″ N,104°57′33″ WMAP
71Full ServiceCentral16th & CaliforniaLinkLRT39°44′48″ N104°59′24″ WMAPStreet LevelReplace130PCC on PlatformSharedSharedEthernetNoPCCC1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove pavers/concrete below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 071 to SMV and E-Tel. Place new concrete where pavers/concrete removed per RTD Standard Drawings. Re-install SMV and E-Tel. Re-connect SMV and E-Tel.5,3https://www.google.com/maps/search/?api=1&query=39°44′48″ N,104°59′24″ WMAP
91Full ServiceCentralConvention CenterLinkLRT39° 44' 38" N104° 59' 50" WMAPStreet LevelRemoveUNKNOWNUNKNOWNUNKNOWNUNKNOWNDedicatedEthernetNoUNKNOWNDRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3Open item, breakers could not be foundhttps://www.google.com/maps/search/?api=1&query=39° 44' 38" N,104° 59' 50" WMAP
92R-CC onlyCentralConvention CenterLinkLRT39° 44' 38" N104° 59' 50" WMAPStreet LevelReplaceUNKNOWNUNKNOWNUNKNOWNUNKNOWNSharedEthernetNoUNKNOWNUNKNOWNUNKNOWNRemove old TVM and replace with new unit. Make power and comm connections to new unit. Remove concrete in full panels (joint to joint) below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 092 to SMV and E-Tel. Replace concrete panels where removed per RTD Standard Drawings. Re-install SMV and E-Tel. Re-connect SMV and E-Tel.5,3Decommissioned, Open item, breakers could not be foundhttps://www.google.com/maps/search/?api=1&query=39° 44' 38" N,104° 59' 50" WMAP
101Full ServiceCentral16th & StoutLinkLRT39° 44' 45" N104° 59' 34" WMAPStreet LevelReplace730PCC on PlatformDedicatedSharedEthernetNoPCCC1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove pavers/concrete below TVM and E-Tel. Re-route power and comm conduit below grade from TVM 101 to E-Tel. Place new concrete where pavers/concrete removed per RTD Standard Drawings. Re-install E-Tel. Re-connect E-Tel.5,3https://www.google.com/maps/search/?api=1&query=39° 44' 45" N,104° 59' 34" WMAP
102Full ServiceCentral16th & StoutLinkLRT39° 44' 46" N104° 59' 34" WMAPStreet LevelReplace1520PCC on PlatformDedicatedSharedEthernetNoPCCC1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove pavers/concrete below TVM, SMV and SAV. Re-route power and comm conduit below grade from TVM 102 to SMV and SAV. Place new concrete where pavers/concrete removed per RTD Standard Drawings. Re-install SMV and SAV. Re-connect SMV and SAV.5,3https://www.google.com/maps/search/?api=1&query=39° 44' 46" N,104° 59' 34" WMAP
111Full ServiceCentral18th & StoutLinkLRT39° 44' 52" N104° 59' 26" WMAPStreet LevelReplace530PCC on PlatformSharedSharedEthernetNoPCCC1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove pavers/concrete below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 111 to SMV and E-Tel. Relocated SAV adjacent to SMV to new location between TVM and canopy column. Re-route power conduit below grade to new SAV location. Place new concrete where pavers/concrete removed per RTD Standard Drawings. Re-install SMV, E-Tel, and SAV. Re-connect SMV, E-Tel, and SAV.5,3https://www.google.com/maps/search/?api=1&query=39° 44' 52" N,104° 59' 26" WMAP
121Full ServiceCentralColfax @ AurariaLinkLRT39° 44' 25" N105° 0' 7" WMAPStreet LevelReplace830PCC on PlatformSharedSharedFiberYes--C1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove concrete below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 121 to SMV and E-Tel. Replace concrete where removed per RTD Standard Drawings. Re-install SMV and E-Tel. Re-connect SMV and E-Tel.5,3https://www.google.com/maps/search/?api=1&query=39° 44' 25" N,105° 0' 7" WMAP
122Full ServiceCentralColfax @ AurariaLinkLRT39° 44' 25" N105° 0' 7" WMAPStreet LevelReplace530PCC on PlatformSharedSharedEthernetNo121--C1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove concrete below TVM, SMV and E-Tel. Re-route power and comm conduit below grade from TVM 122 to SMV and E-Tel. Replace concrete where removed per RTD Standard Drawings. Re-install SMV and E-Tel. Re-connect SMV and E-Tel.5,3https://www.google.com/maps/search/?api=1&query=39° 44' 25" N,105° 0' 7" WMAP
131Full ServiceCentral10th & OsageLinkLRT39°43'56" N105°0'20" WMAPStreet LevelReplace1420PCC on PlatformSharedSharedFiberYes--C1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove concrete panels under TVM, SMV and E-Tel. Remove full concrete panels (from joint to joint). Re-route power and comm conduit below grade from TVM 131 to SMV and E-Tel. Replace concrete panels per RTD Standard Drawings and re-install SMV and E-Tel. Re-connect power and comm to SMV and E-Tel.5,3https://www.google.com/maps/search/?api=1&query=39°43'56" N,105°0'20" WMAP
132R-CC onlyCentral10th & OsageLinkLRT39°43'56" N105°0'20" WMAPStreet LevelRemove1620PCC on PlatformUNKOWNSharedEthernetNo132--DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3Decommissioned, could not verify power connection.https://www.google.com/maps/search/?api=1&query=39°43'56" N,105°0'20" WMAP
141Full ServiceCentralAlamedaLinkLRT39°42'31" N104°59'34" WMAPStreet LevelRemove1920Electrical RoomSharedSharedEthernetNoComms RoomDRemove TVM. Remove old anchors. Install new handhole at TVM location. Re-route power and comm conduits below grade to E-Tel from new handhole. Replace removed concrete. Re-install and re-connect E-Tel.1,2,3,4https://www.google.com/maps/search/?api=1&query=39°42'31" N,104°59'34" WMAP
142CC onlyCentralAlamedaLinkLRT39°42'31" N104°59'34" WMAPStreet LevelReplace2120Electrical RoomSharedSharedEthernetNoComms RoomC2Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 142 to SMV. Re-install and re-connect SMV.1,2,3https://www.google.com/maps/search/?api=1&query=39°42'31" N,104°59'34" WMAP
151Full ServiceCentralI-25 & BroadwayLinkLRT39°42'7" N104°59'24" WMAPStreet LevelReplace1020PCC in Parking LotSharedSharedFiberYesC1Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 151 to SMV and E-Tel. Re-install SMV and E-Tel. Re-connect SMV and E-Tel.1,2,3https://www.google.com/maps/search/?api=1&query=39°42'7" N,104°59'24" WMAP
152Full ServiceCentralI-25 & BroadwayLinkLRT39°42'6" N104°59'24" WMAPStreet LevelRemove1420PCC in Parking LotSharedSharedFiberYesDRemove TVM. Remove old anchors. Install new handhole at TVM location. Re-route power and comm conduits below grade from new handhole to adjacent SMVs. Replace concrete where removed. Re-install SMVs. Re-connect SMVs.1,2,3,4https://www.google.com/maps/search/?api=1&query=39°42'6" N,104°59'24" WMAP
153CC onlyCentralI-25 & BroadwayLinkLRT39°42'5" N104°59'23" WMAPStreet LevelReplace2220PCC in Parking LotSharedSharedFiberYesC1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove concrete pad under TVM. Re-route power and comm conduits below grade from TVM 153 to SMV and E-Tel. Re-route all conduit coming into sides of existing TVM to enter into bottom of new TVM. Re-install all devices. Re-connect all devices.1,2,3,4,5https://www.google.com/maps/search/?api=1&query=39°42'5" N,104°59'23" WMAP
161Full ServiceSWCEvansLinkLRT39° 40' 41" N104° 59' 33" WMAPReplace1520PCC in Parking LotSharedSharedEthernetNo162C1VRemove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route fiber from TVM 162, through handhole, to TVM 161. Re-route power and comm conduits below grade from TVM 161 to SMV and Parking Pay Station. Re-install SMV and Parking Pay Station. Re-connect Parking Pay Station.1,2,3NEC Violation.https://www.google.com/maps/search/?api=1&query=39° 40' 41" N,104° 59' 33" WMAP
162R-CC onlySWCEvansLinkLRT39° 40' 41" N105° 59' 33" WMAPRemove1720PCC in Parking LotSharedSharedFiberYesDRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. Re-route fiber, through hand hole, to TVM 161.1,3https://www.google.com/maps/search/?api=1&query=39° 40' 41" N,105° 59' 33" WMAP
171Full ServiceSWCEnglewoodLinkLRT39° 39' 20" N104° 59' 59" WMAPRemove1120PCC in ROWSharedSharedEthernetNo172DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. TVM is located on sturcture with hydronic heating system. Contractor is responsible to verify heating pipe locations prior to work to avoid damage to heating system.1,3https://www.google.com/maps/search/?api=1&query=39° 39' 20" N,104° 59' 59" WMAP
172CC onlySWCEnglewoodLinkLRT39° 39' 20" N104° 59' 59" WMAPReplace920PCC in ROWSharedSharedFiberYesC3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Re-route power and comm conduit above grade to SMV and E-Tel. Re-connect SMV and E-Tel. TVM is located on sturcture with hydronic heating system. Contractor is responsible to verify heating pipe locations prior to work to avoid damage to heating system. Due to hydronic heating system, the use of existing anchors and adapter plates to new TVM anchor points may be considered.1 (if existing anchors cannot be used)https://www.google.com/maps/search/?api=1&query=39° 39' 20" N,104° 59' 59" WMAP
181Full ServiceSWCOxfordLinkLRT39° 38' 36" N105° 0' 17" WMAPReplace1120PCC near Parking LotSharedSharedEthernetNoComms CaseC2Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduit below grade from SMV to adjacent handhole. Replace handhole. Re-install and re-connect power and comm to SMV. Re-route conduit for power and comm below grade between TVM 181 and E-Tel. Re-connect E-Tel.1,2,3,4https://www.google.com/maps/search/?api=1&query=39° 38' 36" N,105° 0' 17" WMAP
182R-CC onlySWCOxfordLinkLRT39° 38' 36" N105° 0' 16" WMAPRemove920PCC near Parking LotDedicatedDedicatedEthernetNoComms CaseDTVM has already been removed.N/ANEC Violation.https://www.google.com/maps/search/?api=1&query=39° 38' 36" N,105° 0' 16" WMAP
191Full ServiceSWCDowntown LittletonLinkLRT39° 36' 42" N105° 0' 55" WMAPReplace1420PCC in Parking LotSharedSharedFiberYesC1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove concrete panels under TVM 191 over to SMV. Remove full concrete panels (from joint to joint). Re-route power and comm conduit below grade from TVM 191 to SMV. Re-route conduit below grade to light pole and reconnect comm. Replace concrete panels and re-install SMV. Re-connect power and comm to SMV.3,5VoIP gateway installed in TVM.https://www.google.com/maps/search/?api=1&query=39° 36' 42" N,105° 0' 55" WMAP
192CC onlySWCDowntown LittletonLinkLRT39° 36' 42" N105° 0' 55" WMAPRemove1220PCC in Parking LotSharedSharedEthernetNo191DRemove TVM. Remove concrete panels below TVM 192 and over to Parking Pay Station. Remove full concrete panels (from joint to joint). Re-route power and comm conduits below grade from SAV, Parking Pay Station, and E-Tel to TVM 191 location. Replace concrete panels and re-install SAV, Parking Pay Station, and E-Tel. Re-connect all devices.3,5https://www.google.com/maps/search/?api=1&query=39° 36' 42" N,105° 0' 55" WMAP
201Full ServiceSWCLittleton MineralLinkLRT39° 34' 47" N105° 1' 30" WMAPReplace1430PCC near TVM 201.SharedSharedFiberYesC1Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 201 to SMV and E-Tel. Re-install SMV and E-Tel. Re-connect SMV and E-Tel.1,2,3https://www.google.com/maps/search/?api=1&query=39° 34' 47" N,105° 1' 30" WMAP
202Full ServiceSWCLittleton MineralLinkLRT39° 34' 47" N105° 1' 31" WMAPRemove1030SharedSharedFiberNo203DRemove TVM. Remove old anchors. Install new handhole at TVM location. Remove surface mounted conduit from SMV to TVM location. Remove concrete for the new handhole and to "red" concrete ring to the North. Re-route power and comm (separate) conduits below grade from new handhole to adjacent new SMV location North of new hand hole. Replace concrete where removed. Re-install SMV and re-connect SMV.1,3,5https://www.google.com/maps/search/?api=1&query=39° 34' 47" N,105° 1' 31" WMAP
203CC onlySWCLittleton MineralLinkLRT39° 34' 47" N105° 1' 31" WMAPReplace1230SharedSharedFiberYesC1Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 203 to SMV. Replace concrete where removed. Re-install and re-connect SMV.1,2,3https://www.google.com/maps/search/?api=1&query=39° 34' 47" N,105° 1' 31" WMAP
301Full ServiceCPVAuraria WestLinkLRT38°44'28" N105°0'37" WMAPStreet LevelReplace1120PCC in ROWDedicatedDedicatedEthernetNoComms HouseA3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1,3https://www.google.com/maps/search/?api=1&query=38°44'28" N,105°0'37" WMAP
302Full ServiceCPVAuraria WestLinkLRT39°44'31" N105°0'34" WMAPStreet LevelReplace720PCC in ROWDedicatedSharedFiberYesA3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1,3https://www.google.com/maps/search/?api=1&query=39°44'31" N,105°0'34" WMAP
311R- Full ServiceCPVEmpower Field at Mile HighLinkLRT39°44′36″ N105°00′49″ WMAPStreet LevelRemoveMissingMissingMissingMissingMissingMissingMissingDTVM has already been removed.N/AThis TVM was not present at Station.https://www.google.com/maps/search/?api=1&query=39°44′36″ N,105°00′49″ WMAP
312Full ServiceCPVEmpower Field at Mile HighLinkLRT39°44'31" N105°0'34" WMAPStreet LevelReplace2330PCC at East End of Platform.DedicatedSharedFiberYesC1Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Remove concrete below TVM, E-Tel, and adjacent light pole. Re-route power and comm conduits below grade from TVM 312 to E-Tel and light pole camera. Replace concrete where removed. Re-install E-Tel. Re-connect E-Tel and camera. Re-route conduit to ticket booth below grade from TVM 312 to landscape area and tie into above grade conduit in landsape area. Re-connect comm to ticket booth.1,2,3,5https://www.google.com/maps/search/?api=1&query=39°44'31" N,105°0'34" WMAP
321Full ServiceCPVBall Arena / Elitch GardensLinkLRT39°44′55″ N105°00′33″ WMAPStreet LevelRemove1930PCC in ROWDedicatedDedicatedEthernetNo322DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°44′55″ N,105°00′33″ WMAP
322R-CC onlyCPVBall Arena / Elitch GardensLinkLRT39°44′55″ N105°00′32″ WMAPStreet LevelReplace1730PCC in ROWSharedSharedFiberYesC3Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 322 to SMV and SAV. Replace concrete where removed. Re-install SMV and SAV. Re-connect SMV and SAV.1,2,3https://www.google.com/maps/search/?api=1&query=39°44′55″ N,105°00′32″ WMAP
331Full ServiceCPVDUS - Light RailLinkLRT39°45′20″ N105°0′8″ WMAPStreet LevelRemove1330PCC in ROWSharedSharedFiberYesDRemove TVM and replace with new equipment case. Remove old anchors. Re-install and re-connect all devices.1https://www.google.com/maps/search/?api=1&query=39°45′20″ N,105°0′8″ WMAP
332CC onlyCPVDUS - Light RailLinkLRT39°45′18″ N105°0′12″ WMAPStreet LevelRemove930PCC in ROWSharedSharedFiberYesDRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°45′18″ N,105°0′12″ WMAP
333Full ServiceCPVDUS - Light RailLinkLRT39°45′17″ N105°0′11″ WMAPStreet LevelReplace730PCC in ROWDedicatedSharedEthernetNo332A3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°45′17″ N,105°0′11″ WMAP
401Full ServiceSECLouisiana-PearlLinkLRT39° 41' 35" N104° 58' 43" WMAPStreet LevelReplace1720PCC in ROWDedicatedSharedFiberYesC3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors. Replace fiber between TVM 401 and TVM 402 with ethernet cable. Verify distance, if length is greater than 300 feet, maintain fiber. Reconnect power and comm between TVM and SMV.1Taller Pedestal Heighthttps://www.google.com/maps/search/?api=1&query=39° 41' 35" N,104° 58' 43" WMAP
402Full ServiceSECLouisiana-PearlLinkLRT39° 41' 54" N104° 58' 42" WMAPStreet LevelReplace1520PCC in ROWSharedDedicatedFiberNo401C3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors. Replace fiber between TVM 401 and TVM 402 with Ethernet cable. Verify distance, if length is greater than 300 feet, maintain fiber. Reconnect power and comm between TVM and SMV.1Taller Pedestal Heighthttps://www.google.com/maps/search/?api=1&query=39° 41' 54" N,104° 58' 42" WMAP
411Full ServiceSECUniversity of DenverLinkLRT39° 41' 6" N104° 57' 50" WMAPStreet LevelRemove520PCC across StreetSharedSharedFiberNo412DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. Remove fiber between TVM 411 and TVM 412.1,3https://www.google.com/maps/search/?api=1&query=39° 41' 6" N,104° 57' 50" WMAP
412Full ServiceSECUniversity of DenverLinkLRT39° 41' 5" N104° 57' 50" WMAPStreet LevelReplace320PCC across StreetDedicatedDedicatedFiberYesA1Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Remove fiber between TVM 411 and TVM 412. Re-route power and comm conduit below grade between TVM 412 and SMV. Re-install SMV. Re-connect devices.1,2,3https://www.google.com/maps/search/?api=1&query=39° 41' 5" N,104° 57' 50" WMAP
421Full ServiceSECColoradoLinkLRT39° 40' 47.048" N104° 56' 16.081" WMAPStreet LevelRemove320PCC near parking lotSharedDedicatedFiberNo422DRemove TVM. Remove old anchors. Cut and cap conduits flush with concrete. Remove SAV adjacent to TVM 421 and return to RTD Treasury. Relocate SMV to SAV location and remove old anchors to both devices. Pull fiber to TVM to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39° 40' 47.048" N,104° 56' 16.081" WMAP
422Full ServiceSECColoradoLinkLRT39° 40' 46.288" N104° 56' 15.883" WMAPStreet LevelRemove720PCC near parking lotSharedSharedFiberYesDRemove TVM and replace with new equipment case. Remove old anchors. Re-route conduit from Parking Pay Station to equipment case. Re-install and Re-connect power and comm to Parking Pay Station.1https://www.google.com/maps/search/?api=1&query=39° 40' 46.288" N,104° 56' 15.883" WMAP
423Full ServiceSECColoradoLinkLRT39° 40' 46.331" N104° 56' 15.871" WMAPStreet LevelReplace920PCC near parking lotSharedDedicatedFiberNo422C1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors. Re-route Parking Pay Station power and comm to new equipment case at TVM 422 location.1Parking machine may be on TVM circuit (inconclusive due to potential UPS)https://www.google.com/maps/search/?api=1&query=39° 40' 46.331" N,104° 56' 15.871" WMAP
431Full ServiceSECYaleLinkLRT39° 40' 8" N104° 55' 40" WMAPStreet LevelReplace1220PCC near Parking LotDedicatedSharedFiberYesC1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Rwmove old anchors. Relocate SMV to SAV location adjacent to TVM 431 and reconnect devices. Remove unused SAV stand and return to RTD Treasury. Remove anchors and cut and cap conduits flush with concrete at old SMV location. Remove fiber between TVM 431 and TVM 432.1,3https://www.google.com/maps/search/?api=1&query=39° 40' 8" N,104° 55' 40" WMAP
432Full ServiceSECYaleLinkLRT39° 40' 8" N104° 55' 41" WMAPStreet LevelRemove1020PCC near Parking LotSharedDedicatedFiberNo431DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. Remove fiber between TVM 431 and TVM 432.1,3https://www.google.com/maps/search/?api=1&query=39° 40' 8" N,104° 55' 41" WMAP
441R-Full ServiceSECSouthmoorLinkLRT39° 38' 55.113" N104° 54' 55.123" WMAPStreet LevelRemove120PCC near TVM 441 in parking areaSharedDedicatedFiberNo442DRemove TVM. Install new handhole in TVM location. Re-route power and comm conduits below grade to Parking Pay Station from new handhole. Replace removed concrete. Re-install and re-connect Parking Pay Station.1,2,3,4Decommissioned; Parking machine may be on TVM circuit (inconclusive due to potential UPS)https://www.google.com/maps/search/?api=1&query=39° 38' 55.113" N,104° 54' 55.123" WMAP
442Full ServiceSECSouthmoorLinkLRT39° 38' 55.154" N104° 54' 55.094" WMAPStreet LevelRemove320PCC near TVM 441 in parking areaSharedSharedFiberYesDRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39° 38' 55.154" N,104° 54' 55.094" WMAP
443Full ServiceSECSouthmoorLinkLRT39° 38' 56.803" N104° 54' 55.875" WMAPStreet LevelReplace720PCC near TVM 441 in parking areaSharedDedicatedFiberNo442B3Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 443 to Parking Pay Station. Replace removed concrete. Re-install and re-connect Parking Pay Station.1, 3Parking machine may be on TVM circuit (inconclusive due to potential UPS)https://www.google.com/maps/search/?api=1&query=39° 38' 56.803" N,104° 54' 55.875" WMAP
444Full ServiceSECSouthmoorLinkLRT39° 38' 54.735" N104° 54' 58.139" WMAPElevator and RampReplace2920PCC at end of platformSharedSharedFiberYesB3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove exposed conduit to SMV. Route new power and comm conduit on underside of platform from existing comm and power junction boxes to SMV location. Drill through platform metal deck and slab to SMV base. Scan to locate reinforcing prior to drilling. Re-install and re-connect SMV.1 (sim)https://www.google.com/maps/search/?api=1&query=39° 38' 54.735" N,104° 54' 58.139" WMAP
451Full ServiceSECBelleviewLinkLRT39°37'38" N104°54'16" WMAPStreet LevelRemove120PCC in ROWSharedSharedEthernetNo452DRemove TVM. Remove old anchors. Install new handhole at TVM location. Re-route power and comm (separate) conduits below grade from new handhole to adjacent SMV. Replace concrete where removed. Re-install SMV. Re-connect SMV.1,2,34NEC Violation.https://www.google.com/maps/search/?api=1&query=39°37'38" N,104°54'16" WMAP
452Full ServiceSECBelleviewLinkLRT39°37'38" N104°54'16" WMAPStreet LevelReplace320PCC in ROWSharedSharedFiberYesA1Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Remove adjacent SAV base and return to RTD Treasury. Remove old anchors and cut and cap conduit flush with concrete at SAV.1,2,3https://www.google.com/maps/search/?api=1&query=39°37'38" N,104°54'16" WMAP
461Full ServiceSECOrchardLinkLRT39°36'48" N104°53'46" WMAPStreet LevelReplace420PCC in ROWSharedDedicatedFiberNo462C3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°36'48" N,104°53'46" WMAP
462R-Full ServiceSECOrchardLinkLRT39°36'48" N104°53'47" WMAPStreet LevelRemove220PCC in ROWSharedSharedFiberYesDRemove TVM and replace with new equipment case. Remove old anchors. Re-route power conduit from North SMV to new equipment case. Re-install and re-connect all devices. Remove adjacent SAV base and return to RTD Treasury. Remove old anchors and cut and cap conduit flush with concrete at SAV.1,3https://www.google.com/maps/search/?api=1&query=39°36'48" N,104°53'47" WMAP
471Full ServiceSECArapahoeLinkLRT39° 36' 04" N104° 53' 15" WMAPStreet LevelRemove2020PCC RP1 (see site plan)SharedDedicatedFiberNo474DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused fiber, power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39° 36' 04" N,104° 53' 15" WMAP
472R-Full ServiceSECArapahoeLinkLRT39° 36' 04.107" N104° 53' 15.479" WMAPStreet LevelRemove1820PCC RP1 (see site plan)SharedDedicatedFiberNo474C1Remove TVM and replace with new equipment case. Remove old anchors. Re-route power conduit below grade from new equipment case to SMV. Replace concrete where removed. Re-install and re-connect SMV. Remove adjacent SAV base and return to RTD Treasury. Remove old anchors and cut and cap conduit flush with concrete at SAV.1,2,3Decommissionedhttps://www.google.com/maps/search/?api=1&query=39° 36' 04.107" N,104° 53' 15.479" WMAP
473Full ServiceSECArapahoeLinkLRT39° 36' 2" N104° 52' 20" WMAPElevator and limited streetRemove620PCC RP2 (on platform)SharedSharedFiberNo474DRemove TVM. Remove old anchors. Install new handhole at TVM location. Re-route power and comm conduits below grade from new handhole to adjacent SMV. Replace concrete where removed. Re-install and re-connect SMV.1,2,3,4https://www.google.com/maps/search/?api=1&query=39° 36' 2" N,104° 52' 20" WMAP
474R-Full ServiceSECArapahoeLinkLRT39° 36' 01.290" N104° 53' 18.901" WMAPElevator and RampReplace820PCC RP2 (on platform)DedicatedSharedFiberYesA1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1Decommissionedhttps://www.google.com/maps/search/?api=1&query=39° 36' 01.290" N,104° 53' 18.901" WMAP
481Full ServiceSECDry CreekLinkLRT39°34'49" N104°52'39" WMAPElevator AccessReplace2220PCC RP1 (at end of platform)SharedSharedFiberYesC3Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 481 to SMV and Parking Pay Station. Replace concrete where removed. Re-install SMV and Parking Pay Station. Re-connect SMV and Parking Pay Station.1,2,3https://www.google.com/maps/search/?api=1&query=39°34'49" N,104°52'39" WMAP
482R-Full ServiceSECDry CreekLinkLRT39°34'46" N104°52'39" WMAPElevator AccessRemove2520PCC RP1 (at end of platform)SharedDedicatedFiberNo481DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°34'46" N,104°52'39" WMAP
483Full ServiceSECDry CreekLinkLRT39°34'49" N104°52'32" WMAPElevator AccessRemove420PCC RP1 (at end of platform)SharedSharedFiberNo481DRemove TVM and replace with new equipment case. Remove old anchors. Install new Ruggedcom switch in equipment case and terminate fiber into new Ruggedcom switch. Re-route power conduit below grade from new equipment case to SMV. Replace concrete where removed. Re-install and re-connect SMV.1,2,3https://www.google.com/maps/search/?api=1&query=39°34'49" N,104°52'32" WMAP
491Full ServiceI-225Nine MileLinkLRT39°39'28"N104°50'43"WMAPStreet LevelReplace420PCCSharedSharedFiberYESC3Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 491 to adjacent SMV. Replace concrete where removed. Re-install and re-connect SMV.1,2,3https://www.google.com/maps/search/?api=1&query=39°39'28"N,104°50'43"WMAP
492R-Full ServiceI-225Nine MileLinkLRT39°39'32" N104°50'31" WMAPStreet LevelRemove620PCC RP1 (at end of platform)SharedSharedFiberYESDRemove TVM and replace with new equipment case. Remove old anchors. Re-route all power and comm conduit below grade from new equipoment case to SMVs. Re-install and re-connect SMVs.1,2,3TVM is erroneously labeled 493https://www.google.com/maps/search/?api=1&query=39°39'32" N,104°50'31" WMAP
493Full ServiceI-225Nine MileLinkLRT39°39'28"N104°50'43"WMAPStreet LevelRemove220PCCDedicatedDedicatedFiberNO491DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. Remove adjacent SAV base and return to RTD Treasury. Remove old anchors and cut and cap conduit flush with concrete at SAV.1,3https://www.google.com/maps/search/?api=1&query=39°39'28"N,104°50'43"WMAP
501Full ServiceI-225DaytonLinkLRT39° 38' 37.004" N104° 52' 43.298" WMAPStreet LevelRemove420PCC RP1DedicatedSharedFiberYESDRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. Remove existing adjacent SAV base and return to RTD Treasury. Remove old anchors and cut and cap conduit flush with concrete at SAV.1,3https://www.google.com/maps/search/?api=1&query=39° 38' 37.004" N,104° 52' 43.298" WMAP
502R Full ServiceI-225DaytonLinkLRT39°38'36.99"N104°52'43.22"WMAPStreet LevelReplace520PCC RP1SharedSharedFiberYESC1Remove old TVM and replace with new unit. Remove old anchors. Make power and comm connections to new unit. Re-route power and comm conduits below grade from TVM 502 to SMV and Parking Pay Station. Replace concrete where removed. Re-install SMV and Parking Pay Station. Re-connect SMV and Parking Pay Station.1,2,3https://www.google.com/maps/search/?api=1&query=39°38'36.99"N ,104°52'43.22"WMAP
503R-Full ServiceI-225DaytonLinkLRT39°38'34.97"N104°52'40.23"WMAPOn PlatformRemove220PCC RP1DedicatedDedicatedFiberNODRemove TVM and SAV base. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. Return SAV base to RTD Treasury.1,3https://www.google.com/maps/search/?api=1&query=39°38'34.97"N,104°52'40.23"WMAP
511R-Full ServiceSECCounty LineLinkLRT39° 33' 43.059" N104° 52' 14.521" WMAPStreet LevelRemove820PCC RP1 (see site plan)SharedDedicatedFiberNo512DRemove TVM. Remove old anchors. Cut and cap conduits flush with concrete. Remove SAV adjacent to TVM 511 to unused SAV base adjacent to TVM 512. Remove unused SAV base and return to RTD Treasury. Cut and cap conduit flush with concrete at SAV base.1,3Decommissionedhttps://www.google.com/maps/search/?api=1&query=39° 33' 43.059" N,104° 52' 14.521" WMAP
512Full ServiceSECCounty LineLinkLRT39° 33' 42.992" N104° 52' 14.728" WMAPStreet LevelRemove620PCC RP1 (see site plan)SharedSharedFiberYesDRemove TVM and replace with equipment case. Remove old anchors. Re-route power and comm from SAV and SMV to new equipment case. Re-connect SAV and SMV.1https://www.google.com/maps/search/?api=1&query=39° 33' 42.992" N,104° 52' 14.728" WMAP
513Full ServiceSECCounty LineLinkLRT39° 33' 42.598" N104° 52' 20.251" WMAPElevator AccessRemove420PCC RP2 (at end of platform)SharedDedicatedFiberNo514DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Re-route power to SAV from TVM 514.1,3https://www.google.com/maps/search/?api=1&query=39° 33' 42.598" N,104° 52' 20.251" WMAP
514R-Full ServiceSECCounty LineLinkLRT39° 33' 42.466" N104° 52' 20.234" WMAPElevator AccessReplace220PCC RP2 (at end of platform)SharedSharedFiberYesB3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors. Re-route power to SAV from TVM 514.1Decommissionedhttps://www.google.com/maps/search/?api=1&query=39° 33' 42.466" N,104° 52' 20.234" WMAP
521R-Full ServiceSECLincolnLinkLRT39°32'46"N104°52'10"WMAPStreet LevelRemove212040' from TVMsDedicatedSharedFiberNo523_ _DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. Remove adjacent SAV base and return to RTD Treasury. Remove old anchors and cut and cap conduit flush with concrete at SAV.1,3Decommissionedhttps://www.google.com/maps/search/?api=1&query=39°32'46"N ,104°52'10"WMAP
522R-Full ServiceSECLincolnLinkLRT39°32'46" N104°52'10" WMAPStreet LevelRemove192040' from TVMsSharedSharedFiberNo523_ _DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3Decommissionedhttps://www.google.com/maps/search/?api=1&query=39°32'46" N,104°52'10" WMAP
523Full ServiceSECLincolnLinkLRT39°32'46" N104°52'12" WMAPStreet LevelRemove92040' from TVMsSharedSharedFiberYes523_ _DRemove TVM and replace with new equipment case. Remove old anchors. Re-route all power and comm conduit above grade and tight to fence from SMVs and Parking Pay Station to new equipment case. Re-connect all devices.1,3https://www.google.com/maps/search/?api=1&query=39°32'46" N,104°52'12" WMAP
524Full ServiceSECLincolnLinkLRT39°32'46"N104°52'12"WMAPStreet LevelReplace72040' from TVMsSharedSharedFiberNo523_ _C3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors. Remove adjacent SAV base and return to RTD Treasury. Remove old anchors and cut and cap conduit flush with concrete at SAV.1,3https://www.google.com/maps/search/?api=1&query=39°32'46"N ,104°52'12"WMAP
531Full ServiceSECSky RidgeLinkLRT39°31'56.85"N104°52'14.72"WMAPStreet LevelReplace820PCC (at north end of NE platform)DedicatedDedicatedEthernetNoUnknown; could be in case on platformA3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°31'56.85"N,104°52'14.72"WMAP
532Full ServiceSECSky RidgeLinkLRT39°31'56" N104°52'17" WMAPStreet LevelReplace3930PCC (at north end of NE platform)SharedSharedFiberYesB3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°31'56" N,104°52'17" WMAP
541Full ServiceSECLone Tree City CenterLinkLRT39°31'40" N104°51'48" WMAPStreet LevelRemove3030PCC (at south end of east platform)DedicatedSharedFiberYesDRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°31'40" N,104°51'48" WMAP
542Full ServiceSECLone Tree City CenterLinkLRT39°31'40"N104°51'47"WMAPStreet LevelReplace1630PCC (at south end of east platform)DedicatedSharedEthernetNo541A3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°31'40"N,104°51'47"WMAP
551Full ServiceSECRidgeGate ParkwayLinkLRT39°31'14.4"N104°51'54.86"WMAPStreet LevelRemove530End of platformSharedDedicatedEthernetNo553DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°31'14.4"N ,104°51'54.86"WMAP
552Full ServiceSECRidgeGate ParkwayLinkLRT39°31'13" N104°51'52" WMAPStreet LevelRemove1330End of platformSharedDedicatedEthernetNo553DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°31'13" N,104°51'52" WMAP
553CC OnlySECRidgeGate ParkwayLinkLRT39°31'14.4"N104°51'54.86"WMAPStreet LevelRemove130End of platformSharedSharedFiberYesDRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°31'14.4"N ,104°51'54.86"WMAP
554CC OnlySECRidgeGate ParkwayLinkLRT39°31'12" N104°51'53" WMAPStreet LevelReplace1530End of platformDedicatedDedicatedEthernetNo553A3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°31'12" N,104°51'53" WMAP
591Full ServiceWestDecatur - FederalLinkLRT39°44'15.83"N105°01'23.654"WMAPStreet LevelReplace720Area before turnstiles near platformSharedSharedEthernetNo593B3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°44'15.83"N ,105°01'23.654"WMAP
592Full ServiceWestDecatur - FederalLinkLRT39°44'15.452"N105°01'26.654"WMAPStreet LevelRemove2720Area before turnstiles near platformDedicatedSharedEthernetNo593_ _DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°44'15.452"N,105°01'26.654"WMAP
593R-CC onlyWestDecatur - FederalLinkLRT39°44'15.452"N105°01'26.654"WMAPStreet LevelReplace2520Area before turnstiles near platformSharedSharedFiberYes_ __ _B3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1Decommissionedhttps://www.google.com/maps/search/?api=1&query=39°44'15.452"N ,105°01'26.654"WMAP
601Full ServiceWestKnoxLinkLRT39°44'07.948" N105°01'56.773" WMAPStreet LevelRemove1520PCC10SharedSharedEthernetNo602DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°44'07.948" N,105°01'56.773" WMAP
602R-CC onlyWestKnoxLinkLRT39°44'07.948" N105°01'56.773" WMAPStreet LevelReplace1320PCC10SharedSharedFiberYesB1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°44'07.948" N,105°01'56.773" WMAP
611Full ServiceWestPerryLinkLRT39°44'4" N105°2'22" WMAPStreet LevelRemove2820PCC in ROWDedicatedDedicatedEthernetNo612DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°44'4" N,105°2'22" WMAP
612R-CC onlyWestPerryLinkLRT39°44'5" N105°2'23" WMAPStreet LevelReplace2620PCC in ROWSharedSharedFiberYesB3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°44'5" N,105°2'23" WMAP
621Full ServiceWestSheridanLinkLRT39°44'6" N105°3'12" WMAPStreet LevelRemove1720PCC08SharedDedicatedEthernetNo623DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°44'6" N,105°3'12" WMAP
622Full ServiceWestSheridanLinkLRT39°44'7" N105°3'12" WMAPStreet LevelRemove920PCC08SharedDedicatedEthernetNo623DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°44'7" N,105°3'12" WMAP
623R-CC onlyWestSheridanLinkLRT39°44'6" N105°3'12" WMAPStreet LevelReplace1520PCC08SharedSharedFiberYesB1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°44'6" N,105°3'12" WMAP
631Full ServiceWestLamarLinkLRT39°44'12"N105°04'00"WMAPStreet LevelRemove1620PCC in ROWDedicatedDedicatedEthernetNo632_ _DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°44'12"N ,105°04'00"WMAP
632R-CC onlyWestLamarLinkLRT39°44'12"N105°04'00"WMAPStreet LevelReplace1420PCC in ROWSharedSharedFiberYes_ __ _B3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1Decommissionedhttps://www.google.com/maps/search/?api=1&query=39°44'12"N ,105°04'00"WMAP
641Full ServiceWestLakewood/WadsworthLinkLRT39°44'12" N105°4'52" WMAPStreet LevelReplace1320On platform above street level in PCCSharedSharedFiberYes_ __ _B1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°44'12" N,105°4'52" WMAP
642Full ServiceWestLakewood/WadsworthLinkLRT39°44'12" N105°4'55" WMAPStreet LevelReplace920On platform above street level in PCCSharedDedicatedEthernetNo643_ _B1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°44'12" N,105°4'55" WMAP
643CC onlyWestLakewood/WadsworthLinkLRT39°44'12" N105°4'52" WMAPStreet LevelRemove1520On platform above street level in PCCSharedSharedEthernetNo643_ _DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate.1,3https://www.google.com/maps/search/?api=1&query=39°44'12" N,105°4'52" WMAP
651Full ServiceWestGarrisonLinkLRT39°44'11.417" N105°05'58.904" WMAPStreet LevelRemove1820PCC5SharedSharedEthernetNo652_ _B3Remove TVM and replace with new equipment case. Remove old anchors. Re-install and re-connect all devices.1https://www.google.com/maps/search/?api=1&query=39°44'11.417" N,105°05'58.904" WMAP
652Full ServiceWestGarrisonLinkLRT39°44'11"N105°05'58"WMAPStreet LevelReplace1620PCC5SharedSharedFiberYes_ __ _B3Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°44'11"N ,105°05'58"WMAP
661Full ServiceWestOakLinkLRT39°44'14" N105°7'10" WMAPStreet LevelRemove920PCC4SharedDedicatedEthernetNo662DRemove TVM. Remove old anchors. Cut and cap conduit flush with concrete. Pull unused power and comm cables to nearest HH and terminate. Disconnect power and remove conduit to adjacent parking pay station.1,3https://www.google.com/maps/search/?api=1&query=39°44'14" N,105°7'10" WMAP
662R-CC onlyWestOakLinkLRT39°44'15" N105°7'11" WMAPStreet LevelReplace1320PCC4DedicatedSharedFiberYesA1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°44'15" N,105°7'11" WMAP
671Full ServiceWestFederal CenterLinkLRT39°43'11"N105°07'44"WMAPStreet LevelReplace920PCC3DedicatedSharedEthernetNo672_ _A1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors.1https://www.google.com/maps/search/?api=1&query=39°43'11"N,105°07'44"WMAP
672CC onlyWestFederal CenterLinkLRT39°43'11"N105°07'44"WMAPStreet LevelReplace720PCC3SharedSharedFiberYes_ __ _C1Remove old TVM and replace with new unit. Make power and comm connections to new unit. Remove old anchors. Re-locate Parking Pay Station (by others) to spare conduit adjacent to E-Tel.1https://www.google.com/maps/search/?api=1&query=39°43'11"N,105°07'44"WMAP

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .