DUALDISPENSINGTANKrequirement.docx

REQUIREMENT #3 SPECIFICATIONS FOR USCG KETCHIKAN

*BRAND NEW PRODUCTS SHALL BE ONLY ACCEPTABLE PRODUCT

DUAL Dispensing tank

1,000 gallon Diesel 500 gallon gasoline

· Application: Aboveground

· Product stored: Diesel

· Type: DOUBLE WALL

· Material: Mild Carbon Steel

· Diameter: 5'10" Length: 9'7"

· 7 GA Shell 7 GA Head 7 GA Outer Shell 7 GA Outer Head

· Exterior Coating: FIREGUARD WHITE

· (2) 70" D x 6" H Saddles

· STI Specification

· Seal Welded to Tank 1- Double Bulkhead for 64" Dia FIREGUARD® 1- Pop-up Leak Gauge For 64" Cylindrical FIREGUARD® Tank (70" Long)

· Leak Gauge for Bulkhead 1-Emergency Vent - Flanged 6" - 8 Oz/Sq In (Aluminum)

· Includes: Gasket, Nuts, Bolts & Washers 1-Exterior Paint Touch Up Kit 1-VENT PACKAGE - DIESEL (For Fireguard®) 1-Mushroom Vent - 2" Normal/Galvanized 1-Vent Pipe - Galvanized 2" x 7' (TBE)

GAUGE PACKAGE

1-Pop-up Leak Gauge For 64" Cylindrical FIREGUARD® Tank (70" Long 1-Direct Reading Level Gauge For 64" Cyl FIREGUARD® Tank (70" Lon

FILL ACCESSORIES PACKAGE - DIESEL

(Fill Package # 2 Diesel) 1-Assembled Fill Port - Vertical - 2" Min. 10 Gal SS enclosure with drain and plug

- Quick connect female adapter w/dust cap

- Internal butterfly valve

- Check valve

- Internal hand pump

- Hinged locking door

- Flanged top connection

- HT standard design mounting 1-Overfill Prevention Valve 2" AST (2" FM Thrd x 4" FM Thrd) 1-Drop Tube - Aluminum 2"

· Cut to length 1-Nipple - Close 4"

Fill Package Piping and Assembly (2") Includes: 2" 150# RFSO Flanges for piping Includes: Flange gasket, standard nuts & bolts.

HL-37 (D) PUMP PACKAGE

1-Pump - 120V AC (Up to 20 GPM) 1" Outlet 1-Drop Pipe 1-1/4" (TOE) 1-4-Digit Meter, 1" Inlet (mechanical) 1-Inline Digital Pulser for Diesel (Up To 30 GPM) ** Required for use w/FuelShield ** 1-Filter Head - 1" 1" Aluminum Filter Head. Nose Thread (The Threads Where The Filter Spins Onto the Filter Head) Is 1-1/2" 16 UNF Use with Filters F4010PMO and F4030PMO 2-Fuel Filter - HL-27,37,47,57,67

- 10 Micron Filter PSI 40 GPM 1 1/2-16 compatible with gasoline, diesel ethanol blends up to 15% and ultra-low sulfur diesel

- Spare filter included 1-Hose Swivel - 1" 1-Whip Hose - 1" 1-Breakaway - 1" 1-Nozzle - Automatic - 1" Ultra Thin High Flow, Green Cover (Dies

HOSE PACKAGE - DIESEL 1" x 15' 1-Hose Reel for up to 15' of 1" Hose 1-FireShield Flexible Stainless Steel Hose - 1"

· 1" ID SS braided flexible hose to connect hard pipe to hose reel inlet, Male x Male NPT Threads Length of hose to be determined based on design requirements

1-Swivel Adapter for Flexible Hose - 1" 1-Fuel Hose - 1" x 15'

· With Static Wire and Internal Spring Guards - NPT Threads 1-Ball Stop - 1" 1-Hose Reel Mount

TURNKEY ASSEMBLY PACKAGE (FOR TIER 1 SYSTEM)

Use with HL-27, HL-37 Or HL-57 Assembled 5 PSI Air Test At Factory prior to shipping. A second air pressure test by contractor or installer is required upon delivery of the tank to the jobsite to ensure all connections remain sealed and tight. Installer to tighten all leaks. Conduit seal-offs will not be poured in the factory prior to shipping. Installer / On-Site electrician shall pour all seal-offs during final site inspection by the permitting authority. Any items indicated to ship loose or broken down prior to shipping are to be installed / reassembled by the on- site installer

1-Assembly (For HL-27,37,57 System)

· Includes: Installing vent package as allowed for shipping, fill package, gauge package, pump package, FuelShield package and Optional electronic leak & overfill 1-Electrical Hardware (For HL-27,37,57 System)

· Electrical Seal-offs at all junctures and all rigid 3/4"conduit 1-Explosion-Proof (NEMA 7) Justion Box for Non-Submersible Pump Sys.

· NEMA 7/4X rated junction box w/terminal strip for on-site connections. Includes: pre-drilled holes for 1" conduit (2 on each side) 1 Piping From Pump to Hose Reel 1" Piping From Pump Outlet To Hose Reel Inlet 1 1" 150# Slip On Flange (ASA Std R.F.) (aboveground) 1 Ball Valve 1"

STANDARD STICKER PACKAGE - DIESEL

Package Includes:

· 4 "Danger Diesel Fuel" - (10" X 14") Vinyl Adhesive Warning Sign

· 4 No Smoking - Stop your Engine (7" H x 10" W)

· 4 "Combustible" - (6" x 14" Red Lettering)

· 4 1993 Combustible Liquid N.O.S. (10-3/4" H x 10-3/4" W) VENT PACKAGE – GASOLINE (For Fireguard®)

· 1 Pressure Vacuum Vent - 2" AL (8 OZ/IN2 PRESS, 1 OZ/IN2 VAC)

20,200 CFH @ 2.5 PSI

· 1 Vent Pipe - Galvanized 2" x 7' (TBE)

· 2 Emergency Vent - Flanged 6" - 16 Oz/Sq In Includes: Gasket, Nuts, Bolts & Washers

GAUGE PACKAGE

· 1 Pop-up Leak Gauge For 64" Cylindrical FIREGUARD® Tank (70" Long

· 1 Direct Reading Level Gauge For 64" Cyl FIREGUARD® Tank (70" Long

FILL ACCESSORIES PACKAGE - GASOLINE

· 1 Assembled Fill Port - Vertical - Vapor Recovery - 2" Includes:

- Min. 10 Gal SS enclosure with drain and plug

- Quick connect female adapter w/dust cap

- Internal butterfly valve

- Check valve

- Internal hand pump

- Hinged locking door

- Flanged top connection

- HT standard design mounting brackets

1 Overfill Prevention Valve 2" AST (2" FM Thrd x 4" FM Thrd)

1 Drop Tube – Aluminum 2”

· Cut to length 1 Nipple - Close 4"