Drawings.pdf
PDF 18 MB Posted
- Attached to
- Lambros Fire Alarm Replacement Federal contract opportunity
- Solicitation number
- 47PF0024R0025
About this file
This solicitation notice seeks construction services for a fire alarm replacement project at the Thomas D. Lambros Federal Building and U.S. Courthhouse in Youngstown, Ohio. A complete replacement of the existing 25+ year old fire alarm system and components is required, including the supply and installation of a new firefighters' radio communications system. Additionally, a new fire command center will be built along with a new CSO office and BAS and storage room. The contractor must provide a fire watch while the fire alarm and fire protection systems are offline. The General Services Administration Public Buildings Service Region 5 is the issuing agency. This opportunity is set aside for women-owned small businesses. A pre-proposal meeting and site visit will be held on February 15, 2022 at 10AM EST. Interested parties should find registration information and bid submission details in the attached drawings and project specifications documents.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 2.pdf | ||
| Amendment 1.pdf | ||
| RFP 47PF0024R0025.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PUBLIC BUILDINGS SERVICE
GREAT LAKES REGION
U.S. GENERAL SERVICES ADMINISTRATION
LAMBROS FIRE ALARM SYSTEM REPLACEMENT
100% CONSTRUCTION DOCUMENTS
MARCH 16, 2022
INDEX OF DRAWINGS
SHEET No. SHEET TITLE SEQUENCE NO.
TS-0-01 TITLE SHEET 1
ARCHITECTURAL
A-1-01 1ST FLOOR ARCHITECTURAL PLANS 2
A-2-01 2ND FLOOR ARCHITECTURAL PLANS 3
A-3-01 3RD FLOOR ARCHITECTURAL PLANS 4
FIRE PROTECTION
FS-101 1ST FLOOR FIRE PROTECTION PLAN 5
FS-102 2ND FLOOR FIRE PROTECTION PLAN 6
FS-103 3RD FLOOR FIRE PROTECTION PLAN 7
HVAC
M-101 1ST FLOOR HVAC PLAN 8
ELECTRICAL
ED101 ELECTRICAL & TECHNOLOGY DEMOLITION PLAN 9
E001 ELECTRICAL & TECHNOLOGY LEGENDS 10
E101 ELECTRICAL & TECHNOLOGY PLAN, 1ST FLOOR 11
E102 ELECTRICAL & TECHNOLOGY PLAN, 2ND FLOOR 12
E103 ELECTRICAL & TECHNOLOGY PLAN, 3RD FLOOR 13
E501 ELECTRICAL & TECHNOLOGY DETAILS 14
E601 ELECTRICAL PANELS AND SCHEDULES 15
E602 ELECTRICAL SINGLE LINE DIAGRAM 16
EL101 LIGHTING PLAN, 1ST FLOOR 17
FIRE ALARM
FD-101 FIRE ALARM DEMO PLAN 18
FD-102 FIRE ALARM DEMO PLAN 19
FD-103 FIRE ALARM DEMO PLAN 20
FA-001 FIRE ALARM NOTES AND LEGENDS 21
FA-002 FIRE ALARM RISER DIAGRAM 22
FA-101 1ST FLOOR FIRE ALARM PLAN 23
FA-102 2ND FLOOR FIRE ALARM PLAN 24
FA-103 3RD FLOOR FIRE ALARM PLAN 25
FA-600 INSTALLATION DETAILS 26
ERCES
RF-001 ERCES NOTES, LEGEND, AND RISER 27
RF-101 ERCES FIRST FLOOR PLAN 28
RF-102 ERCES SECOND FLOOR PLAN 29
RF-103 ERCES THIRD FLOOR PLAN 30
RF-104 ERCES ROOF PLAN 31
1. THESE DRAWINGS WERE PREPARED BASED ON EXISTING DOCUMENTS PREPARED
BY OTHERS, AND REFERENCED HEREIN.
2. SELECTED CONTRACTORS SHALL FIELD VERIFY ALL DIMENSIONS AND CONDITIONS
THAT MAY AFFECT THE WORK PRIOR TO THE START OF CONSTRUCTION, AND
SUBMIT ANY DISCREPANCIES IN WRITING TO THE OWNER'S REPRESENTATIVE FOR
RESOLUTION.
3. ALL WORK SHALL CONFORM TO THE REQUIREMENTS OF FEDERAL CODES AND
REQUIREMENTS.
4. PRIOR TO CONSTRUCTION COMMENCING, CONSTRUCTION SCHEDULING AND
SEQUENCING SHALL BE COORDINATED THROUGH THE GSA.
GENERAL CONSTRUCTION NOTES
6611 Rockside Road Suite 100 Independence, OH 44131
(440) 247-3770 www.jensenhughes.com
FIRE ALARM AND PROTECTION DESIGNERS
3510 Snouffer Road Suite 200 Columbus, OH 43235
(614) 923-3930 info@metrocdengineering.com
PROJECT LEAD A/E
4608 Indianola Ave.
Columbus, OH 43214
(614) 784-8733 info@hardlinesdesign.com
ARCHITECTURAL
6611 Rockside Road | Suite 100 | Independence, OH 44131 O: 440-247-3770 www.jensenhughes.com
Metro CD Engineering, LLC 3510 Snouffer Rd, Suite 200 Columbus , OH 43235
614-923-3930 info@metrocdengineering.com
ISSUED FOR
100% CONSTRUCTION
DOCUMENTS
03/16/2022
MICHAEL
CHOW
E-64993
STATE OF OH IO
REG I S T ERED
P R
O
FESS I ONAL ENG I N
EE
R
AutoCAD SHX Text
TITLE SHEET
AutoCAD SHX Text
TS-0-01.DWG
AutoCAD SHX Text
GENERAL
AutoCAD SHX Text
BWM, BJH
AutoCAD SHX Text
MHC
AutoCAD SHX Text
TS-001
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LAURA BROWN
AutoCAD SHX Text
THOMAS D. LAMBROS U.S. COURTHOUSE
AutoCAD SHX Text
125 MARKET STREET
AutoCAD SHX Text
YOUNGSTOWN, OHIO 44503
AutoCAD SHX Text 44114-1223
AutoCAD SHX Text
OH0215ZZ
AutoCAD SHX Text
METRO CD
AutoCAD SHX Text
JENSEN HUGHES, HARDLINES DESIGN
AutoCAD SHX Text
GSA PUBLIC BUILDINGS SERVICE
AutoCAD SHX Text
GREAT LAKES REGION
AutoCAD SHX Text
230 S. DEARBORN, SUITE 3512
AutoCAD SHX Text
CHICAGO, ILLINOIS 60604-1696
AutoCAD SHX Text
CERTIFICATIONS
AutoCAD SHX Text
KEY PLAN
AutoCAD SHX Text
REVISION NOTES
AutoCAD SHX Text
GENERAL SERVICES ADMINISTRATION
AutoCAD SHX Text PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY. Do not remove this notice. Properly destroy documents when no longer needed.
AutoCAD SHX Text
SHEET SIZE:
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text
DISCIPLINE
AutoCAD SHX Text
SHEET TYPE
AutoCAD SHX Text
SEQUENCE
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
DRAWING TITLE
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
CHECKED BY
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
GSA PM
AutoCAD SHX Text
SUB. DATE
AutoCAD SHX Text
SUBMISSION
AutoCAD SHX Text
TITLE
AutoCAD SHX Text BUILDING NOs.
AutoCAD SHX Text
OTHER
AutoCAD SHX Text
BUILDING NO.
AutoCAD SHX Text
CITY/ST./ZIP
AutoCAD SHX Text
STREET
AutoCAD SHX Text
NAME
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
SUB A/E
AutoCAD SHX Text
PRIME A/E
AutoCAD SHX Text
CONS. CONTR.
AutoCAD SHX Text
A/E CON. NO.
AutoCAD SHX Text
CONTRACTORS
AutoCAD SHX Text
GRAPHIC SCALE
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
FLOOR NO.
AutoCAD SHX Text
CONSTR. CON.
AutoCAD SHX Text
FACILITY CODE
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
A/E TASK NO.
AutoCAD SHX Text
CONS. WORK
AutoCAD SHX Text 30 X 42
AutoCAD SHX Text
GS-05P-17-SC-D-0004
AutoCAD SHX Text
100%%% CONSTRUCTION DRAWINGS
AutoCAD SHX Text 03/16/2022
AutoCAD SHX Text
MCD306
AutoCAD SHX Text 20054-001
AutoCAD SHX Text
THOMAS D. LAMBROS U.S. COURTHOUSE FIRE ALARM SYSTEM REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PCN NUMBER
AutoCAD SHX Text
XXXXXX
UP
TELEPHONE
EQUIPMENT
ELECTRIC
EQUIPMENT
ELEVATOR
LOBBY
PUBLIC
7'-7" 6"
RCP & FLOOR PLAN CODED NOTES:
1. REMOVE EXISTING CMU WALLS, FLOOR TILE, MASTICS, BASE, CEILING
ASSEMBLY, LOCKERS AND FURNISHINGS AS REQUIRED FOR NEW
WORK. PATCH AND PAINT EXISTING WALLS AS REQUIRED FOR NEW
WORK - REFERENCE WALL LEGEND.
2. REMOVE EXISTING DOOR, FRAME AND DOOR HARDWARE. PATCH AND
PAINT EXISTING WALL AS REQUIRED FOR NEW WORK, PAINT.
3. PROVIDE AND INSTALL NEW PARTITION WALL ASSEMBLY FROM
EXISTING FLOOR DECK TO EXISTING CEILING DECK ABOVE
(REFERENCE FLOOR PLAN FOR WALL WIDTH). PROVIDE AND INSTALL
NEW BASE AND PAINT WALL BOTH SIDES - REFERENCE WALL LEGEND
AND ROOM FINISH SCHEDULE.
4. INFILL EXISTING MASONRY OPENING WITH NEW 3 58" METAL STUDS
AND 58" F.C. GYPSUM BOARD EACH SIDE TO MATCH EXISTING WALL
PROFILES. PROVIDE AND INSTALL NEW MARBLE BASE TO MATCH
EXISTING AND PAINT WALL TO MATCH EXISTING, FULL LENGTH AND
HEIGHT OF WALL.
5. PROVIDE AND INSTALL NEW 2 12" METAL STUD FURRING AT 16" O.C.
WITH 58" F.C. GYPSUM BOARD TO 6" ABOVE CEILING. PROVIDE AND
INSTALL NEW BASE AND PAINT AT WALL - REFERENCE WALL LEGEND.
6. ALIGN NEW WALL ASSEMBLY AT CENTERLINE OF EXISTING ADJACENT
WALL ASSEMBLY.
7. PROVIDE AND INSTALL NEW DOOR, FRAME AND DOOR HARDWARE -
REFERENCE DOOR SCHEDULE AND DOOR SPECIFICATIONS.
8. PROVIDE AND INSTALL ALL NEW FLOOR, WALL AND CEILING FINISHES
IN THIS ROOM - REFERENCE ROOM FINISH SCHEDULE ON THIS
DRAWING SHEET.
9. REMOVE EXISTING RUBBER BASE AS REQUIRED FOR NEW WORK - FULL
LENGTH AND HEIGHT OF EXISTING WALL. PATCH, REPAIR, AND PREP
ALL SURFACES AS REQUIRED FOR NEW PAINT - REFERENCE MEP/FP
DRAWINGS FOR SCOPE OF WORK. PROVIDE AND INSTALL NEW PAINT
FULL LENGTH AND HEIGHT OF EXISTING WALL.
10. REMOVE EXISTING CMU WALL AREA AS REQUIRED FOR NEW DOOR
AND FRAME. SALVAGE EXISTING MARBLE BASE FOR REPLACEMENT AT
OTHER AREAS. PATCH, REPAIR AND PREP ALL FLOOR, WALL AND
CEILING SURFACES TO MATCH. PROVIDE AND INSTALL NEW PAINT TO
MATCH EXISTING, FULL LENGTH OF WALL.
11. REMOVE EXISTING WALLPAPER AND ABANDONED EXISTING WALL
ATTACHMENTS AS REQUIRED FOR NEW WORK, EXISTING MARBLE BASE
TO REMAIN - FULL LENGTH AND HEIGHT OF EXISTING WALL. PATCH,
REPAIR, AND PREP ALL SURFACES AS REQUIRED FOR NEW PAINT -
REFERENCE MEP/FP DRAWINGS FOR SCOPE OF WORK. PROVIDE AND
INSTALL NEW PAINT FULL LENGTH AND HEIGHT OF EXISTING WALL.
12. REMOVE ABANDONED EXISTING WALL ATTACHMENTS FROM EXISTING
CMU WALL AS REQUIRED FOR NEW WORK, EXISTING BASE TO REMAIN.
PATCH, REPAIR, AND PREP ALL CMU WALL SURFACES AS REQUIRED
FOR NEW PAINT - REFERENCE MEP/FP DRAWINGS FOR SCOPE OF
WORK. PROVIDE AND INSTALL NEW RUBBER BASE AND PAINT FULL
LENGTH AND HEIGHT OF EXISTING WALL.
13. REMOVE EXISTING STORAGE SHELVING AS REQUIRED FOR NEW WORK.
PATCH AND PAINT FULL LENGTH AND HEIGHT OF EXISTING WALL TO
MATCH EXISTING ADJACENT WALL.
14. PROVIDE AND INSTALL NEW ACT CEILING GRID AND TILE ASSEMBLY -
REFERENCE ROOM FINISH SCHEDULE AND SPECIFICATIONS.
15. PATCH, REPAIR, AND PREP ALL GYPSUM CEILING SURFACES AS
REQUIRED FOR NEW PAINT - REFERENCE MEP/FP DRAWINGS FOR
SCOPE OF WORK. PROVIDE AND INSTALL NEW PAINT OVER THE
ENTIRE CEILING IN THIS ROOM.
16. REMOVE ALL EXISTING WALLPAPER AND ABANDONED EXISTING WALL
ATTACHMENTS AS REQUIRED FOR NEW WORK IN THIS ROOM. PATCH,
PREP, AND REPAIR ALL SURFACES AS REQUIRED FOR NEW PAINT.
WALL LEGEND:
DEMOLISH AND REMOVE EXISTING WALL PARTITIONS,
DOORS, FRAMES AND ACCESSORIES AS REQUIRED FOR
NEW WORK. ALL NEW HORIZONTAL AND VERTICAL
CUTS SHALL BE IN A NEAT, STRAIGHT LINE.
EXISTING WALL PARTITIONS TO REMAIN. REFERENCE
ROOM FINISH SCHEDULE.
NEW WALL FURRING - PROVIDE AND INSTALL 2 12"
METAL FURRING STUDS AT 16" O.C. WITH (1) LAYER
8" GYPSUM BOARD TO 6" ABOVE NEW OR EXISTING
CEILING ASSEMBLY, PAINT. REFERENCE ROOM FINISH
SCHEDULE.
NEW 3 58" OR 6" METAL STUD PARTITION WALL (AS
NOTED ON THE DRAWING) - PROVIDE AND INSTALL
METAL STUDS AT 16" O.C. WITH (1) LAYER 58" F.C.
GYPSUM BOARD EACH SIDE TO INFILL EXISTING
OPENINGS OR FROM EXISTING FLOOR DECK TO
EXISTING CEILING DECK ABOVE, PAINT BOTH SIDES.
REFERENCE ROOM FINISH SCHEDULE.
NEW 7 58" CMU INFILL WALL - MATCH EXISTING CMU
PROFILES AND PAINT FULL LENGTH AND HEIGHT OF
WALL. PROVIDE NEW HORIZONTAL AND VERTICAL
CUTS IN A NEAT, STRAIGHT LINE - DO NOT TOOTH
INTO EXISTING CMU.
(NOTE: NOT ALL NOTES MAY APPLY TO THIS SHEET)
1ST FLOOR KEY PLAN
6611 Rockside Road | Suite 100 | Independence, OH 44131 O: 440-247-3770 www.jensenhughes.com
Metro CD Engineering, LLC 3510 Snouffer Rd, Suite 200 Columbus , OH 43235
614-923-3930 info@metrocdengineering.com
ISSUED FOR
100% CONSTRUCTION
DOCUMENTS
3/16/2022
SCOPE OF
WORK AREA
B
A.7
6 6.1 6.3 7
DOOR SCHEDULE
DOORS
SIZE
WIDTH HEIGHT
MATL. TYPE
FRAMES
MATL. TYPE
DETAIL
HEAD JAMB THRES.
FIRE RATING
LABEL (MINS.)
REMARKSDOOR
NUMBER
ROOM
NUMBER ROOM NAME FLOOR BASE
WALL
NORTH SOUTH EAST WEST
CSO OFFICE
134 MECHANICAL MAINTENANCE PT-1
REMARKS
VCT RB
ROOM FINISH SCHEDULE
CPT
CEILING
CEILING
HEIGHT
(+/-) 14'-0"
ACTRB137 9'-0"
1 - FLUSH 1
DOOR ELEVATION FRAME ELEVATION DOOR SCHEDULE REMARKS
1. STAIN DOOR COLOR (BASIS OF DESIGN): TBD
2. PAINT DOOR FRAME COLOR (BASIS OF DESIGN): BENJAMIN MOORE - PT-2
3. INSTALL ROOM SIGNAGE FURNISHED BY TITLE AGENCY.
ROOM FINISH SCHEDULE REMARKSROOM FINISH LEGEND GENERAL ROOM FINISH NOTES
PT-1 PT-1 PT-1 PT-1
137 3'-0" 7'-0" SC WD 1 METAL 1 N/A N/A N/A 20 1., 2., 3.
STC
RATING
N/A
DOOR
HDWR.
SET 1
A
54.94.74
6.3 7
B
A.7
6.1
SCOPE OFWORK AREA
SCOPE OF
SCOPE OF
ACT: ACOUSTIC CEILING TILE
CPT: CARPET (BASIS OF DESIGN): COLOR/PATTERN TBD
PT: PAINT (BASIS OF DESIGN): SHERWIN-WILLIAMS, REFERENCE
ROOM FINISH SCHEDULE THIS SHEET FOR COLOR(S)
RB: RUBBER BASE (BASIS OF DESIGN): COLOR - BLACK
VCT: VINYL COMPOSITION FLOOR TILE (BASIS OF DESIGN): COLOR
TBD
PAINT COLORS (BASIS OF DESIGN):
PT-1: WALLS: SHERWIN WILLIAMS - COLOR TBD
PT-2: DOOR FRAMES: SHERWIN WILLIAMS - COLOR TBD
PT-3: CEILING: SHERWIN WILLIAMS - COLOR TBD
A. PATCH CRACKS, REMOVE MASTICS, AND CLEAN
EXISTING CONCRETE FLOOR SLAB BEFORE APPLYING
FLOOR FINISHES.
B. PATCH EXISTING WALLS TO MATCH EXISTING ADJACENT
WALLS WHERE REQUIRED FOR NEW WORK.
C. REFER TO REFLECTED CEILING PLAN FOR CEILING
MATERIAL LOCATIONS AND LAYOUT.
PT-3PT-1 PT-1 PT-1
AutoCAD SHX Text
SECURE
AutoCAD SHX Text
SALLYPORT
AutoCAD SHX Text
SECURE
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
CELL
AutoCAD SHX Text
CELL
AutoCAD SHX Text
CENTER
AutoCAD SHX Text
FIRE COMMAND
AutoCAD SHX Text
ENTRY
AutoCAD SHX Text
ATTORNEY
AutoCAD SHX Text
INT.
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text
SQUAD
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
PROCESS
AutoCAD SHX Text
PRISONERS'
AutoCAD SHX Text
MEALS
AutoCAD SHX Text
VAULT
AutoCAD SHX Text
CONTROL ROOM
AutoCAD SHX Text
LOCKER ROOM
AutoCAD SHX Text
ADMINISTRATION
AutoCAD SHX Text
CONFERENCE
AutoCAD SHX Text
EVIDENCE
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
STAIR #1
AutoCAD SHX Text
LOBBY
AutoCAD SHX Text
PUBLIC
AutoCAD SHX Text
IT CENTER
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
MEN
AutoCAD SHX Text
WOMEN
AutoCAD SHX Text
JANITOR
AutoCAD SHX Text
PUBLIC
AutoCAD SHX Text
AREA
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
CSO
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text
MECHANICAL
AutoCAD SHX Text
MAINTENANCE
AutoCAD SHX Text
MACHINE ROOM
AutoCAD SHX Text
ELEVATOR
AutoCAD SHX Text
MECHANICAL
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 151C
AutoCAD SHX Text 151A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
INT.
AutoCAD SHX Text
AutoCAD SHX Text
CELL
AutoCAD SHX Text
AutoCAD SHX Text
IT CENTER
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
JANITOR
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
CSO
AutoCAD SHX Text
OFFICE
AutoCAD SHX Text
MECHANICAL
AutoCAD SHX Text
MAINTENANCE
AutoCAD SHX Text
MACHINE ROOM
AutoCAD SHX Text
ELEVATOR
AutoCAD SHX Text
MECHANICAL
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
GSA PUBLIC BUILDINGS SERVICE
AutoCAD SHX Text
GREAT LAKES REGION
AutoCAD SHX Text
230 S. DEARBORN, SUITE 3512
AutoCAD SHX Text
CHICAGO, ILLINOIS 60604-1696
AutoCAD SHX Text
CERTIFICATIONS
AutoCAD SHX Text
GENERAL SERVICES ADMINISTRATION
AutoCAD SHX Text PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY. Do not remove this notice. Properly destroy documents when no longer needed.
AutoCAD SHX Text
AutoCAD SHX Text 1/4"=1'-0"
AutoCAD SHX Text 2'
AutoCAD SHX Text 4'
AutoCAD SHX Text 8'
AutoCAD SHX Text
NOT FOR CONSTRUCTION
AutoCAD SHX Text
AutoCAD SHX Text
LAURA BROWN
AutoCAD SHX Text
125 MARKET STREET
AutoCAD SHX Text
YOUNGSTOWN, OHIO 44503
AutoCAD SHX Text
OH0215ZZ
AutoCAD SHX Text
METRO CD
AutoCAD SHX Text
JENSEN HUGHES
AutoCAD SHX Text
KEY PLAN
AutoCAD SHX Text
REVISION NOTES
AutoCAD SHX Text
SHEET SIZE:
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text
DISCIPLINE
AutoCAD SHX Text
SHEET TYPE
AutoCAD SHX Text
SEQUENCE
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
DRAWING TITLE
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
CHECKED BY
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
GSA PM
AutoCAD SHX Text
SUB. DATE
AutoCAD SHX Text
SUBMISSION
AutoCAD SHX Text
TITLE
AutoCAD SHX Text BUILDING NOs.
AutoCAD SHX Text
OTHER
AutoCAD SHX Text
BUILDING NO.
AutoCAD SHX Text
CITY/ST./ZIP
AutoCAD SHX Text
STREET
AutoCAD SHX Text
NAME
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
SUB A/E
AutoCAD SHX Text
PRIME A/E
AutoCAD SHX Text
CONS. CONTR.
AutoCAD SHX Text
A/E CON. NO.
AutoCAD SHX Text
CONTRACTORS
AutoCAD SHX Text
GRAPHIC SCALE
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
FLOOR NO.
AutoCAD SHX Text
CONSTR. CON.
AutoCAD SHX Text
FACILITY CODE
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
A/E TASK NO.
AutoCAD SHX Text
CONS. WORK
AutoCAD SHX Text 30 X 42
AutoCAD SHX Text
GS-05P-17-SC-D-0004
AutoCAD SHX Text
100%%% CONSTRUCTION DRAWINGS
AutoCAD SHX Text 3/16/2022
AutoCAD SHX Text
MCD306
AutoCAD SHX Text 20054-001
AutoCAD SHX Text THOMAS D. LAMBROS FEDERAL BUILDING & U.S. COURTHOUSE FIRE ALARM SYSTEM REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PCN NUMBER
AutoCAD SHX Text
XXXXXX
AutoCAD SHX Text
THOMAS D. LAMBROS FEDERAL BUILDING & U.S. COURTHOUSE
AutoCAD SHX Text
1ST FLOOR ARCHITECTURAL PLANS-DETAILS
AutoCAD SHX Text
A-1-01.DWG
AutoCAD SHX Text
AutoCAD SHX Text
JAC
AutoCAD SHX Text
CWD
AutoCAD SHX Text A-1-01
AutoCAD SHX Text
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
PARTIAL FIRST FLOOR PLAN
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
PARTIAL FIRST FLOOR REFLECTED CEILING PLAN
1/4" = 1'-0"
DN
TELEPHONE
EQUIPMENT
ELECTRIC
EQUIPMENT
ELEVATOR
LOBBY
PUBLIC
STAIR #1
CLOSET
202A 203
206A
ELECTRIC
EQUIPMENT
202A
3 5 8"
RCP & FLOOR PLAN CODED NOTES:
1. REMOVE EXISTING CMU WALLS, FLOOR TILE, MASTICS, BASE, CEILING
ASSEMBLY, LOCKERS AND FURNISHINGS AS REQUIRED FOR NEW
WORK. PATCH AND PAINT EXISTING WALLS AS REQUIRED FOR NEW
WORK - REFERENCE WALL LEGEND.
2. REMOVE EXISTING DOOR, FRAME AND DOOR HARDWARE. PATCH AND
PAINT EXISTING WALL AS REQUIRED FOR NEW WORK, PAINT.
3. PROVIDE AND INSTALL NEW PARTITION WALL ASSEMBLY FROM
EXISTING FLOOR DECK TO EXISTING CEILING DECK ABOVE
(REFERENCE FLOOR PLAN FOR WALL WIDTH). PROVIDE AND INSTALL
NEW BASE AND PAINT WALL BOTH SIDES - REFERENCE WALL LEGEND
AND ROOM FINISH SCHEDULE.
4. INFILL EXISTING MASONRY OPENING WITH NEW 3 58" METAL STUDS
AND 58" F.C. GYPSUM BOARD EACH SIDE TO MATCH EXISTING WALL
PROFILES. PROVIDE AND INSTALL NEW MARBLE BASE TO MATCH
EXISTING AND PAINT WALL TO MATCH EXISTING, FULL LENGTH AND
HEIGHT OF WALL.
5. PROVIDE AND INSTALL NEW 2 12" METAL STUD FURRING AT 16" O.C.
WITH 58" F.C. GYPSUM BOARD TO 6" ABOVE CEILING. PROVIDE AND
INSTALL NEW BASE AND PAINT AT WALL - REFERENCE WALL LEGEND.
6. ALIGN NEW WALL ASSEMBLY AT CENTERLINE OF EXISTING ADJACENT
WALL ASSEMBLY.
7. PROVIDE AND INSTALL NEW DOOR, FRAME AND DOOR HARDWARE -
REFERENCE DOOR SCHEDULE AND DOOR SPECIFICATIONS.
8. PROVIDE AND INSTALL ALL NEW FLOOR, WALL AND CEILING FINISHES
IN THIS ROOM - REFERENCE ROOM FINISH SCHEDULE ON THIS
DRAWING SHEET.
9. REMOVE EXISTING RUBBER BASE AS REQUIRED FOR NEW WORK - FULL
LENGTH AND HEIGHT OF EXISTING WALL. PATCH, REPAIR, AND PREP
ALL SURFACES AS REQUIRED FOR NEW PAINT - REFERENCE MEP/FP
DRAWINGS FOR SCOPE OF WORK. PROVIDE AND INSTALL NEW PAINT
FULL LENGTH AND HEIGHT OF EXISTING WALL.
10. REMOVE EXISTING CMU WALL AREA AS REQUIRED FOR NEW DOOR
AND FRAME. SALVAGE EXISTING MARBLE BASE FOR REPLACEMENT AT
OTHER AREAS. PATCH, REPAIR AND PREP ALL FLOOR, WALL AND
CEILING SURFACES TO MATCH. PROVIDE AND INSTALL NEW PAINT TO
MATCH EXISTING, FULL LENGTH OF WALL.
11. REMOVE EXISTING WALLPAPER AND ABANDONED EXISTING WALL
ATTACHMENTS AS REQUIRED FOR NEW WORK, EXISTING MARBLE BASE
TO REMAIN - FULL LENGTH AND HEIGHT OF EXISTING WALL. PATCH,
REPAIR, AND PREP ALL SURFACES AS REQUIRED FOR NEW PAINT -
REFERENCE MEP/FP DRAWINGS FOR SCOPE OF WORK. PROVIDE AND
INSTALL NEW PAINT FULL LENGTH AND HEIGHT OF EXISTING WALL.
12. REMOVE ABANDONED EXISTING WALL ATTACHMENTS FROM EXISTING
CMU WALL AS REQUIRED FOR NEW WORK, EXISTING BASE TO REMAIN.
PATCH, REPAIR, AND PREP ALL CMU WALL SURFACES AS REQUIRED
FOR NEW PAINT - REFERENCE MEP/FP DRAWINGS FOR SCOPE OF
WORK. PROVIDE AND INSTALL NEW RUBBER BASE AND PAINT FULL
LENGTH AND HEIGHT OF EXISTING WALL.
13. REMOVE EXISTING STORAGE SHELVING AS REQUIRED FOR NEW WORK.
PATCH AND PAINT FULL LENGTH AND HEIGHT OF EXISTING WALL TO
MATCH EXISTING ADJACENT WALL.
14. PROVIDE AND INSTALL NEW ACT CEILING GRID AND TILE ASSEMBLY -
REFERENCE ROOM FINISH SCHEDULE AND SPECIFICATIONS.
15. PATCH, REPAIR, AND PREP ALL GYPSUM CEILING SURFACES AS
REQUIRED FOR NEW PAINT - REFERENCE MEP/FP DRAWINGS FOR
SCOPE OF WORK. PROVIDE AND INSTALL NEW PAINT OVER THE
ENTIRE CEILING IN THIS ROOM.
16. REMOVE ALL EXISTING WALLPAPER AND ABANDONED EXISTING WALL
ATTACHMENTS AS REQUIRED FOR NEW WORK IN THIS ROOM. PATCH,
PREP, AND REPAIR ALL SURFACES AS REQUIRED FOR NEW PAINT.
WALL LEGEND:
DEMOLISH AND REMOVE EXISTING WALL PARTITIONS,
DOORS, FRAMES AND ACCESSORIES AS REQUIRED FOR
NEW WORK. ALL NEW HORIZONTAL AND VERTICAL
CUTS SHALL BE IN A NEAT, STRAIGHT LINE.
EXISTING WALL PARTITIONS TO REMAIN. REFERENCE
ROOM FINISH SCHEDULE.
NEW WALL FURRING - PROVIDE AND INSTALL 2 12"
METAL FURRING STUDS AT 16" O.C. WITH (1) LAYER
8" GYPSUM BOARD TO 6" ABOVE NEW OR EXISTING
CEILING ASSEMBLY, PAINT. REFERENCE ROOM FINISH
SCHEDULE.
NEW 3 58" OR 6" METAL STUD PARTITION WALL (AS
NOTED ON THE DRAWING) - PROVIDE AND INSTALL
METAL STUDS AT 16" O.C. WITH (1) LAYER 58" F.C.
GYPSUM BOARD EACH SIDE TO INFILL EXISTING
OPENINGS OR FROM EXISTING FLOOR DECK TO
EXISTING CEILING DECK ABOVE, PAINT BOTH SIDES.
REFERENCE ROOM FINISH SCHEDULE.
NEW 7 58" CMU INFILL WALL - MATCH EXISTING CMU
PROFILES AND PAINT FULL LENGTH AND HEIGHT OF
WALL. PROVIDE NEW HORIZONTAL AND VERTICAL
CUTS IN A NEAT, STRAIGHT LINE - DO NOT TOOTH
INTO EXISTING CMU.
(NOTE: NOT ALL NOTES MAY APPLY TO THIS SHEET)
UP
DN
TELEPHONE
EQUIPMENT
ELECTRIC
EQUIPMENT
ELEVATOR
LOBBY
PUBLIC
STAIR #1
CLOSET
202A 203
206A
ELECTRIC
EQUIPMENT
UPDN
STAIR #2
STORAGE
CORRIDOR
STORAGE
COURT
MAGISTRATE
226A
STORAGE
230A
CORRIDOR
CORRIDOR
227A
UPDN
STAIR #2
STORAGE
CORRIDOR
STORAGE
COURT
MAGISTRATE
226A
STORAGE
230A
CORRIDOR
CORRIDOR
227A
226A
3 5 /8"
CORRIDOR
2ND FLOOR KEY PLAN
6611 Rockside Road | Suite 100 | Independence, OH 44131 O: 440-247-3770 www.jensenhughes.com
Metro CD Engineering, LLC 3510 Snouffer Rd, Suite 200 Columbus , OH 43235
614-923-3930 info@metrocdengineering.com
ISSUED FOR
100% CONSTRUCTION
DOCUMENTS
3/16/2022
SCOPE OF
WORK AREA
WORK AREA
SCOPE OF
A.7
A.7
44.7 4.74.9 4.95 5
A A
D D
6.3
C C
6 6.1 6.36 6.1
DOOR SCHEDULE
DOORS
SIZE
WIDTH HEIGHT
MATL. TYPE
FRAMES
MATL. TYPE
DETAIL
HEAD JAMB THRES.
FIRE RATING
LABEL (MINS.)
REMARKSDOOR
NUMBER
ROOM
NUMBER ROOM NAME FLOOR BASE
WALL
NORTH SOUTH EAST WEST
TELEPHONE EQUIPMENT
REMARKS
ROOM FINISH SCHEDULE
EXIST. MBL
CEILING
CEILING
HEIGHT
PT-3EX+NEW MBL202A 1., 2.9'-0"
2.
1 - FLUSH 1
DOOR ELEVATION FRAME ELEVATION DOOR SCHEDULE REMARKS
1. STAIN DOOR COLOR (BASIS OF DESIGN): TBD
2. PAINT DOOR FRAME COLOR (BASIS OF DESIGN): BENJAMIN MOORE - PT-2
3. INSTALL ROOM SIGNAGE FURNISHED BY TITLE AGENCY.
ROOM FINISH SCHEDULE REMARKSROOM FINISH LEGEND
ACT: ACOUSTIC CEILING TILE
CPT: CARPET (BASIS OF DESIGN): COLOR/PATTERN TBD
MBL: EXISTING MARBLE FLOORING, EXISTING AND NEW MARBLE
BASE TO MATCH EXISTING
PT: PAINT (BASIS OF DESIGN): SHERWIN-WILLIAMS, REFERENCE
ROOM FINISH SCHEDULE THIS SHEET FOR COLOR(S)
RB: RUBBER BASE (BASIS OF DESIGN): COLOR - BLACK
VCT: VINYL COMPOSITION FLOOR TILE (BASIS OF DESIGN): COLOR
TBD
GENERAL ROOM FINISH NOTES
A. PATCH CRACKS, REMOVE MASTICS, AND CLEAN
EXISTING CONCRETE FLOOR SLAB BEFORE APPLYING
FLOOR FINISHES.
B. PATCH EXISTING WALLS TO MATCH EXISTING ADJACENT
WALLS WHERE REQUIRED FOR NEW WORK.
C. REFER TO REFLECTED CEILING PLAN FOR CEILING
MATERIAL LOCATIONS AND LAYOUT.
1. REMOVE, CLEAN, AND RESET EXISTING MARBLE BASE AT
CORRIDOR AND LOBBY LOCATIONS WHEN POSSIBLE -
NEW MARBLE BASE TO MATCH EXISTING.
2. EXISTING BASE TO REMAIN AT EXISTING WALLS TO
REMAIN IN THIS ROOM.
3. PROVIDE AND INSTALL NEW RUBBER BASE AT NEW WALL
IN THIS ROOM.
PT-1 PT-1 PT-1 PT-1
202A 3'-0" 7'-0" SC WD 1 METAL 1 N/A N/A N/A N/A
STC
RATING
N/A
STORAGE
226A STORAGE PT-1 PT-1 PT-1 PT-1VCT RB; EXIST.
VCT230A 2.PT-1 PT-1 PT-1 PT-1 206A 3'-0" 7'-0" SC WD 1 METAL 1 N/A N/A N/A N/A N/A
1., 2., 3.
DOOR
HDWR.
SET 1
1., 2., 3.SET 1
6 6.1 6.3
SCOPE OF
9'-0" 9'-0"
PT-3
PT-3
RB; EXIST.
PAINT COLORS (BASIS OF DESIGN):
PT-1: WALLS: SHERWIN WILLIAMS - COLOR TBD
PT-2: DOOR FRAMES: SHERWIN WILLIAMS - COLOR TBD
PT-3: CEILING: SHERWIN WILLIAMS - COLOR TBD
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
GSA PUBLIC BUILDINGS SERVICE
AutoCAD SHX Text
GREAT LAKES REGION
AutoCAD SHX Text
230 S. DEARBORN, SUITE 3512
AutoCAD SHX Text
CHICAGO, ILLINOIS 60604-1696
AutoCAD SHX Text
CERTIFICATIONS
AutoCAD SHX Text
GENERAL SERVICES ADMINISTRATION
AutoCAD SHX Text PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY. Do not remove this notice. Properly destroy documents when no longer needed.
AutoCAD SHX Text
AutoCAD SHX Text 1/4"=1'-0"
AutoCAD SHX Text 2'
AutoCAD SHX Text 4'
AutoCAD SHX Text 8'
AutoCAD SHX Text
NOT FOR CONSTRUCTION
AutoCAD SHX Text
AutoCAD SHX Text
LAURA BROWN
AutoCAD SHX Text
125 MARKET STREET
AutoCAD SHX Text
YOUNGSTOWN, OHIO 44503
AutoCAD SHX Text
OH0215ZZ
AutoCAD SHX Text
METRO CD
AutoCAD SHX Text
JENSEN HUGHES
AutoCAD SHX Text
KEY PLAN
AutoCAD SHX Text
REVISION NOTES
AutoCAD SHX Text
SHEET SIZE:
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text
DISCIPLINE
AutoCAD SHX Text
SHEET TYPE
AutoCAD SHX Text
SEQUENCE
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
DRAWING TITLE
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
CHECKED BY
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
GSA PM
AutoCAD SHX Text
SUB. DATE
AutoCAD SHX Text
SUBMISSION
AutoCAD SHX Text
TITLE
AutoCAD SHX Text BUILDING NOs.
AutoCAD SHX Text
OTHER
AutoCAD SHX Text
BUILDING NO.
AutoCAD SHX Text
CITY/ST./ZIP
AutoCAD SHX Text
STREET
AutoCAD SHX Text
NAME
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
SUB A/E
AutoCAD SHX Text
PRIME A/E
AutoCAD SHX Text
CONS. CONTR.
AutoCAD SHX Text
A/E CON. NO.
AutoCAD SHX Text
CONTRACTORS
AutoCAD SHX Text
GRAPHIC SCALE
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
FLOOR NO.
AutoCAD SHX Text
CONSTR. CON.
AutoCAD SHX Text
FACILITY CODE
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
A/E TASK NO.
AutoCAD SHX Text
CONS. WORK
AutoCAD SHX Text 30 X 42
AutoCAD SHX Text
GS-05P-17-SC-D-0004
AutoCAD SHX Text
100%%% CONSTRUCTION DRAWINGS
AutoCAD SHX Text 3/16/2022
AutoCAD SHX Text
MCD306
AutoCAD SHX Text 20054-001
AutoCAD SHX Text THOMAS D. LAMBROS FEDERAL BUILDING & U.S. COURTHOUSE FIRE ALARM SYSTEM REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PCN NUMBER
AutoCAD SHX Text
XXXXXX
AutoCAD SHX Text
THOMAS D. LAMBROS FEDERAL BUILDING & U.S. COURTHOUSE
AutoCAD SHX Text
2ND FLOOR ARCHITECTURAL PLANS-DETAILS
AutoCAD SHX Text
A-2-01.DWG
AutoCAD SHX Text
AutoCAD SHX Text
JAC
AutoCAD SHX Text
CWD
AutoCAD SHX Text A-2-01
AutoCAD SHX Text
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
PARTIAL SECOND FLOOR PLAN
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
PARTIAL SECOND FLOOR REFLECTED CEILING PLAN
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
PARTIAL SECOND FLOOR PLAN
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
PARTIAL SECOND FLOOR REFLECTED CEILING PLAN
RCP & FLOOR PLAN CODED NOTES:
1. REMOVE EXISTING CMU WALLS, FLOOR TILE, MASTICS, BASE, CEILING
ASSEMBLY, LOCKERS AND FURNISHINGS AS REQUIRED FOR NEW
WORK. PATCH AND PAINT EXISTING WALLS AS REQUIRED FOR NEW
WORK - REFERENCE WALL LEGEND.
2. REMOVE EXISTING DOOR, FRAME AND DOOR HARDWARE. PATCH AND
PAINT EXISTING WALL AS REQUIRED FOR NEW WORK, PAINT.
3. PROVIDE AND INSTALL NEW PARTITION WALL ASSEMBLY FROM
EXISTING FLOOR DECK TO EXISTING CEILING DECK ABOVE
(REFERENCE FLOOR PLAN FOR WALL WIDTH). PROVIDE AND INSTALL
NEW BASE AND PAINT WALL BOTH SIDES - REFERENCE WALL LEGEND
AND ROOM FINISH SCHEDULE.
4. INFILL EXISTING MASONRY OPENING WITH NEW 3 58" METAL STUDS
AND 58" F.C. GYPSUM BOARD EACH SIDE TO MATCH EXISTING WALL
PROFILES. PROVIDE AND INSTALL NEW MARBLE BASE TO MATCH
EXISTING AND PAINT WALL TO MATCH EXISTING, FULL LENGTH AND
HEIGHT OF WALL.
5. PROVIDE AND INSTALL NEW 2 12" METAL STUD FURRING AT 16" O.C.
WITH 58" F.C. GYPSUM BOARD TO 6" ABOVE CEILING. PROVIDE AND
INSTALL NEW BASE AND PAINT AT WALL - REFERENCE WALL LEGEND.
6. ALIGN NEW WALL ASSEMBLY AT CENTERLINE OF EXISTING ADJACENT
WALL ASSEMBLY.
7. PROVIDE AND INSTALL NEW DOOR, FRAME AND DOOR HARDWARE -
REFERENCE DOOR SCHEDULE AND DOOR SPECIFICATIONS.
8. PROVIDE AND INSTALL ALL NEW FLOOR, WALL AND CEILING FINISHES
IN THIS ROOM - REFERENCE ROOM FINISH SCHEDULE ON THIS
DRAWING SHEET.
9. REMOVE EXISTING RUBBER BASE AS REQUIRED FOR NEW WORK - FULL
LENGTH AND HEIGHT OF EXISTING WALL. PATCH, REPAIR, AND PREP
ALL SURFACES AS REQUIRED FOR NEW PAINT - REFERENCE MEP/FP
DRAWINGS FOR SCOPE OF WORK. PROVIDE AND INSTALL NEW PAINT
FULL LENGTH AND HEIGHT OF EXISTING WALL.
10. REMOVE EXISTING CMU WALL AREA AS REQUIRED FOR NEW DOOR
AND FRAME. SALVAGE EXISTING MARBLE BASE FOR REPLACEMENT AT
OTHER AREAS. PATCH, REPAIR AND PREP ALL FLOOR, WALL AND
CEILING SURFACES TO MATCH. PROVIDE AND INSTALL NEW PAINT TO
MATCH EXISTING, FULL LENGTH OF WALL.
11. REMOVE EXISTING WALLPAPER AND ABANDONED EXISTING WALL
ATTACHMENTS AS REQUIRED FOR NEW WORK, EXISTING MARBLE BASE
TO REMAIN - FULL LENGTH AND HEIGHT OF EXISTING WALL. PATCH,
REPAIR, AND PREP ALL SURFACES AS REQUIRED FOR NEW PAINT -
REFERENCE MEP/FP DRAWINGS FOR SCOPE OF WORK. PROVIDE AND
INSTALL NEW PAINT FULL LENGTH AND HEIGHT OF EXISTING WALL.
12. REMOVE ABANDONED EXISTING WALL ATTACHMENTS FROM EXISTING
CMU WALL AS REQUIRED FOR NEW WORK, EXISTING BASE TO REMAIN.
PATCH, REPAIR, AND PREP ALL CMU WALL SURFACES AS REQUIRED
FOR NEW PAINT - REFERENCE MEP/FP DRAWINGS FOR SCOPE OF
WORK. PROVIDE AND INSTALL NEW RUBBER BASE AND PAINT FULL
LENGTH AND HEIGHT OF EXISTING WALL.
13. REMOVE EXISTING STORAGE SHELVING AS REQUIRED FOR NEW WORK.
PATCH AND PAINT FULL LENGTH AND HEIGHT OF EXISTING WALL TO
MATCH EXISTING ADJACENT WALL.
14. PROVIDE AND INSTALL NEW ACT CEILING GRID AND TILE ASSEMBLY -
REFERENCE ROOM FINISH SCHEDULE AND SPECIFICATIONS.
15. PATCH, REPAIR, AND PREP ALL GYPSUM CEILING SURFACES AS
REQUIRED FOR NEW PAINT - REFERENCE MEP/FP DRAWINGS FOR
SCOPE OF WORK. PROVIDE AND INSTALL NEW PAINT OVER THE
ENTIRE CEILING IN THIS ROOM.
16. REMOVE ALL EXISTING WALLPAPER AND ABANDONED EXISTING WALL
ATTACHMENTS AS REQUIRED FOR NEW WORK IN THIS ROOM. PATCH,
PREP, AND REPAIR ALL SURFACES AS REQUIRED FOR NEW PAINT.
WALL LEGEND:
DEMOLISH AND REMOVE EXISTING WALL PARTITIONS,
DOORS, FRAMES AND ACCESSORIES AS REQUIRED FOR
NEW WORK. ALL NEW HORIZONTAL AND VERTICAL
CUTS SHALL BE IN A NEAT, STRAIGHT LINE.
EXISTING WALL PARTITIONS TO REMAIN. REFERENCE
ROOM FINISH SCHEDULE.
NEW WALL FURRING - PROVIDE AND INSTALL 2 12"
METAL FURRING STUDS AT 16" O.C. WITH (1) LAYER
8" GYPSUM BOARD TO 6" ABOVE NEW OR EXISTING
CEILING ASSEMBLY, PAINT. REFERENCE ROOM FINISH
SCHEDULE.
NEW 3 58" OR 6" METAL STUD PARTITION WALL (AS
NOTED ON THE DRAWING) - PROVIDE AND INSTALL
METAL STUDS AT 16" O.C. WITH (1) LAYER 58" F.C.
GYPSUM BOARD EACH SIDE TO INFILL EXISTING
OPENINGS OR FROM EXISTING FLOOR DECK TO
EXISTING CEILING DECK ABOVE, PAINT BOTH SIDES.
REFERENCE ROOM FINISH SCHEDULE.
NEW 7 58" CMU INFILL WALL - MATCH EXISTING CMU
PROFILES AND PAINT FULL LENGTH AND HEIGHT OF
WALL. PROVIDE NEW HORIZONTAL AND VERTICAL
CUTS IN A NEAT, STRAIGHT LINE - DO NOT TOOTH
INTO EXISTING CMU.
(NOTE: NOT ALL NOTES MAY APPLY TO THIS SHEET)
DN
EQUIPMENT
TELEPHONE
EQUIPMENT
ELECTRIC
LOBBY
ELEVATOR
PUBLIC
STAIR #1
302A 303
EQUIPMENT
ELECTRIC
302A
3 5 8"
DN
EQUIPMENT
TELEPHONE
EQUIPMENT
ELECTRIC
LOBBY
ELEVATOR
PUBLIC
STAIR #1
302A 303
EQUIPMENT
ELECTRIC
3RD FLOOR KEY PLAN
6611 Rockside Road | Suite 100 | Independence, OH 44131 O: 440-247-3770 www.jensenhughes.com
Metro CD Engineering, LLC 3510 Snouffer Rd, Suite 200 Columbus , OH 43235
614-923-3930 info@metrocdengineering.com
ISSUED FOR
100% CONSTRUCTION
DOCUMENTS
3/16/2022
WORK AREA
SCOPE OF
A.7
A.7
44.7 4.74.9 4.95.0 5.0
A A
DOOR SCHEDULE
DOORS
SIZE
WIDTH HEIGHT
MATL. TYPE
FRAMES
MATL. TYPE
DETAIL
HEAD JAMB THRES.
FIRE RATING
LABEL (MINS.)
REMARKSDOOR
NUMBER
ROOM
NUMBER ROOM NAME FLOOR BASE
WALL
NORTH SOUTH EAST WEST
TELEPHONE EQUIPMENT
REMARKS
ROOM FINISH SCHEDULE
CEILING
CEILING
HEIGHT
PT-3302A 1.(+/-) 9'-0"
1 - FLUSH 1
DOOR ELEVATION FRAME ELEVATION DOOR SCHEDULE REMARKS
1. STAIN DOOR COLOR (BASIS OF DESIGN): TBD
2. PAINT DOOR FRAME COLOR (BASIS OF DESIGN): BENJAMIN MOORE - PT-2
3. INSTALL ROOM SIGNAGE FURNISHED BY TITLE AGENCY.
ROOM FINISH SCHEDULE REMARKSROOM FINISH LEGEND GENERAL ROOM FINISH NOTES
PT-1 PT-1 PT-1 PT-1
302A 3'-0" 7'-0" SC WD 1 METAL 1 N/A N/A N/A N/A
STC
RATING
N/A 1., 2., 3.
DOOR
HDWR.
SET 1
A. PATCH CRACKS, REMOVE MASTICS, AND CLEAN
EXISTING CONCRETE FLOOR SLAB BEFORE APPLYING
FLOOR FINISHES.
B. PATCH EXISTING WALLS TO MATCH EXISTING ADJACENT
WALLS WHERE REQUIRED FOR NEW WORK.
C. REFER TO REFLECTED CEILING PLAN FOR CEILING
MATERIAL LOCATIONS AND LAYOUT.
ACT: ACOUSTIC CEILING TILE
CPT: CARPET (BASIS OF DESIGN): COLOR/PATTERN TBD
MBL: EXISTING MARBLE FLOORING, EXISTING AND NEW MARBLE
BASE TO MATCH EXISTING
PT: PAINT (BASIS OF DESIGN): SHERWIN-WILLIAMS, REFERENCE
ROOM FINISH SCHEDULE THIS SHEET FOR COLOR(S)
RB: RUBBER BASE (BASIS OF DESIGN): COLOR - BLACK
VCT: VINYL COMPOSITION FLOOR TILE (BASIS OF DESIGN): COLOR
TBD
PAINT COLORS (BASIS OF DESIGN):
PT-1: WALLS: SHERWIN WILLIAMS - COLOR TBD
PT-2: DOOR FRAMES: SHERWIN WILLIAMS - COLOR TBD
PT-3: CEILING: SHERWIN WILLIAMS - COLOR TBD
EXIST. MBL EX+NEW MBL
1. REMOVE, CLEAN, AND RESET EXISTING MARBLE BASE AT
CORRIDOR AND LOBBY LOCATIONS WHEN POSSIBLE -
NEW MARBLE BASE TO MATCH EXISTING.
2. EXISTING BASE TO REMAIN AT EXISTING WALLS TO
REMAIN IN THIS ROOM.
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
GSA PUBLIC BUILDINGS SERVICE
AutoCAD SHX Text
GREAT LAKES REGION
AutoCAD SHX Text
230 S. DEARBORN, SUITE 3512
AutoCAD SHX Text
CHICAGO, ILLINOIS 60604-1696
AutoCAD SHX Text
CERTIFICATIONS
AutoCAD SHX Text
GENERAL SERVICES ADMINISTRATION
AutoCAD SHX Text PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY. Do not remove this notice. Properly destroy documents when no longer needed.
AutoCAD SHX Text
AutoCAD SHX Text 1/4"=1'-0"
AutoCAD SHX Text 2'
AutoCAD SHX Text 4'
AutoCAD SHX Text 8'
AutoCAD SHX Text
NOT FOR CONSTRUCTION
AutoCAD SHX Text
AutoCAD SHX Text
LAURA BROWN
AutoCAD SHX Text
125 MARKET STREET
AutoCAD SHX Text
YOUNGSTOWN, OHIO 44503
AutoCAD SHX Text
OH0215ZZ
AutoCAD SHX Text
METRO CD
AutoCAD SHX Text
JENSEN HUGHES
AutoCAD SHX Text
KEY PLAN
AutoCAD SHX Text
REVISION NOTES
AutoCAD SHX Text
SHEET SIZE:
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text
DISCIPLINE
AutoCAD SHX Text
SHEET TYPE
AutoCAD SHX Text
SEQUENCE
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
DRAWING TITLE
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
CHECKED BY
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
GSA PM
AutoCAD SHX Text
SUB. DATE
AutoCAD SHX Text
SUBMISSION
AutoCAD SHX Text
TITLE
AutoCAD SHX Text BUILDING NOs.
AutoCAD SHX Text
OTHER
AutoCAD SHX Text
BUILDING NO.
AutoCAD SHX Text
CITY/ST./ZIP
AutoCAD SHX Text
STREET
AutoCAD SHX Text
NAME
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
SUB A/E
AutoCAD SHX Text
PRIME A/E
AutoCAD SHX Text
CONS. CONTR.
AutoCAD SHX Text
A/E CON. NO.
AutoCAD SHX Text
CONTRACTORS
AutoCAD SHX Text
GRAPHIC SCALE
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
FLOOR NO.
AutoCAD SHX Text
CONSTR. CON.
AutoCAD SHX Text
FACILITY CODE
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
A/E TASK NO.
AutoCAD SHX Text
CONS. WORK
AutoCAD SHX Text 30 X 42
AutoCAD SHX Text
GS-05P-17-SC-D-0004
AutoCAD SHX Text
100%%% CONSTRUCTION DRAWINGS
AutoCAD SHX Text 3/16/2022
AutoCAD SHX Text
MCD306
AutoCAD SHX Text 20054-001
AutoCAD SHX Text THOMAS D. LAMBROS FEDERAL BUILDING & U.S. COURTHOUSE FIRE ALARM SYSTEM REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PCN NUMBER
AutoCAD SHX Text
XXXXXX
AutoCAD SHX Text
THOMAS D. LAMBROS FEDERAL BUILDING & U.S. COURTHOUSE
AutoCAD SHX Text
3RD FLOOR ARCHITECTURAL PLANS-DETAILS
AutoCAD SHX Text
A-3-01.DWG
AutoCAD SHX Text
AutoCAD SHX Text
JAC
AutoCAD SHX Text
CWD
AutoCAD SHX Text A-3-01
AutoCAD SHX Text
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
PARTIAL THIRD FLOOR PLAN
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
ARCHITECTURAL
AutoCAD SHX Text
PARTIAL THIRD FLOOR REFLECTED CEILING PLAN
jtoth Snapshot
6611 Rockside Road | Suite 100 | Independence, OH 44131 O: 440-247-3770 www.jensenhughes.com
Metro CD Engineering, LLC
3510 Snouffer Rd, Suite 200
Columbus , OH 43235
614-923-3930 info@metrocdengineering.com
ISSUED FOR
100% CONSTRUCTION
DOCUMENTS
3/16/2022
PROPERTY OF THE UNITED STATES GOVERNMENT
COPYING, DISSEMINATION, OR DISTRIBUTION OF THESE
DRAWINGS, PLANS, OR SPECIFICATIONS TO UNAUTHORIZED
USERS IS PROHIBITED
Do not remove this notice
Properly destroy documents when no longer needed
ELECTRICAL & TECHNOLOGY ABBREVIATIONS
A AMPERE
AC "ABOVE THE COUNTERTOP." DEFAULT HEIGHT
= 42". FIELD VERIFY EXACT HEIGHT.
AF "AT FLOOR." AT THE BOTTOM OF THE WALL
PERPENDICULAR TO THE FINISHED FLOOR.
AFF ABOVE FINISHED FLOOR
AFG ABOVE FINISHED GRADE
AHJ AUTHORITY HAVING JURISDICTION
CB CIRCUIT BREAKER
CKT CIRCUIT
D DEMO DEVICE
E EXISTING TO REMAIN
EF EXHAUST FAN
EM EMERGENCY
EMT ELECTRIC METAL TUBING
FA FIRE ALARM
FMC FLEXIBLE METALLIC TUBING
GF GROUND FAULT INTERRUPTER
GRD GROUND
MD MOTORIZED DAMPER
NF NON-FUSED
NL NIGHT LIGHT. CIRCUIT NL FIXTURE AHEAD OF
ALL SWITCHING AND / OR CONTROLS
NX NEW LOCATION, NEW DEVICE, REPLACE EX
PVC POLYVINYL CHLORIDE CONDUIT
RE RELOCATE EXISTING
RMC RIGID METAL CONDUIT
RR REMOVE & REPLACE ON NEW SURFACE
SD SMOKE DETECTOR
SM SURFACE MOUNTED
ST SHUNT-TRIP
T TELEPHONE SERVICE
TV TELEVISION
XFMR TRANSFORMER
W WIRE
WG WIRE GUARD
WP WEATHERPROOF
XX" HEIGHT ABOVE THE FINISHED FLOOR
DESCRIPTIONSYMBOL
WP
SYMBOL DESCRIPTION
S
S
GF/WP
GF
THREE-WAY SWITCH @48" A.F.F., 20A, 125V OR
277V UNLESS NOTED OTHERWISE. (AS REQUIRED
FOR VOLTAGE OF LOAD)
DUPLEX RECEPTACLE @18" A.F.F, 20A, 125V
UNLESS NOTED OTHERWISE
DUPLEX RECEPTACLE WITH GROUND FAULT
CIRCUIT INTERRUPTER @18" A.F.F.; 20A, 125V
UNLESS NOTED OTHERWISE
DUPLEX RECEPTACLE W/ GROUND FAULT CIRCUIT
INTERRUPTER @18" A.F.F.; 20A, 125V AND
WEATHERPROOF INSTALLATION UNLESS NOTED
OTHERWISE
SPECIAL RECEPTACLE, COORDINATE NEMA
CONFIGURATION. WITH EQUIPMENT UNLESS
NOTED OTHERWISE. VERIFY MOUNTING HEIGHT.
JUNCTION BOX MOUNTED AS NOTED
MOTOR CONNECTION (WIRED BY E.C.)
MAKE ALL CONNECTIONS AS INDICATED ON
DRAWINGS
208/120V, 3Ø, 4W ELECTRICAL PANEL
480/277V, 3Ø, 4W ELECTRICAL PANEL
NEMA 3R DISCONNECT SWITCH
DISCONNECT SWITCH
ELECTRICAL & TECHNOLOGY LEGEND
J
THERMOSTAT
T
COMBINATION MOTOR STARTER DISCONNECT.
UT UNDERGROUND TELECOM
UE UNDERGROUND ELECTRIC
PC POWER COMPANY
EC ELECTRICAL CONTRACTOR
FUSED DISCONNECT
S
T
DIGITAL TIMER SWITCH FOR MECHANICAL AND
UTILITY ROOMS. PRESET SHALL BE: ONE TAP:
60 MINUTE, TEN MINUTE WARNING WITH BLINKING
LIGHTS, FOLLOWED BY 5 MINUTE WARNING, TWO
TAPS: TWO HOURS BEFORE THE LIGHTS WILL BLINK
TO INDICATE THAT TIME IS EXPIRING AND LIGHTS
WILL TURN OFF, OTHER PRESETS AVAILABLE
CEILING MOUNTED DUAL TECHNOLOGY
PASSIVE INFRARED AND ULTRASONIC OCCUPANCY
SENSOR
OS
CR
CARD READER
S
LOW VOLTAGE DIMMER
125V UNLESS NOTED OTHERWISE. (AS REQUIRED)
D
S
WALL MOUNTED OCCUPANCY SENSOROS
NTS NOT TO SCALE
VOICE, DATA, RADIO PORT
WIRELESS ACCESS POINT - ABOVE CEILING
IG ISOLATED GROUND
ED EXISTING TO BE DEMOLISHED
ELECTRICAL DEFINITIONS
1. "CONTRACTOR" OR "EC" - UNLESS SPECIFICALLY STATED OTHERWISE.
2. "SUPPLY" - TO FURNISH.
3. "INSTALL" - TO TAKE PARTS, MATERIALS AND ALL RELATED ACCESSORIES THAT HAVE
BEEN FURNISHED AND ACCORDING TO THE MANUFACTURE'S RECOMMENDATIONS;
ASSEMBLE, CONNECT, SECURE, TEST, AND PROVIDE ALL LABOR NECESSARY TO MAKE
THE FURNISHED MATERIALS, PARTS AND ACCESSORIES OPERATIONAL.
4. "PROVIDE" - TO FURNISH, INSTALL, AND SUPPLY ALL ADDITIONAL MATERIALS AND
COMPLETE ALL ADDITIONAL WORK REQUIRED TO MAKE OPERATIONAL.
5. "TIE" - CONNECT TO CIRCUIT INDICATED.
6. "U.N.O." - UNLESS NOTED OTHERWISE
A/E ARCHITECT AND ENGINEER
GENERAL ELECTRICAL NOTES
1. ALL WORK IS TO COMPLY WITH ALL FEDERAL REGULATIONS AND STANDARDS, 2017
NATIONAL ELECTRICAL CODE, INTERNATIONAL CODE COUNCIL (ICC), AND THE NATIONAL
BOARD OF FIRE UNDERWRITERS.
2. COORDINATE AND SCHEDULE WORK WITH OTHER TRADES.
3. THIS CONTRACTOR SHALL VISIT THE SITE AND BECOME FULLY INFORMED OF EXISTING
CONDITIONS PRIOR TO SUBMITTING BID AND COMMENCING CONSTRUCTION. THIS
CONTRACTOR SHALL NOT SEEK ADDITIONAL COSTS ASSOCIATED WITH EXISTING
CONDITIONS FOR FAILURE TO VISIT THE SITE AND BECOME FULLY INFORMED OF EXISTING
CONDITIONS AFTER CONSTRUCTION HAS COMMENCED. THIS CONTRACTOR SHALL NOTIFY
THE ARCHITECT OF ANY DISCREPANCIES BETWEEN THESE DRAWINGS AND EXISTING
CONDITIONS FOR CLARIFICATIONS PRIOR TO COMMENCING WORK.
4. DRAWINGS ARE DIAGRAMMATIC. DETERMINE ACTUAL CONDITIONS (INCLUDING PRECISE
LOCATIONS OF EXISTING DEVICES) OF WORK AT THE SITE BY FIELD MEASUREMENT PRIOR
TO BID.
5. ALL WIRING AND CABLING ROUTED THROUGH OR LOCATED WITHIN THE PLENUM SHALL BE
PLENUM RATED.
ELECTRICAL & TECHNOLOGY LEGEND NOTES:
1. MOUNTING HEIGHTS INDICATED ARE TO THE CENTER OF THE DEVICE OR FIXTURE.
2. MOUNTING HEIGHTS ARE TYPICAL UNLESS NOTED OTHERWISE ON THE FLOOR PLANS.
3. REFER TO ARCHITECTURAL ELEVATIONS FOR ADDITIONAL INFORMATION ON EXACT
DEVICE AND FIXTURE LOCATIONS, MOUNTING HEIGHTS, AND COORDINATION WITH
ARCHITECTURAL HARDWARE AND FIXTURES.
4. NOT ALL SYMBOLS APPLY.
WAP
FLOOR BOX WITH DATA PORT
N NEW DEVICE AS INDICATED
FLR FLOOR MOUNTED
GTD GENERATOR TRANSFER DEVICE
BFC BELOW FINISHED CEILING
T.V. OUTLET, 18" AFF
TV
QUAD RECEPTACLE @18" A.F.F, 20A, 125V
UNLESS NOTED OTHERWISE
IG
ISOLATED GROUND DUPLEX RECEPTACLE
@18"AFF, 20A 125V UNO. RECEPTACLE AND
COVER PLATE SHALL BE ORANGE IN COLOR.
LEGEND NOTES:
1. NOT ALL SYMBOLS APPLY.
2. REFER TO ELECTRICAL AND TECHNICAL ABBREVIATIONS TABLE FOR
ADDITIONAL CLARIFICATION OF SYMBOLS SHOWN IN ABOVE TABLE
ON THIS SHEET.
H/S HORN AND STOBE FIRE ALARM DEVICE
EXIT SIGN
PB
PUSH BUTTON WALL SWITCH, ADA COMPIANT
ELECTRICAL & TECHNOLOGY ABBREVIATIONS
AC "ABOVE THE COUNTERTOP.
DEFAULT= 42, FIELD VERIFY.
AF "AT FLOOR." BOTTOM OF THE WALL
PERPENDICULAR TO THE FINISHED FLOOR.
A/E ARCHITECT AND ENGINEER
AFF ABOVE FINISHED FLOOR
AFG ABOVE FINISHED GRADE
AHJ AUTHORITY HAVING JURISDICTION
AHU AIR HANDLING UNIT
BFC BELOW FINISHED CEILING
BT BEAM TRANSMITTER
CB CIRCUIT BREAKER
CKT CIRCUIT
CUH CABINET UNIT HEATER
D DIMMER SWITCH
E EXISTING TO REMAIN
EC ELECTRICAL CONTRACTOR
ED EXISTING TO BE DEMOLISHED
EF EXHAUST FAN
EM EMERGENCY
EMT ELECTRIC METAL TUBING
EWC ELECTRIC WATER COOLER
EWH ELECTRIC WATER HEATER
FA FIRE ALARM
FLR FLOOR MOUNTED
FMC FLEXIBLE METALLIC TUBING
GF GROUND FAULT INTERRUPTER
GRD GROUND
SD SMOKE DETECTOR
SM SURFACE MOUNTED
ST SHUNT-TRIP
T TELEPHONE SERVICE
TV TELEVISION
UT UNDERGROUND TELECOM
UE UNDERGROUND ELECTRIC
NTS NOT TO SCALE
W WIRE
WC "WATER COOLER" ALSO REFERRED AS WATER
FOUNTAIN.
WG WIRE GUARD
WP WEATHERPROOF
XFMR TRANSFORMER
XX" HEIGHT ABOVE THE FINISHED FLOOR
IG ISOLATED GROUND
MAU MAKE-UP AIR UNIT
MD MOTORIZED DAMPER
N NEW DEVICE AS INDICATED
NF NON-FUSED
GTD GENERATOR TRANSFER DEVICE
NL NIGHT LIGHT
NX NEW LOCATION OF EXISTING RELOCATED
PC POWER COMPANY
RCPT RECEPTACLE
PVC POLYVINYL CHLORIDE CONDUIT
RE RELOCATE EXISTING
RMC RIGID METAL CONDUIT
RR REMOVE & REPLACE ON NEW SURFACE
RTU ROOFTOP UNIT
MICHAEL
CHOW
E-64993
S
T
A
T
E
OF
O
H
I
O
R
E
G
I
S T
E
R
E
D
P
R
O
F
E
S
S
I
O
N
AL
E
N
G
I
N
E
E
R
AutoCAD SHX Text
AutoCAD SHX Text
LAURA BROWN
AutoCAD SHX Text
125 MARKET STREET
AutoCAD SHX Text
YOUNGSTOWN, OHIO 44503
AutoCAD SHX Text
OH0215ZZ
AutoCAD SHX Text
METRO CD
AutoCAD SHX Text
JENSEN HUGHES
AutoCAD SHX Text
GSA PUBLIC BUILDINGS SERVICE
AutoCAD SHX Text
GREAT LAKES REGION
AutoCAD SHX Text
230 S. DEARBORN, SUITE 3512
AutoCAD SHX Text
CHICAGO, ILLINOIS 60604-1696
AutoCAD SHX Text
CERTIFICATIONS
AutoCAD SHX Text
KEY PLAN
AutoCAD SHX Text
REVISION NOTES
AutoCAD SHX Text
GENERAL SERVICES ADMINISTRATION
AutoCAD SHX Text PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY. Do not remove this notice. Properly destroy documents when no longer needed.
AutoCAD SHX Text
SHEET SIZE:
AutoCAD SHX Text
SHEET
AutoCAD SHX Text
OF
AutoCAD SHX Text
DISCIPLINE
AutoCAD SHX Text
SHEET TYPE
AutoCAD SHX Text
SEQUENCE
AutoCAD SHX Text
DRAWING NO.
AutoCAD SHX Text
DRAWING TITLE
AutoCAD SHX Text
FILE NAME
AutoCAD SHX Text
CHECKED BY
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
GSA PM
AutoCAD SHX Text
SUB. DATE
AutoCAD SHX Text
SUBMISSION
AutoCAD SHX Text
TITLE
AutoCAD SHX Text BUILDING NOs.
AutoCAD SHX Text
OTHER
AutoCAD SHX Text
BUILDING NO.
AutoCAD SHX Text
CITY/ST./ZIP
AutoCAD SHX Text
STREET
AutoCAD SHX Text
NAME
AutoCAD SHX Text
DRAWING
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
SUB A/E
AutoCAD SHX Text
PRIME A/E
AutoCAD SHX Text
CONS. CONTR.
AutoCAD SHX Text
A/E CON. NO.
AutoCAD SHX Text
CONTRACTORS
AutoCAD SHX Text
GRAPHIC SCALE
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
FLOOR NO.
AutoCAD SHX Text
CONSTR. CON.
AutoCAD SHX Text
FACILITY CODE
AutoCAD SHX Text
PROJECT
AutoCAD SHX Text
A/E TASK NO.
AutoCAD SHX Text
CONS. WORK
AutoCAD SHX Text 30 X 42
AutoCAD SHX Text
GS-05P-17-SC-D-0004
AutoCAD SHX Text
100%%% CONSTRUCTION DRAWINGS
AutoCAD SHX Text 3/16/2022
AutoCAD SHX Text
MCD306
AutoCAD SHX Text 20054-001
AutoCAD SHX Text THOMAS D. LAMBROS FEDERAL BUILDING & U.S. COURTHOUSE FIRE ALARM SYSTEM REPLACEMENT
AutoCAD SHX Text
AutoCAD SHX Text 1/8"=1'-0"
AutoCAD SHX Text 4'
AutoCAD SHX Text 8'
AutoCAD SHX Text 16'
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PCN NUMBER
AutoCAD SHX Text
XXXXXX
AutoCAD SHX Text
THOMAS D. LAMBROS FEDERAL BUILDING & U.S. COURTHOUSE
AutoCAD SHX Text
ELECTRICAL & TECHNOLOGY LEGENDS
AutoCAD SHX Text
AutoCAD SHX Text N/A
AutoCAD SHX Text
MMM
AutoCAD SHX Text E001
J
J
J
J
6611 Rockside Road | Suite 100 | Independence, OH 44131 O: 440-247-3770 www.jensenhughes.com
Metro CD Engineering, LLC
3510 Snouffer Rd, Suite 200
Columbus , OH 43235
614-923-3930 info@metrocdengineering.com
ISSUED FOR
100% CONSTRUCTION
DOCUMENTS
3/16/2022
PROPERTY OF THE UNITED STATES GOVERNMENT
COPYING, DISSEMINATION, OR DISTRIBUTION OF THESE
DRAWINGS, PLANS, OR SPECIFICATIONS TO UNAUTHORIZED
USERS IS PROHIBITED
Do not remove this notice
Properly destroy documents when no longer needed
1. PROVIDE AND INSTALL CONDUCTOR CONDUIT AND DISCONNECT SWITCH: (N)AC-1,
DUCTLESS SPLIT SYSTEM AC UNIT: POWERED FROM CU-1 UNIT. COORDINATE WITH
HVAC CONTRACTOR TO PROVIDE CONDUIT AND CONDUCTOR TO (N)CU-1 LOCATED IN
SECURE PARKING 105. 2-#12, GND, 3/4"C, HEAVY DUTY 20A 2-POLE TOGGLE SWITCH.
2. PROVIDE AND INSTALL CONDUCTOR CONDUIT AND DISCONNECT SWITCH: (N)CU-1,
DUCTLESS SPLIT SYSTEM CONDENSING UNIT: 240V/1P, MCA/MOCP=11A/15A. (E) PANEL
P2 / 10, (2)#12, GND, 3/4"C + 30A UN-FUSED DISCONNECT SWITCH.
3. EXISTING TO REMAIN RECEPTACLES AND DATA JACKS @ 18" AFF. COORDINATE WITH
FA INSTALLER TO RELOCATE AS NEEDED TO ACCOMMODATE FA PANEL INSTALL.
4. PROVIDE AND INSTALL CONDUCTOR CONDUIT AND 20kVA POWER CONDITIONER FOR
NEW PANEL EM. SEE SINGLE LINE, SHEET E602.
5. PROVIDE AND INSTALL CONDUCTOR CONDUIT AND POWER PANEL: PROVIDE NEW
208V/120V 225A 3P/4W, EMERGENCY POWER PANEL ( EM ) IN FIRE COMMAND CENTER.
SEE SCHEDULES SHEET E601 & SINGLE LINE E602.
6. PROVIDE AND INSTALL CONDUCTOR CONDUIT: 20A BRANCH CIRCUITS FROM NEW
PANEL EM TO WALL MOUNTED FIRE ALARM PANELS. SEE SCHEDULES SHEET E601.
PROVIDE AND INSTALL 30A 120V 1P/2W UN-FUSED DISCONNECT SWITCH AT NEW FACP
INSTALLED IN LOCKER RM 105.
7. PROVIDE AND INSTALL CONDUCTOR CONDUIT AND REMOTE SHUNT-TRIP ELEVATOR
DISCONNECT SWITCHES. COORDINATE WITH FIRE ALARM CONTRACTOR AND
ELEVATOR MAINTENANCE VENDOR TO REPLACE EXISTING ELEVATOR POWER SAFETY
DISCONNECT SWITCHES WITH SHUNT-TRIP / REMOTE TRIP OPERATED DISCONNECT
SWITCHES SIZED ON CAPACITY OF EXISTING DISCONNECTS. COORDINATE WITH FA
INSTALLER ON INTEGRATING SHUNT TRIP DISCONNECT WITH FA SYSTEM. SEE
SPECIFICATIONS ON SPECIFIC REQUIREMENTS. SEE SINGLE LINE SHEET E602.
8. HVAC INSTALLER RELOCATING EXISTING BAS PANELS FROM ADJACENT ROOM.
PROVIDE AND INSTALL CONDUCTOR AND CONDUIT TO RELOCATE EXISTING BAS PANEL
BRANCH CIRCUITS, INCLUDING DEDICATED WALL MOUNTED QUAD RECEPTACLES .
COORDINATE WITH FACILITIES AND HVAC INSTALLER FOR RELOCATION OF BAS
EQUIPMENT TO FIRST FLOOR MECHANICAL ROOM. EXTEND EXISTING BRANCH
CIRCUITS SERVING EQUIPMENT TO NEW LOCATION. PROVIDE NEW DATA
9. PROVIDE AND INSTALL CONDUCTOR, CONDUIT, DISCONNECT SWITCH, AND BUS TAP
MATERIALS TO PROVIDE BUS TAP TYPE CONNECTIONS AT SERVICE ENTRANCE
PORTION OF MAIN SWITCHBOARD. PROVIDE AND INSTALL 225A 3P/4W DISCONNECT
SWITCH FOR NEW EM PANEL / POWER CONDITIONER. SEE SINGLE LINE DIAGRAM
SHEET E602.
10. FIRE COMMAND CENTER: ALL CEILING AND WALL PENETRATIONS TO BE 1 HR FIRE
RATED. REFERENCE SPEC SECTION 07 84 00 - FIRESTOPPING PENETRATIONS, JOINTS
AND PERIMETER FIRE BARRIERS
11. NEW RECEPTACLES SERVING NEW CSO OFFICE ARE NOT TO BE INSTALLED BEHIND
DOOR. VERIFY EXACT LOCATIONS WITH OWNER.
12. PROVIDE AND INSTALL ALL MATERIALS TO RELOCATE EXISTING SECURITY PANEL, TO
INCLUDE EXTENDING SECURITY WIRING AND POWER. COORDINATE WITH GSA AND
CSO ON RELOCATION OF SECURITY PANEL TO NEW CSO OFFICE. MOUNT PANEL @ 55"
AFF, LOCATED ABOVE LIGHT SWITCH. VERIFY DESIRED LOCATION.
1. ELECTRICAL CONTRACTOR SHALL VERIFY ALL EXISTING TO REMAIN DEVICES ARE
FULLY FUNCTIONING UPON COMPLETION OF WORK.
2. ALL CABLING AND WIRING ABOVE CEILING NOT IN CONDUIT SHALL BE PLENUM
RATED.
3. ALL ELECTRICAL TO MEET N.E.C. CODE REQUIREMENTS FOR TELECOMMUNICATION
WORK THAT COMPLY'S WITH TIA/EIA STANDARDS.
4. SEE SHEET E-0-01 FOR ELECTRICAL AND TECHNOLOGY LEGEND AND
ABBREVIATIONS.
5. SEE SHEET E-0-01 FOR ELECTRICAL NOTES.
6. PROVIDE ENGRAVED LABEL ON ALL RECEPTACLE COVER PLATES INDICATING
PANEL CIRCUIT THAT SERVES RECEPTACLE.
7. CONTRACTOR SHALL PROVIDE AN UPDATED, TYPEWRITTEN PANEL SCHEDULE FOR
ALL PANELBOARDS (POWER AND LIGHTING) SERVING THE PROJECT AREA,
INDICATING ALL NEW AND EXISTING CIRCUIT NUMBERS AND ASSOCIATED
DEVICES/FIXTURES REFLECTING AS-BUILT CONDITIONS.
8. RECEPTACLE SHALL BE ON A DEDICATED CIRCUIT IF NOTED.
9. ALL DATA AND POWER RECEPTACLES INSTALLED 18" AFF UNLESS OTHERWISE
DIRECTED.
PLAN NOTES
CODED NOTES
E101
SCALE: 1/8" = 1'-0"
ELECTRICAL & TECHNOLOGY PLAN - 1ST FL.
N
E101
SCALE: 1/2" = 1'-0"
ELECTRICAL PLAN, FIRE COMMAND CENTER, MAINT OFFICE, CSO RM
N
E101
MICHAEL
CHOW
E-64993
S
T
A
T
E
OF
O
H
I
O
R
E
G
I
S T
E
R
E
D
P
R
O
F
E
S
S
I
O
N
AL
E
N
G
I
N
E
E
R
AutoCAD SHX Text N/A
AutoCAD SHX Text
AutoCAD SHX Text
(N)PNL EM/3, 2#12, GND, 3/4"C
AutoCAD SHX Text
(N)PNL EM/1, 2#12, GND, 3/4"C
AutoCAD SHX Text
(N)PNL EM/5, 2#12, GND, 3/4"C
AutoCAD SHX Text
(N)PNL EM/2, 2#12, GND, 3/4"C
AutoCAD SHX Text
NAC
AutoCAD SHX Text
NAC
AutoCAD SHX Text
FACP
AutoCAD SHX Text
AMP
AutoCAD SHX Text
PRT
AutoCAD SHX Text
VDU
AutoCAD SHX Text
AC-1
AutoCAD SHX Text
ANN
AutoCAD SHX Text
(E) ELEVATOR MOTOR DRIVESELEVATOR MOTOR DRIVES
AutoCAD SHX Text
ELEVATOR 1, 2, 3.
AutoCAD SHX Text
(N)ELEVATOR POWER DISCONNECT SWITCHES
AutoCAD SHX Text
(N)PNL EM/4, 2#12, GND, 3/4"C
AutoCAD SHX Text
(N)PNL EM/6, 2#12, GND, 3/4"C
AutoCAD SHX Text E
AutoCAD SHX Text
BJ
AutoCAD SHX Text
AutoCAD SHX Text E
AutoCAD SHX Text E
AutoCAD SHX Text E
AutoCAD SHX Text E
AutoCAD SHX Text
(E) ELEVATOR DRIVE ELEVATOR DRIVE H-O-A CONTROLS
AutoCAD SHX Text
(E)P1/46 2-#12, GND, 3/4"C
AutoCAD SHX Text N
AutoCAD SHX Text
NX
AutoCAD SHX Text N
AutoCAD SHX Text N
AutoCAD SHX Text N
AutoCAD SHX Text N
AutoCAD SHX Text N
AutoCAD SHX Text N
AutoCAD SHX Text N/A
AutoCAD SHX Text
AutoCAD SHX Text
(N) PANEL EM PANEL EM
AutoCAD SHX Text
(E) SECURITY SECURITY ALARM PANEL
AutoCAD SHX Text
CELL
AutoCAD SHX Text
FIRE COMMAND
AutoCAD SHX Text
INT.
AutoCAD SHX Text
IT CENTER
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
JANITOR
AutoCAD SHX Text
MECHANICAL
AutoCAD SHX Text
MAINTENANCE
AutoCAD SHX Text
MACHINE ROOM
AutoCAD SHX Text
ELEVATOR
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CENTER
AutoCAD SHX Text
AutoCAD SHX Text
EM POWER PANEL
AutoCAD SHX Text
(N) POWER CONDITIONER
AutoCAD SHX Text
(N) PANEL EMPANEL EM
AutoCAD SHX Text
(N)FACP (N)EM/7, (2)#12,CU GND, 3/4"C 30A UN-FUSED DISCONNECT
AutoCAD SHX Text
(E) PANEL EM1 PANEL EM1 208Y/120V 125A 3P/4W
AutoCAD SHX Text
(E) PANEL P-2 PANEL P-2 208Y/120V 125A 3P/4W
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text A.7
AutoCAD SHX Text
(E) PANEL P1-1PANEL P1-1
AutoCAD SHX Text
(E) PANEL P1-2PANEL P1-2
AutoCAD SHX Text
(E) PANEL L1PANEL L1
AutoCAD SHX Text
(N)CU-1
AutoCAD SHX Text N
AutoCAD SHX Text
(N) PNL EM PNL EM DISC SW
AutoCAD SHX Text
SECURE
AutoCAD SHX Text
PARKING
AutoCAD SHX Text
SALLYPORT
AutoCAD SHX Text
VAN
AutoCAD SHX Text
JUDGE'S
AutoCAD SHX Text
ENTRY
AutoCAD SHX Text
SECURE
AutoCAD SHX Text
SALLYPORT
AutoCAD SHX Text
SECURE
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
CELL
AutoCAD SHX Text
CELL
AutoCAD SHX Text
CELL
AutoCAD SHX Text
FIRE COMMAND
AutoCAD SHX Text
INT.
AutoCAD SHX Text
ENTRY
Auto…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .