Drawing Compression.pdf
PDF 103 KB Posted
- Attached to
- Nickel Aluminum Bronze (NAB) Machining Services
- Solicitation number
- N0016720Q0216
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Charpy Build Schematic.PNG | PNG image | |
| NSWCCD Block Dimensions_AM Machining Blocks_Sept 2020.pdf | ||
| Vendor Questions and Answers REV 1.docx | DOCX document | |
| Vendor Questions and Answers.docx | DOCX document | |
| CDRL A001 GFM Tracking Log_NAB Machining.xlsx | XLSX spreadsheet | |
| N0016720Q0216 NAB Machining Solicitation.pdf | ||
| CDRL A002 Government Property DID.pdf | ||
| Drawing Flat Bar Fatigue.PDF | ||
| Drawing Tensile 252.pdf | ||
| CDRL A001 NAB Machining.pdf | ||
| Drawing Fatigue Crack Growth Rate.pdf | ||
| Drawing Charpy V-Notch (CVN).pdf | ||
| Drawing Static Fracture Toughness.pdf | ||
| Drawing Tensile 505.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
6.38±.12
Ø.8±.01
90°±.05°
(All Dimensions in inches)
Centerless grinding has been used in the past to obtain tolerance and surface finish on diamter
Notes:
1. The end faces shall be flat and parallel within .0001- inches. Surface finish 16Ra or better
2. End faces shall be perpendicular to lateral surfaces within ± 0.05°
3. Surface finish on outter diameter shall be 4Ra or better
4. No turning or ID stamps allowed in the finished cylinders
5. Maintain Material ID of each cylinder using a labeled bag
DRAWN
CHECKED
APPROVED
SCALE WEIGHT SHEET
DWG NO REVCODESIZE
1/11:1 12/13/2019Eric Dau
A
ASTM Drawings
ASTM E9 Large Cylinder
| Sheets and Views |
| Sheet1 |
File details come from the government source that posted it. Updated .