EDR.pdf
PDF 105 KB Posted
- Attached to
- Solicitation: FA821225Q0004 F-16 Fuel Cell
- Solicitation number
- FA821225Q0004
About this file
This is an Engineering Data Requirements document (Attachment A) that specifies the manufacturing requirements for an F-16 aircraft Fuel Tank, Fuselage SGL PL ACFT, FWD REM (Part Number: 16VB004001-3, NSN: 1560-01-322-9987WF). The document outlines specific Item Unique Identifier (IUID) requirements that contractors must comply with in their manufacturing process.
The document details labeling and marking specifications, requiring both human readable information (minimum 1/8 inch lettering) and machine readable 2D matrix (minimum 1/4 inch square) that must include CAGE code, part number, and serial number. The IUID marking must be permanent and highly visible in an accessible location. The document specifies that military specifications and standards will not be furnished in the bid set, and any deviations from specifications in control drawings require prior approval from OO-ALC Engineering. The document was prepared by the 416 SCMS/GUEAA office at Hill AFB on October 2, 2018.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SSJ Fuel Cell 1560013229987WF Signed.pdf | ||
| FA8212-25-Q-0004.pdf | ||
| Special Packaging Instruction.pdf | ||
| ID.pdf | ||
| EDL.pdf | ||
| IUID.pdf | ||
| Packaging_SOW.pdf | ||
| AFMC_158.pdf | ||
| AFMC_807.pdf | ||
| DD_1653.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
FUEL TANK, FUSELAGE SGL PL ACFT, FWD REM
2. PART NUMBER:
16VB004001-3
3. NATIONAL STOCK NUMBER:
1560-01-322-9987WF
PREPARED BY:
DONALD WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
10/2/2018
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
8. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE
EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
File details come from the government source that posted it. Updated .