EDR.pdf
PDF 102 KB Posted
- Attached to
- JTE Radar Transmitter
- Solicitation number
- SPRHA4-26-R-0514
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Instructions document (Hill AFB Form 462) for the manufacture of a Transmitter, Radar T1B, with part number A9070-060702 and National Stock Number 5840016564618. The document was prepared by Chao Chen from the 415 SCMS GUEA office at Hill Air Force Base on 03/05/2026.
The instructions establish mandatory manufacturing and compliance requirements for contractors. Contractors must certify full compliance with all referenced drawings, specifications, and standards prior to contract award and are responsible for conducting a complete search and understanding of all technical requirements. Material and source substitutions require prior approval from the cognizant engineering activity, and deviations from control drawing specifications are not authorized without engineering approval. The system engineer retains the right to review and accept any discrepant items prior to shipment, with all deviations requiring engineering review and disposition. Unique Identification (UID) marking per MIL-STD-130 is required, including human-readable marking of minimum 1/8 inch containing CAGE (17V), Part Number (1P), and Serial Number (1S), and machine-readable 2D matrix marking of minimum 1/4 inch square (Construct 2) with the same data elements. All existing label data must be preserved when labels are replaced, using the same label material specified in the drawing. Compliance with MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418 standards is required.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MQR.pdf | ||
| SPI.pdf | ||
| CPP.pdf | ||
| Pkg_SOW.pdf | ||
| EDL.pdf | ||
| Unmarked Eng Data 2022.pdf | ||
| SPRHA426R0514.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING INSTRUCTIONS
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
TRANSMITTER, RADAR T1B
2. PART NUMBER:
A9070-060702
3. NATIONAL STOCK NUMBER:
5840016564618
PREPARED BY:
Chao Chen
OFFICE SYMBOL:
415 SCMS GUEA
DATE:
03/05/2026
HILL AFB FORM 462
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.i
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL BY
THE COGNIZANT ENGINEERING ACTIVITY.
7. SYSTEM ENGINEER RETAINS ALL RIGHTS TO REVIEW AND ACCEPT DISCREPANT ITEM PRIOR TO SHIPMENT. ANY DEVIATION FROM THE ENGINEERING DRAWING SHALL BE SUBMITTED FOR ENGINEERING REVIEW AND DISPOSITION.
8. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL COMPLIANCE WITH DRAWINGS, SPECIFICATIONS AND STANDARDS CALLED OUT AND REQUIRED FOR THE MANUFACTURE OF THIS ASSEMBLY. THE CONTRACTOR IS RESPONSIBLE TO COMPLETELY SEARCH THESE DRAWINGS, SPECIFICATIONS AND STANDARDS AND FULLY
UNDERSTAND THE REQUIREMENTS NECESSARY TO MANUFACTURE THE ITEM.
9. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130:
a. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
i. CAGE (17V)
ii. P/N (1P)
iii. SERIAL NUMBER (1S)
b. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
i. CAGE (17V)
ii. P/N (1P)
iii. SERIAL NUMBER (1S)
c. LABEL SHALL CONTAI/N ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
d. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
e. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
REV: ENGINEERING INSTRUCTIONS
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
TRANSMITTER, RADAR T1B
2. PART NUMBER:
A9070-060702
3. NATIONAL STOCK NUMBER:
5840016564618
PREPARED BY:
Chao Chen
OFFICE SYMBOL:
415 SCMS GUEA
DATE:
03/05/2026
HILL AFB FORM 462
i
File details come from the government source that posted it. Updated .