Ellume Nasal Swab Safety Data Sheet (SDS).pdf
PDF 194 KB Posted
- Solicitation number
- IHS1503917
About this file
This is a Safety Data Sheet (SDS) for the Ellume Nasal Swab medical device, prepared according to EC Regulation No. 1907/2006 (REACH). The document details the safety, handling, and disposal requirements for this medical diagnostic swab product.
The SDS indicates that the nasal swab is classified as non-hazardous under both EC and OSHA regulations, requiring no special safety measures for normal handling. The product is described as a white, odorless adsorbent swab on a threaded cap, to be stored at 2-30°C in its original container. While no significant harmful effects are anticipated from normal use, the document specifies that used devices should be treated as potentially biohazardous waste and disposed of in non-recyclable domestic waste streams. The product falls under Medical Devices Directive 93/42/EEC and US Medical Device Labeling 21 CFR 801 regulatory frameworks.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SAFETY DATA SHEET
According to Regulation (EC) No. 1907/2006 (REACH), Annex II
Version: 1 Page: 1/5 Date: 20/11/2017 Ellume Nasal Swab
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE
COMPANY/UNDERTAKING
1.1 Product identifier
Trade name Ellume Nasal Swab
1.2 Relevant identified uses of the substance or
mixture and uses advised against
Identified use(s) Medical device
1.3 Details of the supplier of the safety data sheet
Company Identification Ellume Pty Ltd.
57 Didsbury St, East Brisbane, Qld 4169 Australia
Telephone +61 7 33931448 E-Mail (competent person) info@ellume.com.au
1.4 Emergency telephone number
Emergency Phone No. (Office hours) +61 7 33931448
SECTION 2: HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture
Regulation (EC) No. 1272/2008 (CLP) Not classified as hazardous.
OSHA Hazard Communication Standard 29
CFR 1910.1200 (HazCom 2012) / GHS
Not classified as hazardous.
2.2 Label elements No measures required.
2.3 Other hazards None anticipated.
2.4 Additional Information As an article with no intended release of ingredients, an SDS is not required for this product. The information contained in this document is provided on a voluntary basis.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.2 Mixtures
Description: Medical device. Swab.
Dangerous components: The product does not contain reportable quantities of dangerous components.
SECTION 4: FIRST AID MEASURES
4.1 Description of first aid measures
Inhalation Not relevant for this material. No measures required.
Skin Contact No measures required.
Eye Contact No measures required.
Ingestion Not relevant for this material. No measures required.
4.2 Most important symptoms and effects, both
acute and delayed
None.
4.3 Indication of the immediate medical attention
and special treatment needed
None.
Version: 1 Page: 2/5 Date: 20/11/2017
SECTION 5: FIRE-FIGHTING MEASURES
5.1 Extinguishing media
Suitable Extinguishing Media CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
5.2 Special hazards arising from the substance or
mixture In case of fire, the following can be released: Hazardous fumes and vapours.
5.3 Advice for fire-fighters Use fire-extinguishing methods suitable to surrounding conditions.
Wear full protective suit and self-contained breathing aparatus (SCBA) when extinguishing fires.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment
and emergency procedures
Refer to Section 8 for protective measures when handling the spillage.
6.2 Environmental precautions No special measures are required.
6.3 Methods and material for containment and
cleaning up Collect material and dispose of as waste according to Section 13.
6.4 Reference to other sections 8, 13
SECTION 7: HANDLING AND STORAGE
7.1 Precautions for safe handling Keep out of reach of children.
Wash hands before eating, drinking or smoking.
7.2 Conditions for safe storage, including any
incompatibilities
Store in the original container at 2 to 30°C.
7.3 Specific end use(s) Use as per instructions for use.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control parameters .
8.1.1 Occupational Exposure Limits The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
8.2 Exposure controls
8.2.1 Appropriate engineering controls Not relevant for this material.
8.2.2 Personal protection equipment
Eye/face protection
Not normally required.
Hand protection
Not normally required.
Body protection Not normally required.
Respiratory protection Not normally required.
8.2.3 Environmental Exposure Controls No special measures are required.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical
properties
Appearance Adsorbant swab on a threaded cap.
Colour White.
Odour No odour.
Odour Threshold (ppm) Not applicable pH (Value) Not determined Melting Point (°C) / Freezing Point (°C) Not determined Boiling point/boiling range (°C): Not determined Flash Point (°C) Not applicable
Version: 1 Page: 3/5 Date: 20/11/2017
Evaporation rate (BA = 1) Not applicable Flammability (solid, gas) Not determined Explosive limit ranges Not applicable Vapour Pressure (Pascal) Not applicable Vapour Density (Air=1) Not applicable Density (g/ml) Not determined Solubility (Water) Not determined Solubility (Other) Not determined Partition Coefficient (n-Octanol/water) Not determined Auto Ignition Temperature (°C) Not determined Decomposition Temperature (°C) Not determined Viscosity (mPa.s) Not determined Explosive properties Not explosive.
Oxidising properties Not oxidising
9.2 Other information Not available
SECTION 10: STABILITY AND REACTIVITY
10.1 Reactivity None known.
10.2 Chemical stability The product is stable in accordance with the recommended storage conditions.
10.3 Possibility of hazardous reactions None known. Hazardous polymerisation will not occur.
10.4 Conditions to avoid None
10.5 Incompatible materials None known.
10.6 Hazardous Decomposition Product(s) None known.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1 Information on toxicological effects
11.1.2 Mixtures
Acute toxicity Based upon the available data, the classification criteria are not met.
Skin corrosion/irritation Based upon the available data, the classification criteria are not met.
Serious eye damage/irritation Based upon the available data, the classification criteria are not met.
Respiratory/skin sensitization Based upon the available data, the classification criteria are not met.
Germ cell mutagenicity Based upon the available data, the classification criteria are not met.
Carcinogenicity Based upon the available data, the classification criteria are not met.
Reproductive toxicity Based upon the available data, the classification criteria are not met.
STOT-single exposure Based upon the available data, the classification criteria are not met.
STOT-repeated exposure Based upon the available data, the classification criteria are not met.
Aspiration hazard Based upon the available data, the classification criteria are not met.
Health Effects and Symptoms Skin Contact No significant harmful effects anticipated Eye Contact No significant harmful effects anticipated Ingestion No significant harmful effects anticipated
Version: 1 Page: 4/5 Date: 20/11/2017
11.2 Other information Not applicable
SECTION 12: ECOLOGICAL INFORMATION
12.1 Toxicity The product does not contain significant quantities of ingredients that are environmentally toxic.
12.2 Persistence and degradability The product is likely to persist in the environment.
12.3 Bioaccumulative potential None anticipated.
12.4 Mobility in soil The product is predicted to have low mobility in soil.
12.5 Results of PBT and vPvB assessment Not applicable
12.6 Other adverse effects Not applicable
SECTION 13: DISPOSAL CONSIDERATIONS
13.1 Waste treatment methods
Product: Used devices should be treated as potentially biohazardous waste. They may be hygienically disposed of in a non-recyclable domestic waste stream.
Packaging: Disposal should be in accordance with local, state or national legislation.
Contaminated packaging must be disposed of in the same manner as the product.
Non-contaminated packaging materials may be recycled.
Contact your local service providers for further information.
SECTION 14: TRANSPORT INFORMATION
14.1 UN number Not applicable
14.2 UN Proper Shipping Name Not applicable
14.3 Transport hazard class(es) Not classified as dangerous for transport.
14.4 Packing Group Not applicable
14.5 Environmental hazards Not applicable
14.6 Special precautions for user Not applicable
14.7 Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable
SECTION 15: REGULATORY INFORMATION
15.1 Safety, health and environmental
regulations/legislation specific for the substance or mixture
Medical Devices Directive 93/42/EEC US Medical Device Labelling 21 CFR 801
15.2 Chemical Safety Assessment Not applicable.
SECTION 16: OTHER INFORMATION
LEGEND
STOT Specific Target Organ Toxicity
References:
Raw material safety data sheets.
Additional Information
Prepared by: Dr. J. J. Tobin, ChemHaz Solutions, Email: info@chemhazsolutions.com
Version: 1 Page: 5/5 Date: 20/11/2017
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
| SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING |
| SECTION 2: HAZARDS IDENTIFICATION |
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS |
| SECTION 4: FIRST AID MEASURES |
| SECTION 5: FIRE-FIGHTING MEASURES |
| SECTION 6: ACCIDENTAL RELEASE MEASURES |
| SECTION 7: HANDLING AND STORAGE |
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION |
| Appropriate engineering controls |
| Environmental Exposure Controls |
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES |
| SECTION 10: STABILITY AND REACTIVITY |
| Possibility of hazardous reactions |
| SECTION 11: TOXICOLOGICAL INFORMATION |
| STOT-single exposure |
| STOT-repeated exposure |
| Aspiration hazard |
| Health Effects and Symptoms |
| Skin Contact |
| Eye Contact |
| Ingestion |
| Other information |
| SECTION 12: ECOLOGICAL INFORMATION |
| Toxicity |
| Persistence and degradability |
| Bioaccumulative potential |
| Mobility in soil |
| Results of PBT and vPvB assessment |
| Other adverse effects |
| SECTION 13: DISPOSAL CONSIDERATIONS |
| Waste treatment methods |
| Product: |
| Disposal should be in accordance with local, state or national legislation. |
| Packaging: |
| Contaminated packaging must be disposed of in the same manner as the product. |
| Non-contaminated packaging materials may be recycled. Contact your local service providers for further information. |
| SECTION 14: TRANSPORT INFORMATION |
| SECTION 15: REGULATORY INFORMATION |
| SECTION 16: OTHER INFORMATION |
File details come from the government source that posted it. Updated .