ESBD_507914_1776438022115_GOES_logging_transmitter_specifications (1).pdf

This document contains technical performance specifications for a GOES logging transmitter, aligned with NOAA/NESDIS Certification Standard Version 2.0. The specifications detail the functional and operational requirements for a data transmission device capable of supporting both 300 bps and 1200 bps transmission rates. The device must feature Bluetooth or Wi-Fi connectivity for field setup and configuration, with an iOS-compatible mobile application enabling users to perform setup and configuration tasks. The transmitter requires automatic firmware checking and upgrade capabilities upon device connection, along with a test transmission utility for validating system setup. The device must include a digital display for monitoring GPS satellite acquisition and signal quality, and SDI-12 inputs (Version 1.3 or later) with a minimum of two input channels to accommodate multiple data sensors.

The transmitter must operate within an electrical range of 10.8 to 16 V DC, with a quiescent current of less than 10 mA at 12.5 VDC. The device must function across a wide temperature range from -40 to +70 degrees Celsius and deliver RF output power up to 14 Watts. Data logging capacity requires approximately 1,000,000 readings stored on either internal memory or SD card. No pricing terms, set-aside information, incumbent details, or contract award timelines are specified in this technical specifications document.