Enclosure 43 - DA Form 5587-R_Report of Dry-docking Paint and Condition of Bottom.pdf
Department of the Army Form PDF 11 KB Posted
- Attached to
- Brandy Station Shipyard Repair Services
- Solicitation number
- W912PM23Q0042
About this file
This document is a report form used to record details of dry-docking, painting, and hull inspections for naval vessels. It requires information such as the name and identification numbers of the vessel, location and dates of dry-docking, contractor details, hull plate and underwater fitting conditions, fouling levels, and paint records. The related federal contract opportunity is a solicitation from the U.S. Army Corps of Engineers Engineering District Wilmington seeking shipyard repair services at Brandy Station. Services will include dry-docking, inspections, maintenance, and repairs. The solicitation number is W912PM23Q0042 and responses are due on an unstated date.
View the file
Other versions and copies of DA Form 5587-R
| File | Revision | Posted | Attached to |
|---|---|---|---|
| Enclosure 62 - DA Form 5587-R_Report of Dry-docking - Paint and Condition of Bottom (1).pdf Same revision and size as this file | Revision not stated | DREDGE MERRITT – SHIPYARD REPAIR SERVICES |
Who attaches DA Form 5587-R
Other files
Show 40 more
Latest 50 of 77 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DA FORM 5587, AUG 2004
SEA CHESTS AND VALVES
TYPE RENEWED AT THE DOCKING
APD 9V1.000
TIME ELAPSED SINCE LAST PAINTING (Mos & Days)
NAME OF VESSEL/HULL NUMBER/DESIGN NUMBER
REPORT OF DRYDOCKING, PAINTING AND
CONDITION OF VESSEL BOTTOM
(FROM KEEL TO TOP OF BOOT TOP LINE)
For use of this form, see DA PAM 750-8; the proponent agency is DCS, G-4.
REPORTS CONTROL SYMBOL
CSGLD-1943
TO: FROM:
DATE
SECTION I - DRYDOCKING AND PAINTING DATA
SECTION II - CONDITION OF UNDERWATER FITTINGS
Where two or more shafts are fitted, report separately the condition of propellers, shafting, stern and strut bearings, zincs, rings, struts, etc.
Indicate starboard (S) or port (P) as applicable.
COMMAND:
STATION:
LOCATION:
LOCATION OF PRESENT DD OR HAUL OUT
LOCATION LAST DD OR HAUL OUT
CONTRACTOR'S NAME
DATE OF LAST DD DATE REFLOATED
STATE FULLY CONDITION OF THE UNDERWATER HULL PLATES
OUTBOARD SHAFTING AND SLEEVES SIZE OF SHAFT DATE TAIL SHAFT LAST DRAWN
RUDDER(S)
RUDDERS PINTLE BEARINGS AND GUDGEONS RENEWED AT THIS DOCKING
YES NO
PROPELLERS SIZE & PITCH
OUTBOARD STERN BEARING(S) AT DOCKING
PROPELLERS STRUTS
PRIOR TO FLOATING
HOW MUCH WEAR (Thousandths of an inch) DATE LAST CUTLASS RUBBER RENEWED
SEA STRAINERS RENEWED AT THE DOCKING
YES NO
YES NO
RENEWED AT THE DOCKING
YES NO
BILGE KEELS
STERN FRAME/SKEG/KORT NOZZLE
SIZE
SIZE
NUMBER
NUMBER TYPE
HULL ZINCS
ZINC BARS AT SEA
DATE OF PRESENT DD
COST OF PRESENT DDCOST OF CLEANING & PAINTING OF
DA FORM 5587-R EDITION OF NOV 86, IS OBSOLETE.
REVERSE OF DA FORM 5587, AUG 2004
SIGNATURE OF SURVEYOR
SECTION III - BOTTOM FOULING
PLANT ANIMAL
Heavy
Moderate
Slight
SECTION IV- PAINT RECORD
Heavy
Moderate
Slight
CONDITION AND TYPE OF FOULING
APD 9V1.000
WEATHER CONDITION (Temp/Humidity) SANDBLAST TO NEAR WHITE METAL
YES NO
TYPED NAME AND GRADE OF SURVEYOR TYPED NAME AND GRADE OF APPROVING OFFICIAL
SIGNATURE OF APPROVING OFFICIAL
REMARKS
IF FULLY REPAINTED
IF SPOT PAINT ONLY
TIME FACTORS
Time Between Each Coat (Hrs)
Length of Time to Complete Painting
Time Between Last Coat and Refloating
NO. OF COATS MANUFACTURER FORMULA GAL USED
NO. OF COATS MANUFACTURER FORMULA GAL USED
1-2 2-3 3-4 4-5 5-6 6-7 7-8
COATS
File details come from the government source that posted it. Updated .