ESBD_392212_1764628188470_0004088 Attachment E2 - MASTER FURNITURE SPECIFICATIONS FINAL 10_03_25 Revised, Final.pdf
PDF 3 MB Posted
- Attached to
- Furniture and Fixture Package for 1500 Congress and 1501 Lavaca Office Buildings, Capitol Complex, Phase 2
- Solicitation number
- 0004088
- Issued by
- Travis County, Austin City, Texas
About this file
This is a Master Furniture Specifications document for the Texas Facilities Commission's Capitol Complex Phase 2 project, covering furniture and fixture packages for office buildings located at 1500 Congress Avenue and 1501 Lavaca Avenue in Austin, Texas. The specification details comprehensive furniture requirements across multiple building levels, including private office casegoods, task and conference chairs, training room tables, café and lounge seating, credenzas, lecterns, benches, sectionals, banquettes, outdoor furniture, area rugs, and trash/recycling centers. The document specifies manufacturers, models, dimensions, finishes, and configurations for approximately 50+ distinct furniture items, with power, data, and audiovisual integration requirements detailed for conference and training tables. Furniture finishes emphasize black metal components, laminate work surfaces in desert and Montana walnut, and upholstery in vinyl-alternative textiles with specific color palettes from manufacturers including OFS, Bernhardt, Sit on It, National, Stylex, Hightower, JSI, Davis, and Loll. The project spans multiple levels (Level 1 through Level 7) with distinct spaces including conference rooms, training rooms, huddle rooms, phone rooms, quiet rooms, mother's rooms, canteen areas, social hubs, and outdoor terraces. All finishes require submission to HOK for approval, and dealers must verify final quantities with architectural drawings prior to ordering. The estimated total project budget is $15,000,000, with installation planned in phases, Level 1 and Level 2 expected available by December 1, 2026, and complete installation by February 28, 2027.
All respondents must be authorized dealers of proposed manufacturers with fully staffed authorized service centers in Central Texas. Vendors are required to submit a 5 percent bid bond and comply with comprehensive insurance requirements including workers' compensation, commercial general liability of $1,000,000 combined single limit, business automobile liability, and umbrella liability coverage. The contract mandates a Historically Underutilized Business (HUB) Subcontracting Plan targeting 21.1 percent HUB participation, with four methods of compliance: 100% HUB Participation, Meeting the Goal, Good Faith Effort Solicitation, or Self-Performing. Criminal background checks are required for all employees and subcontractors, and all workers must be verified through the E-Verify system. All work includes a one-year warranty on workmanship and materials commencing upon Texas Facilities Commission acceptance of completed work. Liquidated damages of $500 per day apply for work extending beyond agreed-upon completion dates. Mandatory pre-proposal teleconferences are scheduled for December 16 and 17, 2025, with proposal submissions due January 27, 2026 at 3:00 PM through the Bonfire electronic portal. Evaluation criteria weight relevant experience and qualifications at 25 percent, proposed methodology at 20 percent, quality and safety programs at 5 percent, and compensation and fees at 50 percent.
View the file
Other files
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
21.10901.00 | TFC CAPITOL COMPLEX BASE BUILDIING OCTOBER 03, 2025
PACKAGE A |ANCILLARY
RE-SUBMITTED
TFC Capitol Complex Capitol Complex Expansion
Package A: Base Building Furniture
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
SUBMIT ALL FINISHES TO HOK FOR APPROVAL.
10.03.25 – REVISED REVIT TAGS FOR LV 1 CONFERENCE TABLES TO MATCH
SPECIFICATION PACKAGE
RE-SUBMITTED
PO01
ITEM DESCRIPTION: Private Office Casegoods
QUANTITY: (1)
LOCATION: LV 1 – AV Office
SPECIFICATIONS:
A – 24”D x 184” W x 30” H white laminate work surface with self edge. Standard thickness top. Desktop to be divided into 3 equal pieces. Include leg support as necessary (not shown on drawing)
B – (2) Stationary Box/Box/File Cabinet– 24” D x 15” with satin nickel pulls. Include pencil organizer in top drawer.
C – (2) 3’-6” Wide (or closest standard dimension) open storage cabinet with adjustable interior shelf
Include with Pricing - (2) Dekko Clamp on Power Modules with (2- simplex outlets, 1 USB A and 1 USB C) – white finish
(1) Wire management trough for under desk
(2) Desk top grommets to be placed in field, per client Direction – white to match desk.
Floor Plan
Elevation
A
B
C
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
SUBMIT ALL FINISHES TO HOK FOR APPROVAL.
RE-SUBMITTED
CH01
ITEM DESCRIPTION: Huddle Chair
MANUFACTURER: OFS
MODEL: Genus Chair – Multi Use - Light Task
FEATURES: Fixed Arms Star base with Carpet Casters
LOCATION: LVSB Huddle Room
FINISHES: Upholstered Seat: TA01A: Momentum – Hobnob – Henna TA01B: Momentum – Hobnob – Forrest TA01C: Momentum – Hobnob – Bay Back – Storm Plastic Black carpet casters
Back:
Upholstery: B
A
C
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH03
ITEM DESCRIPTION: Task Chair
MANUFACTURER: Sit on It MODEL: Focus 2.0
FEATURES: Fully Ergonomic High Back / Height-/Width-Adjustable Height Adjustable Arms Star Base With Hard Floor And Carpet Casters
FINISHES: Upholstery: Focus 2.0 Uptown Mesh Charcoal Frame/Base/Casters: Black
LOCATION: LVSB Lobby Level
Upholstery:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH07
ITEM DESCRIPTION: Conference Chair for Lobby
MANUFACTURER: OFS
MODEL: Pret Conference Chair 86017
DIMENSIONS: 26.75”W 43”H 25”D
FEATURES: Fixed Arms Star Base With Hard Wheel Caster
LOCATION: LVSB and NCSB Conference Room
FINISHES: Mesh Seat and Back – Black Polished aluminum base and arms Black carpet casters
Frame:
Seat/Back:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH08
ITEM DESCRIPTION: Café Chair
MANUFACTURER: Stylex MODEL: Verve Chair
DIMENSIONS: 19” W 21” D 33” H 18” SH
LOCATION: LVSB Lobby and LVSB/NCSB Social Hub area
FINISHES: Upholstery: CH08A: Maharam – Mode – Rust CH08B: Maharam – Mode – Bonsai CH08C: Maharam – Mode – Denim
Metal Base: Black Twilight
Leg Base:
A
C
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH09
ITEM DESCRIPTION: Armless Flip and Nest Chair
MANUFACTURER: National MODEL: Jiminy
FEATURES: Mobile legs with hard casters
FINISHES: Back: Fierce Mesh Frame: Cinder
Upholstered Seat: Maharam – Mode – Stroll Casters: Black
LOCATION: LVSB Training Rooms at Lobby Level
Frame:
Seat:
Back:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
* Refer to chair layout plans (PG 11-12) for quantities
RE-SUBMITTED
CH09A - Dolly
ITEM DESCRIPTION: Dolly
MANUFACTURER: Stylex MODEL: Transport Dolly
LOCATION: LVSB Training Rooms at Lobby Level
DOLLY
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TRAINING ROOM TABLES AND CHAIR LAYOUT
Large Meeting Room Plan West
NOTES: PLAN INCLUDED FOR PRICING ONLY. FINAL LAYOUT TO BE DETERMINED BY CLIENT AND ARCHITECT
Large Meeting Room Plan East
QTY:
TABLES - 24
CHAIRS - 48
QTY:
TABLES - 24
CHAIRS - 48
RE-SUBMITTED
TRAINING ROOM CHAIR ONLY LAYOUT
NOTES: CHAIR PLAN FOR PRICING ONLY. FINAL LAYOUT TO BE DETERMINED BY CLIENT AND ARCHITECT
Large Meeting Room Plan West
Large Meeting Room Plan East
CHAIRS - 70
CHAIRS - 76
RE-SUBMITTED
CH10
ITEM DESCRIPTION: Counter Stool
MANUFACTURER: OFS
MODEL: Kasura
DIMENSIONS: 25” W 36” H 25” D
LOCATION: LVSB Counter Stool at Lobby
FINISHES: Upholstery: CH10A: Momentum – Canter – Chestnut CH10B: Momentum - Canter - Verdite CH10C: Momentum – Canter – Ballad CH10D: Momentum – Canter – Night Leg Base: Desert on Ash Footrail: Paint – BKO Black
A
C
D
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH11
ITEM DESCRIPTION: Lounge Chair
MANUFACTURER: JSI
MODEL: CĀAV CVF3440-31 TABLET ARM
DIMENSIONS: 39”W 34”D 30”H 17”SH
LOCATION: LVSB Phone Room & All Quiet Rooms
FINISHES: Upholstery: CH11A: Carnegie – Odessey – 6 CH11B: Carnegie – Odessey – 15 CH11C: Carnegie – Odessey – 13 CH11D: Carnegie – Odessey – 9 Frame Finish – Pinnacle Walnut
Wood:
Upholstery:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH12
ITEM DESCRIPTION: Lounge Chair
MANUFACTURER: Bernhardt Design MODEL: Elio Lounge Chair
DIMENSIONS: 35”W 31″D 30”H 16”SH
FEATURES: Self-Return Swivel
LOCATION: LVSB Social Hubs
FINISHES: Upholstery: CH12A: Bernhardt - Bella – Rose CH12B: Bernhardt - Bella – Vine CH12C: Bernhardt - Bella – Lake CH12D: Bernhardt - Bella – Navy
Upholstery:
A
C BC
D
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH13
ITEM DESCRIPTION: Lounge Chair
MANUFACTURER: OFS
MODEL: Lona Lounge 84017-MT
DIMENSIONS: 29” W 32” D 38” H
LOCATION: All Mother’s Rooms
FINISHES: Upholstery: CH10A: Momentum – Canter – Chestnut CH10B: Momentum - Canter - Verdite CH10C: Momentum – Canter – Ballad CH10D: Momentum – Canter – Night
Frame Finish: Onyx
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
SUBMIT ALL FINISHES TO HOK FOR APPROVAL.
Base:
Upholstery: B
A
C
D
RE-SUBMITTED
CH14
ITEM DESCRIPTION: Lounge Chair
MANUFACTURER: Bernhardt Furniture MODEL: Belmont Lounge Chair
DIMENSIONS: 34 1/2” W 35 3/4” D 42 1/4”H 18”SH
LOCATION: LVSB Lobby Lounge Area
FINISHES: Upholstery: Bernhardt - Bella – Navy Frame Finish: Caramel M76
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH15
ITEM DESCRIPTION: Side Chair (Phone Room)
MANUFACTURER: Bernhardt Design MODEL: Canelle 2.0
DIMENSIONS: 31″W 34″D 41″H 17”SH
LOCATION: LVSB Phone Room outside Training Room and Prefunction Area
FINISHES: Upholstery: Bernhardt - Loom - Limestone
Base: Walnut 870
Base:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH018A
ITEM DESCRIPTION: Counter Stool Metal Leg
MANUFACTURER: OFS
MODEL: Harpin - Low Back - Upholstered Stool Counter Height 85059-L
DIMENSIONS: 17.5” W 35.75” H 20.5” D
LOCATION: LVSB and NCSB Canteen Table Counter Height Section
FINISHES: Upholstered seat: CH018AA: Momentum – Hobnob – Henna CH018AB: Momentum – Hobnob – Forrest CH018AC: Momentum – Hobnob – Bay Frame: Onyx
A
C
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH18B
ITEM DESCRIPTION: Dining Chair Metal Leg
MANUFACTURER: OFS
MODEL: Harpin - Mid Back – Upholstered 4 Leg Steel Base 85038-L
DIMENSIONS: 19 ½ “W 36”H 22 ¼”D
LOCATION: LVSB and NCSB Canteen Table Dining Height Section
FINISHES: Upholstered seat: CH018BA: Momentum – Hobnob – Henna CH018BB: Momentum – Hobnob – Forrest CH018BC: Momentum – Hobnob – Bay Frame: Onyx Glides W39
A
C
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
CH19
ITEM DESCRIPTION: Prefunction Chair
MANUFACTURER: Keilhauer MODEL: JUXTA Star Base
DIMESNIONS: 25“W 42”H 28”D
LOCATION: LVSB Classroom Prefunction
FINISHES: Upholstery:
Base: PC23 – Dark Grey
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
RE-SUBMITTED
CH20
ITEM DESCRIPTION: Outdoor Chair
MANUFACTURER: LOLL
MODEL: Alfresco Dining Chair
DIMESNIONS: Refer To CAD File And Furniture Plan For Dimensions
LOCATION: LVSB Terrace
FINISHES: Wood: Loll - Charcoal Grey
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
RE-SUBMITTED
CR02
ITEM DESCRIPTION: Credenza – 72” Width / Laminate
MANUFACTURER: OFS
MODEL: Intermix Credenza
DIMENSIONS: 71”W 24”D 36”H
FEATURES: Trash System on pull out slides. Include Trash Can No Locks Include Black Grommet On Credenza Top And Internal Wire Management
LOCATION: LVSB Conference Room – OFS Tables
FINISHES: Top: Wilsonart Laminate – Montana Walnut Body: Wilsonart Laminate – Montana Walnut Pull: Era – Black
Body:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TABLE TOP POWER LEGEND FOR ALL CONFERENCE ROOM TABLES
Dealer to specify manufactures product that matches configuration listed below All AV to be confirmed with TFC/ AV Consultant
(1) USB- A, (1) USB - C
(2) RJ-45’s
(2) Simplex Grounded Outlets
TYPE B
(1) USB - A, (1) USB - C
(1) HDMI Female to Female with 10” Pigtail
(2) Simplex Grounded Outlets
TYPE A – TO BE LOCATED AT HEAD OF TABLE. CLOSEST TO TV/ MONITOR
POWER LEGEND
(1) USB- A and (1) USB- C, (1) Blank
(2) Simplex Grounded Outlets
TYPE C – FLIP TOP POWER FOR TRAINING TABLES
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA02
ITEM DESCRIPTION: Playbook Media Table - Freestanding
MANUFACTURER: Bernhardt
MODEL: Playbook – Media Conference
DIMENSIONS: 84” W 48”D 30” H
LOCATION: LVSB Small Huddle Meeting Room
FINISHES: Laminate: White with Self Edge Polished Aluminum Base Y-Base
POWER, DATA, AV: Include Power Trac For Work Hub Power
(1) – Type B *Refer to power legend
All Tops To Be In One Section
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
SUBMIT ALL FINISHES TO HOK FOR APPROVAL.
ADD ALTERNATE: Dealer to provide equal alternate option in white laminate with self edge, Powder coat base. Provide power as specified.
RE-SUBMITTED
TA03
ITEM DESCRIPTION: Training Table
MANUFACTURER: OFS
MODEL: Applause Flip and Nest Table with Modesty Panel Base: T center flip and nest base (set of 2)
• Include 120” cord and set of 2 connector brackets as needed per table quantity
DIMENSIONS: 60” W 24”D 29” H
LOCATION: LVSB Training Room – Lobby Level
FINISHES: Top: Frosty White Laminate Modesty Panel: Laminate Base: Graphite Edge: Self Edge - White to match table top Casters: For Carpet - Black
POWER, DATA, AV: Flip top power – with black grommet
(1) per table – Type C *Refer To Power Legend
Base:
Top:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA04
ITEM DESCRIPTION: COUNTER HEIGHT DINING / LOUNGE TABLE
MANUFACTURER: Bernhardt MODEL: Blueprint Block Table
DIMENSIONS: 36”H 36” W 96” L
LOCATION: LVSB Lobby / Café Area
FINISHES: Base/ Frame: 680 Walnut
POWER, DATA, AV: Surface Mount Power Module in black grommet mounted in center 2 – Type C *Refer To Power Legend Wire Management Hidden Inside Leg
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA05
ITEM DESCRIPTION: Café Table
MANUFACTURER: Hightower MODEL: Kona Table Standard Height
DIMENSIONS: 36” W 36” D 29.68” H
LOCATION: LVSB Café Area
FINISHES: Top: White Satin Laminate Base: Black Powder Coat
Top:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA06A
ITEM DESCRIPTION: Café Table
MANUFACTURER: OFS
MODEL: Nineteen20 Disk Base
DIMENSIONS: 30” DIA 29.68” H
LOCATION: NCSB Canteen
FINISHES: Laminate: White ` Base: Powder Coat Graphite
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA06B
ITEM DESCRIPTION: Café Table
MANUFACTURER: OFS
MODEL: Nineteen20 Disk Base
DIMENSIONS: 36” DIA 29.68” H
LOCATION: NCSB Canteen
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA06C
ITEM DESCRIPTION: Café Table
MANUFACTURER: OFS
MODEL: Nineteen20 Disk Base
DIMENSIONS: 24” DIA 29.68” H
LOCATION: All Quiet and Mother’s rooms
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA10
ITEM DESCRIPTION: Outdoor Side Table
MANUFACTURER: Janus et Cie MODEL: Drum Stool
DIMENSIONS: 18 ½”H 14 ¼ “ DIA
LOCATION: LVSB Outdoor Terrace Social Hub
FINISHES: Sage
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA11A
ITEM DESCRIPTION: Coffee Table
MANUFACTURER: Studio TK MODEL: Freehand STAC
DIMENSIONS: 26" W 43" L 11"H
LOCATION: LVSB Lobby and Prefunction
FINISHES: Cushion: Black Cherry Base: Earth
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA11B
ITEM DESCRIPTION: Coffee Table
MANUFACTURER: STUDIO TK
MODEL: Freehand STATB16
DIMENSIONS: 25" W 28" L 17"H
LOCATION: LVSB Lobby
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA11B
ITEM DESCRIPTION: Coffee Table
MANUFACTURER: STUDIO TK
MODEL: Freehand STATA
DIMENSIONS: 15-1/8" W 13-5/8" L 21-5/8"H
LOCATION: LVSB Lobby
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA12
ITEM DESCRIPTION: Outdoor Coffee Table
MANUFACTURER: Loll MODEL: Fresh Air Cocktail Table 62
DIMENSIONS: 60”W 13”H 30”D
LOCATION: LVSB Outdoor Balcony Social Hub
FINISHES: Loll – Charcoal Grey
Base:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA13A
ITEM DESCRIPTION: Conference Table
MANUFACTURER: OFS
MODEL: Meeting Room Series Rectangular Table
DIMENSIONS: 20’ L 5’ W
FEATURES: 1 1/2" Rectangular Tops Lumberband Edges
LOCATION: LVSB Plan South Conference Room, Levels 2-7
FINISHES: Base|Frame: CB-05 Dessert HPL
POWER, DATA, AV: (5) Wood Single Door AV Module with Black Grommet
(1) – Type A
(4) – Type B *Refer to power legend
Base:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA13B
ITEM DESCRIPTION: Conference Table
MANUFACTURER: OFS
MODEL: Meeting Room Series Rectangular Table
DIMENSIONS: 28’ L 5’ W
LOCATION: LVSB Plan South Conference Room
FEATURES: 1 1/2" Rectangular Tops Lumberband Edges
FINISHES: Base|Frame: Dessert HPL
POWER, DATA, AV: (4) Wood Single Door AV Module with Black Grommet
(1) – Type A
(3) – Type B *Refer To Power Legend
* Qty of boxes to be confirmed by manufacturer
Base:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA13C
ITEM DESCRIPTION: Conference Table
MANUFACTURER: OFS
MODEL: Meeting Room Series Rectangular Table
DIMENSIONS: 12’ L 4’ W
LOCATION: LVSB Plan South Conference Room
FEATURES: 1 1/2" Rectangular Tops Lumberband Edges
FINISHES: Base|Frame: Dessert HPL
POWER, DATA, AV: (3) Wood Single Door AV Module with Black Grommet
(1) – Type A
(2) – Type B *Refer To Power Legend
Base:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA13D
ITEM DESCRIPTION: Conference Table
MANUFACTURER: OFS
MODEL: Meeting Room Series Rectangular Table
DIMENSIONS: 18’ L 5’ W
LOCATION: LVSB Plan South Conference Room
FEATURES: 1 1/2" Rectangular Tops Lumberband Edges
FINISHES: Base|Frame: Dessert HPL
POWER, DATA, AV: (3) Wood Single Door AV Module with Black Grommet
(1) – Type A
(2) – Type B *Refer To Power Legend
Base:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA14
ITEM DESCRIPTION: Counter Height to Standard Dining Height Stepped Table
MANUFACTURER: Bernhardt MODEL: Blueprint Block Table Stepped Table
DIMENSIONS: 36”W 72”L to 36”W 96”L
LOCATION: LVSB and NCSB Canteen
FINISHES: Base|Frame: Laminate 680 Walnut
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
Laminate :
RE-SUBMITTED
TA14
ITEM DESCRIPTION: Counter Height to Standard Dining Height Table – Custom Table to Match Architectural Drawing
MANUFACTURER: OFS
MODEL: Kintra Veneer Dual Height Custom Specialty
DIMENSIONS: 36”W 72”L to 36”W 96”L 30” H
LOCATION: LVSB and NCSB Canteen
FINISHES: OFS Laminate Desert
Laminate :
ALTERNATE
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA15
ITEM DESCRIPTION: Phone Room Table
MANUFACTURER: OFS
MODEL: Eleven Wood
DIMENSIONS: 30”W 66” D
LOCATION: LVSB Phone Room Level 1
FINISHES: Top: OFS Laminate Frosty White Frame/Legs: OFS Laminate - Desert
Wood :
Top :
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA16
ITEM DESCRIPTION: Café Table
MANUFACTURER: Hightower MODEL: Kona Table
DIMENSIONS: Standard Height, Round - 30" Diameter
LOCATION: LVSB Social Hub
FINISHES: Laminate: White Satin Laminate Base: Powder Coat Black
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA17
ITEM DESCRIPTION: Café Table
MANUFACTURER: OFS
MODEL: Kosa Table
DIMENSIONS: Standard Height, Round - 36" Diameter
LOCATION: LVSB Social Hub
FINISHES: Solid Surface Top: Bone White Base: Powder Coat Soft Bronze
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
TA18
ITEM DESCRIPTION: Outdoor Table
MANUFACTURER: LOLL
MODEL: Good Company Dining Table
DIMESNIONS: Refer To CAD File And Furniture Plan For Dimensions
LOCATION: LVSB Terrace
FINISHES: Wood: Loll - Charcoal Grey
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
RE-SUBMITTED
LC 01
ITEM DESCRIPTION: Lectern for classrooms and training room QUANTITY: 1 per Training Room
MANUFACTURER: OFS
MODEL: Layer ED1-2444LEC
DIMENSIONS: 22"D 24"W 44.3"H
LOCATION: LVSB Training Room (1 per room)
FINISHES: OFS Laminate: Desert Black Onyx Metal
Metal:
Top:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
LG01
ITEM DESCRIPTION: Bench
MANUFACTURER: Hightower MODEL: Adapt Bench with attached table
DIMENSIONS: Refer To Cad File And Furniture Plan For Dimensions
LOCATION: LVSB Large Conference Room
FINISHES: Seat: Momentum Canter Epu Ancho Frame/ Legs: Standard Black
Seat:
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
LG02
ITEM DESCRIPTION: Lounge Sectional
MANUFACTURER: Davis MODEL: SoMod Sectional
DIMESNIONS: Refer To CAD File And Furniture Plan For Dimensions
LOCATION: LVSB Lobby Area at Lavaca
FINISHES: Upholstery: Carnegie Theory 6142 Frame/ Legs: Upholstered Base
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
LG05
ITEM DESCRIPTION: Outdoor Lounge Sofa
MANUFACTURER: LOLL
MODEL: Nisswa Sofa
DIMENSIONS: 75”W 31 1/2 “D 28”H 19 ½ ”SH
LOCATION: LVSB Terrace Social Hub
FINISHES: Fabric Seat: Loll - Canvas Fern Base: Loll - Charcoal Grey
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
LG06
ITEM DESCRIPTION: Outdoor Lounge Sofa
MANUFACTURER: LOLL
MODEL: Nisswa Lounge Chair
DIMENSIONS: 33”W 31 1/2 “D 28”H 19 ½ ”SH
LOCATION: LVSB Terrace Social Hub
FINISHES: Fabric Seat: Loll - Canvas Fern Base: Loll - Charcoal Grey
Base:
Upholstery:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
LG07
ITEM DESCRIPTION: Banquette
MANUFACTURER: Davis MODEL: Modo
DIMESNIONS: Refer To CAD File And Furniture Plan For Dimensions
LOCATION: LVSB Conference Room
FINISHES: Upholstery: CS Stinson - Tribeca 63754 Regatta Frame/ Legs: Onyx
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
LG08
ITEM DESCRIPTION: Banquette
MANUFACTURER: OFS
MODEL: Coact Mid Back Single Booth Loveseat
DIMESNIONS: Refer To CAD File And Furniture Plan For Dimensions
LOCATION: NCSB Canteen
FEATURES: Provide Ganging Device
FINISHES: Upholstery: LG08A: Momentum – Canter – Chestnut LG08B: Momentum - Canter - Verdite LG08C: Momentum – Canter – Ballad
J5 Plinth Base (Black)
A
C
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
LG09
ITEM DESCRIPTION: Bench with integrated table
MANUFACTURER: Davis MODEL: SoMod Bench
DIMESNIONS: Refer To CAD File And Furniture Plan For Dimensions
LOCATION: LVSB Conference Center
FINISHES: Upholstery: Carnegie Theory 6142
Base: (Black)
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
AC03
ITEM DESCRIPTION: Area Rug
MANUFACTURER: Mohawk – Durkan
MODEL: HTR98784 Custom: 16’ x 32’
PROJECT #: 164717 Texas Facilities Commission Phase 2
FINISHES: Color: 820006, 7L16, 7P14, 6024, 950009, 860017, 7Q23, 7P22, 5K5, 2K3, 772, 7018, 7L16, 7P14 Include rug pad to run width and length of rug
DIMENSIONS: 16’ W 32’ L
LOCATION: LVSB Lobby
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
AC04
ITEM DESCRIPTION: Trash /Recycle Center with Ganging
MANUFACTURER: TROSA
MODEL: TRO-1818L TRO-GNG
Finish : Top: Textured Beige Bottom: Textured ASnthracite
Dimensions: 72”L 12”W 36”H
Location: LVSB and NCSB
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
POWER SPECS PROVIDED FOR PRICING – VERIFY WITH TFC A/V.
SUBMIT ALL FINISHES TO HOK FOR APPROVAL.
Body:
RE-SUBMITTED
AC-01
ITEM DESCRIPTION: Throw Pillow
MANUFACTURER: XXX
MODEL: XXX
COLOR: XXX
LOCATION: Lobby
Upholstery:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
RE-SUBMITTED
AC-02
ITEM DESCRIPTION: Throw Pillow
MANUFACTURER: XXX
MODEL: XXX
COLOR: XXX
LOCATION: Lobby
Upholstery:
GEN. NOTES: NO VINYL ON THIS PROJECT. PROVIDE VINYL-ALTERNATIVE TEXTILES. BLACK METAL FINISH, TYP.
DEALER TO VERIFY FINAL QUANTITIES WITH DRAWINGS BEFORE ORDERING.
| Slide 1 |
| Slide 2 |
| Slide 3 |
| Slide 4 |
| Slide 5 |
| Slide 6 |
| Slide 7 |
| Slide 8 |
| Slide 9 |
| Slide 10 |
| Slide 11 |
| Slide 12 |
| Slide 13 |
| Slide 14 |
| Slide 15 |
| Slide 16 |
| Slide 17 |
| Slide 18 |
| Slide 19 |
| Slide 20 |
| Slide 21 |
| Slide 22 |
| Slide 23 |
| Slide 24 |
| Slide 25 |
| Slide 26 |
| Slide 27 |
| Slide 28 |
| Slide 29 |
| Slide 30 |
| Slide 31 |
| Slide 32 |
| Slide 33 |
| Slide 34 |
| Slide 35 |
| Slide 36 |
| Slide 37 |
| Slide 38 |
| Slide 39 |
| Slide 40 |
| Slide 41 |
| Slide 42 |
| Slide 43 |
| Slide 44 |
| Slide 45 |
| Slide 46 |
| Slide 47 |
| Slide 48 |
| Slide 49 |
| Slide 50 |
| Slide 51 |
| Slide 52 |
| Slide 53 |
| Slide 54 |
| Slide 55 |
| Slide 56 |
File details come from the government source that posted it. Updated .