Exhibit 2-E andF Type Instructions for Molded Target Slots.pdf

This document contains technical specifications for molded target silhouettes required by the State of Michigan for a molded targets, backer board, and range equipment contract opportunity. The specifications detail the precise dimensions and placement requirements for "E" and "F" type silhouette molded slots that must be machined into the bottom portion of target silhouettes. Two horizontal slots measuring 2 1/2 inches in length and 3/4 inch in height with rounded ends must be milled into each silhouette, positioned with 9/16 inch clearance from the bottom edge and 11 1/2 inches of space between the slots, for a total end-to-end distance of 16 1/2 inches. Additionally, a 3/4 inch diameter circular hole must be drilled inline and centered between the two slots.

The technical specifications provided establish the manufacturing standards required for bidders responding to this Michigan state and local contract opportunity. These dimensional requirements ensure uniformity and compatibility of molded target products with existing range equipment and training systems. Vendors must demonstrate capability to produce targets meeting these exact specifications to be considered for award under this procurement.