ESBD_561051_1790007100934_SOL_EXH_F.3_SOW.pdf
PDF 156 KB Posted
- Attached to
- FLOOR COATING REMOVAL PROJECT
- Solicitation number
- 405-26R0028574
- Issued by
- Williamson County, Texas
About this file
This is a Scope of Work document for the Texas Department of Public Safety (TXDPS) soliciting bids for floor coating removal and application services at Building A of the DPS Tactical Training Center located at 810 Co Rd 240, Florence, TX 76527. The project encompasses removal of existing roll-on floor coating, mechanical surface preparation of concrete surfaces, application of acetone-based concrete stain in a color to be determined, application of commercial-grade protective concrete sealer, and incorporation of fine non-slip additives into the sealer for enhanced traction during wet or icy conditions. The working area covers approximately 5,000 square feet, with the contractor responsible for verifying the actual square footage. The contractor shall provide all necessary labor, equipment, materials, supervision, and job-site mobilization to complete the project scope.
The document does not specify pricing terms, response deadlines, due dates, site visit requirements, bidders' meetings, award dates, contract term, set-asides, incumbent information, or funding sources within the provided scope of work excerpt.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Scope of Work (SOW)
The Texas Department of Public Safety (TXDPS) is requesting bid responses for floor coating removal, surface preparation, and new floor coating application at Bldg. A, DPS Tactical Training Center, Florence, TX.
Project Location:
810 Co Rd 240 Florence, TX 76527
1. Scope of Work
This section outlines the scope of work included in the project. The contractor shall provide all labor, equipment, materials, supervision, and job-site mobilization/travel to complete the project.
a. Removal of existing roll-on floor coating
b. Roughly 5,000 Square feet working area- Contractor is responsible for verifying
Square Footage.
c. Mechanical surface preparation of the concrete
d. Application of acetone-based concrete stain (exact color can be chosen later).
e. Application of commercial-grade protective concrete sealer
f. Fine non-slip additive incorporated into the sealer for improved traction during rainy or icy conditions.
File details come from the government source that posted it. Updated .