Exhibit 1-D Ivan Slot Info.pdf

PDF 576 KB Posted

Attached to
NO AWARD- Molded Targets, Backer Board and Range Equipment
Solicitation number
NIA1 511 260000000467 1
Issued by
Michigan

About this file

Written by GovTribe AI ·

This document is a technical specification exhibit for a 3-Dimensional Ivan mannequin molded target related to a Michigan state and local contract opportunity for molded targets, backer board, and range equipment that resulted in no award.

The specification details the physical dimensions and drilling requirements for the 3-D Ivan target, which measures approximately 22.5 inches in width around the bottom front. The document provides precise drilling instructions for clamping connections, including a 3/4-inch circular hole to be drilled in the center front approximately one inch up from the bottom edge. Additional specifications call for drilling rectangular-shaped holes measuring 1/2 inch high by 1 inch long on each side of the target for SAAB targetry compatibility, and oblong-shaped holes measuring 1 inch high by 2 2/3 to 2 3/4 inches long on each side for Inveris/Caswell targetry compatibility. All holes are to be positioned approximately one inch up from the respective side edges and at least one inch up from the bottom edge of the target to ensure proper functionality with various targeting systems.

View the file

Other files

File Type Posted
Exhibit 2-E andF Type Instructions for Molded Target Slots.pdf PDF
Exhibit 4- Ft. Custer Training Center PAM 210-21.pdf PDF
No Award Recommendation and Evaluation Synopsis.pdf PDF
260000001067 Molded Targets, Backerboards and Range Equipment.pdf PDF
Exhibit 5-Camp Grayling Training Pamphlet.pdf PDF
Exhibit 3- Target Equipment Photos.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

3-Dimensional Ivan, Mannequin Molded Target *Approximately 22.5 inches width around bottom of front

PLEASE DRILL HOLES FOR CLAMPING CONNECTIONS:

*Center and drill 3/4" wide circular-shaped hole slot in middle of front of target approximately 1-inch up from bottom edge

*Drill for SAAB targetry 1 rectangular-shaped hole slot approximately 1/2" High X 1" long sideways (see pics) on each side of 3-D Ivan edges approximately 1-inch up from each side edge and at least 1-inch up from bottom edge of target, (2 holes total)

*Drill for Inveris/Caswell targetry 1 oblong-shaped hole approximately 1" High X 2 2/3 to 2 3/4" long sideways (see pic) on each side of 3-D Ivan edges approximately 1-inch up from each side edge and at least 1-inch up from bottom edge of target, 3/4-inch up from bottom edge of target, (2 holes total)

Blank Page

File details come from the government source that posted it. Updated .