Attachment 4(C) - CSO Body Armor Requirements.pdf

DJM-13-A32-R-0003

CSO SOFT BODY ARMOR REQUIREMENTS

Attachment 4(C)

SECTION J, ATTACHMENT 4(C)

POLICIES, DIRECTIVES, and STANDARDS

1.0 SOFT BODY ARMOR KIT

Male or Female Front and Rear Concealable Ballistic Panels Two Concealable Armor Carriers One Trauma/Ballistic Insert Applicable documentation and accessories are required, i.e.

- Warranty

- Assembly and wear instructions

- Straps or accessories required for wear and assembly

2.0 MANDATORY TECHNICAL REQUIREMENTS FOR SOFT BODY ARMOR

2.1 Male Concealable Ballistic Panels

NIJ Standard-0101.06 certified or most current NIJ certification based on evolving requirements and procedures

Type IIIA Ballistic Panels Drug Enforcement Administration Armor Testing Protocol ballistic certified Weight less than 1.27 lbs/ft2 Thinness less than .30 inches .357 Sig BFS average of 28 mm or less

2.2 Female Concealable Ballistic Panels

Shall be fully structured (pinned) to specifically fit a female torso to include frontal cups NIJ Standard-0101.06 certified or most current NIJ certification based on evolving requirements and procedures Type IIIA Ballistic Panels Shall be from the same product line and material as the Male Concealable Ballistic Panels Weight less than 1.34 lbs/ft2 Thinness less than .32 inches .357 Sig BFS average of 28 mm or less

2.3 Concealable Armor Carrier

Trauma/Ballistic plate pocket-front Single, wide, securing waistband Carrier material-white in color

2.4 Trauma/Ballistic Insert for Concealable Carrier

DJM-13-A32-R-0003

Attachment 4(C)

Non-metallic Semi-rigid Provides added trauma reduction Ultra-light