DRAFT SOW Lakehurst and West Point.pdf

FEDERAL BUREAU OF INVESTIGATION

FINANCE AND FACILITIES DIVISION | PROCUREMENT SECTION

STATEMENT OF WORK

Lakehurst and Westpoint Operations and Maintenance Services

For the

Finance and Facilities Division

DRAFT Statement of Work

3/26/2025

STATEMENT OF WORK

1 Scope This is a contract to provide Operation and Maintenance Services to the Federal Bureau of Investigation (FBI) Real Property Management Section (RPMS) Finance and Facilities Division (FFD). This is a non-personal services contract. The Government shall not exercise any supervision or control over contractor employees performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction

The Finance and Facilities Division Division(s) of The Federal Bureau of Investigation require(s) the following products/services:

Preventive Maintenance Services for facilities and equipment located at Joint Base McGuire Dix Lakehurst and The United States Military Academy at West Point Firearms Range Complex #9.

The services at Lakehurst Hangar Facility #8 includes providing equipment inspections, testing, preventative maintenance, grounds maintenance, semi-annual roof inspections, and responding to emergency service calls both during and after duty hours.

The services at Fort Dix Firearms Range #17 includes generator inspections and servicing as well as responding to emergency service calls both during and after duty hours.

Fort Dix Firearms Range #13 will be as required.

The services at the West Point admin building and range tower includes preventative maintenance for the building and equipment. This also includes providing janitorial services to maintain and clean the administration building and tower facilities. This also includes responding to emergency service calls both during and after duty hours.

The contractor shall furnish all management, labor, tools, material, equipment, and insurance necessary to perform these services

1.2 Background

The FBI’s mission is to protect and defend the United States against terrorist and foreign intelligence threats, to uphold and enforce the criminal laws of the United States, and to provide leadership and criminal justice services to federal, state, municipal, and international agencies and partners; and to perform these responsibilities in a manner that is responsive to the needs of the public and is faithful to the Constitution of the United States.

The Real Programs Office manages the FBI Owned Facilities at Joint Base McGuire Dix Lakehurst and the United States Military Academy at West Point. Hangar 8 at Lakehurst, Firearms Ranges 17 and 13 on Fort Dix and the West Point Admin Bldg. and Firearms Range are used by the New York, New Jersey, and Philadelphia Divisions to conduct training and mission related functions.

The facilities located on Joint Base McGuire Dix Lakehurst and West Point require preventive maintenance in order to maintain operational readiness for the three FBI divisions.

2 Applicable Documents None

STATEMENT OF WORK GUIDE AND TEMPLATE

3 General Requirements Provide Preventive Maintenance and Services for the JBMDL Hangar 8, Fort Dix Firearms Range 17 and 13 and the admin building and range tower at West Point Firearms Range Complex #9.

The general tasks that would be required by the contractor to execute are found below:

Verify that all equipment data is accurate and complete on the attached “asset list”.

Review manufacturers’ recommended operations and maintenance procedures of all installed equipment.

Perform an initial test and inspection of all equipment listed in the “asset list” to develop a “baseline” of operation.

Perform preventive maintenance as “recommended” by the manufacture and approved by the FBI to maintain optimal performance standards.

Identify any equipment repairs needed and provide a proposal for repairs to include parts and labor.

Remove and properly dispose of any and all waste generated during maintenance and repair of the equipment.

Any hazardous waste generated as a result of the servicing of equipment must not be discarded in government receptacles. The government will not store service generated hazardous materials. Contractor will be required to show proof of proper disposal.

Perform after hours and emergency services when equipment fails to operate properly.

The Contractor shall comply with all codes, regulations, and requirements of Federal, State, Local and representative authorities, and in accordance with established OEM service schedules for each component of equipment. The Government reserves the right to increase, modify or decrease service schedules as needed. Contractor is encouraged to make recommendations on cost control to ensure the level of effort is equal to proposed levels while not reducing quality

Safety and Security Safety Requirements: The Contractor shall comply with safety and health regulations established by the local, State and Federal occupational safety and health and environmental protection agencies. The Contractor shall comply with the FBI Safety and Health Requirements Manual, EM 385-1-1 (dated 30 September 2014), and Mold Remediation in Schools and Commercial Buildings, EPA Publication 402-K-01-001, (dated September 2008).

Accident Reporting: Any accident or other damage involving any person, vehicle, equipment and/or Government property shall be reported verbally to the COR or delegate the same day of the incident. Contractor personnel will be provided OSHA-300 forms for reporting incidents by the COR. The forms are for furnishing information that will include, but not limited to, the following:

Time and date of occurrence.

Place of occurrence.

List of persons directly involved, and any injuries sustained.

List of vehicles, equipment and/or property damage incurred.

Narrative description of the incident that includes a chronological order of the incident and circumstances.

Emergency Medical Services: No emergency services exist on either site. First Aid kits with limited supplies and equipment are located throughout the facilities. In the event of a medical emergency while on site, the Contractor staff shall call 9-1-1 and respond to the emergency as the first priority. Immediately afterward, the Contractor shall notify the FM and the COR of the emergency, and the actions taken. The Contractor may need to notify Security of the incident as well per Government guidance. The Contractor shall provide appropriate medical care for its employees per OSHA guidance.

Health and Safety: The Contractor shall have all safety consultations performed by a certified safety manager. The health and safety of Contractor personnel as well as that of the Government are very important areas of this program. The Safety person shall be authorized by the Contractor to implement immediate corrective action and enforce the standards as needed or as safety issues/violations arise. The Contractor safety representative shall oversee Contractor personnel and subcontractors only. The FBI safety representative will have the authority to oversee all personnel and the site.

Life Safety Logbook: The Contractor shall maintain a life safety logbook containing information and guidance on the management of systems and all service records.

Quality Control The Contractor shall be responsible for the Quality Control (QC) of its work. The Contractor shall maintain positive QC to ensure the best results for all work activities. All Contractor employee work activities are subject to review by the COR or designated individual for Government Quality Assurance (QA). Remedies for corrective actions by the contractor shall not incur additional cost to the Government. The Contractor may recommend adjustments to the quality control plan as needed, and as a minimum once per quarter to adjust inspection / evaluation / approval criteria for QC approvals.

Planned Outages The Contractor shall schedule any utility or equipment outage with the FM and the COR thirty (30) calendar days in advance of the outage. This includes any deviation from normal operating conditions. An EXCEPTION to this shall only be those changes/outages necessitated by emergency conditions that if left unattended would create a hazard to personnel, equipment, and/or the facility or as approved by the FM and the COR.

Spare Parts and Equipment The Contractor shall acquire, maintain, and/or have access to an inventory of spare parts, tools, calibration and diagnostics equipment. This includes licenses, as applicable, items that are contained in the OEM’s commercially available spare parts, and other high consumption rate items necessary to properly and efficiently maintain/repair/alter the equipment covered under this contract.

Meetings The Contractor shall meet with Government representatives and the COR as directed by the COR at no additional cost to the Government. Meetings may be held in any of the facilities covered by this SOW or via Microsoft Teams or Teleconference to review schedules, planning and performance.

Task 1 Lakehurst Hangar and Fort Dix Range 17

Contractor shall provide sufficient Maintenance Technicians who are responsible for performing preventive maintenance operations. The contractor shall perform initial tests and inspections on all systems to establish a “baseline” of operation and ensure all equipment operates properly at the Lakehurst Hangar #8 and the generator at firearms range #17. Firearms range #13 will be on an as required basis. This “baseline” will be the standard of comparison for future service and level of operation. Furthermore, provide after hours and emergency repair service to the systems to ensure building systems do not become inoperable and cause other components to fail thus placing the mission in jeopardy.

Task 2 Lakehurst Hangar and West Point

The contractor shall provide the manpower, equipment, and materials to conduct roofing preventative maintenance and repair operations for all roofing on FBI buildings and structures identified as being part of this statement of work. The Contractor shall perform annual inspections of all roofs to identify its condition and need for replacement or repair. The Contractor shall semi-annually, in the months of November and April, inspect and clean all roof gutters, drains, and downspouts. Cleaning shall include removal of all bird nests, cobwebs, beehives, wasp nests, vegetation, leaves, debris, and all other obstructions that constricts flow to and through roof gutters, drains, and downspouts. The Contractor shall replace all loose, displaced, broken, or missing strainers. The contractor shall re-secure and fasten all loose gutters and downspouts in conjunction with inspection and cleaning. The Contractor shall maintain a log and make it available to the COR upon request. These findings shall be coordinated with the FBI

CO/COR.

Task 3 Lakehurst Hangar and West Point Pest Control

The contractor shall provide response and completion of service orders to evaluate and correct pest problems that are a threat to mission, health, safety, and to prevent property damage classified as emergency or routine based on pest type. Includes venomous arthropods (e.g., spider, scorpions, bees, and wasps); non-venomous arthropods (e.g., cockroaches and ants); vertebrate pests (e.g., rats, mice, & snakes); and wood destroying insects and fungi. This includes, annual surveillance and control of termites and other wood destroying pests and animal control by trapping, netting, applying toxicants for removal of snakes, squirrels, skunks, bats, starlings, or other pests as requested.

Task 4 Lakehurst Hangar and West Point HVAC Services

The contractor shall furnish all labor, supervision, tools, materials, equipment, incidental engineering, transportation, and facility management necessary to operate, maintain, and repair the HVAC system and associated distribution systems, facilities, and equipment. This work also includes record keeping of operations and conditions, analysis of records to correct non-optimal practices, monitoring warranties, testing operations and periodic operation and inspection of idle equipment, purchasing of supplies (other than fuel), and cleaning, preservation, lubrication, and adjustment of plant equipment. The Contractor shall create and maintain a complete set of written operating procedures. These procedures, including revisions, shall be provided to the Government, both soft and hardcopies.

The Contractor shall keep heat transfer surfaces free of mineral scale or other deposits. If mineral scale or other deposits are found, the Contractor shall chemically and/or mechanically clean the equipment as needed at the Contractor’s own expense.

The Contractor shall ensure the prevention of corrosion to piping and associated equipment and components. The HVAC systems shall be operated and maintained per manufacturer specifications and warranty requirements to ensure seasonal temperature range (70-75 degrees Fahrenheit), and air quality are provided in all areas, as indicated below:

All HVAC systems serving normally occupied areas shall be maintained and operated in accordance with the latest edition of ANSI/ASHRAE Standards. All HVAC systems shall provide ventilation in accordance with the latest edition of ASHRAE Standards.

Task 5 Lakehurst Hangar and Fort Dix Range 17 Generator

The contractor shall perform an inspection, maintain, and repair the gasoline, diesel, and natural gas generators and the combustible engines for generators identified in the Appendix in accordance with manufacturer recommendations, industry standards, and also any requirements mandated by the installation i.e. air permits or any other regulatory guidelines from the installation Environmental Office The contractor shall also perform load testing and operation of the transfer switch operation as required by the equipment manufacturer.

The Contractor shall perform (1) annual service visit per year. Generator maintenance visits will be performed during normal business hours (Monday through Friday). The contractor must contact the FBI to schedule appointments, the FBI is responsible for scheduling appointments and must be present during visits. Equipment or parts in need of replacement or repairs will be brought to the FBI’s attention for the appropriate actions.

During the annual service visit the contractor will perform at the minimum the following services:

Change engine oil Change engine oil filter Check valves (adjust if needed) Inspect air filter (replace if needed) Inspect spark plugs (replace if needed) Inspect fuel system Inspect exhaust system Inspect enclosure and ensure all openings are unobstructed Check battery (terminations, connections, and water level) Check all connections (electrical and mechanical) Check operation of battery charging equipment Simulate temporary loss of power from utility company and observe proper operation (generator start, power transfer and shutdown).

Conduct load bank testing to simulate an actual load to ensure the generator is operating at its highest

Capacity, Check generator voltage and Hz (adjust if needed) Identify any equipment repairs needed and provide a proposal for repairs and to include parts and labor.

Task 6 Fort Dix Range 13 (As required)

The contractor shall when required be prepared to provide emergency repair quotes and cost estimates for equipment at range 13 as identified by the contracting officer representative.

Task 7 West Point Cleaning Services

The contractor shall perform the following at West Point: Sweeping and Mopping, Vacuuming, Dusting, Restroom Cleaning, Garbage Removal. This includes the following:

Sweep and damp and/or wet mop all floor areas.

Chairs, trash receptacles, and easily movable items shall be moved to maintain floors underneath these items.

All moved items shall be returned to their proper position when all operations have been completed.

After being mopped, the floor shall have a uniform appearance with no streaks, swirl marks, detergent residue, or any evidence of soil, stains, film debris, or standing water. There shall be no splash marks or mop streaks on furniture, walls, baseboards, etc., or mop strands remaining in the area.

Vacuum all carpeted areas regardless of occupancy. All carpeted areas shall be vacuumed and free of all visible lint, litter, soil, and imbedded grit. Vacuum/clean interior and exterior walk-off mats

Dust all furniture, picture frames, windowsills, window tracks, AC/Heating vents, window blinds, televisions, computers (CPU and Monitor), doorframes, hallways, stairways, and entrance foyers.

All horizontal surfaces, such as windowsills, window tracks, window blinds, handrails, wood strips, door frames, exposed piping, light fixtures, covers and diffusers, ceiling, and walls within eight feet from the top of the finished floor shall be free of lint, dust, dirt, cobwebs, marks, fingerprints, smudges, and other accumulated soils.

Items on furniture tops are to be dusted and replaced.

Upholstered furniture shall be free of dust, dirt, lint, other stains, and discoloration and shall be kept free of all visible lint, liter, soil, and imbedded grit.

Deep clean and disinfect all surfaces of the wash bowl, toilet bowl and seat, shower, dispensers, plumbing fixtures, doors, walls, partition dividers, polished exposed piping, mirrors, and other such surfaces, using germicidal detergent.

After cleaning, receptacles shall be left free of deposits, dirt, smudges and streaks, soap film, dust, soils, scum, and odors.

All bright metal finishes such as faucets, pipes, fittings, and hardware shall be kept in a bright and clean condition.

After sweeping and mopping the floor, the entire surface shall be free from litter, dust, and foreign debris, including grout. Grout on wall and floor tiles shall be free of dirt, scum, mildew, residue, etc.

Floors shall have a uniform appearance without streaks, swirls, marks, detergent residue, or any evidence of soil, stain, film, or standing water. Easily moveable items shall be tilted or moved aside to sweep and damp mop underneath.

The Contractor shall ensure that the bathrooms are properly stocked with toilet paper, paper towels, and hand soap. Remove the trash from all areas of the building. All trash receptacles shall be emptied and returned to their initial location with Government provided plastic liners. All debris or liquids remaining in a trash receptacle due to a leaky plastic trash bag shall be removed. Trash shall be disposed of in a secured plastic bag.

The contractor shall pick up any trash that may fall onto the facility or grounds during the removal of such trash collection. All refuse collected shall be disposed of in the appropriate trash dumpster and/or recycle dumpster. Dirty trash receptacles shall be washed inside and out and shall be odor free.

General Supplies

Contractor will supply all equipment (such as vacuum cleaners, janitorial supplies, brooms, rakes, mops, tools, etc.) in good and proper working condition, cleaning supplies, fluids, lubricants, chemicals, and all labor necessary to perform the tasks as specified in this statement of work.

The Contractor shall ensure that the bathrooms are properly stocked with contractor supplied toilet paper, paper towels, and hand soap.

Custodial Services to be Provided Service Frequency

Bathroom Cleaning/Resupply 4 x per week Trash Removal 2 x per week Clean Drinking Fountains 4 x per week Sweeping/Vacuuming 2 x per week Spot Clean (includes glass doors, mirrors, walls, etc.) 2 x per month Clean Entry Ways 4 x per week Wet Mop Floors 2 x per month Dusting 1 x per month Strip/Finish Floors 1 x per year Clean/Shampoo Carpet 1 x per year Kitchen Areas 4 x per week

4 Key Personnel The contractor shall maintain and provide upon request a current listing of employees. The list shall include employee’s name, social security number, and level of security clearance. Failure to maintain a trained and certified workforce with the technical proficiency to perform required work in this work statement shall constitute grounds for any remaining contract options not to be exercised or for termination of this contract. Contractor shall provide licensed/certified skilled personnel capable of performing the type of work requested on the equipment to be in compliance with the base, local, state and federal regulations. All equipment shall be maintained in accordance with manufacturer certified/factory recommended service providers. This will ensure that any work performed is in accordance with manufacturer’s specifications and will not void any warranty

Identification of Contract Personnel Security requirements will require that all contract personnel, to include employees and subcontractors, wear identification badges when at the Government facility on contract start or employment start date. The ID badge shall be made of nonmetallic material, easily readable, and include employee’s name, contractor’s company name, functional area of assignment, and color photograph. contract personnel shall wear their company ID badge; a Government-provided ID badge; or both, as directed by regulations and procedures in effect at any specific Government facility, at all times when performing work under this contract, to include attending Government meetings and conferences. Each employee shall wear the ID badge in a conspicuous place on the front of exterior clothing and above the waist except when local regulations, safety, or health reasons prohibit such placement.

When attending meetings and working in facilities where their status is not obvious to third parties, contract employees are required to identify themselves as such to avoid creating an impression that they are government officials. These procedures will be in addition to other security requirements as set forth in this contract.

The Contractor is responsible for following all federal Occupational Safety and Health Administration (OSHA), state and local regulations, and FBI policies as they pertain to safety and health. The Contractor shall provide any information on their safety programs as requested by the CO or COR. The Contractor is responsible for providing and training any Personal Protective Equipment, monitoring devices, or other specialty equipment to perform their job in a safe manner while on FBI property. The Contractor is open for inspection, at any time, by the FBI Safety Staff while on site.

The Contractor is responsible for following all federal, state, and local regulations as they pertain to the Environment. All applicable Environmental Protection regulations and procedures shall be followed. Any information pertaining to environmental compliance can be requested by the CO or COR. The Contractor shall attempt to reduce any environmental impact due to the procedures and chemicals used while working on FBI property and determine the need for and provide any personal protective items required for the safe performance of work.

Note: Any hazard waste generated by contractor performing these services must properly disposed of by the contractor. No hazard waste will be stored or disposed of on site without prior approval by the Contracting Officer Representative (COR)

5 Place of Performance The primary place of performance will be at the Joint Base McGuire Dix Lakehurst Hangar #8, Fort Dix Range # 17 & 13 and the West Point Firearms Range Complex #9.

6 Deliverables The Contractor shall provide monthly status reports to the Contracting Officer (CO) and the Contracting Office Representative (COR). The format will be agreed to by the Contractor and COR at the start of performance, but the contents shall contain the following, at a minimum: Staffing Summary, Hours and Labor performed, Current Management and Administrative problems, and Action items. The Contractor shall also provide a bi-weekly status report that describes the activities that were completed (highlights), areas of risk, and personnel and their responsibilities for that time period.

The Contractor shall be responsible for providing the following deliverables:

Deliverable Title Deliverable Date

Kick Off Meeting Agenda and Presentation Materials No more than 10 calendar days after award Inspection and Test Report Within 2 weeks of work completion Detailed written report of service delivered Per occurrence Proposed schedule of dates for performing services As required Safety Plan Within 30 days of contract award Environmental Submittal Plan Within 30 days of contract award Draft Invoices Submitted within 5 days of completed services Final Invoice Submittal After COR approval

7 Electronic Invoicing Requirements The Federal Bureau of Investigation (FBI) requires vendors to submit invoices and supporting documentation electronically through the Invoice Processing Platform (IPP). IPP is a secure, web-based electronic invoicing system provided by the U.S. Department of the Treasury’s Bureau of the Fiscal Service (Treasury) in partnership with the Federal Reserve Bank of St. Louis (FRSTL). IPP is available at no cost to any commercial vendor or independent contractor doing business with a participating government agency. To learn more about IPP, please visit IPP.gov.

Invoice Submission

Vendors are required to create and submit electronic invoices using the IPP system. Invoices submitted by email will not be accepted. This requirement applies immediately upon contract award. For contract-specific questions, please contact the designated contracting officer for your contract.

Obtaining IPP Access

If your company has already enrolled in IPP:

You will not be required to re-register. Please contact your company's IPP account administrator so that he/she may add you as an additional user to your company’s IPP Collector account.

If your company has NOT enrolled in IPP:

Your company will be auto enrolled for IPP using information from your SAM.gov account. Your company's Primary Electronic Business Point of Contact (POC) will be designated as an IPP administrator.

This POC will be contacted by email to register when the FBI initiates the enrollment process through IPP.

To prevent enrollment delays, please ensure your designated Electronic Business POC in SAM.gov is up to date.

Your company’s IPP administrator will be responsible for initial account registration as well as creating and managing your company’s IPP users and permissions. Please note that due to U.S. Department of the Treasury guidelines, IPP cannot set up User IDs using a shared email address.

How to register for IPP:

1. Once FBI initiates the enrollment process, your company’s designated Electronic Business POC in SAM.gov will receive two emails from IPP Customer Support (ipp.noreply@mail.eroc.twai.gov):

The first email contains the initial administrative IPP User ID

The second email, sent within 24 hours of receipt of the first email, contains a temporary password

You must log in with the temporary password within 30 days

2. Registration is complete when the initial administrative user logs into the IPP web site with the User ID and password provided and accepts the IPP rules of behavior. Additional user accounts, including administrators, can be created after initial login.

Training

Vendor training materials, including a first-time login tutorial, are available on the IPP.gov website. Once you have logged in to the IPP application, you will have access to user guides that provide step-by-step instructions for all IPP capabilities ranging from creating and submitting an invoice to setting up email notifications.

Additional Support

IPP Customer Support Team is available Monday through Friday from 8:00 am to 6:00 pm EST

•Phone: (866) 973-3131 or Email: IPPCustomerSupport@fiscal.treasury.gov

•For answers to frequently asked questions, visit the Vendor FAQ page on the IPP.gov web site.

8 Government Furnished Equipment or Information N/A

9 Personnel Availability Onsite work hours/days shall be Monday through Friday, 7:00 am – 4:00 pm, excluding weekends and Federal Holidays. Flexibility within the normal workday shall be coordinated with the COR

10 Security Requirements The Limited Access Request (LAR) (formerly the Limited Background Investigation (LBI)) process is designed to ensure personnel without clearances requiring escorted access to FBI space are properly vetted through the FBI. Personnel that undergo a LAR may be permitted to work maintenance issues, construction projects, teach unclassified seminars or provide other services to the FBI on a limited basis. To be clear, persons provided an LAR have no greater privileges than anyone else being escorted into FBI space - they are not authorized to view or be exposed to Classified or Sensitive But Unclassified information, nor have system access, nor be left unescorted at any time. The value of the LAR is to ensure we are not allowing known criminals, those with open warrants, etc. access to FBI space.

The LAR is a requirement for anyone who does not have a clearance and is not entering the FBI as a family member. The limited exception is for persons attending unclassified meetings in sanitized spaces under escort. If meetings become more frequent than once or twice per year, the LAR may become a requirement.

Persons with active clearances are not eligible for the LAR and must pass their clearances via official channels for any type of FBI space access.

The LAR is a requirement for anyone who does not have a clearance and is not entering the FBI as a family member. The limited exception is for persons attending unclassified meetings in sanitized spaces under escort. If meetings become more frequent than once or twice per year, the LAR may become a requirement.

Persons with active clearances are not eligible for the LAR and must pass their clearances via official channels for any type of FBI space access.

The Process Upon award of the contract/work order, all personnel involved in the process must have a completed LAR consisting of checks from the Data Integration and Visualization System (DIVS), National Crime Information Center (NCIC)/Interstate Identification Index (III), Sentinel, and the Treasury Enforcement Communication System (TECS). The following forms must be accurately completed and furnished to the OSO at least 45 workdays prior to the arrival of contract individual to FBI space (or as early as possible).

• SF-85 - Questionnaire for Non-Sensitive Positions (fill-in gray areas only)

• Completion Guide

• Spanish Completion Packet

• Authorization for Release of Information (page 6 of SF-85)

• FD-285 - Fingerprint Application Card

• FD-857a - Sensitive Information Non-Disclosure Agreement

Failure to allot enough time to conduct the checks can result in access delays that cannot be waived.

11 Government Representatives

The functions inherent to this contract shall be performed by the designated Contracting Officer. The duly assigned COR shall ensure all actions pertaining to this contract are requested via the Contracting Officer.

11.1 Contracting Officer Representative

The COR will be identified via letter of COR delegation authority for this contract. The COR is responsible, as applicable, for: receiving all deliverables, inspecting and accepting the supplies or services provided hereunder in accordance with the terms and conditions of this contract; providing direction to the Contractor which clarifies the contract effort, fills in details or otherwise serves to accomplish the contractual Scope of Work; evaluating performance; and certifying all invoices/vouchers for acceptance of the supplies or services furnished for payment.

The COR does not have the authority to alter or modify the Contractor's obligations, contract terms, conditions, specifications, or cost. If as a result of technical discussions, it is in the Government’s best interest to alter/change contractual obligations or the Scope of Work, the CO shall issue such changes. The COR for this contract is Eric Hill. Contact information will be provided to the awardee.

11.2 Contracting Officer

This contract will be administered by:

Maureen Murdock

Contact information will be provided to the awardee

12 Travel and Other Direct Costs No travel will be required nor will be reimbursed by the Government.

Other Direct Costs (ODC) are not authorized.