Exhibit A CDRL A001 Final rev.1.pdf
PDF 148 KB Posted
- Solicitation number
- N6852022R0018
About this file
This exhibit document outlines requirements for status reports on the repair and calibration of a Zeiss coordinate measuring machine. The Navy requires the contractor to submit AS FOUND/AS LEFT reports no later than five days after each repair or calibration event through the end of the contract. The reports shall be provided in PDF, Excel, or Word format via email to the technical point of contact and acquisition manager at Fleet Readiness Center Southeast.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N6852022R0018 RFQ.pdf | ||
| Attachment 1 PWS Zeiss Prismo CMM Final.pdf | ||
| Attachment 2 FRCSE Access and Work Restrictions Final.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001 Previous edition may be used. Exhibit (A)
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
Form Approved OMB No. 0704-0188
The public reporting burden for this for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Offi cer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO.
0001, 1001, 2001, 3001, 4001
B. EXHIBIT
A
C. CATEGORY
TDP TM OTHER MGMT
D. SYSTEM/ITEM
ZEISS COORDINATE
MEASURING MACHINE
E. CONTRACT/PR NO.
N6852022R0018
F. CONTRACTOR
Carl Zeiss Industrial Metrology
1. DATA ITEM NO.
A001
2. TITLE OF DATA ITEM
Status Report
3. SUBTITLE
Repair and Calibration AS FOUND/AS LEFT Report
4. AUTHORITY (Data Acquisition Document No.)
DI-MGMT-80368A
5. CONTRACT REFERENCE
SOW PARA 3.5
6. REQUIRING OFFICE
FRCSE
7. DD 250 REQ
LT
9. DIST STATEMENT
REQUIRED
SEE BLK 16
10. FREQUENCY
ASREQ
12. DATE OF FIRST
SUBMISSION
SEE BLK 16
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
8. APP CODE
N/A
11. AS OF DATE
ASREQ
13. DATE OF SUBSEQUENT
SUBMISSION
SEE BLK 16
Draft
Final
Reg Repro
16. REMARKS
1. BLK 9: DISTRIBUTION STATEMENT B. Distribution authorized to Department of Defense (DoD) and U.S. DoD contractors only. Other requests for this document shall be referred to FRCSE Counsel via Process Engineer and the Contracting Office.
2. BLK 12: FIRST SUBMISSION SHALL BE PROVIDED NLT 5 DAYS
AFTER EACH EVENT.
3. BLK 13: SUBSEQUENT SUBMISSIONS SHALL BE DUE NLT 5 DAYS
AFTER EACH EVENT THROUGH THE END OF THE CONTRACT.
4. BLK 14: DELIVERIES SHALL BE PROVIDED IN PDF, EXCEL OR MS
WORD FILE FORMAT AND DELIVERED BY ELECTRONIC MAIL TO THE
TECHNICAL POINT OF CONTACT (TPOC) AND FRCSE ACQUISITION
MANAGER.
FRCSE Acquisition Mgr.
0 1 1
FRCSE TPOC 0 1 1
0 0 3
G. PREPARED BY
Michael C. Byrne
H. DATE I. APPROVED BY
Ardy Kariman
J. DATE
File details come from the government source that posted it. Updated .