E-26-26_ADDENDUM_ONE_REVISED_-_SPECIFICATIONS.pdf

BID/ E-26-26 / SPECIFICATIONS / ADDENDUM ONE REVISED

Bidders shall select Y to indicate YES to meeting the Line Item Specification/Scope of Work, or N to indicate NO to meeting the Line Item Specification/Scope of Work. Bidders shall submit any Bid Exceptions or Substitution Requests in accordance with the instructions of this bid.

If a Bidder does not indicate Y or N on a Line Item, the City will assume that you do not meet the Line Item

Specification/Scope of Work Description. If you do not clearly mark Y or N, or mark both Y & N the City will assume that you do not meet the Specification. If you leave a selection unmarked or blank, the City will assume that you do not meet the

Specification. BIDDERS ARE INSTRUCTED TO RETURN THE MARKED LINE ITEMS SPECIFICATIONS

WITH THEIR BID SUBMISSION FOR REVIEW BY THE CITY.

PRE-BID MEETING – EXCEPTIONS AND SUBSTITUTIONS

Bidders are strongly encouraged to come prepared to the Pre-Bid Meeting to discuss any anticipated exceptions, deviations, or substitution requests to the specifications.

Bidders shall submit all other questions, requests for clarification, and proposed exceptions or substitutions (not discussed at the Pre-Bid Meeting) to the City prior to the stated Question Submission Deadline via the OpenGov eProcurement Question and Answer Tool.

Any exception, deviation, or substitution not submitted to the City prior to the Questions Submission Deadline shall not be considered and must instead be fully disclosed and documented on the Bid Exceptions / Deviations / Substitutions Worksheet.

Any response marked “Y” that is qualified, altered, or conditioned in any way (including handwritten notes, edits, or attachments) shall be deemed non-responsive to that Line Item.

City of Cheyenne / Bid E-26-26 / Specification / ADDENDUM ONE REVISED

MINIMUM SPECIFICATIONS FOR

2026/2027 UTILITY (SUV) POLICE PACKAGE VEHICLES

GENERAL DESCRIPTION:

Y N 1. Ten (10) new four-door 2026/2027 model utility police interceptor. All equipment, trim and accessories listed as standard equipment shall be supplied herein. The vehicle is to be used for police pursuit service and the model furnished shall be equipped with “Police Package.”

Y N 2. 2026/2027 SUV Utility Interceptor Marked Patrol - Full Cage (Quantity: Six-6)

Y N 3. 2026/2027 SUV Utility Interceptor Traffic- Half Cage (Quantity: Two-2)

Y N 4. 2026/2027 SUV Utility Interceptor Marked Patrol – Half Cage (Quantity: One-1)

Y N 5. 2026/2027 SUV Utility Interceptor Marked Sergeant – NO Cage (Quantity: One-1)

VEHICLE:

Y N 1. For 8 Utility Police Interceptors, Utility Police interceptor package AWD base cost. Exterior Paint

Color, White.

Y N 2. For 1 Traffic – Half Cage, Utility Police interceptor package AWD base cost. Exterior Paint Color, Black

Y N 3. For 1 Traffic- Half Cage, Utility Police interceptor package AWD base cost. Exterior Paint Color, White

MECHANICAL:

Y N 1. All-wheel drive drivetrain with electronic stability control

Y N 2. V6, or V6 Police Hybrid Package, or V8 engine capable of 285 horsepower. Engine may not be turbocharged.

Y N 3. Police calibrated high performance anti-lock brakes with traction control

Y N 4. Electric power assist steering

Y N 5. 8-speed automatic transmission

Y N 6. Heavy duty 250-amp alternator

Y N 7. Large high-volume radiator, engine oil cooler and transmission oil cooler

Y N 8. Engine hour meter

Y N 9. Engine block heater

Y N 10. Engine deflector plate

Y N 11. Front license plate bracket

Y N 12. Driver side LED bulb spotlight

Y N 13. Front headlamp housing pre-drilled/pre-molded holes (No Factory Lights to be installed, shall be upfitter installed)

Y N 14. Tail lamp housing pre-existing holes with standard twist lock sealed compatibility.

Y N 15. Mirrors-heated side view and power adjustable.

Y N 16. Class III tow receiver

Y N 17. Police Engine Idle Feature

INTERIOR:

Y N 1. Column shifter

Y N 2. Heavy duty vinyl flooring

Y N 3. Extra wide opening second row doors

Y N 4. Police grade cloth front seats with 6-way power driver seat

Y N 5. Vinyl second row seats

Y N 6. Certified speedometer

Y N 7. Dome light – Red/White located above driver/passenger seating location

Y N 8. Dark car feature: courtesy lamp disables when any door is opened

Y N 9. Rear View Camera viewable in center display screen, in upper left hand corner.

Y N 10. Global lock-unlock for all doors including rear lift gate

Y N 11. Windows to have factory tint on all windows, except Front Row Driver & Passenger Windows or

Windshields. Factory standard window film / tint / coating acceptable (zero/minimal tint) on Front

Row Driver & Passenger Windows & Windshield.

SAFETY:

Y N 1. Keyless Entry

Y N 2. 75 mph rear end crash tested

Y N 3. Bluetooth – voice activated communication

Y N 4. Reverse sensing

Y N 5. Keyed alike feature, with key code 0135X four (4) Sets of Keys, per vehicle.

MANUALS:

Y N 1. All to be book form, for the make/model/year of vehicle, and delivered with vehicles. If these books do not come in book form, please list the form that they will be delivered in.

Y N 2. One complete set of manuals to include:

Vehicle Service Manual. Form: .

Engine Tune-Up and Electrical Manual Form: .

Electrical Service Manual and Wiring Diagram Form: .

Owner’s Manual (owner’s manual to be one per vehicle) Form: .

Vehicle/Upfitter Service Manual / Build Book Form: .

WARRANTY:

Y N 1. Standard vehicle warranty. Attach and include a copy of the warranty that will be provided with these vehicles.

Y N 2. Whenever warranty work is required on any of the new police vehicles, as determined by the City of Cheyenne Fleet Maintenance Superintendent, an authorized dealership will be accessible and shall be responsible for the vehicle and for the costs related to the warranty. This may include transportation to and from the authorized maintenance facility.

EQUIPMENT WARRANTY:

Y N 1. Warranty on all parts to include no cost (replacement parts and labor) for Five (5) years. Warranty on parts is defined as normal wear and use not damage caused by misuse or secondary party.

Y N 2. Up-fitter must maintain staff, both internal and field level, to respond to equipment repairs within

72-hours notice. Up-fitter must provide means of contact for emergency conditions on a 24 hour/7 day a week basis.

MISCELLANEOUS:

Y N 1. Titles must be made out to the City of Cheyenne, 2101 O’Neil Avenue, Cheyenne, WY 82001 and delivered with the vehicles to the City’s Fleet Maintenance Shop, 2731 Old Happy Jack Rd, Cheyenne, WY 82001.

Y N 2. If a Ford dealer is granted the bid, fleet maintenance will need the Ford diagnostic and programming programs on a bidder supplied laptop (with all cords, and required interface harnesses), 1 year subscription, and all necessary cables and interface modules needed to run the programs.

CLARIFICATIONS FOR BUILDS:

Y N 1. All line item references to products supplied by the Federal Signal Corporation, Feniex Industries, Sound Off Signal, or Whelen, may be interchanged between these brands, so long as the substituted product meets or exceeds the specified features, and functionality of the listed product (unless otherwise noted in sections 3, 4, and 5, below). The Blueprint vehicle integration system shall be acceptable in place of the Intermotive Upfitter Interface Module. All items supplied shall be of equal or superior quality and meet the same performance specifications.

a. This product brand substitution is to include any required brackets or hardware.

Y N 2. Any part numbers that reference or call out a “REC” specific part number, may be replaced by an equal or superior quality part of other brand name, so long as it meets the same performance specifications.

Y N 3. All requests for Whelen branded products have been reviewed, and will not be considered fully at this time. The Liberty II Light Bar is not low profile enough for the Departments needs, and will not be approved. The Whelen Light and Siren controller does not match the existing fleet of

Department vehicles, and will not be approved in order to maintain staff familiarity between controllers between different units.

a. All other requests for consideration of Whelen Branded Products for lights and siren / light controller), so long as the substituted product meets or exceeds the specified features, functionality, and light output of the listed product.

i. The Whelen Edge 9X & Whelen Legacy full size light bars have been approved.

ii. The Liberty II light bar is NOT approved.

Y N 4. All requests for Troy Products have been reviewed, and will not be considered fully at this time.

The Console w/ Printer Mount, Pole for Keyboard Mount, and Offset Platform are not approved.

a. All other requests for consideration for Troy Products for Push Bumper, Rifle Rack, and Full

Partition have been approved, so long as the substituted product meets or exceeds the specified features, and functionality of the listed product.

Y N 5. All requests for Pro Gard Products have been reviewed, and will not be considered fully at this time. The Tri-Lock Gun rack is not approved.

a. All other requests for consideration for Pro Gard Products (Full Cage Partition, Half Cage

Partition, Push Bumper) have been approved so long as the substituted product meets or exceeds the specified features, and functionality of the listed product.

Y N 6. For all metal products relating to cages, Setina is an approved product.

TRAINING:

Y N 1. Fleet On-Site Technical Training. Ford Police Interceptor – Electrical Training. 2-3 day.

Training for Two (2) Technicians, up to Fifteen (15) if needed. This course is recommended for all technicians that will be servicing Ford Police Vehicles.

UPFIT EQUIPMENT PRE-ORDERING REQUIREMENT

Y N 1. Upon award of the Contract, the successful Contractor (Upfitter) shall immediately place orders for all required upfit equipment and accessories necessary to complete the specified work. The

Contractor shall provide proof of such orders upon request by the City. The City will allow payment for upfit materials upon proof of receipt by the Contractor. Acceptable proof shall include a Certificate of Stored Materials and/or photographic evidence of the delivered upfit products.

Payment for such stored materials will be made in accordance with the City’s standard payment procedures. Labor for installation will not be paid until completed. In the event that storage space is not available, a “Just-In-Time” delivery method may be utilized. The City will not allow for delivery date extensions, due to backordered or delayed upfit products.

GRAPHICS PACKAGE

Y N 1. The Cheyenne Police Department graphics rendering is included for reference. Unit #’s to be assigned at the time of build.

Y N 2. This rendering is to be used for all Full Cage units & Half Cage units

Y N 3. The Standard Patrol Units utilize reflective graphics on the “Cheyenne” in white, on top of the non-reflective blue stripe. The back of the unit has reflective white chevrons and reflective word

“Police” on the bottom of the liftgate on the blue stripe. The unit number will be outlined in reflective white on the blue number for the unit. All other graphics applied that are not described above are non-reflective.

Y N 4. The Traffic Unit (Item No.2 in General Description) will utilize a factory paint color, with color matched subdued/reflective ghost graphics applied on the exterior. The Cheyenne Police

Department color matched subdued/reflective ghost graphics rendering is included for reference, to include: No Unit # applied on Traffic Builds. On the patch for the traffic car the patch is cut out not solid

GRAPHICS SPECIFICATION:

Y N 1. The graphic vinyl utilized shall be a high quality, sun resistant product, that can withstand pressure washing. A 3M Branded Vinyl, with a Five (5) Year Warranty shall be utilized. Warranty shall apply to all surfaces (vertical and horizontal surfaces). No Graphics may be seamed in the middle of any panel. The City is able to supply the CPD Specific Logos to the awarded bidder.

STANDARD PATROL GRAPHICS PACKAGE

PUSH BAR LIGHTS MOUNTING PREFERENCE

This is a preference only, and the lights may be installed vertically as well.

EXAMPLE PHOTO OF PATROL GRAPHICS PACKAGE

EXAMPLE PHOTO OF PATROL GRAPHICS PACKAGE

TRAFFIC UNIT REFLECTIVE GHOST GRAPHICS PACKAGE

Example Photo of Traffic Vehicle Reflective Ghost Graphics Package

Example Photo of Traffic Vehicle Reflective Ghost Graphics Package

BID EXCEPTIONS / DEVIATIONS / SUBSTITUTIONS WORKSHEET

The City will not consider any exception that materially alters the intent of the specification and reserves the right to reject such bids as non-responsive. Bidders must use this form to identify all exceptions, deviations, or substitution requests to the specifications, scope of work, or contract terms.

1. Each exception must be listed on a separate line.

2. Clearly reference the applicable Section, Page, and Line Item number.

3. Provide a complete and detailed description of the exception or substitution.

4. Attach supporting documentation if necessary.

Failure to list an exception on this form will be deemed confirmation that the Bidder fully complies with the requirement.

Exceptions, deviations, substitutions, or clarifications noted anywhere else in the bid (including marked specification sheets, notes, or attachments) will not be considered.

Spec

Section /

Page

Line

Item #

Line Item

Reference

Type (Exception /

Deviation /

Substitution)

Description of

Exception /

Deviation

Proposed

Alternative (if applicable)

Impact (Cost /

Performance / Warranty

/ Schedule)

BASE UPFIT SPEC - ALL BUILDS

LINE ITEM DESCRIPTION QTY ITEM USED FOR

Y N 1

INTERMOTIVE UPFITTER INTERFACE MODULE. PROGRAMMING TO BE DETERMINED AFTER

AWARD (THE CPD REQUIRES INDUSTRY STANDARD PROGRAMMING FEATURES.) PROVIDE THE

NUMBER OF MODULES NEEDED TO FULL OPERATE THIS BUILD.

1 INTERFACE MODULE

Y N 2 FEDERAL SIGNAL PLATINUM OR PATHFINDER (PF200S17BRK). SOUNDOFF BLUEPRINT PUSH BUTTON CONTROLLER IS ACCEPTED. NO FENIEX OR WHELEN CONTROLLERS MAY BE USED. 1 LIGHT/SIREN

CONTROL

Y N 3 REC-REAR CARGO-P.S. SSP / CUSTOM FABRICATED REAR CARGO MOUNTING PLATE - D.S. FOR SSP

MOUNT 1 LT/SIREN CONTROL

MOUNTING

Y N 4 FEDERAL SIGNAL ES100 SIREN, COMPOSITE 1

SIREN SPEAKER -

INSIDE GRILL (NO

EXCEPTIONS FOR

MOUNTING)

Y N 5 REC-FIUSPEAKER - UTILITY SIREN SPEAKER MOUNT - BEHIND GRILLE 1 MOUNT FOR INSIDE

GRILLE

Y N 6

FEDERAL SIGNAL MICROPULSE OR EQUIVALENT MODEL LED LIGHT THAT MEETS THE

SPECIFICATIONS FOR MOUNTING LOCATION, RED/WHITE DUAL COLOR WITH 2 INPUTS, 6 LED *MAY

NOT BE INSTALLED AT THE FACTORY VIA OEM, MUST BE INSTALLED AFTERMARKET BY

UPFITTER*

1 D.S. HEADLIGHT

Y N 7

FEDERAL SIGNAL MICROPULSE OR EQUIVALENT MODEL LED LIGHT THAT MEETS THE

SPECIFICATIONS FOR MOUNTING LOCATION. DUAL COLOR, BLUE/WHITE. *MAY NOT BE

INSTALLED AT THE FACTORY VIA OEM, MUST BE INSTALLED AFTERMARKET BY UPFITTER*

1 P.S. HEADLIGHT

Y N 8 ADAPTER BRACKETS FOR MOUNTING WARNING LIGHT IN HEADLIGHT HOUSING 2 HEADLIGHT LT

BRACKETS

Y N 9 FENIEX CANNON HIDEAWAY LED RED/WHITE. OR FEDERAL SIGNAL EQUIVALENT EQUAL PRODUCT (INSTALL RED/WHITE IN D.S. OR P.S. TO MATCH LIGHT BAR COLOR SCHEME) 1 D.S. / P.S. REAR

HIDEAWAY

Y N 10 FENIEX CANNON HIDEAWAY LED BLUE/ WHITE. OR FEDERAL SIGNAL EQUIVALENT EQUAL PRODUCT (INSTALL BLUE/WHITE IN D.S. OR P.S. TO MATCH LIGHT BAR COLOR SCHEME) 1 D.S. / P.S. REAR

HIDEAWAY

Y N 11 FENIEX CANNON HIDEAWAY LED RED/BLUE. OR FEDERAL SIGNAL EQUIVALENT EQUAL PRODUCT

(VISIBLE WHILE LIFTGATE RAISED) 2 LIFTGATE

LIGHTS/MIDDLE

Y N 12

FENIEX CANNON HIDEAWAY, RED/AMBER DUAL COLOR. OR FEDERAL SIGNAL EQUIVALENT EQUAL

PRODUCT. OR FEDERAL SIGNAL EQUIVALENT EQUAL PRODUCT. (VISIBLE WHILE LIFTGATE

RAISED)

1 D.S. OUTSIDE ON

LIFTGATE

Y N 13 FENIEX CANNON HIDEAWAY, BLUE/AMBER DUAL COLOR. (VISIBLE WHILE LIFTGATE RAISED) 1 P.S. OUTSIDE ON

LIFTGATE

Y N 14 FEDERAL SIGNAL MICROPULSE ULTRA, RED/BLUE, LED LIGHT. MODE 1: QUAD FLASH. MODE 2:

SOLID RED, USED AS BRAKE LIGHT, OVERRIDES MODE 1. MAY BE SURFACE MOUNTED OR VIA

LICENSE PLATE BRACKET. IF UTILIZING BRACKET, INCLUDE THIS COST IN YOUR SUBMISSION.

2 LICENSE PLATE

LIGHTS

BASE UPFIT SPEC - ALL BUILDS - ADDENDUM ONE REVISED

Y N 15 WHELEN, 6" ROUND DOME LIGHT, RED/WHITE WITH SWITCH 1 REAR DOME

LIGHT/ON LIFTGATE

Y N 16 UTILITY VEHICLE SPECIFIC 18" ANGLED CONSOLE W/ INTERNAL PRINTER MOUNT (HAVIS BRAND)

VSX SERIES 1 CONSOLE W/PRINTER

MOUNT

Y N 18 BRKT, EQUIP, 1PC, 4MS, SP 1 SIREN CONTROL

FACEPLATE

Y N 19 FACEPLATE, MOTOROLA XTL2500, 5000-05, APX 6500, APX 7500, APX 8500 BRKT, EQUIP, 1PC, 2.5MS, SP, 1 RADIO FACEPLATE

Y N 20 1.5" FILLER PLATE, HAVIS 1 FILLER PLATE

Y N 21 1" FILLER PLATE, HAVIS 1 FILLER PLATE

Y N 22 CON, ACSY, BOX, IM, 3MS, 2.5D 1 ACCESSORY POCKET

Y N 23 DUAL INTERNAL ANGLED CUP HOLDERS 1 ANGLED DUAL CUP

HOLDER

Y N 24 CON, ACSY, ARM, EM, LPD, FLP, -ADJT 1 ARMREST -

MOVEABLE

Y N 25 HAVIS, HEAVY DUTY MOUNT, TELEPOLE WITH SHORT HANDLE (TOP MOUNT STYLE) 1 POLE FOR

KEYBOARD MOUNT

Y N 26 HEAVY DUTY FIXED TOP OFFSET PLATFORM, 9" OFFSET 1 OFFSET PLATFORM

Y N 27 CITY TO SUPPLY DELL PRO RUGGED 14 RB14250 . UPFITTER TO SUPPLY: HAVIS DOCKING STATION MODEL DS-DELL-435-3, AND ALL NECESSARY CABLES INSTALL + POWER ADAPTOR (LPS-196) 1

EQUIPMENT TO BE

SUPPLIED/W POWER

ADAPTOR

Y N 28 2 ½ LB FIRE EXTINGUISHER, PORTABLE WITH MOUNT INSTALLATION. 1 FIRE EXTINGUISHER

Y N 29 3" FULL RANGE SPEAKER - 8 OHM 20 WATT. 1 SPEAKER

Y N 30 L-18-LED-3-UV / LITLITE, 18, LED ON/OFF OR EQUIV SO LONG AS IT MEETS SAME PERFORMANCE

SPECS. 1 MAPLIGHT

Y N 31 DUAL USB POWER CHARGER 12V DC OUTPUT 2 DUAL USB PORTS

Y N 32 12 VDC OUTLET, SINGLE 4 POWER POINT

Y N 33 REC-SPEAKER / HEADLINER RADIO SPEAKER COVER (MAY BE INSTALLED ON PARTION IF SPACE

AVAILABLE, AND FINAL PLACEMENT APPROVED BY CPD PRIOR TO INSTALL) 1 RADIO SPEAKER

COVER HEADLINER

Y N 34 BROTHER 862 PLUS PRINTER (UPFITTER PROVIDE & INSTALL) 1 PRINTER

Y N 35 BROTHER 862 PRINTER / USB CABLE 10' (UPFITTER PROVIDE & INSTALL) 1 PRINTER CABLE

Y N 36 CAR ADAPTER-WIRED 14' (UPFITTER PROVIDE & INSTALL) 1 PRINTER CAR

ADAPTER

Y N 37 MAGLIGHT MAGCHARGER LED. BLACK.ML150LR RECHARGEABLE FLASHLIGHT SYSTEM (SHINY

BLACK) AND ML150LR STARIGHT WIRE TO BE MOUNTED ON DRIVER'S SIDE OF RIFLE RACK 1

LED FLASHLIGHT

WITH BASE /

(CHARGER AND

FLASHLIGHT) AND

WIRE

Y N 38

WIRING HARNESS SYSTEM WITH PRINTED WIRE EVERY 3", ALL SPLICE POINTS TO BE

ULTRASONICALLY WELDED HARNESS SYSTEM. INCLUDES: CUSTOM ENGINEERED HARNESS AND

AS BUILT WIRING DIAGRAMS.INCLUDES:

DEUTSCH STYLE CONNECTIONS TO LIGHTS INCLUDES: WIRE PRINTED WITH FUNCTION NCLUDES:

ULTRASONICALLY WELDED CONNECTIONS INTERNAL OF THE HARNESS NO BUTT SPLICES OR

SCOTCH LOCKS ARE USED IN THE HARNESS CONSTRUCTION INCLUDES LIFETIME WARRANTY ON

WIRING CONNECTIONS FOR BRAKE CUT AND WIG WAG MUST BE DONE USING A NON-INSULATED

BUTT SPLICE WITH GLUING HEATSHRINK AS A COVER. THIS IS THE ONLY AREA THAT A BUTT

SPLICE IS USED. ALL LIGHT CONNECTIONS ARE DONE USING DEUTCH STYLE CONNECTIONS. ALL

CONSOLE TO EQUIPMENT CONNECTIONS USE EITHER DEUTCH OR AMP OEM STYLE CONNECTORS.

ALL CONNECTIONS, SPLICE POINTS, PINOUTS, WIRE COLOR, WIRE FUNCTION AND EQUIPMENT

TERMINATIONS ARE CALLED OUT IN THE VEHICLE SPECIFIC DIAGRAMS. WIRES MAY BE

IDENTIFIED BY OTHER METHODS, AS LONG AS THEY ARE CLEARLY REFERENCED AND IDENTIFIED IN THE BUILD BOOK. BRAKE CUT SHALL BE PROVIDED IN A MANNER SO THAT IT MAY BE EASILY

ENABLED BY THE END USER (CITY OF CHEYENNE,

CHEYENNE POLICE DEPARTMENT) VIA SIMPLE CONNECITON. IF WIRE CANNOT BE PRINTED EVERY 3”, PRINTED WIRE EVERY 6" ON POWER SUPPLY WIRES ORIGINATING FROM AND ORIGINAL TO THE UPFITTER INSTALLED FUSE BOX WILL BE ACCEPTED. ANY OTHER WIRE ADDED IN/TO THE VEHICLE

SHALL HAVE A LABEL ATTACHED WITHIN 6 INCHES FROM ITS SOURCE, AND WITHIN 6 INCHES

FROM ITS OUTPUT, LOAD, OR OTHERWISE END OF THE CIRCUIT THAT IS CLEARLY LEGIBLE AND ADEQUATELY DESCRIBES THE CIRCUIT'S OPERATION IN RELATION TO THE UPFITTER PROVIDED

WIRING DIAGRAM IN THE BUILD BOOK. IN THE EVENT ULTRASONIC WELDING CANNOT BE

UTILIZED, THE CITY WILL ACCEPT BUTT SPLICES WITH HEAT SHRINK OR SOLDERED CONNECTION

WITH HEAT SHRINK

1 WIRING HARNESS

Y N 39

COPELAND ENGINEERING VOLTAGE AND TIMER MODULE. SENSE LOW VOLT CONDITIONS AND

SHUTS OFF AUX LOADS WHEN LOW VOLT CONDITIONS EXIST AND HAS BUILT IN DELAY TIMER /

MAY BE SUBSTITUTED FOR THE BLUEPRINT SYSTEM

1 ELECTRONICS TIMER

Y N 40 PASSENGER AIRBAG CUT OFF SWITCH (OR FACTORY AIRBAG DELETE FOR PASSENGER SIDE). (NO

EXCEPTIONS) 1 P.S. AIRBAG SWITCH

Y N 41

AXON FLEET 3 – WIRING KIT REFRESH SKU 100150. CITY WILL SUPPLY ALL AXON PRODUCTS.

UPFITTER SHALL INSTALL AXON WIRING HARNESS, IN ADVANCE OF AXON COMPLETING THE

FINAL INSTALLATION OF CAMERAS UNLESS UPFITTER IS PART OF THE AXON SERVICES NETWORK.

COORIDINATE WITH CPD AND CITY FLEET TO DETERMINE WIRING LAYOUT PRIOR TO

INSTALLATION.

WIRING KIT FOR

AXON FLEET 3 IN-

CAR CAMERA

Y N 42

REC-REARC ARGO-D.S. RADIO / CUSTOM. FABRICATED REAR CARGO MOUNTING PLATE - D.S. FOR RADIO MOUNT. (THIS LINE ITEM IS TO PROVIDE A SECURE MOUNTING LOCATION FOR RADIO, TO

KEEP WIRES CONTAINED / COVERED) A TRAY / COMPARTMENT THAT FOLDS DOWN IN THE CARGO

AREA IS ACCEPTABLE.

1 RADIO MOUNT IN

CARGO

Y N 43

MOTOROLA APX8500 REMOTE HEAD DUAL BAND RADIO (RADIO TO BE SUPPLIED BY CITY,

INSTALLED BY UPFITTER). RADIOS TO BE PROGRAMMED BY UPFITTER / RADIO DEALER, PRIOR TO

DELIVERY. CITY WILL FURNISH THE REQUIRED MULTIPLEXER.

1 IN-CAR RADIO

Y N 44 MAGNETIC MIC MOUNTING CLIP 2 MAGNETIC MIC

Y N 45 RADIO WHIP INSTALLATION. (UPFIT PROVIDING AND INSTALLING) 2

RADIO WHIP FOR

MOTOROLA APX8500

DUAL BAND RADIO

Y N 46 PULSE / LARSEN - 0-6000 MHZ, 3/4" MOUNT, RG58A/U, NO CONNECTOR 2 ANTENNA BASE

Y N 47 MUST HAVE LIGHTING SYSTEM PATTERNS APPROVED BY POLICE DEPT. AND FLEET

MAINTNENANCE MANGER. 1 LIGHTING SYSTEM

PATTERNS

END - BASE UPFIT SPEC - ALL BUILDS

BUILD SPECIFIC ADD ONS - PATROL - FULL CAGE

Y N 1

51" FEDERAL SIGNAL VALOR, MULTI COLOR LIGHTBAR. RED/WHITE DRIVER SIDE, BLUE/WHITE PASSENGER SIDE, RED/AMBER BLUE/AMBER REAR. NO HOT FOOT, HOOK MOUNTING, FULL FLOOD

WITH CORNER CUT OUT. OR EQUIVALENT SOUNDOFF SIGNAL NFORCE NXT NEXUS TECHNOLOGY

EXTERIOR FULL SIZE LIGHTBAR 54”. OR EQUIVALENT WHELEN EDGE 9X OR LEGACY FULL SIZE

LIGHTBAR.

1 EXTERIOR LIGHT

BAR

Y N 2 HOOK KIT, FOR UTILITY 1 HOOK KIT

Y N 3 SEALED ELBOW CONNECTOR 1 ROOF CONNECTION

Y N 4 NUT FOR SEALED PG 13.5 CONNECTOR 1 NUT FOR

CONNECTOR

Y N 5 IPX633 SERIES, FEDERAL SIGNAL, 1 LIGHT HOUSING, RED, BLUE, WHITE TRI COLOR LED (FORWARD

FACING) (OR CURRENT MPS63U-RBW MICROPULSE) 2 TRI COLOR / FRONT

BUMPER LTS

Y N 6 FEDERAL SIGNAL MICROPULSE ULTRA, RED/WHITE DUAL COLOR WITH 2 INPUTS, 6 LED (MOUNTED

@ 45 DEGREE ANGLE) 1 D.S. SIDE OF PUSH

BUMPER

Y N 7 FEDERAL SIGNAL MICROPULSE ULTRA LED LIGHT. DUAL COLOR, BLUE/WHITE (MOUNTED @ 45

DEGREE ANGLE 1 P.S. SIDE OF PUSH

BUMPER

Y N 8 FEDERAL/WESTIN/SETINA PUSH BUMPER (TROY PRODUCTS OR PRO GARD MAY BE UTILIZED) 1 PUSH BUMPER

Y N 9 2-LIGHT TOP CHANNEL FOR UTILITY/SEDAN FOR PBX05 BUMPER WITH IPX6 LIGHTS 1 LIGHT CHANNEL FOR

BUMPER

Y N 10 WIRE COVERS FOR USE WITH PBX05 BUMPER 1 SIDE WIRE COVERS

Y N 11

SINGLE RIFLE RACK, FULLY ADJUSTABLE. BUILT FOR FULL CAGE PROGARD OR SETINA. WITH

MAGLIGHT CHARGER MOUNTED. (SINGLE GUN / SINGLE LOCK - WITH A "SANTA CRUZ HANDCUFF

STYLE" LOCK) ***TRI-LOCK NOT ACCEPTED***

1 SINGLE RIFLE

MOUNT

Y N 12 STALKER DSR RADAR UNIT WITH CABLES AND MOUNTING HARDWARE INSTALL UPFITTER TO SUPPLY DUAL ANTENNA STYLE RADAR UNIT. (MOUNT AS 1 PIECE ON TOP OF DASH) 1 DASH MOUNT RADAR

UNIT

Y N 13 DUAL ANTENNA RADAR UNIT INSTALL 1 DASH MOUNT RADAR

ANTENNA

Y N 14 FULL PRISONER TRANSPORT POLYCARBONATE CENTER SLIDER WINDOW WITH EXPANDED METAL

INSERT (MAY BE PRO-GARD OR SETINA BRANDED PRODUCTS) 1 FULL PARTITION

Y N 15 RECESSED PANEL (SPACE SAVER), UTILITY 1 RECESSED PANEL

Y N 16 UTILITY PRISONER TRANSPORT SEAT/ CARGO BARRIER/OUTBOARD SEAT BELTS: POLYCARBONATE

CARGO BARRIER: - MUST BE POLY CARGO BARRIER. SEAT SHALL BE REPLACEMENT STYLE SEAT, NOT SEAT COVER

1 PLASTIC SEAT WITH

REAR BARRIER

Y N 17 ABS DOOR PANELS ON TWO PRISONER / REAR DOORS. (FULL DOOR PANELS, NOT HANDLE COVER

PLATES) 2 FULL DOOR PANELS

BUILD SPECIFIC ADD ONS - PATROL - FULL CAGE - ADDENDUM ONE REVISED (NO CHANGES)

BUILD SPECIFIC ADD ONS - PATROL - FULL CAGE

Y N 18 PAIR, ¼" POLYCARBONATE WINDOW BARRIER 1 POLY WINDOW

GUARDS

Y N 19 CHARCOAL GREY ABS, FLOOR PAN 1 FLOOR PAN

Y N 20 V DRAIN, FOR USE WITH FLOOR PANS. REDUCE TO ONE DRAIN IF REQUIRED BASED ON BUILD

LIMITATIONS 2 FLOOR DRAINS

Y N 21 LED PUCK LIGHT, RECESSED, COOL WHITE. OR WHELEN STRIP-LITE PLUS SERIES 2 PRISONER LIGHT

Y N 22 GRAPHICS PACKAGE FOR CHEYENNE POLICE 1 GRAPHICS PACKAGE

END - BUILD SPECIFIC ADD ONS - PATROL - FULL CAGE

BUILD SPECIFIC ADD ONS - TRAFFIC - HALF CAGE

Y N 1 SIFZS-SPECTRALUX / FEDERAL SIGNAL "LOW PROFILE" FRONT FULL INTERIOR ILS. DUAL COLOR, FULL FLOOD SOUNDOFF EQUAL APPROVED. 1 FULL INTERIOR

LIGHTBAR

Y N 2 FENIEX FUSION DUAL COLOR LED LIGHT STICK, RED/WHITE, BLUE/WHITE WITH 180 DEGREE OPTICS

FROM DRIVER TO PASSENGER: 180 RED/WHITE, 180 RED/WHITE, 180 RED/WHITE, 180 BLUE/WHITE, 180 BLUE/WHITE, 180 BLUE/WHITE PLACED BEHIND GRILL

1 FRONT GRILL

STICK/FULL FLOOD

Y N 3 GRILL STICK MOUNTING BRACKET 1 GRILL STICK

BRACKET

Y N 4

FENIEX QUANTUM SPOILER RED/BLUE. (MAY USE ALTERNATE BRANDED BRACKETS / SEPARATE

LIGHTS IN LIEU OF THE QUANTUM SPOILER - FEDERAL SIGNAL MICROPULSE SPOILER BRACKET, AND MICROPULSE SPOILER LIGHTS)

2 EXTERNAL ON

SPOILER

Y N 5 CUSTOM REAR SINGLE BRACKET MOUNT 2 MOUNTING

BRACKETS

Y N 6 FENIEX FUSION FSM SURFACE MOUNT LIGHTING RED/BLUE 4 D.S./P.S. FRONT DOOR

LOWER MOLDING

Y N 7 FENIEX FUSION FSM SURFACE MOUNT LIGHTING RED/BLUE 4 D.S/P.S. REAR DOOR

LOWER MOLDING

Y N 8 FEDERAL SIGNAL MICROPULSE ULTRA, RED/WHITE DUAL COLOR WITH 2 INPUTS, 6 LED 1 D.S. REAR DOOR

LIGHT

Y N 9 FEDERAL SIGNAL MICROPULSE ULTRA LED LIGHT. DUAL COLOR, BLUE/WHITE 1 P.S. REAR DOOR

LIGHT

Y N 10 FEDERAL SIGNAL MICROPULSE ULTRA, RED/WHITE DUAL COLOR WITH 2 INPUTS, 6 LED 1 P.S. REAR SIDE LIGHT

Y N 11 FEDERAL SIGNAL MICROPULSE ULTRA LED LIGHT. DUAL COLOR, BLUE/WHITE 1 D.S. REAR SIDE LIGHT

Y N 12

2 SIDE WINDOWS - 2ND ROW (MOUNTED ON LOWER WINDOW FRAME, INTERIOR, CENTERED ON

PANEL) 2 REAR SIDE WINDOWS - CARGO AREA (MOUNTED ON LOWER WINDOW FRAME, INTERIOR, CENTERED ON PANEL)

4 P.S. AND D.S. SIDE

BRACKETS

Y N 13 SOUND OFF INTERSECTOR LIGHT, RED/WHITE. WITH SURFACE MOUNT VEHICLE SPECIFIC

MOUNTING BRACKET (UNDER MIRROR MOUNT) 1 D.S. MIRROR LIGHT

Y N 14 SOUND OFF INTERSECTOR LIGHT, BLUE/WHITE. WITH SURFACE MOUNT VEHICLE SPECIFIC

MOUNTING BRACKET (UNDER MIRROR MOUNT) 1 P.S. MIRROR LIGHT

Y N 15 FENIEX FUSION FSM SURFACE MOUNT LIGHTING RED/BLUE 4 REAR BUMPER

LIGHTS

BUILD SPECIFIC ADD ONS - TRAFFIC - HALF CAGE - ADDENDUM ONE REVISED

BUILD SPECIFIC ADD ONS - TRAFFIC - HALF CAGE

Y N 16

2 SIDE WINDOWS - 2ND ROW (MOUNTED ON LOWER WINDOW FRAME, INTERIOR, CENTERED ON

PANEL) 2 REAR SIDE WINDOWS - CARGO AREA (MOUNTED ON LOWER WINDOW FRAME, INTERIOR, CENTERED ON PANEL)

4 P.S. AND D.S. SIDE

BRACKETS

Y N 17 STALKER DSR 2X RADAR UNIT WITH CABLES AND MOUNTING HARDWARE INSTALL UPFITTER TO

SUPPLY DUAL ANTENNA STYLE RADAR UNIT. MOUNT AS 1 UNIT ON DASH 1 DASH MOUNT RADAR

UNIT

Y N 18 DUAL ANTENNA RADAR UNIT INSTALL 1 DASH MOUNT RADAR

ANTENNA

Y N 19 SINGLE PRISONER CMPT, PRO-CELL PRISONER TRANSPORT SYSTEM, 1/2 PARTITION W/OUTBOARD SEAT BELTS - WITH POLY WINDOW GUARDS, POLY BARRIER WITH POLY IN PARTITION 1 ½ CAGE PRISONER

COMPARTMENT

Y N 20 ABS DOOR PANEL ON PRISONER / REAR DOOR. (FULL DOOR PANEL, NOT HANDLE COVER PLATES) 1 FULL DOOR PANELS

Y N 21

SINGLE RIFLE RACK, FULLY ADJUSTABLE. BUILT FOR HALF CAGE PROGARD OR SETINA.

(FORWARD FACING GUN RACK, NOT MOUNTED IN 2ND ROW) WITH MAGLIGHT CHARGER

MOUNTED.

1 SINGLE RIFLE MOUNT

Y N 22 RECESSED PANEL, UTILITY 1 RECESSED PANEL

Y N 23 CHARCOAL GREY ABS, FLOOR PAN 1 FLOOR PAN

Y N 24 V DRAIN, FOR USE WITH FLOOR PANS. REDUCE TO ONE DRAIN IF REQUIRED BASED ON BUILD

LIMITATIONS 2 FLOOR DRAINS

Y N 25 LED PUCK LIGHT, RECESSED, COOL WHITE. OR WHELEN STRIP-LITE PLUS SERIES 2 PRISONER LIGHT

Y N 26 GRAPHICS PACKAGE FOR TRAFFIC UNIT 1 GRAPHICS PACKAGE

END - BUILD SPECIFIC ADD ONS - TRAFFIC - HALF CAGE

BUILD SPECIFIC ADD ONS - PATROL - HALF CAGE

Y N 1

51" FEDERAL SIGNAL VALOR, MULTI COLOR LIGHTBAR. RED/WHITE DRIVER SIDE, BLUE/WHITE PASSENGER SIDE, RED/AMBER BLUE/AMBER REAR. NO HOT FOOT, HOOK MOUNTING, FULL FLOOD

WITH CORNER CUT OUT. OR EQUIVALENT SOUNDOFF SIGNAL NFORCE NXT NEXUS TECHNOLOGY

EXTERIOR FULL SIZE LIGHTBAR 54”.

1 EXTERIOR LIGHT BAR

Y N 2 HOOK KIT, FOR UTILITY 1 HOOK KIT

Y N 3 SEALED ELBOW CONNECTOR 1 ROOF CONNECTION

Y N 4 NUT FOR SEALED PG 13.5 CONNECTOR 1 NUT FOR

CONNECTOR

Y N 5 IPX633 SERIES, FEDERAL SIGNAL, 1 LIGHT HOUSING, RED, BLUE, WHITE TRI COLOR LED (FORWARD

FACING) 2 TRI COLOR / FRONT

BUMPER LTS

Y N 6 FEDERAL SIGNAL MICROPULSE ULTRA, RED/WHITE DUAL COLOR WITH 2 INPUTS, 6 LED (MOUNTED

@ 45 DEGREE ANGLE) 1 D.S. SIDE OF PUSH

BUMPER

Y N 7 FEDERAL SIGNAL MICROPULSE ULTRA LED LIGHT. DUAL COLOR, BLUE/WHITE (MOUNTED @ 45

DEGREE ANGLE 1 P.S. SIDE OF PUSH

BUMPER

Y N 8 FEDERAL/WESTIN/SETINA PUSH BUMPER 1 PUSH BUMPER

Y N 9 2-LIGHT TOP CHANNEL FOR UTILITY/SEDAN FOR PBX05 BUMPER WITH IPX6 LIGHTS 1 LIGHT CHANNEL FOR

BUMPER

Y N 10 WIRE COVERS FOR USE WITH PBX05 BUMPER 1 SIDE WIRE COVERS

Y N 11

SINGLE RIFLE RACK, FULLY ADJUSTABLE. BUILT FOR HALF CAGE PROGARD OR SETINA.

(FORWARD FACING GUN RACK, NOT MOUNTED IN 2ND ROW) WITH MAGLIGHT CHARGER

MOUNTED.

1 SINGLE RIFLE MOUNT

Y N 12 STALKER DSR RADAR UNIT WITH CABLES AND MOUNTING HARDWARE INSTALL UPFITTER TO SUPPLY SINGLE ANTENNA STYLE RADAR UNIT. MOUNT AS 1 UNIT ON DASH 1 DASH MOUNT RADAR

UNIT

Y N 13 SINGLE ANTENNA RADAR UNIT INSTALL 1 DASH MOUNT RADAR

ANTENNA

Y N 14 SINGLE PRISONER CMPT, PRO-CELL PRISONER TRANSPORT SYSTEM, 1/2 PARTITION W/OUTBOARD SEAT BELTS - WITH POLY WINDOW GUARDS, POLY BARRIER WITH POLY IN PARTITION 1 ½ CAGE PRISONER

COMPARTMENT

Y N 15 RECESSED PANEL UTILITY 1 RECESSED PANEL

Y N 16 CHARCOAL GREY ABS, FLOOR PAN 1 FLOOR PAN

Y N 17 V DRAIN, FOR USE WITH FLOOR PANS. REDUCE TO ONE DRAIN IF REQUIRED BASED ON BUILD

LIMITATIONS 2 FLOOR DRAINS

Y N 18 LED PUCK LIGHT, RECESSED, COOL WHITE. OR WHELEN STRIP-LITE PLUS SERIES 2 PRISONER LIGHT

Y N 19 GRAPHICS PACKAGE FOR CHEYENNE POLICE 1 GRAPHICS PACKAGE

BUILD SPECIFIC ADD ONS - PATROL - HALF CAGE - ADDENDUM ONE REVISED

END - BUILD SPECIFIC ADD ONS - PATROL - HALF CAGE

BUILD SPECIFIC ADD ONS - SERGEANT - MARKED

Y N 1

51" FEDERAL SIGNAL VALOR, MULTI COLOR LIGHTBAR. RED/WHITE DRIVER SIDE, BLUE/WHITE PASSENGER SIDE, RED/AMBER BLUE/AMBER REAR. NO HOT FOOT, HOOK MOUNTING, FULL FLOOD

WITH CORNER CUT OUT. OR EQUIVALENT SOUNDOFF SIGNAL NFORCE NXT NEXUS TECHNOLOGY

EXTERIOR FULL SIZE LIGHTBAR 54”.

1 EXTERIOR LIGHT

BAR

Y N 2 HOOK KIT, FOR UTILITY 1 HOOK KIT

Y N 3 SEALED ELBOW CONNECTOR 1 ROOF CONNECTION

Y N 4 NUT FOR SEALED PG 13.5 CONNECTOR 1 NUT FOR

CONNECTOR

Y N 5 IPX633 SERIES, FEDERAL SIGNAL, 1 LIGHT HOUSING, RED, BLUE, WHITE TRI COLOR LED (FORWARD

FACING) 2 TRI COLOR / FRONT

BUMPER LTS

Y N 6 FEDERAL SIGNAL MICROPULSE ULTRA, RED/WHITE DUAL COLOR WITH 2 INPUTS, 6 LED (MOUNTED

@ 45 DEGREE ANGLE) 1 D.S. SIDE OF PUSH

BUMPER

Y N 7 FEDERAL SIGNAL MICROPULSE ULTRA LED LIGHT. DUAL COLOR, BLUE/WHITE (MOUNTED @ 45

DEGREE ANGLE 1 P.S. SIDE OF PUSH

BUMPER

Y N 8 FEDERAL/WESTIN/SETINA PUSH BUMPER 1 PUSH BUMPER

Y N 9 2-LIGHT TOP CHANNEL FOR UTILITY/SEDAN FOR PBX05 BUMPER WITH IPX6 LIGHTS 1 LIGHT CHANNEL FOR

BUMPER

Y N 10 WIRE COVERS FOR USE WITH PBX05 BUMPER 1 SIDE WIRE COVERS

Y N 11 SINGLE RIFLE RACK, FULLY ADJUSTABLE. FREESTANDING WITH MAGLIGHT CHARGER MOUNTED. 1 SINGLE RIFLE

MOUNT

Y N 12 GRAPHICS PACKAGE FOR CHEYENNE POLICE 1 GRAPHICS PACKAGE

BUILD SPECIFIC ADD ONS - SERGEANT - MARKED ADDENDUM ONE REVISED (NO CHANGES)

END - BUILD SPECIFIC ADD ONS - SERGEANT - MARKED