DWGs 2 - 24257.pdf
PDF 23 MB Posted
- Solicitation number
- RFQ-171-250000000574-2
- Issued by
- Wayne County, Flint City, Michigan
About this file
These documents are mechanical demolition and new installation plans for multiple buildings at a state facility, prepared by the State of Michigan Department of Technology, Management and Budget (DTMB), State Facilities Administration, Design and Construction Division. The project involves comprehensive mechanical system upgrades across Buildings 100-1200, including mechanical demolition and new mechanical installations. The plans cover second floor and upper level mechanical spaces, detailing the removal of existing HVAC equipment, supply fans, dampers, water heaters, boilers, and associated piping and controls. The project scope includes reinstalling salvaged components, installing new DDC damper actuators, sensors, and integrating new equipment with existing control systems. The contract documents are dated 7/28/2025 and include detailed mechanical floor plans for each building, with specific notes on demolition and installation procedures.
The mechanical upgrade project appears to be funded through the state's capital improvement budget, with a focus on modernizing and standardizing mechanical systems across multiple buildings. The plans emphasize maintaining existing building warranties, integrating new equipment with the current JCI Metasys building automation system, and ensuring minimal disruption to existing infrastructure. Contractors are required to provide all necessary control components, verify existing dimensions before ordering equipment, and follow manufacturer installation instructions. The project includes installing new boilers, indirect domestic water heaters, supply fans, dampers, and associated control systems, with specific requirements for roof penetrations, concrete pad extensions, and control panel integration.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UP
X-SF-5
X-EF-12X-12x8 EA X-12x8
EA DN
X-UH-1
X-UH-4
X-EF-7
M
X-EH-5
(LOCATED
ON ROOF)
X-SF-411 X-SF-3 X-SF-2 X-SF-1X-XT-1
X-P-1
X-P-2
X-P-3
X-P-4
X-EF-11
X-16x8 EA
X-16x8
EA DN
X-UH-3
X-UH-2
X-12x8 EA X-12x8
EA DN
X-EF-10
X-EF-9
M
X-EH-4
(LOCATED
ON ROOF)
X-DAC-1
M
X-708x152 OA
X-56" PLENUM
X-AHU-4
X-RF-3
EA UP
TO X-EH-3
X-20x18
RA DN
X-20x18
SA DN
X-20x18 RA
X-20x18 SA
X-AHU-3
X-30x30
SA DN
X-30x30 SA
M
X-AHU-2
EA UP
TO X-EH-2
X-46x34 RA
X-RF-2
X-50x38 RA
X-32x50
RA
X-32x50 RA
X-46x34
SA DN
X-30x16 SA
X-30x16 SAX-30x16 SA X-30x16 SAX-30x14 SA
X-46x34 SA
X-42x34 SA
X-46x34 SA
X-24x20
SA DN
X-24x20
SA DN
X-42x24 SAX-40x20 SA X-24x20
SA DN
X-24x20
SA DN
X-20x20 SA
X-20x20
SA DN
X-RF-1
X-26x26 RA X-26x26 RA
X-26x26 RA
X-AHU-1
M
EA UP
TO X-EH-1
X-180x152 OA
X-56" PLENUM
X-26x26 RA X-14x22
SA DN,
ZONE 8
X-6x22 SA DN, ZONE 7
X-16x18
SA DN,
ZONE 1
X-8x18 SA DN, ZONE 5
X-8x22 SA DN, ZONE 2
X-8x22 SA DN, ZONE 4
X-6x22 SA DN, ZONE 3
X-8x22 SA DN, ZONE 6
X-680x56 LOUVER
X-LOUVER X-LOUVER
M
M
X-WATER
SOFTENER
X-IT RACK
X-COND
X-CONDENSER RAIL
X-CONDENSER RAIL
M
M
M
X-P-6
X-P-6
X-LOUVER
M
M
M
1 1
MMM
M
M
M
M
M
M
T
X-SF-5 X-UH-4
T
T
X-UH-3
T X-SF-4
T
X-UH-2
T
X-SF-3
T
X-UH-1
CU-200-1
CU-200-1 CU-200-2
X-AHU-1 & X-RF-1
DDC CONTROL
PANEL
X-AHU-2 & X-RF-2
DDC CONTROL
PANEL
X-AHU-3 DDC
CONTROL PANEL
X-AHU-4 & X-RF-3 DDC
CONTROL PANEL
CC-200-1
M
EPO SWITCH
EPO SWITCH
M
M
M
MULTIZONE DAMPER
ACTUATOR(S), 8 ACTUATORS
M
M
MISC. EQUIPMENT
DDC CONTROL
PANEL
CU-200-3
4" CONCRETE
PAD (TYP.)
M 1 1
M
1 1 1 1
M
M
X-DWH-2 X-DWH-1X-DWH-4 X-DWH-3
X-CONCRETE
PAD
X-CONCRETE PAD
X-B-200-1
X-6" VTR & 4" CA
(TYP. 4)
X-B-200-2
X-B-200-3 X-B-200-4
X-8" VTR X-8" VTR
X-8" CA X-8" CA X-8" CA X-8" CA
X-8" VTRX-8" VTR
X-CONCRETE
PAD
S
DEMOLITION NOTES
EXISTING LOUVER TO REMAIN. DISCONNECT, REMOVE,
AND DEMO EXISTING SUPPLY FAN, DAMPER , AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING DAMPER
ACTUATOR, DDC CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RE-USED ON NEW
SUPPLY FAN AND DAMPER.
EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL ASSOCIATED
ACCESSORIES IN THEIR ENTIRETY. DISCONNECT,
REMOVE, AND SALVAGE EXISTING DAMPER ACTUATOR,
DDC CONTROLS, CONTROL WIRING, AND ALL ASSOCIATED
ACCESSORIES TO BE RE-USED ON NEW DAMPER.
DISCONNECT, REMOVE, AND SALVAGE EXISTING FIN TUBE
LOOP WATER TEMPERATURE SENSOR, CONTROLS,
CONTROL WIRING, AND ALL ASSOCIATED ACCESSORIES
TO BE RELOCATED IN LOCATION SHOWN ON NEW
DRAWING. MODIFY EXISTING PIPING AS REQUIRED TO
SALVAGE AND RELOCATE SENSOR.
DISCONNECT, REMOVE AND DEMO EXISTING DOMESTIC
WATER HEATER, COMBUSTION AIR INLET, VENT, AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY. PATCH
EXISTING ROOF PENETRATIONS AS REQUIRED TO MATCH
EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY
EXISTING ROOF WARRANTIES. EXISTING CONCRETE PAD
TO REMAIN.
M-303
BUILDING 200 SECOND
FLOOR PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 200 SECOND FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/4" = 1'-0"
0 1 5 10
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N
X-12x6
SA
X-SD 350
12"ø ---
X-22x18 SA X-24x18 SA
X-14x6
SA
X-RG ---
X-28x18 RA
X-FTR
X-RG 4600
X-VAV-301-29
T
DEMOLITION NOTES
1 EXISTING FIN TUBE, CONTROL VALVE, AND ALL
ASSOCIATED ACCESSORIES TO REMAIN.
DISCONNECT, REMOVE, AND DEMO EXISTING
CONTROL WIRING TO THE EXTENTS SHOWN.
CONNECT FIN TUBE AND CONTROL VALVE TO
NEW SENSOR SHOWN ON NEW DRAWING.
M-304
BUILDING 300 FIRST FLOOR
PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 300 FIRST FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/4" = 1'-0"
0 1 5 10
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O F
M
IC
H
IG
A N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
X-48x48 LOUVERX-UH-1
X-SF-2
X-30x48 LOUVER X-72x48 LOUVER
X-SF-1
M
X-IH-6
(LOCATED
ON ROOF)
X-EH-2
(LOCATED
ON ROOF)
M
M
M
X-RF-4
X-24x24 RA
X-33" RA
X-33"
RA
X-24x24 RA
X-26" RA
X-24x24 SA
X-AHU-4
X-24x24 SA
X-30x20 SA
X-26" SA
X-AHU-3
M
M X-96x40
RA
X-42x24 SA UP
TO X-IH-4
X-96x54 SA UP
TO X-IH-3
M
X-44x36
RA
M
X-44x40 EA
X-194x48 LOUVER
X-44x40
RA
X-RF-3
X-42x42 RA DN
X-42" RA
X-44x30
RA DN
M
X-EH-1
(LOCATED
ON ROOF)
X-AHU-5X-AHU-2
M
X-36x20 SA UP
TO X-IH-5
X-22x18
SA DN
X-22x18
RA DN
X-36x20 SA UP
TO X-IH-2
M
M
X-RF-2
X-22x18
SA DN
X-22x18 SA
X-22x18 RA
X-22x18
RA
X-30x48 LOUVER
M
X-22x18
SA DN
X-22x18
SA
X-22x18 EA
X-P-11X-P-10
X-7" VTR
X-DWH-2
X-7" VTR
X-DWH-1
X-UH-2
X-AHU-1
X-30x20 RA
X-26" SA
X-26" RA
X-24X24 RA
X-RF-1
X-30x48 LOUVER
X-33" RA
X-36x30 SA UP
TO X-IH-1
M
M
X-CHEMICAL
POT FEEDER
X-IT RACK X-CONCRETE
PAD
X-CONDENSOR RAIL X-CONDENSOR RAIL
M
X-P-1 X-P-2
M
M
M
M
M
M
M M
X-IH-6
(LOCATED
ON ROOF)
CU-300-1
T
X-SF-2
T
X-UH-2
T
X-SF-1
T
X-UH-1
T
X-SF-2
T
X-UH-2
T
X-SF-1
T
X-UH-1
X-SF-2
X-UH-2 X-SF-1
X-UH-1
6" VTR
(TYP. 4)
4" CA VTR
(TYP. 4)
X-AHU-1 & X-RF-1
CONTROL PANEL
X-AHU-2 & X-RF-2
CONTROL PANEL
X-AHU-5
CONTROL PANEL
X-AHU-3 & X-RF-3
CONTROL PANEL
MISC. EQUIPMENT
CONTROL PANEL
X-AHU-4 & X-RF-4
CONTROL PANEL
CC-300-1
CONCRETE
PAD
EPO SWITCH
EPO SWITCH
M
B-300-1
B-300-2
B-300-3
B-300-4
3S
DEMOLITION NOTESDEMOLITION NOTES
1 EXISTING LOUVER TO REMAIN. DISCONNECT, REMOVE,
AND DEMO EXISTING SUPPLY FAN, DAMPER , AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
DAMPER ACTUATOR, DDC CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES TO BE
RE-USED ON NEW SUPPLY FAN AND DAMPER.
EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL ASSOCIATED
ACCESSORIES IN THEIR ENTIRETY. DISCONNECT,
REMOVE, AND SALVAGE EXISTING DAMPER ACTUATOR,
DDC CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RE-USED ON NEW
DAMPER.
DISCONNECT, REMOVE, AND SALVAGE EXISTING FIN
TUBE LOOP WATER TEMPERATURE SENSOR,
CONTROLS, CONTROL WIRING, AND ALL ASSOCIATED
ACCESSORIES TO BE RELOCATED IN LOCATION
SHOWN ON NEW DRAWING. MODIFY EXISTING PIPING
AS REQUIRED TO SALVAGE AND RELOCATE SENSOR.
GENERAL DEMOLITION NOTES
1. EXISTING MECHANICAL EQUIPMENT AND ALL ASSOCIATED ACCESSORIES TO
REMAIN UNLESS OTHERWISE NOTED.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O F
M
IC
H
IG
A N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-305
BUILDING 300 SECOND
FLOOR PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 300 SECOND FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/4" = 1'-0"
0 1 5 10
UP
UP
M-306
X-LOUVER
X-UH-1 X-EH-1
X-SF-1
T T
M
X-IT RACK
M
X-40x16
3 F/S
S
X-24x24 LOUVER
X-SF-2
X-UH-2
X-P-1X-P-2
X-52x32 LOUVER X-78x48 LOUVER
X-AHU-1
M
X-66x14 EA
UP TO X-EH-3
M
X-EH-2
X-RF-1
X-28x14 RA
M
X-24x24 SA, ZONE 2
X-11x10 SA, ZONE 1
X-12x8 SA, ZONE 3
X-12x6 SA, ZONE 4 X-18x12 SA, ZONE 5
X-20x12 SA, ZONE 8
X-12x10 SA, ZONE 7
X-16x8 SA, ZONE 6
X-CONCRETE PAD
M
M
X-P-4 X-P-9
M
T
T
X-UH-2
T
X-UH-2
X-SF-2 & X-EH-2
B-400-1
B-400-2
4'' CA VTR
(TYP.)
6'' VTR
(TYP.)
MISC. EQUIPMENT DDC
CONTROL PANEL
AHU-1 DDC CONTROL
PANEL
EPO SWITCH MULTIZONE DAMPER
ACTUATOR (8), 8
ACTUATORS
RELIEF & RA DAMPER
ACTUATOR (BELOW)
X-DWH-2
X-DWH-1
X-8" VTR
& CA5
X-8" VTR
& CA5
X-CONCRETE
PAD5
DEMOLITION NOTESDEMOLITION NOTES
1 EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
DAMPER ACTUATOR, DDC CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES TO
BE RE-USED ON NEW DAMPER.
EXISTING LOUVER TO REMAIN. DISCONNECT,
REMOVE, AND DEMO EXISTING SUPPLY FAN,
DAMPER , AND ALL ASSOCIATED ACCESSORIES IN
THEIR ENTIRETY. DISCONNECT, REMOVE, AND
SALVAGE EXISTING DAMPER ACTUATOR, DDC
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RE-USED ON
NEW SUPPLY FAN AND DAMPER.
EXISTING COMBINATION FIRE/SMOKE DAMPER
AND ALL ASSOCIATED ACCESSORIES TO REMAIN.
MODIFY AS SHOWN ON NEW DRAWINGS.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
FIN TUBE LOOP WATER TEMPERATURE SENSOR,
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RELOCATED IN
LOCATION SHOWN ON NEW DRAWING. MODIFY
EXISTING PIPING AS REQUIRED TO SALVAGE AND
RELOCATE SENSOR.
DISCONNECT, REMOVE AND DEMO EXISTING
DOMESTIC WATER HEATER, COMBUSTION AIR
INLET, VENT, AND ALL ASSOCIATED
ACCESSORIES IN THEIR ENTIRETY. PATCH
EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND
MAINTAIN ANY EXISTING ROOF WARRANTIES.
EXISTING CONCRETE PAD TO REMAIN.
GENERAL DEMOLITION NOTES
1. EXISTING MECHANICAL EQUIPMENT AND ALL ASSOCIATED ACCESSORIES TO
REMAIN UNLESS OTHERWISE NOTED.
2. CONTRACTOR TO PATCH EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O F
M
IC
H
IG
A N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-306
BUILDING 400 UPPER LEVEL
FLOOR PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 400 UPPER LEVEL FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/8" = 1'-0"
0 1 5 10 20
1 BUILDING 400 MECHANICAL ROOM - MECHANICAL DEMOLITION
UP
UPUP
UP
M-307
M
X-LOUVER
X-SF-1
X-UH-1
X-EH-1
M
X-IT RACK
T T
X-TG 550
--- TYP. 2
X-TG 440
--- TYP. 2
X-TG 350
--- TYP. 2
X-22x10 SA X-22x8 SA X-18x10 SAX-22x10 SA 3 3 3
F/S F/S F/S F/S
4S S
X-UH-2
X-78x48
LOUVER
M
X-24x24
LOUVER
X-SF-2
X-AHU-1
M X-42x18 SA
UPX-EH-2
X-P-1 X-P-2
M
X-18x10 SA, ZONE 1
X-10x8 SA, ZONE 2
X-10x10 SA, ZONE 4
X-CONCRETE
PAD
M
X-10x8 SA, ZONE 3
X-P-4
TX-UH-1
T
X-SF-2 & X-EH-2
B-500-2 B-500-1
MISC. EQUIPMENT DDC
CONTROL PANEL
X-AHU-1 DDC CONTROL
PANEL
4'' CA VTR
(TYP.)
6'' VTR (TYP.)
EPO SWITCH
MULTIZONE DAMPER
ACTUATOR(S), 4 ACTUATORS
X-DWH-2
X-8" VTR
& CA
X-8" VTR
& CA
X-DWH-1
X-CONCRETE PAD
DEMOLITION NOTESDEMOLITION NOTES
1 EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
DAMPER ACTUATOR, DDC CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES TO
BE RE-USED ON NEW DAMPER.
EXISTING LOUVER TO REMAIN. DISCONNECT,
REMOVE, AND DEMO EXISTING SUPPLY FAN,
DAMPER , AND ALL ASSOCIATED ACCESSORIES IN
THEIR ENTIRETY. DISCONNECT, REMOVE, AND
SALVAGE EXISTING DAMPER ACTUATOR, DDC
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RE-USED ON
NEW SUPPLY FAN AND DAMPER.
EXISTING COMBINATION FIRE/SMOKE DAMPER
AND ALL ASSOCIATED ACCESSORIES TO REMAIN.
MODIFY AS SHOWN ON NEW DRAWINGS.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
FIN TUBE LOOP WATER TEMPERATURE SENSOR,
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RELOCATED IN
LOCATION SHOWN ON NEW DRAWING. MODIFY
EXISTING PIPING AS REQUIRED TO SALVAGE AND
RELOCATE SENSOR.
DISCONNECT, REMOVE AND DEMO EXISTING
DOMESTIC WATER HEATER, COMBUSTION AIR
INLET, VENT, AND ALL ASSOCIATED
ACCESSORIES IN THEIR ENTIRETY. PATCH
EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND
MAINTAIN ANY EXISTING ROOF WARRANTIES.
EXISTING CONCRETE PAD TO REMAIN.
GENERAL DEMOLITION NOTES
1. EXISTING MECHANICAL EQUIPMENT AND ALL ASSOCIATED ACCESSORIES TO
REMAIN UNLESS OTHERWISE NOTED.
2. CONTRACTOR TO PATCH EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O F
M
IC
H
IG
A N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-307
BUILDING 500 UPPER LEVEL
FLOOR PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 500 UPPER LEVEL FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/8" = 1'-0"
0 1 5 10 201 BUILDING 500 MECHANICAL ROOM - MECHANICAL DEMOLITION
UP UP
M-308
X-10x18 SA
X-10x18 SA
X-24x18 SA
X-30x18
RA
X-26x20
RA
X-10x16 SA
X-10x24 SA
X-26x20 RA
X-24x18 SA
X-30x18 RA
F/S
F/S
F/S
F/S
F/S
F/S
F/S
X-SD 300
X-SD 50
4"ø ---
X-12x6 SA
X-6x4 SA
2 F/S
B-600-2
X-24x24 LOUVER
X-EF-1
X-UH-2
X-24x24 LOUVER
X-EF-2
X-30"x18 SA
UP TO X-IH-7
M
X-48x48 LOUVER
X-48x48 LOUVER
X-48x48 LOUVER
X-UH-1
X-RF-1
X-26x20 RA
M
X-30x24 RA
X-RF-2
X-30x18 RA
M
X-30x24 RA
X-RF-3
X-26x20 RA MX-30x24 RA
X-20" VTR
X-30x24 SA
X-AHU-1
M
M X-48x48 SA UP
TO X-IH-1
X-30x24 SA
X-AHU-2
M
M X-48x48 SA UP
TO X-IH-2
X-24x18 SA
X-24x18 SA
X-30x18 DUCT
UP (CAPPED)
TO X-IH-4
M
X-30x24 RAX-AHU-3
M
X-36x48 SA UP
TO X-IH-3
X-10x16 SA, ZONE 5
X-10x24 SA, ZONE 4
X-10x24 SA, ZONE 1
X-10x14 SA, ZONE 2X-10x18 SA, ZONE 3
X-20x12 SA
M
X-24x30 SA UP
TO X-IH-5
M
X-12x30 CA DN
X-P-1
X-P-2
X-CONCRETE
PAD
X-IT RACK
M
X-24x18 SA
X-24x18 SA
X-HC-4
X-HC-3
X-HC-2
X-HC-1
X-P-9
MISC. EQUIPMENT DDC
CONTROL PANEL
X-AHU-2 DDC CONTROL
PANEL
T T
X-UH-2 X-EF-1
B-600-1
X-AHU-3 DDC CONTROL PANEL
X-AHU-1 DDC CONTROL
PANEL
T
T
MULTIZONE DAMPER
ACTUATOR(S), 5 ACTUATORS
EPO SWITCH
X-DWH-2
X-XT
X-CONCRETE
PAD X-8" VTR
& CA
X-DWH-1
X-8" VTR
& CA
S
DEMOLITION NOTESDEMOLITION NOTES
1 EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
DAMPER ACTUATOR, DDC CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES TO
BE RE-USED ON NEW DAMPER.
EXISTING COMBINATION FIRE/SMOKE DAMPER
AND ALL ASSOCIATED ACCESSORIES TO REMAIN.
MODIFY AS SHOWN ON NEW DRAWINGS.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
FIN TUBE LOOP WATER TEMPERATURE SENSOR,
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RELOCATED IN
LOCATION SHOWN ON NEW DRAWING. MODIFY
EXISTING PIPING AS REQUIRED TO SALVAGE AND
RELOCATE SENSOR.
DISCONNECT, REMOVE AND DEMO EXISTING
DOMESTIC WATER HEATER, EXPANSION TANK,
COMBUSTION AIR INLET, VENT, AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
PATCH EXISTING ROOF PENETRATIONS AS
REQUIRED TO MATCH EXISTING, SEAL
WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES. EXISTING CONCRETE PAD TO
REMAIN.
GENERAL DEMOLITION NOTES
1. EXISTING MECHANICAL EQUIPMENT AND ALL ASSOCIATED ACCESSORIES TO
REMAIN UNLESS OTHERWISE NOTED.
2. CONTRACTOR TO PATCH EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-308
BUILDING 600 UPPER LEVEL
FLOOR PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 600 UPPER LEVEL FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/8" = 1'-0"
0 1 5 10 20
1 BUILDING 600 MECHANICAL ROOM - MECHANICAL DEMOLITION
UPUP
UP
UP
UP
M-309
X-EH-1
X-UH-1 M
X-LOUVER
X-SF-1
X-IT RACK
M
T T
X-TG 800
--- TYP. 2 X-TG 500
--- TYP. 2
X-22x12 RA X-22x12 RA X-22x8 RA
X-TG 800
--- TYP. 2
3 3 3
F/S F/S F/S F/S
X-16x12 SA
SS
X-CONCRETE
PAD
X-20x48
LOUVERM
X-20x24 SA
DN TO 6" AFF
M
X-AHU-1
X-EH-2
X-42x42
LOUVER
M X-12x42
LOUVER
X-14x18 SA, ZONE 4
X-12x8 SA, ZONE 2
X-16x12 SA, ZONE 1
X-UH-2
X-24x24
LOUVER
X-SF-2
X-P-2 X-P-1
M
X-14x18 SA, ZONE 3
X-P-4
1T
X-UH-2
T
X-SF-2 & X-EH-2
B-700-1 B-700-2
6'' VTR
4'' CA VTR 6'' VTR
4'' CA VTR
MISC. EQUIPMENT DDC
CONTROL PANEL
X-AHU-1 DDC CONTROL
PANEL
MULTIZONE DAMPER
ACTUATOR(S), 4 ACTUATORS
EPO SWITCH
M2
X-DWH-2
X-8" VTR
& CA
X-8" VTR
& CA
X-DWH-1
X-CONCRETE PAD 5
X-DWH-3
X-8" VTR
& CA
DEMOLITION NOTESDEMOLITION NOTES
1 EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
DAMPER ACTUATOR, DDC CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES TO
BE RE-USED ON NEW DAMPER.
EXISTING LOUVER TO REMAIN. DISCONNECT,
REMOVE, AND DEMO EXISTING SUPPLY FAN,
DAMPER , AND ALL ASSOCIATED ACCESSORIES IN
THEIR ENTIRETY. DISCONNECT, REMOVE, AND
SALVAGE EXISTING DAMPER ACTUATOR, DDC
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RE-USED ON
NEW SUPPLY FAN AND DAMPER.
EXISTING COMBINATION FIRE/SMOKE DAMPER
AND ALL ASSOCIATED ACCESSORIES TO REMAIN.
MODIFY AS SHOWN ON NEW DRAWINGS.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
FIN TUBE LOOP WATER TEMPERATURE SENSOR,
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RELOCATED IN
LOCATION SHOWN ON NEW DRAWING. MODIFY
EXISTING PIPING AS REQUIRED TO SALVAGE AND
RELOCATE SENSOR.
DISCONNECT, REMOVE AND DEMO EXISTING
DOMESTIC WATER HEATER, COMBUSTION AIR
INLET, VENT, AND ALL ASSOCIATED
ACCESSORIES IN THEIR ENTIRETY. PATCH
EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND
MAINTAIN ANY EXISTING ROOF WARRANTIES.
DISCONNECT, REMOVE, AND DEMO EXISTING
CONCRETE PAD TO EXTENTS SHOWN. EXISTING
CONCRETE PAD TO OVERLAP NEW EQUIPMENT
AT LEAST 4" IN ALL DIRECTIONS.
GENERAL DEMOLITION NOTES
1. EXISTING MECHANICAL EQUIPMENT AND ALL ASSOCIATED ACCESSORIES TO
REMAIN UNLESS OTHERWISE NOTED.
2. CONTRACTOR TO PATCH EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O F
M
IC
H
IG
A N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-309
BUILDING 700 UPPER LEVEL
FLOOR PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 700 UPPER LEVEL FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/8" = 1'-0"
0 1 5 10 20
1 BUILDING 700 MECHANICAL ROOM - MECHANICAL DEMOLITION
M-310
X-EH-1
X-UH-1 M
X-LOUVER
X-SF-1
X-IT RACK
M
T T
X-TG 800
--- TYP. 2 X-TG 500
--- TYP. 2
X-22x12 RA X-22x12 RA X-22x8 RA
X-TG 800
--- TYP. 2
3 3 3
F/S F/S F/S F/S
X-16x12 SA
SS
UPUP
UP
UP
UP
UP
X-CONCRETE
PAD
X-20x48
LOUVERM
X-20x24 SA
DN TO 6" AFF
M
X-AHU-1
X-EH-2
X-42x42
LOUVER
M X-12x42
LOUVER
X-14x18 SA, ZONE 4
X-12x8 SA, ZONE 2
X-16x12 SA, ZONE 1
X-UH-2
X-24x24
LOUVER
X-SF-2
X-P-2 X-P-1
M
X-14x18 SA, ZONE 3
X-P-4
1T
X-UH-2
T
X-SF-2 & X-EH-2
B-800-1 B-800-2
6'' VTR
4'' CA VTR 6'' VTR
4'' CA VTR
MISC. EQUIPMENT DDC
CONTROL PANEL
X-AHU-1 DDC CONTROL
PANEL
MULTIZONE DAMPER
ACTUATOR(S), 4 ACTUATORS
EPO SWITCH
M2
X-DWH-2
X-8" VTR
& CA
X-8" VTR
& CA
X-DWH-1
X-CONCRETE PAD 5
X-DWH-3
X-8" VTR
& CA
DEMOLITION NOTESDEMOLITION NOTES
1 EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
DAMPER ACTUATOR, DDC CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES TO
BE RE-USED ON NEW DAMPER.
EXISTING LOUVER TO REMAIN. DISCONNECT,
REMOVE, AND DEMO EXISTING SUPPLY FAN,
DAMPER , AND ALL ASSOCIATED ACCESSORIES IN
THEIR ENTIRETY. DISCONNECT, REMOVE, AND
SALVAGE EXISTING DAMPER ACTUATOR, DDC
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RE-USED ON
NEW SUPPLY FAN AND DAMPER.
EXISTING COMBINATION FIRE/SMOKE DAMPER
AND ALL ASSOCIATED ACCESSORIES TO REMAIN.
MODIFY AS SHOWN ON NEW DRAWINGS.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
FIN TUBE LOOP WATER TEMPERATURE SENSOR,
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RELOCATED IN
LOCATION SHOWN ON NEW DRAWING. MODIFY
EXISTING PIPING AS REQUIRED TO SALVAGE AND
RELOCATE SENSOR.
DISCONNECT, REMOVE AND DEMO EXISTING
DOMESTIC WATER HEATER, COMBUSTION AIR
INLET, VENT, AND ALL ASSOCIATED
ACCESSORIES IN THEIR ENTIRETY. PATCH
EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND
MAINTAIN ANY EXISTING ROOF WARRANTIES.
DISCONNECT, REMOVE, AND DEMO EXISTING
CONCRETE PAD TO EXTENTS SHOWN. EXISTING
CONCRETE PAD TO OVERLAP NEW EQUIPMENT
AT LEAST 4" IN ALL DIRECTIONS.
GENERAL DEMOLITION NOTES
1. EXISTING MECHANICAL EQUIPMENT AND ALL ASSOCIATED ACCESSORIES TO
REMAIN UNLESS OTHERWISE NOTED.
2. CONTRACTOR TO PATCH EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-310
BUILDING 800 UPPER LEVEL
FLOOR PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 800 UPPER LEVEL FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/8" = 1'-0"
0 1 5 10 20
1 BUILDING 800 MECHANICAL ROOM - MECHANICAL DEMOLITION
M-311
X-EH-1
X-UH-1 M
X-LOUVER
X-SF-1
X-IT RACK
M
T T
X-TG 800
--- TYP. 2 X-TG 500
--- TYP. 2
X-22x12 RA X-22x12 RA X-22x8 RA
X-TG 800
--- TYP. 2
3 3 3
F/S F/S F/S F/S
X-16x12 SA
SS
UPUP
UP
UP
UP
UP
X-CONCRETE
PAD
X-20x48
LOUVERM
X-20x24 SA
DN TO 6" AFF
M
X-AHU-1
X-EH-2
X-42x42
LOUVER
M X-12x42
LOUVER
X-14x18 SA, ZONE 4
X-12x8 SA, ZONE 2
X-16x12 SA, ZONE 1
X-UH-2
X-24x24
LOUVER
X-SF-2
X-P-2 X-P-1
M
X-14x18 SA, ZONE 3
X-P-4
1T
X-UH-2
T
X-SF-2 & X-EH-2
B-900-1 B-900-2
6'' VTR
4'' CA VTR 6'' VTR
4'' CA VTR
MISC. EQUIPMENT DDC
CONTROL PANEL
X-AHU-1 DDC CONTROL
PANEL
MULTIZONE DAMPER
ACTUATOR(S), 4 ACTUATORS
EPO SWITCH
M2
X-DWH-2
X-8" VTR
& CA
X-8" VTR
& CA
X-DWH-1
X-CONCRETE PAD 5
X-DWH-3
X-8" VTR
& CA
DEMOLITION NOTESDEMOLITION NOTES
1 EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
DAMPER ACTUATOR, DDC CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES TO
BE RE-USED ON NEW DAMPER.
EXISTING LOUVER TO REMAIN. DISCONNECT,
REMOVE, AND DEMO EXISTING SUPPLY FAN,
DAMPER , AND ALL ASSOCIATED ACCESSORIES IN
THEIR ENTIRETY. DISCONNECT, REMOVE, AND
SALVAGE EXISTING DAMPER ACTUATOR, DDC
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RE-USED ON
NEW SUPPLY FAN AND DAMPER.
EXISTING COMBINATION FIRE/SMOKE DAMPER
AND ALL ASSOCIATED ACCESSORIES TO REMAIN.
MODIFY AS SHOWN ON NEW DRAWINGS.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
FIN TUBE LOOP WATER TEMPERATURE SENSOR,
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RELOCATED IN
LOCATION SHOWN ON NEW DRAWING. MODIFY
EXISTING PIPING AS REQUIRED TO SALVAGE AND
RELOCATE SENSOR.
DISCONNECT, REMOVE AND DEMO EXISTING
DOMESTIC WATER HEATER, COMBUSTION AIR
INLET, VENT, AND ALL ASSOCIATED
ACCESSORIES IN THEIR ENTIRETY. PATCH
EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND
MAINTAIN ANY EXISTING ROOF WARRANTIES.
DISCONNECT, REMOVE, AND DEMO EXISTING
CONCRETE PAD TO EXTENTS SHOWN. EXISTING
CONCRETE PAD TO OVERLAP NEW EQUIPMENT
AT LEAST 4" IN ALL DIRECTIONS.
GENERAL DEMOLITION NOTES
1. EXISTING MECHANICAL EQUIPMENT AND ALL ASSOCIATED ACCESSORIES TO
REMAIN UNLESS OTHERWISE NOTED.
2. CONTRACTOR TO PATCH EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-311
BUILDING 900 UPPER LEVEL
FLOOR PLAN - MECHANICAL
DEMOLITION
DBP
CAT
N BUILDING 900 UPPER LEVEL FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/8" = 1'-0"
0 1 5 10 20
1 BUILDING 900 MECHANICAL ROOM - MECHANICAL DEMOLITION
UP
UPUP
UP
M-312
M
X-LOUVER
X-SF-1
X-UH-1
X-EH-1
M
X-IT RACK
T T
X-TG 550
--- TYP. 2
X-TG 440
--- TYP. 2
X-TG 350
--- TYP. 2
X-22x10 SA X-22x8 SA X-18x10 SAX-22x10 SA 3 3 3
F/S F/S F/S F/S
4S S
X-UH-2
X-78x48
LOUVER
M
X-24x24
LOUVER
X-SF-2
X-AHU-1
M X-42x18 SA
UPX-EH-2
X-P-1 X-P-2
M
X-18x10 SA, ZONE 1
X-10x8 SA, ZONE 2
X-10x10 SA, ZONE 4
X-CONCRETE
PAD
M
X-10x8 SA, ZONE 3
X-P-4
TX-UH-1
T
X-SF-2 & X-EH-2
B-1200-2 B-1200-1
MISC. EQUIPMENT DDC
CONTROL PANEL
X-AHU-1 DDC CONTROL
PANEL
4'' CA VTR
(TYP.)
6'' VTR (TYP.)
EPO SWITCH
MULTIZONE DAMPER
ACTUATOR(S), 4 ACTUATORS
X-DWH-2
X-8" VTR
& CA
X-8" VTR
& CA
X-DWH-1
X-CONCRETE PAD
DEMOLITION NOTESDEMOLITION NOTES
1 EXISTING RELIEF HOOD TO REMAIN. DISCONNECT,
REMOVE, AND DEMO DAMPER AND ALL
ASSOCIATED ACCESSORIES IN THEIR ENTIRETY.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
DAMPER ACTUATOR, DDC CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES TO
BE RE-USED ON NEW DAMPER.
EXISTING LOUVER TO REMAIN. DISCONNECT,
REMOVE, AND DEMO EXISTING SUPPLY FAN,
DAMPER , AND ALL ASSOCIATED ACCESSORIES IN
THEIR ENTIRETY. DISCONNECT, REMOVE, AND
SALVAGE EXISTING DAMPER ACTUATOR, DDC
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RE-USED ON
NEW SUPPLY FAN AND DAMPER.
EXISTING COMBINATION FIRE/SMOKE DAMPER
AND ALL ASSOCIATED ACCESSORIES TO REMAIN.
MODIFY AS SHOWN ON NEW DRAWINGS.
DISCONNECT, REMOVE, AND SALVAGE EXISTING
FIN TUBE LOOP WATER TEMPERATURE SENSOR,
CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES TO BE RELOCATED IN
LOCATION SHOWN ON NEW DRAWING. MODIFY
EXISTING PIPING AS REQUIRED TO SALVAGE AND
RELOCATE SENSOR.
DISCONNECT, REMOVE AND DEMO EXISTING
DOMESTIC WATER HEATER, COMBUSTION AIR
INLET, VENT, AND ALL ASSOCIATED
ACCESSORIES IN THEIR ENTIRETY. PATCH
EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND
MAINTAIN ANY EXISTING ROOF WARRANTIES.
EXISTING CONCRETE PAD TO REMAIN.
GENERAL DEMOLITION NOTES
1. EXISTING MECHANICAL EQUIPMENT AND ALL ASSOCIATED ACCESSORIES TO
REMAIN UNLESS OTHERWISE NOTED.
2. CONTRACTOR TO PATCH EXISTING ROOF PENETRATIONS AS REQUIRED TO
MATCH EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D E
P A
R T
M E
N T
O F
T E
C H
N O
L O
G Y
M
A N
A G
E M
E N
T A
N D
B U
D G
E T
S T
A T
E O
F M
IC
H
IG
A
N
A D
A M
P
L A
C H
R
A
D
IR
E C
T O
R
S T
A T
E F
A C
IL
IT
IE
S
A D
M
IN
IS
T
R A
T
IO
N
D E
S
IG
N A
N D
C O
N S
T R
U C
T
IO
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-312
BUILDING 1200 UPPER
LEVEL FLOOR PLAN -
MECHANICAL DEMOLITION
DBP
CAT
N BUILDING 1200 UPPER LEVEL FLOOR PLAN - MECHANICAL DEMOLITION
SCALE: 1/8" = 1'-0"
0 1 5 10 201 BUILDING 1200 MECHANICAL ROOM - MECHANICAL DEMOLITION
X-EF-2
X-LOUVER
X-72x24 EA DN
M
X-FTR
X-12x8 SAX-12x6 SA
X-SD 115
6" ---
X-RG 115
X-12x8
SA
X-SD 185
10" TYP. 2
X-VAV-101-11
D-100-11
HVAC KEY NOTES
INSTALL NEW DAMPER AND ALL ASSOCIATED
ACCESSORIES AT THE LOCATION SHOWN PER
THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS. RE-INSTALL EXISTING DAMPER
ACTUATOR, CONTROLS, CONTROL WIRING, AND
ALL ASSOCIATED ACCESSORIES ON THE NEW
DAMPER. CONTRACTOR TO PROVIDE ALL
REQUIRED COMPONENTS TO CONNECT EXISTING
ACTUATOR TO NEW DAMPER.
GENERAL MECHANICAL NOTES
1. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS REQUIRED TO
CONNECT NEW EQUIPMENT TO THE EXISTING DDC CONTROL PANEL AND JCI
METASYS BAS. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS
REQUIRED TO INTEGRATE ALL NEW EQUIPMENT INTO THE EXISTING
FRONT-END GRAPHICS.
2. CONTRACTOR TO INSTALL ALL NEW EQUIPMENT PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS AND MAINTAIN ALL REQUIRED SERVICE
CLEARANCES.
M-400
BUILDING 100 FIRST FLOOR
PLAN - MECHANICAL NEW
DBP
CAT
N BUILDING 100 FIRST FLOOR PLAN - MECHANICAL NEW
SCALE: 1/8" = 1'-0"
0 1 5 10 20
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
X-RF-1
M
X-UH-2
X-P-2
X-P-5
X-P-1
X-CHEMICAL POT FEEDER
X-DWH-1
X-7" VTR
X-UH-1
X-IH-1
(LOCATED
ON ROOF)
M
M
X-EH-2
(LOCATED
ON ROOF)M
X-EF-3
X-30x48 RA
X-240x72
LOUVER
X-32x108 EA UP
TO X-EH-1
X-36"
PLENUM
X-36x30
SA DN
X-40x40
SA DN
X-42x42 SA
X-36x50 SA
X-36x18 SA
M
X-44x24RA
X-48x24
RA DN
X-48x48 RA X-44x24 RA
X-AHU-1
UP
X-COND
X-CONCRETE
PAD
X-CONCRETE
PAD
X-P-3
M
M
M T
T
X-SF-1
X-UH-2
T
X-UH-1
CU-100-1
6'' CA VTR
8'' VTR
CC-100-1
X-AHU-1 & X-RF-1 DDC
CONTROL PANEL
MISC. EQUIPMENT
DDC CONTROL PANEL
6'' CA VTR
8'' VTR
EPO SWITCH
EPO SWITCH
RA DAMPER ACTUATOR
(BELOW)
M
D-100-2
D-100-3
SF-100-1 2
UP
UP
X-EF-4
T
M
X-LOUVER
(ABOVE CEILING)
T
M-401
D-100-4
HVAC KEY NOTES
INSTALL NEW DAMPER AND ALL ASSOCIATED
ACCESSORIES AT THE LOCATION SHOWN PER
THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS. RE-INSTALL EXISTING DAMPER
ACTUATOR, CONTROLS, CONTROL WIRING, AND
ALL ASSOCIATED ACCESSORIES ON THE NEW
DAMPER. CONTRACTOR TO PROVIDE ALL
REQUIRED COMPONENTS TO CONNECT EXISTING
ACTUATOR TO NEW DAMPER.
INSTALL NEW SUPPLY FAN, DAMPER, AND ALL
ASSOCIATED ACCESSORIES AT THE LOCATION
SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. CONTRACTOR TO
FIELD VERIFY DIMENSIONS FOR NEW DAMPER
PRIOR TO ORDERING. RE-INSTALL EXISTING
DAMPER ACTUATOR, CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES ON
NEW DAMPER AND SUPPLY FAN. CONTRACTOR
TO PROVIDE ALL REQUIRED COMPONENTS TO
CONNECT EXISTING ACTUATOR TO NEW DAMPER.
GENERAL MECHANICAL NOTES
1. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS REQUIRED TO
CONNECT NEW EQUIPMENT TO THE EXISTING DDC CONTROL PANEL AND JCI
METASYS BAS. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS
REQUIRED TO INTEGRATE ALL NEW EQUIPMENT INTO THE EXISTING
FRONT-END GRAPHICS.
2. CONTRACTOR TO INSTALL ALL NEW EQUIPMENT PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS AND MAINTAIN ALL REQUIRED SERVICE
CLEARANCES.
M-401
BUILDING 100 SECOND
FLOOR PLAN - MECHANICAL
NEW
DBP
CAT
N BUILDING 100 SECOND FLOOR PLAN - MECHANICAL NEW
SCALE: 1/8" = 1'-0"
0 1 5 10 20
1 BUILDING 100 MECHANICAL ROOM - MECHANICAL NEW
SCALE: 1/4" = 1'-0"
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
X-EF-3
X-EF-1
X-EF-14
X-EF-5
X-EF-4
X-EF-6
X-EF-2
X-EF-15
X-EF-8
X-EF-13
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-CUH-14
X-CUH-3
X-CUH-2
X-CUH-18
X-CUH-8
X-CUH-7 X-CUH-4
X-CUH-1
X-CUH-13
X-CUH-11
X-CUH-12
X-UH-6
X-UH-5
X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTR X-FTRX-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTRX-FTRX-FTRX-FTRX-FTRX-FTRX-FTRX-FTRX-FTRX-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTRX-FTR
X-FTR X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-FTR
X-10x6 SA
X-14x6 SA
X-12x8 SA
X-16x6 SAX-10x6 SA
X-18x10 SA
X-10x6 SA
X-20x10 SA
X-16x6 SA
X-16x10 SA
X-12x6 SA
X-20x10 SA X-12x6 SA
X-16x10 SA
X-12x6 SA
X-18x10 SA
X-12x12 SA
X-12x6 SAX-8x6 SA X-16x10 SA
X-8x6 SA
X-14x6 SA
X-12x8 SA
X-8x6 SA
X-8x6 SA
X-10x8 SA
X-10x6 SA X-8x6 SA
X-8x6 SA
X-8x6 SAX-16x10 SA
X-14x10 SA X-8x6 SA
X-8x6 SA
X-12x8 SA X-8x6 SA X-8x6 SA
X-8x8 SA
X-12x6 SA
X-12x6 SA
X-12x6 SA X-8x6 SA
X-8x6 SA
X-18x16 SA
X-18x10 SA
X-10x6 SA
X-18x22 SA
X-18x10 SA
X-18x10 SA
X-26x22 SA
X-18x10 SA
X-45x22 SA
X-34x16 SA
X-18x10 SA
X-18x10 SA
X-30x16
SA
X-22x16 SA X-24x16 SA
X-22x12 SA
X-10x6 SA
X-10x6 SA
X-18x10 SA
X-18x10 SA
X-22x6 SA
X-28x12 SA
X-24x12 SA
X-14x8 SA
X-14x6 SA
X-12x6 SA
X-10x6 SA X-8x6
SA
X-20x6 SA
X-20x12 SA X-16x10 SA
X-8x6 SA
X-16x10 SA
X-12x10 SA
X-10x6 SA
X-14x8 SA
X-14x6 SA
X-8x6 SA
X-10x6 SA X-8x6 SA
X-16x6 SA
X-18x8 SA
X-14x6 SA
X-14x10 SA X-12x10 SA X-12x10 SA
X-34x12 SA
X-18x10 SAX-16x6 SA
X-20x12 SA X-18x12 SA X-16x12 SA X-16x10 SA X-16x8 SA X-16x6 SA
X-16x6 SA X-16x6 SA
X-16x6 SAX-16x6 SAX-16x6 SA
X-8x6
SA (TYP.)
X-8x6 EA
(TYP.)
X-10x10 SA X-8x8 SA X-8x6 SAX-10x8 SA X-8x6 SA
X-10x6 SA X-10x8 SA
X-8x6 EA X-8x8 EA X-10x8 EA X-12x8 EA X-12x10 EA X-12x8 EA
X-10x8 EA X-8x8 EA X-8x6 EA
X-16x12 RA
X-32x12 OPEN
END RA
X-20x18 RA
& SA UP
X-22x12 OPEN
END RA
X-22x6 RA
18x6 OPEN
END RA
X-12x6 RA
X-12x8 RA
X-12x12
OPEN
END RA
X-22x12 OPEN
END RA
X-30x12 OPEN
END RA
X-12X8 OPEN
END RA
X-12X6 OPEN
END RA
X-18X10
OPEN END RA X-34X12 OPEN
END RA
X-12X12
OPEN END RA
X-20x12 RA
X-28x18 RA
X-10x12 RA
X-34x18 RA
X-8x6 RA
X-8x6 RA
X-48X12 OPEN
END RA
X-22x6 RA (TYP)
X-10X10 UP
TO X-EF-7
X-8x6 EA
X-8x6 EA X-14x6 EA
X-12x6 EA
X-8x8 EA
X-8x6 EA
X-8x8
EA
X-8x6 EA
X-6x6 EA
X-8x6 EA
X-8x8 EA
X-SD 360
14" TYP. 2
X-SD 200
8" TYP. 2
X-SD 200
8" ---
X-SD 240
8" ---
X-SD320
14"---
X-SD 240
10" ---
X-SD 80
6" TYP. 2
X-SD 85
6" TYP. 2
X-SD 75
6" ---
X-SD 150
7" ---
X-SD 85
6" TYP. 3
X-SD 100
6" TYP. 2
X-SD 80
6" TYP. 2
X-SD 105
6" ---
X-SD 85
6" ---
X-SD 200
8" TYP. 2
X-SD 330
12" ---
X-SD 215
10" ---
X-SD 165
8" --- X-SD 165
8" ---
X-SD 130
6" ---
X-SD 320
12" ---
X-SD 75
6" TYP. 4 X-SD 75
6" ---
X-SD 170
8" ---
X-SD 65
6" ---
X-SD 115
6" TYP. 3
X-SD 145
10" ---
X-SD 310
10" ---
X-SD 245
10" ---
X-SD 50
6" ---
X-SD 50
6" ---
X-SD 140
6" ---
X-SD 230
10" ---
X-SD 285
--- TYP. 4 X-SD 260
--- TYP. 3
X-SD 50
--- TYP. 18
X-EG 50
--- TYP. 18
X-EG 50
--- TYP. 4
X-EG 75
--- TYP. 2X-EG 235
X-EG 75
X-EG 120
--- TYP. 2
X-EG 75
--- TYP. 2X-EG 75
--- TYP. 2
X-EG 75
X-EG 500
X-12X8 UP
TO EF-10
X-SD 200
8" ---
X-SD 180
8" ---
X-45x22
SA UP
X-SD 840
15" TYP. 4
X-SD 840
15" TYP. 6
X-EG 220
X-EG 220
X-EG 410
X-RG 180
--- ---X-RG 215
X-RG 290
X-RG 180
--- TYP. 2
X-RG 215
X-RG 220
X-EG 75
X-RG 130
X-RG 235
X-RG 150
--- TYP. 2
X-RG 85
X-RG 85
--- TYP. 2
X-RG 260
X-RG 90
X-RG 145
X-RG 180
X-RG 200
24X24 UP
TO X-EF-9
X-RG 290
--- --- X-RG 150
X-RG 115
X-RG 650
X-RG 205
X-RG 120
X-RG 290
X-RG 65
--- TYP. 2
X-RG 190
X-RG 1140
X-RG 780
X-8x6 SA
X-EG 50
--- TYP. 2 X-EG 50
--- TYP. 2
X-SD 50
--- TYP. 2
X-SD 50
--- TYP. 2
X-26x26
RA UP
X-FTRX-EF-8
X-CUH-5X-CUH-6
X-EF-16
T
T
T
T
T
X-AHU-2
X-AHU-4
AC-200-2
T
AC-200-1
T
AC-200-3
T
S
S
S
S
X-AHU-3
S
X-AHU-1
(ZONE 1)
S
X-AHU-1
(ZONE 2)
X-AHU-1
(ZONE 3)
X-AHU-1
(ZONE 5)
X-AHU-1 (ZONE 7)
S
S
SS
X-AHU-1
(ZONE 4)
S
S
S
S
S
S
S
S S
S
X-AHU-1
(ZONE 6)
S
S
S
S
S
S
S
S
MANUAL SMOKE PURGE
KEYED SWITCH
DP
F/S F/S
F/S
F/S F/S F/S
F/S
F/S F/SF/SF/SF/S
F/SF/S
F/S
F/S
S
1 1
1 1 1
S
S
S S
S
T
X-AHU-1
(ZONE 8)
HVAC KEY NOTES
INSTALL NEW 24-VOLT FIRE/SMOKE DDC
DAMPER ACTUATOR, CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES
PER THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS IN THE LOCATIONS SHOWN. NEW
DDC ACTUATORS TO BE INSTALLED ON
EXISTING COMBINATION FIRE/SMOKE DAMPER.
PROVIDE ALL REQUIRED COMPONENTS TO
CONNECT NEW ACTUATOR ONTO EXISTING
DAMPER. CONNECT NEW DDC ACTUATOR TO
EXISTING FIRE ALARM SYSTEM.
INSTALL NEW FLAT PLATE SENSOR, CONTROL
WIRING, CONTROLS, AND ALL ASSOCIATED
ACCESSORIES IN THE LOCATION SHOWN PER
THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS. CONNECT NEW FLAT PLATE
SENSOR TO EXISTING DDC CONTROL PANEL
AND EXISTING JCI BAS. PROVIDE ALL
COMPONENTS REQUIRED TO INTEGRATE NEW
FLAT PLATE SENSOR ONTO THE EXISTING
FRONT-END GRAPHICS.
INSTALL NEW DUCT MOUNTED SENSOR,
CONTROL WIRING, CONTROLS, AND ALL
ASSOCIATED ACCESSORIES IN THE LOCATION
SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. CONNECT NEW
DUCT MOUNTED SENSOR TO EXISTING DDC
CONTROL PANEL AND EXISTING JCI BAS.
PROVIDE ALL COMPONENTS REQUIRED TO
INTEGRATE NEW DUCT MOUNTED SENSOR
ONTO THE EXISTING FRONT-END GRAPHICS.
INSTALL SALVAGED THERMOSTAT, CONTROL
WIRING, CONTROLS, AND ALL ASSOCIATED
ACCESSORIES IN THE LOCATION SHOWN PER
THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS. CONNECT SALVAGED
THERMOSTAT TO EXISTING DDC CONTROL
PANEL AND EXISTING JCI BAS. PROVIDE ALL
COMPONENTS REQUIRED TO INTEGRATE NEW
THERMOSTAT ONTO THE EXISTING FRONT-END
GRAPHICS.
INSTALL RELOCATED SALVAGED FIN TUBE LOOP
WATER TEMPERATURE SENSOR, CONTROL
WIRING, CONTROLS, AND ALL ASSOCIATED
ACCESSORIES IN THE LOWER LOWER PIPING
CHASE IN THE LOCATION SHOWN. MODIFY
EXISTING PIPING AS REQUIRED TO INSTALL NEW
SENSOR. CONNECT SALVAGED SENSOR TO THE
EXISTING DDC CONTROL PANEL AND JCI BAS.
PROVIDE ALL REQUIRED EQUIPMENT TO
INTEGRATE SALVAGED SENSOR ON TO THE
EXISTING FRONT-END GRAPHICS.
GENERAL MECHANICAL NOTES
1. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS REQUIRED TO
CONNECT NEW EQUIPMENT TO THE EXISTING DDC CONTROL PANEL AND JCI
METASYS BAS. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS
REQUIRED TO INTEGRATE ALL NEW EQUIPMENT INTO THE EXISTING
FRONT-END GRAPHICS.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-402
BUILDING 200 FIRST FLOOR
PLAN - MECHANICAL NEW
DBP
CAT
N BUILDING 200 FIRST FLOOR PLAN - MECHANICAL NEW
SCALE: 1/8" = 1'-0"
0 1 5 10 20
X-EF-12X-12x8 EA X-12x8
EA DN
X-UH-1
X-UH-4
X-EF-7
M
X-EH-5
(LOCATED
ON ROOF)
X-XT-1
X-P-1
X-P-2
X-P-3
X-P-4
X-EF-11
X-16x8 EA
X-16x8
EA DN
X-UH-3
X-UH-2
X-12x8 EA X-12x8
EA DN
X-EF-10
X-EF-9
M
X-EH-4
(LOCATED
ON ROOF)
X-DAC-1
M
X-708x152 OA
X-56" PLENUM
X-AHU-4
X-RF-3
EA UP
TO X-EH-3
X-20x18
RA DN
X-20x18
SA DN
X-20x18 RA
X-20x18 SA
X-AHU-3
X-30x30
SA DN
X-30x30 SA
M
X-AHU-2
EA UP
TO X-EH-2
X-46x34 RA
X-RF-2
X-50x38 RA
X-32x50
RA
X-32x50 RA
X-46x34
SA DN
X-30x16 SA
X-30x16 SAX-30x16 SA X-30x16 SAX-30x14 SA
X-46x34 SA
X-42x34 SA
X-46x34 SA
X-24x20
SA DN
X-24x20
SA DN
X-42x24 SAX-40x20 SA X-24x20
SA DN
X-24x20
SA DN
X-20x20 SA
X-20x20
SA DN
X-RF-1
X-26x26 RA X-26x26 RA
X-26x26 RA
X-AHU-1
M
EA UP
TO X-EH-1
X-180x152 OA
X-56" PLENUM
X-26x26 RA X-14x22
SA DN,
ZONE 8
X-6x22 SA DN, ZONE 7
X-16x18
SA DN,
ZONE 1
X-8x18 SA DN, ZONE 5
X-8x22 SA DN, ZONE 2
X-8x22 SA DN, ZONE 4
X-6x22 SA DN, ZONE 3
X-8x22 SA DN, ZONE 6
X-680x56 LOUVER
X-LOUVER X-LOUVER
M
M
X-WATER
SOFTENER
X-IT RACK
X-CONDENSER RAIL
X-CONDENSER RAIL
M
M
M
X-P-6
X-P-6
X-LOUVER
M
M
M
MMM
M
M
M
M
M
M
T
X-SF-5 X-UH-4
T
T
X-UH-3
T X-SF-4
T
X-UH-2
T
X-SF-3
T
X-UH-1
CU-200-1
CU-200-1 CU-200-2
X-AHU-1 & X-RF-1
DDC CONTROL
PANEL
X-AHU-2 & X-RF-2
DDC CONTROL
PANEL
X-AHU-3 DDC
CONTROL PANEL
X-AHU-4 & X-RF-3 DDC
CONTROL PANEL
CC-200-1
M
EPO SWITCH
EPO SWITCH
M
M
M
MULTIZONE DAMPER
ACTUATOR(S), 8 ACTUATORS
M
M
MISC. EQUIPMENT
DDC CONTROL
PANEL
CU-200-3
4" CONCRETE
PAD (TYP.)
M
M
M
M
X-CONCRETE
PAD
X-CONCRETE PAD
X-B-200-1
X-6" VTR & 4" CA
(TYP. 4)
X-B-200-2
X-B-200-3 X-B-200-4
X-CONCRETE
PAD
M
M
M
M
M
M
M
T
X-SF-5 X-UH-4
T
T
X-UH-3
T X-SF-4
T
X-UH-2
T
X-SF-3
T
X-UH-1
CU-200-1
CU-200-1 CU-200-2
X-AHU-1 & X-RF-1
DDC CONTROL
PANEL
X-AHU-2 & X-RF-2
DDC CONTROL
PANEL
X-AHU-3 DDC
CONTROL PANEL
X-AHU-4 & X-RF-3 DDC
CONTROL PANEL
CC-200-1
M
EPO SWITCH
EPO SWITCH
M
M
M
M
M
MULTIZONE DAMPER
ACTUATOR(S), 8 ACTUATORS
M
M
MISC. EQUIPMENT
DDC CONTROL
PANEL
CU-200-3
4" CONCRETE
PAD (TYP.)
B-200-3 B-200-4
M
M
D-200-5
D-200-6
D-200-7
1 1
D-200-1 D-200-4
1 1
D-200-2 D-200-3 1 1
SF-200-1 SF-200-2 SF-200-3 SF-200-4
SF-200-5 1
CONCRETE
PAD
B-200-5
DWH-200-1DWH-200-2
6" VTR &
4" CA
3 3
HVAC KEY NOTES
INSTALL NEW SUPPLY FAN, DAMPER, AND ALL
ASSOCIATED ACCESSORIES AT THE LOCATION
SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. CONTRACTOR TO
FIELD VERIFY DIMENSIONS FOR NEW DAMPER
PRIOR TO ORDERING. RE-INSTALL EXISTING
DAMPER ACTUATOR, CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES ON
NEW DAMPER. CONTRACTOR TO PROVIDE ALL
REQUIRED COMPONENTS TO CONNECT EXISITNG
ACTUATOR TO NEW DAMPER.
INSTALL NEW BOILER, COMBUSTION AIR INTAKE,
FLUE, CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES IN THE LOCATION
SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. ROUTE NEW
COMBUSTION AIR INLET AND VENT THROUGH
NEW ROOF CURB AND NEW ROOF BOOT. PATCH
ROOF TO MATCH EXISTING, SEAL WATER TIGHT,
AND MAINTAIN ALL EXISTING ROOF WARRANTIES.
INSTALL 2x2 ANGLE IRON FRAME AROUND NEW
ROOF PENETRATION AT LOCATION SHOWN.
CONNECT NEW BOILER TO THE EXISTING JCI DDC
CONTROL PANEL. INTEGRATE THE EXISTING
FRONT END GRAPHICS TO INCLUDE NEW BOILER.
INSTALL NEW INDIRECT DOMESTIC WATER
HEATER, PIPING, CONTROLS, CONTROL WIRING,
AND ALL ASSOCIATED ACCESSORIES IN THE
LOCATION SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. INSTALL NEW
INDIRECT DOMESTIC WATER HEATER ON
EXISTING CONCRETE PAD. CONNECT INDIRECT
DOMESTIC WATER HEATER TO THE EXISTING JCI
DDC CONTROL PANEL AND INTERNAL BOILER
CONTROLS. INTEGRATE THE EXISTING FRONT
END GRAPHICS TO INCLUDE NEW INDIRECT
DOMESTIC WATER HEATER.
CONTRACTOR TO CONNECT NEW BOILER TO
EXISTING EPO SWITCH. CONTRACTOR TO
PROVIDE CONTROL WIRING AND ASSOCIATED
ACCESSORIES AS REQUIRED FOR CONNECTION.
INSTALL NEW DAMPER AND ALL ASSOCIATED
ACCESSORIES AT THE LOCATION SHOWN PER
THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS. RE-INSTALL EXISTING DAMPER
ACTUATOR, CONTROLS, CONTROL WIRING, AND
ALL ASSOCIATED ACCESSORIES ON THE NEW
DAMPER. CONTRACTOR TO PROVIDE ALL
REQUIRED COMPONENTS TO CONNECT EXISTING
ACTUATOR TO NEW DAMPER.
GENERAL MECHANICAL NOTES
1. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS REQUIRED TO
CONNECT NEW EQUIPMENT TO THE EXISTING DDC CONTROL PANEL AND JCI
METASYS BAS. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS
REQUIRED TO INTEGRATE ALL NEW EQUIPMENT INTO THE EXISTING
FRONT-END GRAPHICS.
2. CONTRACTOR TO INSTALL ALL NEW EQUIPMENT PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS AND MAINTAIN ALL REQUIRED SERVICE
CLEARANCES.
3. CONTRACTOR TO PATCH NEW ROOF PENETRATIONS AS REQUIRED TO MATCH
EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-403
BUILDING 200 SECOND
FLOOR PLAN - MECHANICAL
NEW
DBP
CAT
N BUILDING 200 SECOND FLOOR PLAN - MECHANICAL NEW
X-12x6
SA
X-SD 350
12"ø ---
X-22x18 SA X-24x18 SA
X-14x6
SA
X-RG ---
X-28x18 RA
X-FTR
X-RG 4600
X-VAV-301-29
T
S1
2S
HVAC KEY NOTES
INSTALL NEW FLAT PLATE SENSOR, CONTROL
WIRING, CONTROLS, AND ALL ASSOCIATED
ACCESSORIES IN THE LOCATION SHOWN PER
THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS. CONNECT NEW FLAT PLATE
SENSOR TO EXISTING DDC CONTROL PANEL
AND EXISTING JCI BAS. PROVIDE ALL
COMPONENTS REQUIRED TO INTEGRATE NEW
FLAT PLATE SENSOR ONTO THE EXISTING
FRONT-END GRAPHICS.
INSTALL RELOCATED SALVAGED FIN TUBE LOOP
WATER TEMPERATURE SENSOR, CONTROL
WIRING, CONTROLS, AND ALL ASSOCIATED
ACCESSORIES IN THE LOWER LOWER PIPING
CHASE IN THE LOCATION SHOWN. MODIFY
EXISTING PIPING AS REQUIRED TO INSTALL NEW
SENSOR. CONNECT SALVAGED SENSOR TO THE
EXISTING DDC CONTROL PANEL AND JCI BAS.
PROVIDE ALL REQUIRED EQUIPMENT TO
INTEGRATE SALVAGED SENSOR ON TO THE
EXISTING FRONT-END GRAPHICS.
M-404
BUILDING 300 FIRST FLOOR
PLAN - MECHANICAL NEW
DBP
CAT
N BUILDING 300 FIRST FLOOR PLAN - MECHANICAL NEW
SCALE: 1/4" = 1'-0"
0 1 5 10
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O
F M
IC
H
IG
A
N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
X-48x48 LOUVERX-UH-1X-30x48 LOUVER X-72x48 LOUVER
M
X-IH-6
(LOCATED
ON ROOF)
X-EH-2
(LOCATED
ON ROOF)
M
M
M
X-RF-4
X-24x24 RA
X-33" RA
X-33"
RA
X-24x24 RA
X-26" RA
X-24x24 SA
X-AHU-4
X-24x24 SA
X-30x20 SA
X-26" SA
X-AHU-3
M
M X-96x40
RA
X-42x24 SA UP
TO X-IH-4
X-96x54 SA UP
TO X-IH-3
M
X-44x36
RA
M
X-44x40 EA
X-194x48 LOUVER
X-44x40
RA
X-RF-3
X-42x42 RA DN
X-42" RA
X-44x30
RA DN
M
X-EH-1
(LOCATED
ON ROOF)
X-AHU-5X-AHU-2
M
X-36x20 SA UP
TO X-IH-5
X-22x18
SA DN
X-22x18
RA DN
X-36x20 SA UP
TO X-IH-2
M
M
X-RF-2
X-22x18
SA DN
X-22x18 SA
X-22x18 RA
X-22x18
RA
X-30x48 LOUVER
M
X-22x18
SA DN
X-22x18
SA
X-22x18 EA
X-P-11X-P-10
X-7" VTR
X-DWH-2
X-7" VTR
X-DWH-1
X-UH-2
X-AHU-1
X-30x20 RA
X-26" SA
X-26" RA
X-24X24 RA
X-RF-1
X-30x48 LOUVER
X-33" RA
X-36x30 SA UP
TO X-IH-1
M
M
X-CHEMICAL
POT FEEDER
X-IT RACK X-CONCRETE
PAD
X-CONDENSOR RAIL X-CONDENSOR RAIL
M
X-P-1 X-P-2
M
M
M
M
M
M
M M
X-IH-6
(LOCATED
ON ROOF)
CU-300-1
T
X-SF-2
T
X-UH-2
T
X-SF-1
T
X-UH-1
T
X-SF-2
T
X-UH-2
T
X-SF-1
T
X-UH-1
X-SF-2
X-UH-2 X-SF-1
X-UH-1
6" VTR
(TYP. 4)
4" CA VTR
(TYP. 4)
X-AHU-1 & X-RF-1
CONTROL PANEL
X-AHU-2 & X-RF-2
CONTROL PANEL
X-AHU-5
CONTROL PANEL
X-AHU-3 & X-RF-3
CONTROL PANEL
MISC. EQUIPMENT
CONTROL PANEL
X-AHU-4 & X-RF-4
CONTROL PANEL
CC-300-1
CONCRETE
PAD
EPO SWITCH
EPO SWITCH
M
B-300-1
B-300-2
B-300-3
B-300-4
MMM
D-300-2
D-300-4
D-300-3
D-300-1
SF-300-2 SF-300-1
HVAC KEY NOTES
INSTALL NEW SUPPLY FAN, DAMPER, AND ALL
ASSOCIATED ACCESSORIES AT THE LOCATION
SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. CONTRACTOR TO
FIELD VERIFY DIMENSIONS FOR NEW DAMPER
PRIOR TO ORDERING. RE-INSTALL EXISTING
DAMPER ACTUATOR, CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES ON
NEW DAMPER AND SUPPLY FAN. CONTRACTOR
TO PROVIDE ALL REQUIRED COMPONENTS TO
CONNECT EXISITNG ACTUATOR TO NEW DAMPER.
INSTALL NEW DAMPER AND ALL ASSOCIATED
ACCESSORIES AT THE LOCATION SHOWN PER
THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS. RE-INSTALL EXISTING DAMPER
ACTUATOR, CONTROLS, CONTROL WIRING, AND
ALL ASSOCIATED ACCESSORIES ON THE NEW
DAMPER. CONTRACTOR TO PROVIDE ALL
REQUIRED COMPONENTS TO CONNECT EXISTING
ACTUATOR TO NEW DAMPER.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D E
P A
R T
M E
N T
O F
T E
C H
N O
L O
G Y
M
A N
A G
E M
E N
T A
N D
B U
D G
E T
S T
A T
E O
F M
IC
H
IG
A
N
A D
A M
P
L A
C H
R
A
D
IR
E C
T O
R
S T
A T
E F
A C
IL
IT
IE
S
A D
M
IN
IS
T
R A
T
IO
N
D E
S
IG
N A
N D
C O
N S
T R
U C
T
IO
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-405
BUILDING 300 SECOND
FLOOR PLAN - MECHANICAL
NEW
DBP
CAT
N BUILDING 300 SECOND FLOOR PLAN - MECHANICAL NEW
UP
UP
X-LOUVER
X-UH-1 X-EH-1
T T
M
X-IT RACK
M
X-40x16
F/S
M-406
D-400-4
D-400-3 1
SF-400-1
S
S
X-24x24 LOUVER
X-UH-2
X-P-1X-P-2
X-52x32 LOUVER X-78x48 LOUVER
X-AHU-1
M
X-66x14 EA
UP TO X-EH-3
M
X-EH-2
X-RF-1
X-28x14 RA
M
X-24x24 SA, ZONE 2
X-11x10 SA, ZONE 1
X-12x8 SA, ZONE 3
X-12x6 SA, ZONE 4 X-18x12 SA, ZONE 5
X-20x12 SA, ZONE 8
X-12x10 SA, ZONE 7
X-16x8 SA, ZONE 6
X-CONCRETE PAD
M
M
X-P-4 X-P-9
M
T
T
X-UH-2
T
X-UH-2
X-SF-2 & X-EH-2
B-400-1
B-400-2
4'' CA VTR
(TYP.)
6'' VTR
(TYP.)
MISC. EQUIPMENT DDC
CONTROL PANEL
AHU-1 DDC CONTROL
PANEL
EPO SWITCH MULTIZONE DAMPER
ACTUATOR (8), 8
ACTUATORS
RELIEF & RA DAMPER
ACTUATOR (BELOW)
X-CONCRETE
PAD
T
T
X-UH-2
T
X-UH-2
X-SF-2 & X-EH-2
B-400-1
B-400-2
4'' CA VTR
(TYP.)
6'' VTR
(TYP.)
MISC. EQUIPMENT DDC
CONTROL PANEL
AHU-1 DDC CONTROL
PANEL
EPO SWITCH MULTIZONE DAMPER
ACTUATOR (8), 8
ACTUATORS
RELIEF & RA DAMPER
ACTUATOR (BELOW)
D-400-1
D-400-2
SF-400-2
DWH-400-1
4" CA & 6" VTR
B-400-3
HVAC KEY NOTES
INSTALL NEW SUPPLY FAN, DAMPER, AND ALL
ASSOCIATED ACCESSORIES AT THE LOCATION
SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. CONTRACTOR TO
FIELD VERIFY DIMENSIONS FOR NEW DAMPER
PRIOR TO ORDERING. RE-INSTALL EXISTING
DAMPER ACTUATOR, CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES ON
NEW DAMPER AND SUPPLY FAN. CONTRACTOR
TO PROVIDE ALL REQUIRED COMPONENTS TO
CONNECT EXISITNG ACTUATOR TO NEW DAMPER.
INSTALL NEW 24-VOLT FIRE/SMOKE DDC DAMPER
ACTUATOR, CONTROLS, CONTROL WIRING, AND
ALL ASSOCIATED ACCESSORIES PER THE
MANUFACTURER'S INSTALLATION INSTRUCTIONS
IN THE LOCATIONS SHOWN. NEW DDC
ACTUATORS TO BE INSTALLED ON EXISTING
COMBINATION FIRE/SMOKE DAMPER. PROVIDE
ALL REQUIRED COMPONENTS TO CONNECT NEW
ACTUATOR ONTO EXISTING DAMPER. CONNECT
NEW DDC ACTUATOR TO EXISTING FIRE ALARM
SYSTEM.
INSTALL RELOCATED SALVAGED FIN TUBE LOOP
WATER TEMPERATURE SENSOR, CONTROL
WIRING, CONTROLS, AND ALL ASSOCIATED
ACCESSORIES IN THE LOWER LOWER PIPING
CHASE IN THE LOCATION SHOWN. MODIFY
EXISTING PIPING AS REQUIRED TO INSTALL NEW
SENSOR. CONNECT SALVAGED SENSOR TO THE
EXISTING DDC CONTROL PANEL AND JCI BAS.
PROVIDE ALL REQUIRED EQUIPMENT TO
INTEGRATE SALVAGED SENSOR ON TO THE
EXISTING FRONT-END GRAPHICS.
INSTALL NEW BOILER, COMBUSTION AIR INTAKE,
FLUE, CONTROLS, CONTROL WIRING, AND ALL
ASSOCIATED ACCESSORIES IN THE LOCATION
SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. ROUTE NEW
COMBUSTION AIR INLET AND VENT THROUGH
NEW ROOF CURB AND NEW ROOF BOOT. PATCH
ROOF TO MATCH EXISTING, SEAL WATER TIGHT,
AND MAINTAIN ALL EXISTING ROOF WARRANTIES.
INSTALL 2x2 ANGLE IRON FRAME AROUND NEW
ROOF PENETRATION AT LOCATION SHOWN.
CONNECT NEW BOILER TO THE EXISTING JCI DDC
CONTROL PANEL. INTEGRATE THE EXISTING
FRONT END GRAPHICS TO INCLUDE NEW BOILER.
INSTALL NEW INDIRECT DOMESTIC WATER
HEATER, PIPING, CONTROLS, CONTROL WIRING,
AND ALL ASSOCIATED ACCESSORIES IN THE
LOCATION SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. INSTALL NEW
INDIRECT DOMESTIC WATER HEATER ON
EXISTING CONCRETE PAD. CONNECT INDIRECT
DOMESTIC WATER HEATER TO THE EXISTING JCI
DDC CONTROL PANEL AND INTERNAL BOILER
CONTROLS. INTEGRATE THE EXISTING FRONT
END GRAPHICS TO INCLUDE NEW INDIRECT
DOMESTIC WATER HEATER.
CONTRACTOR TO CONNECT NEW BOILER TO
EXISTING EPO SWITCH. CONTRACTOR TO
PROVIDE CONTROL WIRING AND ASSOCIATED
ACCESSORIES AS REQUIRED FOR CONNECTION.
INSTALL NEW DAMPER AND ALL ASSOCIATED
ACCESSORIES AT THE LOCATION SHOWN PER
THE MANUFACTURER'S INSTALLATION
INSTRUCTIONS. RE-INSTALL EXISTING DAMPER
ACTUATOR, CONTROLS, CONTROL WIRING, AND
ALL ASSOCIATED ACCESSORIES ON THE NEW
DAMPER. CONTRACTOR TO PROVIDE ALL
REQUIRED COMPONENTS TO CONNECT EXISTING
ACTUATOR TO NEW DAMPER.
GENERAL MECHANICAL NOTES
1. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS REQUIRED TO
CONNECT NEW EQUIPMENT TO THE EXISTING DDC CONTROL PANEL AND JCI
METASYS BAS. CONTRACTOR TO PROVIDE ALL CONTROL COMPONENTS
REQUIRED TO INTEGRATE ALL NEW EQUIPMENT INTO THE EXISTING
FRONT-END GRAPHICS.
2. CONTRACTOR TO INSTALL ALL NEW EQUIPMENT PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS AND MAINTAIN ALL REQUIRED SERVICE
CLEARANCES.
3. CONTRACTOR TO PATCH NEW ROOF PENETRATIONS AS REQUIRED TO MATCH
EXISTING, SEAL WATERTIGHT, AND MAINTAIN ANY EXISTING ROOF
WARRANTIES.
24314.00
472/24257.CTS
file no.
checked by drawn by consultant issue date contract order no.
consultant job no.
M a t r ix funding code sheet description
D
EP
A R
TM
EN
T O
F
TE
C H
N O
LO
G
Y , M
A N
A G
EM
EN
T A
N D
B U
D G
ET
ST
A
TE
O F
M
IC
H
IG
A N
A D
A M
P . L
A C
H , R
A , D
IR
EC
TO
R
ST
A
TE
F
A C
IL
IT
IE
S
A D
M
IN
IS
TR
A
TI
O N
D
ES
IG
N
A N
D C
O N
ST
R
U C
TI
O
N D
IV
IS
IO
N
7/28/2025 CD SET
KEY PLAN
SCALE: NTS
N M-406
BUILDING 400 UPPER LEVEL
FLOOR PLAN - MECHANICAL
NEW
DBP
CAT
N BUILDING 400 UPPER LEVEL FLOOR PLAN - MECHANICAL NEW
SCALE: 1/8" = 1'-0"
0 1 5 10 20
1 BUILDING 400 MECHANICAL ROOM - MECHANICAL NEW
UP
UPUP
UP
M
X-LOUVER
X-UH-1
X-EH-1
M
X-IT RACK
T T
X-TG 550
--- TYP. 2
X-TG 440
--- TYP. 2
X-TG 350
--- TYP. 2
X-22x10 SA X-22x8 SA X-18x10 SAX-22x10 SA
F/S F/S F/S F/S
M-407
D-500-3
D-500-4
2 2 2 2
SF-500-1
S S
X-UH-2
X-78x48
LOUVER
M
X-24x24
LOUVER
X-AHU-1
M X-42x18 SA
UPX-EH-2
X-P-1 X-P-2
M
X-18x10 SA, ZONE 1
X-10x8 SA, ZONE 2
X-10x10 SA, ZONE 4
X-CONCRETE
PAD
M
X-10x8 SA, ZONE 3
X-P-4
TX-UH-1
T
X-SF-2 & X-EH-2
B-500-2 B-500-1
MISC. EQUIPMENT DDC
CONTROL PANEL
X-AHU-1 DDC CONTROL
PANEL
4'' CA VTR
(TYP.)
6'' VTR (TYP.)
EPO SWITCH
MULTIZONE DAMPER
ACTUATOR(S), 4 ACTUATORS
X-CONCRETE PAD
TX-UH-1
T
X-SF-2 & X-EH-2
B-500-2 B-500-1
MISC. EQUIPMENT DDC
CONTROL PANEL
X-AHU-1 DDC CONTROL
PANEL
4'' CA VTR
(TYP.)
6'' VTR (TYP.)
EPO SWITCH
MULTIZONE DAMPER
ACTUATOR(S), 4 ACTUATORS
1 D-500-1
D-500-2
SF-500-2
B-500-3
DWH-500-1
6" VTR
4" CA VTR
HVAC KEY NOTES
INSTALL NEW SUPPLY FAN, DAMPER, AND ALL
ASSOCIATED ACCESSORIES AT THE LOCATION
SHOWN PER THE MANUFACTURER'S
INSTALLATION INSTRUCTIONS. CONTRACTOR TO
FIELD VERIFY DIMENSIONS FOR NEW DAMPER
PRIOR TO ORDERING. RE-INSTALL EXISTING
DAMPER ACTUATOR, CONTROLS, CONTROL
WIRING, AND ALL ASSOCIATED ACCESSORIES ON
NEW DAMPER. CONTRACTOR TO PROVIDE ALL
REQUIRED COMPONENTS TO CONNECT EXISITNG
ACTUATOR TO NEW DAMPER.
INSTALL NEW 24-VOLT FIRE/SMOKE DDC DAMPER
ACTUATOR, CONTROLS, CONTROL WIRING, AND
ALL ASSOCIATED ACCESSORIES PER THE
MANUFACTURER'S INSTALLATION INSTRUCTIONS
IN THE LOCATIONS SHOWN. NEW DDC
ACTUATORS TO BE INSTALLED ON EXISTING
COMBINATION FIRE/SMOKE DAMPER. PROVIDE
ALL REQUIRED COMPONENTS TO CONNECT NEW
ACTUATOR ONTO EXISTING DAMPER. CONNECT
NEW…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .