Exhibit B.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

TBD B MISC

2k Force and Torque Calibrators N64267-25-R-1020 TBD

Block 14a Addressees:

NAVAIR Metrology and Calibration

NAWCAD BL31400

JB MDL

Highway 547, Building 120-3, Rm. 269 Lakehurst, NJ 08733

NAWCAD BL31400

JB MDL

Highway 547, Building 120-3, Rm. 269 Lakehurst, NJ 08733

NAVAIR METCAL AA14200

Bldg 1403 22113 Fortin Circle, Unit 7 Patuxent River, MD 20670

2 2

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

DATA ITEM DESCRIPTION

Title: SYLLABUS Number: DI-MISC-81459B Approval Date: 20200422 AMSC Number: F10169 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Preparing Activity: 11 (AFLCMC/WNSE) Project Number: MISC-2018-012 Applicable Forms: N/A Use/Relationship: The syllabus is the standardized plan for conducting training in a given course of instruction. It establishes a course configuration baseline and is used as a course control document.

a. This Data Item Description (DID) is applicable to all contracts requiring training course development.

b. This DID contains the format, content, and intended use information for the data deliverable resulting from the work task described in the solicitation.

c. This DID supersedes DI-MISC-81459A.

Requirements:

1. Reference documents. None.

2. Format. Contractor format is acceptable.

3. Content. The Syllabus shall include the following sections:

3.1 Course accounting. This section shall include the following information:

a. Course title

b. Course number

c. Course purpose

d. Course description

e. Course prerequisites

f. Course approval information

g. Course phase of training

h. Grading procedures

i. Status upon graduation from the course

j. Training strategy

k. Academic training, aircrew training devices, ground crew training devices, maintenance training devices, and flying inventory required for the course

l. Class start date

m. Quota control

Source: http://assist.dla.mil -- Downloaded: 2025-04-04T16:47Z Check the source to verify that this is the current version before use.

DI-MISC-81459B

3.2 Course training standards. This section shall include the following information:

a. Training elements to be accomplished

b. Standards of accomplishment for each training element

c. Course map

d. Course sequence

e. Training schedule matrix

3.3 Academic media. This section shall include the following information:

a. Lectures and description

b. Workbook and description

c. Sound and course slides and description

d. Interactive courseware (ICW) lessons and description

e. Required instructional manuals

3.4 Aircrew, ground crew, and maintenance training devices. This section shall include the following information:

a. Training device requirements

b. Mission statement and objective for each training device

c. Explanation of sortie elements to be accomplished

3.5 Criterion-referenced objectives. This section shall include the terminal objectives.

3.6 Course data. This section shall include the following information:

a. Course length

b. Breakdown of classroom and simulator hours

c. Class start date

d. Instructor contact hours

e. Class size

f. Specialty

g. Individual student training plan

h. Class frequency

i. Task list

3.7 Facilities and resources. This section shall include the following information:

a. Location of training

b. Student reporting instructions

c. Instructor staffing requirements

d. Requirements for multiple instruction, if applicable

e. Classroom and simulator layout

f. Student library of reference materials

DI-MISC-81459B

g. Instructor accessibility

h. Facility usage requirements per student

3.8 Explanation of terms. This section shall include explanation of terms unique to the training command or training system.

3.9 Curriculum outline of instruction. The curriculum outline shall provide detailed training data for each aircrew, ground crew, and maintenance position. The outline shall provide the sequence in which the courses are to be presented for each aircrew, ground crew, and maintenance position. The curriculum outline shall contain the following:

a. Curriculum title and scope

b. Academic hours

c. Training tasks

d. Terminal objectives

e. Enabling objectives

f. Method of instruction

g. Training support equipment and materials

h. Student library

End of DI-MISC-81459B