ED3538 Datasheet.pdf

ED3538

Hardened 10/100BASE-TX PoL/PoE Ethernet Extender over Copper Wires

Overview

The ED3538 Hardened Ethernet Extender utilizes EtherWAN’s exclusive Power over Link (PoL) technology to deliver both PoE power and Ethernet communications over a single legacy twisted pair cable, such as a telephone line. The ED3538 PoL solution is comprised of one transmitter and one receiver working together to provide reliable communications and power to remote PoE Powered Devices such as IP cameras, wireless access points, emergency intercoms, or VoIP phones.

With just the transmitter connected to power, the ED3538 provides a maximum of 30 watts of power and a bandwidth of 100Mbps to the ED3538 receiver, at distances up to 300 meters. Under this setup, transmission over longer distances can be achieved with lower data and power throughput — up to 1200 meters at a data rate of 20Mbps and 5 watts of power. However, for applications that require even longer distances, the ED3538 can be connected to power at both the transmitter and the receiver unit, increasing the transmission distance to a remarkable 2200 meters, with a data rate of 1Mbps and a full 30 watts. The current data transmission rate and power sourcing equipment output is displayed by LED indicators.

The ED3538 is highly resistant to electromagnetic interference, shock, and vibration, ensuring connection reliability even in harsh environments.

EtherWAN — "When Connectivity is Crucial."

www.etherwan.com/us/products/ed3538 ED35381 https://www.etherwan.com/us/products/ed3538

Spotlight

Over an 1200 meters long RJ11 cable, a guaranteed 5 watts power with 20Mbps bandwidth is delivered to the receiving side

Up to 300 meters transmission distance with 100Mbps data rate

Power over Link™ up to 1.2 km (3936 ft.)

Ethernet extension solution with high transmission data rate up to 100Mbps

Six transmission rate LEDs and three PoE/PSE output power LEDs on the front panel

Transmission rate and PSE output power indicator LEDs www.etherwan.com/us/products/ed3538 ED35382

Specifications

Ethernet Ports ED3538T/R: 1 x 10/100BASE-TX Full-duplex RJ-45 port ED3538R: 1 x PoE/PSE port Speed: 10/100Mbps Cable: 100BASE-TX, UTP CAT. 5 (4-pair wire) Distance: 100 meters (328ft.)

Ethernet Extender Port 1 x RJ11 port 1 x 2-pin Terminal Block (Wire range: 12-30AWG)

DIP Switch ED3538T: PoL: On/Off, Type: Perf/Std ED3538R: Mode: Loc/Rmt, Type: Perf/Std

LED Indicators Per Unit: Power Per 10/100TX Port: Link/Activity, Full-duplex Line Speed: Six indicators for 100/80/60/40/20Mbps and Link below 20Mbps PoE: Power over Ethernet function availability

► Speed/Distance/PoE Output Reference

* PoL™ Enabled

Distance Data Rate ED3538R PoE Output 300m 100Mbps 30.0W 400m 90Mbps 15.4W 600m 60Mbps 14.0W 800m 45Mbps 9.5W 1000m 35Mbps 7.0W 1200m 20Mbps 5.0W

* PoL™ Disabled (Power Supply Applies on 3538R)

Distance Data Rate ED3538R PoE Output

1400m 15Mbps 30.0W 1600m 10Mbps 30.0W 1800m 3Mbps 30.0W Up to 2200m

1Mbps 30.0W

Interface Note: Reference performance on 24AWG copper wire (0.5mm diameter, 1-pair wire, Cable impendence:

100ohm)

Standards

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX IEEE 802.3x full duplex and flow control IEEE 802.3af/at PoE/PSE

Protocols Transparent to higher layer protocols

Processing Type IEEE 802.3x Full-duplex flow control Auto-Negotiation Auto MDI/MDIX

Input Terminal Block: 46-57VDC

DC JACK: 48VDC

2.5A@48VDC (Peak current 3.26A)

Power Consumption Max. 65W with Power over Link™ (PoL) function enabled ED3538T: Max. 5W (without PoL/PoE) ED3538R: Max. 5W (without PoL/PoE), Max. 35W (with PoE only)

Protection Overload Current Protection Reverse Polarity Protection

Technology

Power www.etherwan.com/us/products/ed3538 ED35383

Operating Temperature -40 to 75°C (-40 to 167°F)

Storage Temperature -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity 5% to 95% (non-condensing)

Casing Aluminum Case

IP30

Dimensions 50 x 110 x 135mm (W x D x H) (1.97" x 4.33" x 5.31")

Weight 0.8Kg (1.76lbs.)

Installation DIN-Rail (Top hat type 35mm), Panel or Rack mounting

Environment

Mechanical

ISO

Manufactured in an ISO 9001 facility

Safety

UL 60950-1

IEC 60950-1

Industrial Compliance

EN 50121-4

EMI

FCC Part 15B Class A

EN 61000-6-4

EN 55022

EN 61000-3-2

EN 61000-3-3

EMS

EN 61000-6-2

• EN 61000-4-2 (ESD Standards)

• EN 61000-4-3 (Radiated RFI Standards)

• EN 61000-4-4 (Burst Standards)

• EN 61000-4-5 (Surge Standards)

• EN 61000-4-6 (Induced RFI Standards)

• EN 61000-4-8 (Magnetic Field Standards)

Environmental Test Compliances IEC 60068-2-6 Fc (Vibration) IEC 60068-2-27 Ea (Shock) IEC 60068-2-32 Ed (Free fall w/package)

Regulatory Approvals

Application www.etherwan.com/us/products/ed3538 ED35384

Dimensions

Ordering Info

ED3538 Hardened PoL/PoE Ethernet Extender over Copper Wires (Including one ED3538T and one ED3538R)

* ED3538T is the power transmitter of PoL and ED3538R is the power receiver of PoL.

* DIN-Rail mounting kit included.

Model

EDR-120-48 120W/2.5A DIN-Rail 48VDC Industrial Power Supply NDR-120-48 120W/2.5A DIN-Rail 48VDC Industrial Power Supply SDR-480-48 480W/10A DIN-Rail 48VDC Industrial Power Supply

Optional Power Supplies

© EtherWAN Systems, Inc. All rights reserved. 20241029 EtherWAN is constantly developing and improving products. Specifications are subject to change without notice and without incurring any obligation.

www.etherwan.com/us/products/ed3538 ED35385