Exhibit 2-E andF Type Instructions for Molded Target Slots.pdf

This document contains technical specifications for molded target slot dimensions required by the State of Michigan for a molded targets, backer board, and range equipment procurement. The specifications detail precise manufacturing requirements for "E" and "F" type silhouette molded targets, which must include two horizontal slots and one circular hole milled into the bottom portion of each silhouette. The horizontal slots are specified at 2½ inches in length and ¾ inch in height with rounded ends, positioned 9/16 inches from the bottom edge of the silhouette with 11½ inches of space between the two slots for a total end-to-end distance of 16½ inches. A circular hole measuring ¾ inch in diameter must be placed inline and centered between the two slots. These dimensional requirements establish the technical standards that bidders must meet in manufacturing the molded targets for this procurement.

This specification document represents part of a Michigan state and local contract opportunity that resulted in no award. The file serves as a technical exhibit establishing the exact manufacturing parameters and tolerances required for the target products being procured. Bidders responding to this opportunity would need to demonstrate their capability to precisely mill the specified slots and holes according to the detailed dimensions provided to qualify as viable suppliers for the molded targets and related range equipment.