JLG Architects | Jessi Larson, NCIDQ, LEED AP 215 Broadway N., 7th Floor | Fargo, ND 58102 | p.701.365.8629| jlarson@jlgarchitects.com

Tag: Digital Model Release Form

Project Name:

NDSU Field Soils Lab Building #168

Project No.: 23197

Contact Name:

Date:

Company: Telephone:

Address: Email:

Intended Use of Digital File: Digital File Format

Furniture procurement

AutoCAD

Project Milestone

NOTE: Please verify that this form is filled out completely and carefully.

Digital Documents will not contain a border or title block and are without seals and/or signatures.

Third Party User Agreement for Electronic Data: This Agreement is for the use of electronic data/digital documents between JLG Architects (Architect) and a Third-Party User (User). Architect retains ownership of all information prepared by the Architect.

Note:

1. Architect grants permission to use this electronic data/digital documents with the understanding that JLG

Architects assumes no liabilities, either expressed or implied, for accuracy or completeness. The transferred documents may not include all modifications or field changes made since their initial release.

2. This data may only be used to work on the specific project identified on this form. No permission is granted for its use on other projects, additions to this project, or for completion of this project by another design professional.

Use of modified files without Architect's written approval is at User’s risk and legal responsibility.

3. Documents may be incomplete and are provided only as a convenience for the User. The Architect makes no representation of the documents’ completeness or accuracy. The User takes full responsibility for the accuracy and correctness of all measurements.

4. Architect grants permission to use this electronic data/digital documents only to the person/firm noted on this firm; this information may not be transferred to any other users or individuals.

DIGITAL FILE REQUEST FORM:

5. While all digital data may appear to be very accurate, the electronic files being transferred have been developed for JLG internal use. They may contain provisional information, unintentional or deliberate inaccuracies, or information partially or wholly obsolete.

6. JLG's expression of project intent is contained in the paper documentation it produces and issues. The user of

JLG's electronic data is to assume, unless specifically directed in writing otherwise, that graphics, notations, dimensions, and specifications provided in paper documentation issued by JLG supersedes any and all electronic data. By using JLG's electronic data, the user becomes responsible for reviewing all current and subsequent project documentation to identify inconsistencies and revisions and to make all necessary corrections and revisions.

7. Translation of electronic data from one computer system to another can and often will result in the loss of key data. JLG cannot guarantee the data provided will work on any system but will make every effort practical to assist users in making use of the data.

8. In using JLG's electronic data, the users shall assume responsibility for the correctness of all measurements, dimensions, inventories, areas, etc. extracted from these files.

9. The use of the BIM files for any other purpose other than for supplemental information for convenience in the bidding process is prohibited.

10. If included within the electronic data, the JLG title block (or our sub-consultant title blocks) may not be used, printed, or reproduced for any purpose, including purposes related to this project without JLG's written consent.

11. All families/blocks/components etc. contained within these files are property of JLG and may not be extracted for use in other projects.

12. All the aforementioned items apply in their entirety to any other party with whom users share JLG's electronic files. Users are responsible for conveying the information in this agreement to these other parties and for ensuring their proper use of this electronic data, in accordance with the provisions included herein.

By signing the release below you are acknowledging that 1) North Dakota State University (“Owner”) and the Design Team shall be held harmless from any and all claims, liabilities, damages, losses, or expenses arising out the contractor’s use of the BIM files and cannot be held responsible for any errors or omissions within the BIM files, 2) the BIM files are to be read in conjunction with all construction documents, addenda and supplemental contract documents, and 3) the BIM files are not to be used for fabrication or construction of any kind.

Signature: Date:

PROCUREMENT SUBSTITUTION REQUEST FORM

NDSU FIELD SOILS LAB BUILDING #168 - FURNITURE PACKAGE

FARGO, NORTH DAKOTA

JLG PROJECT NO. 23197

Item Code Manufacturer Product Name Brochure Link Product Image Warranty Weight Limit

(seating)

Estimated Lead Time

(Weeks) Comments

Required Substitution Information

21000 GFPS SECURITY CAMERAS

TYPICAL BID ENVELOPE(S)/SUBMISSION REQUIREMENTS

1. PROJECT NAME

2. NAME OF BIDDER

3. BIDDER'S CONTACT INFORMATION

"BID ENCLOSED"

BID ENVELOPE

CONTENTS:

- 2 SIGNED COPIES OF BID FORM

"SUPPORTING

DOCUMENTS,

OPEN FIRST"

SUPPORTING DOCUMENTS

ENVELOPE

A

FF

IX

CONTENTS:

- NORTH DAKOTA STATE CONTRACTOR'S LICENSE

- BID BOND (CASHIER CHECK UNACCEPTABLE)

jlarson Rectangle jlarson Rectangle jlarson Text Box

SEALED

jlarson Text Box

SEALED

jlarson Text Box

TYPICAL SUBSTITUTION REQUEST REQUIREMENTS

jlarson Rectangle jlarson Text Box

ACCEPTABLE

jlarson Text Box

NOT ACCEPTABLE

jlarson Image jlarson Image jlarson Green live link to website and warranty jlarson Green email attachments not acceptable. all information and images should be built into excel document.

jlarson Green image placed in document

BID COST BREAKDOWN

FARGO, NORTH DAKOTA

JLG PROJECT NO. 23197

Item Code Manufacturer Product Unit Price Qty. Extended Total Price Estimated Lead Time

(Weeks) Comments

C-4

C-5

C-6

D-1

D-2

D-3

D-4

D-5

D-6

D-7

D-8

D-9

F-1

LS-1

LS-2

P-1

S-1

S-2

SC-1

SC-2

SC-3

SC-4

T-1

T-2

T-3

T-4

T-5

T-6

T-7

T-8

T-9

General Notes: Bids and estimates shall be for the period starting at bid due date and ending approximately six months later and shall show net product prices.

The Owner (North Dakota State University) requires firm bids from all bidders.

The Owner reserves the right to reject any bid not stating a firm price as not responsive.

*JLG does not confirm quantities, bidders required to tabulate themselves

Required Bidding Information

Bid Package #1: Furniture Balance

BID COST BREAKDOWN

FARGO, NORTH DAKOTA

JLG PROJECT NO. 23197

T-10

T-11

T-12

Installation (lump sum)

C-1

C-1.1

C-2

C-3

Installation (lump sum)

Bid Package #2: Task Chairs

21000 GFPS SECURITY CAMERAS

TYPICAL BID ENVELOPE(S)/SUBMISSION REQUIREMENTS

1. PROJECT NAME

2. NAME OF BIDDER

3. BIDDER'S CONTACT INFORMATION

"BID ENCLOSED"

BID ENVELOPE

CONTENTS:

- 2 SIGNED COPIES OF BID FORM

"SUPPORTING

DOCUMENTS,

OPEN FIRST"

SUPPORTING DOCUMENTS

ENVELOPE

A

FF

IX

CONTENTS:

- NORTH DAKOTA STATE CONTRACTOR'S LICENSE

- BID BOND (CASHIER CHECK UNACCEPTABLE)

jlarson Rectangle jlarson Rectangle jlarson Text Box

SEALED

jlarson Text Box

SEALED

jlarson Text Box

TYPICAL BID COST BREAKDOWN REQUIREMENTS

jlarson Rectangle jlarson Text Box

ACCEPTABLE - COMPLETE BID PACKS

jlarson Image jlarson Image jlarson Text Box

NOT ACCEPTABLE - PARTIAL BID PACKS

FARGO, ND

JLG PROJECT NO. 23197

DESK ACCESSORIES 12 4113 - 1

SECTION 124113– DESK ACCESSORIES

Item Code: CM-1

Description: Cord Management

Manufacturer: Fellowes or approved equal

Manufacturer’s Designation: Netta Wire Management 24”, NETTA-24-BLAK

Construction: Durable flame retardant mesh material. 24” wide. 3 mounting brackets and 5 velcro straps. Weight capacity is 10 lbs. Power strip portion of PM-1 to be secured in this mesh. To be mounted underneath desk or table as drawings and/or specifications note.

Finishes: Black.

Source: Nathan Suprenant, CFS Sales Representative Phone number: (612) 636-7472 Email Address: nsuprenant@cfsreps.com

PHOTOGRAPH:

(IMAGE MAY NOT BE AN EXACT REPRESENTATION OF PRODUCT SPECIFIED)

DESK ACCESSORIES 12 4113 - 2

Item Code: PM-1

Description: Power Module

Manufacturer: Fellowes or approved equal

Manufacturer’s Designation: Flex Charge Desktop Power FCH4CS-BLK

Construction: Two AC outlets. One quick-charge USB-A port. One quick-charge USB-C port. Power strip: six AC outlets. Universal mounting bracket. UL and cUL listed. 9’ power cord. 28.5” connection cord. 10 year warranty. Power strip portion of this to be secured in CM-1 or CM-2 as drawings/specification note.

Finishes: Standard Black.

Source: Nathan Suprenant, CFS Sales Representative Phone number: (612) 636-7472 Email Address: nsuprenant@cfsreps.com

METAL CASE GOODS 12 5116.13 - 1

SECTION 125116.13 – METAL CASE GOODS

METAL CASE GOODS SPECIFICATION

Item Code: F-1

Description: Mobile Pedestals

Manufacturer: Haworth or Approved Equal

Manufacturer’s Designation: X Series Mobile file/file

Dimensions: Depth: 18”; Width: 15“; Height: 27.5“ (Vendors to confirm height works with adjacent surfaces.)

Construction: Metal case and fronts. Includes steel pedestal with non-locking casters.

File drawers include one compressor in each drawer. Metal front. Applied pull (Classic). Drawers have full extension steel ball-bearing glides.

Drawer interiors and accessories are black. Single lock secures all drawers. Chrome lock plug.

Finishes: Steel: Metallic Silver; Pull: Metallic Silver; Lock Plug: Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691 Email Address: Courtney.Griggs@Haworth.com

PHOTOGRAPH

METAL CASE GOODS 12 5116.13 - 2

Item Code: SC-1, SC-2

Description: Storage Cabinet

Manufacturer’s Designation: SC-1: X Series 5 High Personal Storage Tower – right side valet SC-2: X Series 5 High Personal Storage Tower – left side valet

Approved alternates: Steelcase – Universal Storage Herman Miller – Tu Storage

Dimensions: Height: 63.5“ Depth: 24” Width: 24“

Construction: Metal case and fronts. Pedestal with two box drawers – top drawer includes a single pencil tray. Box drawers include one divider in each drawer. File drawer to include one compressor in each drawer. Drawers have full extension steel ball-bearing slides. Hinged doors feature full access hinges. Applied pull (Classic). Cabinet interior and shelves match case color. Two adjustable shelf in cabinet. Valet with coat rod. Lock is located next to pull on door. Chrome lock plug. Glides provide 1.5” adjustment range.

Finishes: Steel: Metallic Silver, Pull: Metallic Silver; Lock Plug: Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

METAL CASE GOODS 12 5116.13 - 3

Item Code: SC-3

Description: Storage Cabinet

Manufacturer’s Designation: X Series Cubby Locker – 4 Door, Left Handed

Approved alternates: Steelcase – Universal Storage Herman Miller – Tu Storage

Dimensions: Height: 39“ Depth: 18” Width: 36“

Construction: Metal case and fronts. Hinged doors feature full access hinges. Applied pull (Classic). Cabinet interior and shelves match case color. One adjustable shelf in cabinet. Lock is located next to pull on door. Chrome lock plug. Glides provide 1.5” adjustment range.

Finishes: Steel: Metallic Silver, Pull: Metallic Silver; Lock Plug: Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

PLASTIC-LAMINATE-CLAD CASE GOODS 12 51 16.19 - 1

SECTION 125116.19 – PLASTIC-LAMINATE-CLAD CASE GOODS

Item Code: P-1

Description: Podium

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Planes Cart Podium

Dimensions: Depth: 22.25” Width: 22.25” Height: 46”

Construction: HPL with 1mm edge band. Sloping top with paper ledge. Aluminum rails.

Podium user side has open shelf, lower storage with lockable touch latch door and one adjustable shelf. Bottom has 2.75” cutout for wire access to floor. Casters suitable for hard floor.

Finishes: Laminate: Grade B, to be selected from manufacturer’s full range.

Laminate edge: Matching Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

PLASTIC-LAMINATE-CLAD CASE GOODS 12 51 16.19 - 2

Item Code: SC-4

Description: Credenza

Manufacturer: OFS or Approved Equal

Manufacturer’s Designation: Intermix Buffet Door/Drawer Credenza

Dimensions: Height: 36” Depth: 20” Width: 17”

Construction: Two drawers, four doors (storage space with two adjustable shelves).

HPL top with matching square edge. Quartered veneer case. Applied metal Era pull. Unfinished back panel. Non-marring adjustable glides.

Non-locking

Finishes: HPL and veneer to be selected from manufacturer’s full range. Silver pull.

Source: Ben Wagner, True North Commercial Furniture Phone number: (612) 384-6063 Email Address: ben@truenorthcf.com

TABLES 12 5123 - 1

SECTION 125123 – TABLES

Item Code: T-1

Description: Occasional Table

Manufacturer: Leland or approved equal

Manufacturer’s Designation: Leah Ripple Table

Dimensions: Diameter: 30”, Height: 18”

Construction: ½” laminate top. Metal powder coat base. Black HDPE glides plate.

Finishes: COL Wilsonart Castle Oak 7928-38 Fine Velvet Texture. Base: Sterling

Source: Peggy Rasmussen, Primary Design Resource Phone Number: 612-845-8413 Email: prasmussen@pdresource.com

TABLES 12 5123 - 2

Item Code: T-2

Description: Occasional Table

Manufacturer: Leland or approved equal

Manufacturer’s Designation: Leah Ripple Table

Dimensions: Diameter: 18”, Height: 22”

Construction: ½” laminate top. Metal powder coat base. Black HDPE glides plate.

Finishes: COL Wilsonart Castle Oak 7928-38 Fine Velvet Texture. Base: Sterling

Source: Peggy Rasmussen, Primary Design Resource Phone Number: 612-845-8413 Email: prasmussen@pdresource.com

TABLES 12 5123 - 3

Item Code: T-3

Description: Multi Purpose Table

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Jive Table, seated height, X base, square

Pre-Approved Alternates: Steelcase – Universal Tables

Herman Miller – Everywhere Tables

Dimensions: Depth: 36”, Length: 36”, Height: 29”

Construction: Includes 1.18” thick standard laminate top with matching 3mm edge band edges. Extruded metal T-base. Base to include 0.625” adjustment glides. Glides suitable for hard floors.

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

TABLES 12 5123 - 4

Item Code: T-4

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Jive Table, seated height, extruded T base, rectangular

Pre-Approved Alternates: Steelcase – Universal Tables

Herman Miller – Everywhere Tables

Dimensions: Depth: 30”, Length: 42”, Height: 29”

Construction: Includes 1.18” thick standard laminate top with matching 3mm edge glides. Glides suitable for soft floors.

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

TABLES 12 5123 - 5

Item Code: T-5

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Jive Table, counter height, extruded T base, rectangular

Pre-Approved Alternates: Steelcase – Universal Tables

Herman Miller – Everywhere Tables

Dimensions: Depth: 30”, Length: 42”, Height: 36”

Construction: Includes 1.18” thick standard laminate top with matching 3mm edge

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

TABLES 12 5123 - 6

Item Code: T-6

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Jive Table, counter height, extruded T base, rectangular

Pre-Approved Alternates: Steelcase – Universal Tables

Herman Miller – Everywhere Tables

Dimensions: Depth: 36”, Length: 60”, Height: 36”

Construction: Includes 1.18” thick standard laminate top with matching 3mm edge glides. Glides suitable for hard floors.

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

TABLES 12 5123 - 7

Item Code: T-7

Description: Conference Table

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Jive Table, seated height, bridge base, rectangular, with custom cut out

Pre-Approved Alternates: Steelcase – Universal Tables

Herman Miller – Everywhere Tables

Dimensions: Depth: 36”, Length: 72”, Height: 29”

Construction: Includes 1.18” thick standard laminate top with matching 3mm edge band edges. Base to include 0.625” adjustment glides. Provide wire management sleeve that routes cords over to wall box. One custom cut out for power module below.

Power Module (by others): Creston FT2-202-MECH-PTL-B

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

TABLES 12 5123 - 8

Item Code: T-8

Description: Training Table

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Jive Training Table, Flip Top, Casters

Dimensions: Depth: 24” Length: 60” Height: 29”

Construction: Includes 1.18” thick standard laminate top with matching 3mm edge band edges. C-leg extruded base. Flip-top mechanism which allows table to nest. Casters suitable for soft floors.

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

TABLES 12 5123 - 9

Item Code: T-9

Description: Conference Table

Manufacturer: OFS or approved equal

Manufacturer’s Designation: Intermix Rectangular top (Special model # NSCC-1110346) Intermix Thick Panel Base (Standard model #CC-M10427TPBK)

Dimensions: Depth: 36” Length: 144” Height: 28.75”

Construction: Tops are 1.2” thick for high pressure laminate with matching veneer edge. Top to include power cut outs for integrated power and cable management ran through panel base. Matching TFL thick panel beam base. Base to have removeable access panel for wire access. Two custom cut outs for power modules below – one at each end.

Power Module (by others): (1) Crestron FT2-700-MECH-PTL-B

(1) Creston FT2-202-MECH-PTL-B

TABLES 12 5123 - 10

Finishes: Grade B standard HPL laminate top to be selected from manufacturer’s full range.

Source: Ben Wagner, True North Commercial Furniture Phone number: (612) 384-6063

(IMAGE MAY NOT BE AN EXACT REPRESENTATION OF PRODUCT SPECIFIED

TABLES 12 5123 - 11

Item Code: T-10

Manufacturer: OFS or approved equal

Manufacturer’s Designation: Kintra Desk Height Table

Dimensions: Depth: 36” Length: 84” Height: 29”

Construction: TFL. 2” top thickness. Mitered construction. 4” support beam underneath surface.

Finishes: Grade B standard TFL laminate top to be selected from manufacturer’s full range.

TABLES 12 5123 - 12

Item Code: T-11

Description: Outdoor Table

Manufacturer: Homecrest Outdoor Living or approved equal

Manufacturer’s Designation: Mode 44” Square Dining Height Table (no hole) #134444F

Dimensions: Depth: 44” Length: 44” Height: 30”

Construction: Powder coat aluminum. Wind, salt, snow resistant.

Finishes: Powder coat to be selected from manufacturer’s full range.

Source: Mark Bottenmiller, Homecrest VP of Sales Phone number: (303) 859-2063 Email Address: mbottemiller@homecrest.com

TABLES 12 5123 - 13

Item Code: T-12

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Jive Table, seated height, extruded T base, rectangular

Pre-Approved Alternates: Steelcase – Universal Tables

Herman Miller – Everywhere Tables

Dimensions: Depth: 30”, Length: 42”, Height: 29”

Construction: Includes 1.18” thick standard laminate top with matching 3mm edge

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

CHAIRS 12 5213 - 1

SECTION 125213 – CHAIRS

Item Code: C-4

Description: Side Chair

Manufacturer: OFS or approved equal

Manufacturer’s Designation: OFS Acen Nesting Chair with Arms

Dimensions: Height: 34.75” Seat Height: 18” Depth: 24” Seat Depth: 16.5” Width: 23.75” Seat Width: 19.5”

Construction: Mesh back, pivoting arms that fold up, pivoting back, built-in seat slider, upholstered seat with molded seat foam. Hard casters.

Rated up to 300 lbs.

Finishes: Ultrafabrics-Brisa Original. Mesh to be selected from manufacturer’s full range. Standard mesh back to be selected from manufacturer’s full range. Luster Gray base/frame.

CHAIRS 12 5213 - 2

Item Code: C-5

Description: Side Chair

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Very side chair, 4-leg base, armless, glides, polymer seat and perforated poly back

Dimensions: Depth: 22” Seat Depth: 17.5” Width: 22.3” Seat Width: 19.2” Height: 33.9” Seat Height: 18.2”

Construction: High-strength polymer back with flexing perforations. High-strength polymer seat. Painted frame. Non-marring glides suitable for hard floor.

4-leg metal base.

Finishes: Metallic Silver frame. Plastic shell to be selected from manufacturer’s full range.

Source: Courtney Griggs: Haworth Territory Sales Manager Phone number: (612) 212-5691

CHAIRS 12 5213 - 3

Item Code: S-1

Description: Lab Stool

Manufacturer: Biofit or approved equal

Manufacturer’s Designation: Bench-Height UniqueU Series stool UUA-M-RC-T-AFP-XA-C

Dimensions: Depth: 26” Seat Depth: 18.5” Width: 26” Seat Width: 17” Height: 36” Seat Height: 18”-25”

Construction: Pnuematic seat-height adjustment, backrest tilt, self-skinned urethane seat and back with integrated ventilation ribs, integral lumbar support, high-profile cast aluminum base with adjustable footring, dual-wheel non marring polyurethane casters that resist movement when chair is unoccupied, chrome metal parts, resistant to water, many chemicals, paint, and punctures

Finishes: Black urethane, chrome metal

Source: Jen Pettit, Office Products Marketing Phone number: (612) 508-1545 Email Address: Jen@opmreps.com

CHAIRS 12 5213 - 4

Item Code: S-2

Description: Stool

Manufacturer: Haworth or approved equal

Manufacturer’s Designation: Very Bar Counter Stool, 4-leg base, armless, glides, poly seat and perforated poly back

Dimensions: Depth: 23” Seat Depth: 17.2” Width: 23.75” Seat Width: 18.75” Height: 42.25” Seat Height: 25.75”

Construction: High-strength perforated polymer back with flexing perforations.

Injection-molded high-strength polymer seat. Painted frame. Non-marring glides suitable for hard floor. 4-leg metal base.

Finishes: Metallic Silver base. Plastic shell to be selected from manufacturer’s full

Source: Courtney Griggs: Haworth Territory Sales Manager Phone number: (612) 212-5691

CHAIRS 12 5213 - 5

Item Code: C-6

Description: Outdoor Chair

Manufacturer: Homecrest Outdoor Living or approved equal

Manufacturer’s Designation: Elevate Armless Dining Chair (stackable) #56350

Dimensions: Depth: 21” Width: 25” Height: 32.5” Seat Height: 18

Construction: Solid aluminum frame. Slingable mesh fabric. Frame and mesh wind, salt, sun, and snow resistant.

Finishes: Grade A Mesh and frame metal to be selected from manufacturer’s full

Source: Mark Bottenmiller, Homecrest VP of Sales Phone number: (303) 859-2063 Email Address: mbottemiller@homecrest.com

UPHOLSTERED SEATING 12 5219 - 1

SECTION 125219 – UPHOLSTERED SEATING

Item Code: LS-1

Description: Lounge Chair

Manufacturer: OFS or approved equal

Manufacturer’s Designation: Coact Lite Mid Back Wide Chair with Low Arms

Dimensions: Height: 34.75” Seat Height: 18” Depth: 26” Seat Depth: 19.5” Width: 32” Seat Width: 29.5”

Construction: Fully upholstered. Mid-back. Sinuous springs in seat. Push through clean out behind seat. Metal round post leg. Non-ganging.

Finishes: Upholstery: Ultrafabrics-Brisa Original, Base: Luster Gray

UPHOLSTERED SEATING 12 5219 - 2

Item Code: LS-2

Description: Rocking Chair

Manufacturer: OFS or approved equal

Manufacturer’s Designation: OFS High Back Rocker

Dimensions: Height: 40.5” Seat Height: 16.75” Depth: 29.5” Seat Depth: 20” Width: 30.75” Seat Width: 24.5”

Construction: Clean-thru design. Upholstered seat and back. Polished aluminum rocker base. Wall saver design. Motion arms. Poly arm caps.

Finishes: Upholstery: Ultrafabrics-Brisa Original; Base: Luster Gray; black arm caps

OFFICE SEATING 12 5223 - 1

SECTION 125223 – OFFICE SEATING

Item Code: C-1

Description: Task Chair

Manufacturer: Haworth or approved equal

Approved Alternate: Steelcase Amia

Manufacturer’s Designation: Zody II Task Chair with mesh back

Dimensions: Depth: 29” Seat Height: 16”-21” Width: 29” Seat Depth: 16.8”-19.5” Height: 38”-43”

Construction: Mesh back. Upholstered seat. Adjustable seat depth. Plastic five-star base. Lumbar. 4D adjustable arms with plastic upright (in and out, up and down). Soft arm caps. Synchronized 3-point tilt. Pneumatic height adjustment. Synchronized 3-point tilt. 5 position back stop. Casters suitable for hard floors.

Finishes: Mesh back to be chosen from manufacturer’s full range.

Black shell and base Ultrafabrics-Brisa Original upholstery.

Source: Courtney Griggs, Haworth Territory Sales Manager

OFFICE SEATING 12 5223 - 2

Item Code: C-1.1

Description: Task Chair

Manufacturer: Haworth or approved equal

Approved Alternate: Steelcase Amia

Manufacturer’s Designation: Zody II Task Chair with mesh back

Dimensions: Depth: 29” Seat Height: 16”-21” Width: 29” Seat Depth: 16.8”-19.5” Height: 38”-43”

Construction: Mesh back. Upholstered seat. Adjustable seat depth. Plastic five-star base. Lumbar. 4D adjustable arms with plastic upright (in and out, up and down). Soft arm caps. Synchronized 3-point tilt. Pneumatic height adjustment. Synchronized 3-point tilt. 5 position back stop. Casters suitable for soft floors.

Ultrafabrics-Brisa Original upholstery.

Source: Courtney Griggs, Haworth Territory Sales Manager

OFFICE SEATING 12 5223 - 3

Item Code: C-2

Description: Task Chair

Manufacturer: Haworth or approved equal

Approved Alternate: Steelcase Amia

Manufacturer’s Designation: Zody II Task Stool with mesh back

Dimensions: Depth: 29” Seat Height: 21”-28.3” Width: 29” Seat Depth: 16.8”-19.5” Height: 43”-50.3”

Construction: Mesh back. Upholstered seat. Adjustable seat depth. Plastic five-star base. Lumbar. 4D adjustable arms with plastic upright (in and out, up and down). Soft arm caps. Synchronized 3-point tilt. Pneumatic height adjustment. Foot ring. Synchronized 3-point tilt. 5 position back stop.

Casters suitable for hard floors.

Ultrafabrics-Brisa Original upholstery.

Source: Courtney Griggs, Haworth Territory Sales Manager

OFFICE SEATING 12 5223 - 4

Item Code: C-3

Description: Task Chair

Manufacturer: Haworth or approved equal

Approved Alternate: Steelcase Amia

Manufacturer’s Designation: Zody II Task Chair with upholstered back

Dimensions: Depth: 29” Seat Height: 16”-21” Width: 29” Seat Depth: 18.8”-19.5” Height:38”-43”

Construction: Upholstered back and seat. Fixed seat depth. Plastic five-star base.

Height adjustable arms with plastic upright Soft arm caps. Synchronized 3-point tilt. Pneumatic height adjustment. Casters suitable for soft floors.

Finishes: Ultrafabrics-Brisa Original upholstery. Black base and frame.

Source: Courtney Griggs, Haworth Territory Sales Manager

PANEL-HUNG COMPONENT SYSTEM FURNITURE 12 5913 - 1

SECTION 125913 – PANEL-HUNG COMPONENT SYSTEM FURNITURE

Item Code: WS-1

Description: Workstation Panel System & Components

Manufacturer: Haworth or approved equal

Pre-Approved Alternates: Steelcase – Answer panels, Universal surfaces & storage

Herman Miller – Canvas panels and worksurfaces, Tu Filing

Manufacturer’s Designation: Panels: Compose Worksurfaces: Adaptables Storage: X-Series

Dimensions: Frames/Tiles: See Drawings Worksurfaces: See Drawings Box/Box/File: Height: 27.5”; Depth: 23”; Width: 15”

Components: Worksurfaces: Laminate with 3mm matching edgeband. Wireways as shown on drawings. All worksurfaces to have same direction wood graining. Provide required supports as needed.

Box/Box/Files & File/Files: Metal case and fronts. Files with pencil drawers and or box drawers includes a single pencil tray. Box drawers include one divider in each drawer. File drawers include one compressor in each drawer. Drawers have full extension steel ball-bearing glides.

Applied pull (Classic). Drawer interiors and accessories are black finish.

Glides provide 1.5” adjustment range.

Panel Assemblies: Panel Assemblies are available with or without raceway covers, an open base option and three top trim options consisting of roll formed steel, extruded aluminum, or wood veneer. Attachment hardware consisting of an alignment pin and 1⁄4- 20 carriage bolts with fender washers and nuts to connect frames in an in-line condition are included with each panel.

Panels can be configured with in-line, end-of-run and two-, three- and four-way 90° conditions and two- and three-way 120° conditions using separately specified corner block connectors and trim covers. All panel types accept separately specified glass or stack (tile) frames that can be added to create an overall panel height of 90” (2286mm). All glass panels and panel frames (with tiles) have an overall thickness of 3” (76.2mm). Panel assemblies include a 21-gauge (.033", 0.84mm) roll formed steel pan/trough with a powder-coat finish attached to the bottom.

The trough is .44” (11.2mm) high and is used with raceway covers to capture and enclose the power and data cabling in the base. The base raceway cover ships as two pieces made from 21 gauge (0.033”, 0.84mm) roll formed steel with a powder coat finish and fits onto the bottom pan/trough and friction fit fasteners attached to the bottom frame of the panel. A cold headed steel leveling glide with a molded plastic foot is positioned at each end of the panel. The glide provides 2.5” (63.5mm) of leveling adjustment and comes with one removable carpet gripper per frame. All panels specified with power include a pre-wired electrical

PANEL-HUNG COMPONENT SYSTEM FURNITURE 12 5913 - 2

distribution system and an in-line flexible power connector. Powered panels feature an electrical distribution system that has eight-wires and can be specified with one-circuit, 3-circuit and two, 4-circuit wiring configurations. Each circuit is rated for 20-amps at 125 volts. Power can be specified as factory installed in the base, below worksurface, or beltline position or field retrofitted at the standing height position.

Raceway covers can be specified independently for each side of the panel, and will have up to, two electrical or data openings available per side. Panels are easily converted in the field from powered to non-powered by removing the electrical distribution system or vice versa.

Panel frames can be specified with no raceway cover on one or both sides of the frame and requires a tile that extends to the bottom pan/trough of the panel. Steel top trim.

Frames: The panel frame is made with four, 16 gauge (0.060”, 1.5mm) roll formed steel tubes welded together at the corners into a rectangular frame. The vertical tubes are slotted to allow components to be mounted in 1” (25.4mm) increments. Steel legs made from 14 gauge (0.075” thick, 1.9mm) steel are welded to the frame and support the bottom trough that encloses the optional power system and cabling pathway when raceway covers are installed. The vertical panel frame tubes include punched openings to allow for attachment to adjoining panels or corner blocks using connector bolts, as well as an opening for routing power and optional communication cabling thru the panel frame. Horizontal aligner/light blocks made with 18 gauge (0.048”, 1.2mm) steel are separately specified and align and support segmented tiles, and block light between them. The roll formed steel base raceway cover conceals an 8" (203mm) high pathway. Horizontal tubes and light blocks are punched to allow vertical routing of power and communication cabling through each side of the panel frame. The frame can also be retrofitted for power and data at standing height level. Panel frames allow for attachment of numerous types of separately specified tiles and provide an assembled thickness of 3” (76.2mm). A steel pan/trough is secured to the bottom of the panel legs with screws. Panel frames can be specified with or without raceway covers and with an open base. Frames allow for raceway power on one side and full tile to floor on other, or full tile to floor on both sides.

Tiles: All tile types have metal engagement hooks or brackets for attachment to panel frame. Tiles are available with the following surface options: Fabric Tiles have a 21-gauge (.033", 0.84mm) steel frame and a glass fiber-board that provides acoustic and tackable properties. Fabric is bonded to the frame and board with adhesive. A separately specified acoustical insert is available that provides a higher acoustical rating. Tiles can be specified with power and data access. Painted tiles are constructed of 21-gauge (.033", 0.84mm) steel and have a powder coat finish. Wood tiles are constructed of wood composite board with wood veneer adhered to the front and a balancing veneer on the back. The edges are finished with .028” (.7mm) thick wood veneer that matches the face. Tiles can be specified with power and data access. Slat tiles are constructed of extruded aluminum with a powder coat finish and allow mounting of various types of paper and accessory management devices. Tiles can be specified with power and data access. Markerboard tiles are constructed of wood composite board with a white markerboard laminate covering and balancing backer and are edgebanded with white plastic 0.04”

PANEL-HUNG COMPONENT SYSTEM FURNITURE 12 5913 - 3

(1mm) thick edgeband. Laminate tiles are constructed of wood composite board with a laminate covering and balancing backer and are edgebanded with plastic 0.04” (1mm) thick edgeband. Tiles can be specified with power and data access. Glazed tiles are constructed of two sets of four extruded aluminum rails machined and connected with threaded fasteners to form a frame. One of the frames has a 0.120" (3mm) thick pane of clear or frosted tempered glass. The frame rails have a powder coat finish.

Electrical: The electrical distribution system is included with powered panel frames and glass panels. Power can be specified at the base on glass panels, at the base and at beltline on panel frames. Optional field installed power options are available at the below worksurface and standing height positions on panel frames. The overall system is PVC Free and consists of a variety of in-feeds to bring power to the panels, power distribution assemblies and flexible connectors that route power through the panels and several types of receptacles that allow access to the power. The system has eight-wires and can be specified with one, 3-circuit and two, 4-circuit wiring configurations. The electrical distribution system is UL listed and CUL certified (UL Mark for Canada). Each circuit is rated for 20-amps at 125 volts. The 3-circuit version has 3 hot, 3 neutral, 1 common and 1 isolated ground. All the wires in the 3 circuit version are 12 American Wire Gauge (AWG). The electrical system has the ability to contain four (4) triplex receptacles per panel base raceway, two (2) per side, and four (4) triplex receptacles per under worksurface, beltline, or standing height position, two (2) per side. Both wiring configurations provide multiple isolation and dedication of circuits. Receptacles are unique for each system. The 3-circuit 15 amp receptacles are field programmable to all three circuits. The 8.5" (171mm) high x 3” (76mm) deep panel base pathway contains the power system and will accommodate communication cables. The system offers an electrical retro-fit kit that can be installed without removal of the glass panel or panel frame from the run. The system is an integral part of the panel configuration, whether the electrical components are factory or field installed. An over-molded, flexible plastic enclosed eight-conductor flexible power connector with safety latches is included with each powered panel. A separately specified over-molded, flexible plastic enclosed eightconductor straight-span power connector with safety latches is available for spanning power across three- and four-way non-powered panel junctions to continue power in an electrified panel run.

Electrical power enters the panel at each end, top or bottom, or either side of the electrical base raceway at pre-punched locations with separately specified in-feeds.

Data to be pulled by other.

All electrical systems are designed in compliance with the National

Electrical Code.

Power fed from wall box. Receptacle Mounted Base In-Feeds provide interface with building power and mounts to powerway at duplex outlet location. No power poles.

Reference drawings for receptacle and in-feed locations.

PANEL-HUNG COMPONENT SYSTEM FURNITURE 12 5913 - 4

Vendor responsible for coordination of electrical hard wire.

Coordinate with Electrical Contractor.

Panel Connectors and Trim Connectors for in-line conditions are 1⁄4 -20 carriage bolts with fender washers and nuts. The assembly for in-line connections is included with the frame. When configuring panels in 2-, 3-, or 4-Way conditions the specification of connector blocks and trim covers is required. This assembly consists of 3, metal corner blocks that bolt to the panel using the same fastener assembly for in-line conditions, plastic light blocks that snap onto the corner blocks, and a vertical trim cover for 2 and 3-Way conditions. The 2, 3, and 4-way connector blocks also include a top trim cover. T-mounts for off-modular panel connections and wall mount connections are also available. Trim covers: Thin Profile: End-of-run and inline, variable-height covers, are made of 21-gauge (.033", .76mm) roll-formed steel. Two- and three-way covers are extruded aluminum. Top cap for 2-, 3-, and 4-Way connectors is zinc die-cast with a powdercoat finish and steel spring clips that secure the top cap to the top corner block of the panel connector

Accessories: Reference specification section 124113 Desk Accessories for PM-1 and details.

Finishes: Laminate: Grade B, to be selected from manufacturer’s full range.

Matching laminate edge.

Metal: Metallic Silver

Fabric: Grade B, to be selected from manufacturer’s full range.

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

FREE-STANDING COMPONENT SYSTEM FURNITURE 12 5916 - 1

SECTION 125916– FREE-STANDING COMPONENT SYSTEM FURNITURE

Item Code: D-1, D-2

Description: Desk and Components

Manufacturer: Haworth or approved equal

Pre-Approved Alternates: Steelcase – Universal surfaces & storage

Herman Miller – Canvas panels and surfaces, Tu storage

Manufacturer’s Designation: Worksurfaces: Adaptables Pedestal: X-Series Overhead Cabinet: Adaptables Tackboard: Adaptables Hanging Modesty Panel: Planes

Dimensions: Worksurfaces: See Drawings Box/Box/File: Height: 28”; Depth: 24”; Width: 15” Overhead Cabinet: Height: 12.75”; Depth: 13.25”; Width: see plans Tackboard: Height: 16”; Width: see plans Hanging Modesty Panel: width: full width of surface; height: 1’-1”

Construction: Worksurfaces: Laminate with 3mm matching edgeband. Wireways as shown on drawings. Entire desk to have same direction wood graining. Provide required supports as needed.

Pedestals: Metal case and fronts. Pedestal with pencil drawers and or box drawers includes a single pencil tray. Box drawers include one divider in each drawer. File drawers include one compressor in each drawer. Drawers have full extension steel ball-bearing glides. Applied pull (Classic). Drawer interiors and accessories are black finish. Glides provide 1.5” adjustment range.

Overhead Cabinet: Wall mounted. Metal case and fronts. Flipper Door hinges and stores on top of unit. Lockable. Standard mount. Back stop.

Modesty Panel: Laminate.

Tackboard: Wall mounted tackable fabric.

CM-1 details.

Matching Edgeband Fabric: Grade B, to be selected from manufacturer’s full range.

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager

FREE-STANDING COMPONENT SYSTEM FURNITURE 12 5916 - 2

FREE-STANDING COMPONENT SYSTEM FURNITURE 12 5916 - 3

Item Code: D-3

Description: Desk and Components

Manufacturer: Haworth or approved equal

Pre-Approved Alternates: Steelcase – Universal surfaces & storage

Herman Miller – Canvas panels and surfaces, Tu storage

Manufacturer’s Designation: Worksurfaces: Adaptables Hanging Modesty Panel: Planes

Dimensions: Worksurfaces: See Drawings Hanging Modesty Panel: width: full width of surface; height: 1’-1”

Construction: Worksurfaces: Laminate with 3mm matching edgeband. Wireways as shown on drawings. Entire desk to have same direction wood graining. Provide required supports as needed.

Modesty Panel: Laminate.

CM-1 details.

Fabric: Grade B, to be selected from manufacturer’s full range.

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager Phone Number: 612-212-5691

FREE-STANDING COMPONENT SYSTEM FURNITURE 12 5916 - 4

Item Code: D-4 through D-7

Description: Desk and Components

Manufacturer: Haworth or approved equal

Pre-Approved Alternates: Steelcase – Universal surfaces & storage

Herman Miller – Canvas panels and surfaces, Tu storage

Manufacturer’s Designation: Worksurfaces: Adaptables

Dimensions: Worksurfaces: See Drawings

Construction: Worksurfaces: Laminate with 3mm matching edgeband. Wireways as shown on drawings. Entire desk to have same direction wood graining. Full supports metal H legs to be full depth of surface.

Intermediate supports to be mounted towards the back of the surface to allow for knee clearance. Reinforcement bars as needed.

Fabric: Grade B, to be selected from manufacturer’s full range.

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager

FREE-STANDING COMPONENT SYSTEM FURNITURE 12 5916 - 5

Item Code: D-8, D-9

Description: Desk and Components

Manufacturer: Haworth or approved equal

Pre-Approved Alternates: Steelcase – Universal surfaces & storage

Herman Miller – Canvas panels and surfaces, Tu storage

Manufacturer’s Designation: Worksurfaces: Adaptables

Dimensions: Worksurfaces: See Drawings

Construction: Worksurfaces: Laminate with 3mm matching edgeband. Wireways as shown on drawings. Entire desk to have same direction wood graining. Metal H leg. Reinforcement bars as needed.

Fabric: Grade B, to be selected from manufacturer’s full range.

Metal: Metallic Silver

Source: Courtney Griggs, Haworth Territory Sales Manager

FIRST FLOOR FURNITURE PLAN

1/16" = 1'

UP

UPUP UP

AR

EA

A

AR

EA

B

AREA B

AREA E

1018A

1077S11077S2

1446 1418 1416

1418A

1134A

1102 1100

C

1032A 1034

1077S3

14681470 1432 1430

1266A

1246 1202

62 12

1077E

AR

EA

B

AR

EA

C

1420A

1412A

1410A

1426A

A

1099U5 1099U4 1099U3

1302A

1302B

1099U1

1099U

1300A2 1300A1

1300A

1126 1124 1122 1120

1099W

A

A

A

A

B

1504B

1506B

1088F

B

1077S

1088D

1088G2

1088A

H

1506B4

1506B2

1504B4

1504B21504B6

1504B8

1504B10

1504B121504B16

1504B141504B18

1504B201504B24

1504B221504B26

1504B28

1506B26

1506B28 1506B24 1506B20 1506B16 1506B12 1506B8

1506B61506B101506B141506B181506B22

1088E

1260A

1020A

1099U2

1132A

1099M

1116 1116A

1116B

MECH

SHAFT

MECH

SHAFT

MECH

SHAFT

1088J

1088K

1302A1

10381088A-C

D

C

AREA A

AREA F

1504E28 1504E24 1504E20 1504E16 1504E12 1504E8 1504E4

1504E21504E61504E101504E141504E181504E221504E26

1504E1088L

1434C1434B1434A1466F1466E1466D

1466C 1466B 1466A 1434F 1434E 1434D 140610

G3

G1

1088G1A

C

D

D3

D1

C

C1

C2

D-4

C -1

S-1

F-1

C -1

F-1

C -1

C -1

T-1

S-1

C-4

C-1.1

S-1

S-1

LS

-1

F-1

C -1

F-1

C -1

C -1

S-

S-1

C -1

C-4

C -1

C -4

S-1

S-1

S-1

C-1.1

LS

-1

S-1

C-5

F-1

C -1

F-1

C -1

C -1

S-

S-1

S-1 S-1

T-1

SC

-1

S-1

S-1

D-4

CPT

D-4

MINI

FRIDGE

S-1

D-4

S-1

S-1

S-1

CPT

D-1

C -1

C-5

CPT

S-1

C-1.1

D-4

C-1.1

C-1.1

S-1

S-1

S-1

S-1

S-1

C-4

MINI

FRIDGE

C-4

D-4

S-1

S-1

CPT

S-1

C -1

C-6

S-1

C -1

C-1.1

D-1

D-4

S-1

CPT

C -2

S-1

S-1

S-1

S-1

C-4

C-5

CPT

S-1

F-1

C -1

F-1

C -1

C -1

CPT

S-1

D-4

D-4

C -1

S-1

S-1

C -1

C-5

C -1

CPT

S-1

S-1

T-1

S-1

S-

S-1

F-1

C -1

F-1

C -1

C -1

S-1

T-6

LS

-1

D-4

S-1

MINI

FRIDGE

C -1

S-1

D-1

C-3

F-1

C -1

F-1

C -1

C -1

SC-2

S-1

S-1

S-1

F-1

C -1

F-1

C -1

C -1C-4

S-1

S-1

C-5

S-1

S-1

C -1

F-1

C -1

F-1

C -1

C -1

D-1

S-1

C-6

S-1

C-1.1

MINI

FRIDGE

MINI

FRIDGE

MINI

FRIDGE

C-1.1

C-1.1

S-1

S-1

C -1

S-1

F-1

C -1

F-1

C -1

C -1

C-1.1

F-1

C -1

F-1

C -1

C -1

S-1

LS

-1

C -1

D-1

D-4

CPT

C-1.1

C -3

S-1

S-

C-6

D-4

D-5

S-1

S-1

CPT

D -9

S-1

C-5

C -1

T-1

C-6

F-1

C-4

C -1

S-1

D-1

S-1

S-1

WS-1

S-1

F-1

C -1

F-1

C -1

C -1

S-1

SC

-4

S-1

C-1.1

S-1

C -5

C -5

D-4

S-1

S-1

C -5

S-1

SC

-2

CPT

S-1

D-4

MINI

FRIDGE

D-4

C -1

S-1

S-1

C-1.1

C -1

.1

S-1

C -1

S-1

SC-1

S-1

S-1

S-1

S-1

T-3

S-1 S-1

MINI

FRIDGE

S-1

D-1

S-1

D-4

S-1

S-1

T-6

C-6

D-1

C-3

C-3

T-9

S-1

S-1

MINI

FRIDGE

MINI

FRIDGE

S-1

C-4

S-1

S-1

C-1.1

S-1

D -9

T-3

S-

C-6

C -1

CPT

C-1.1

S-1

F-1

C -1

F-1

C -1

C -1

C-5

F-1

C -1

F-1

C -1

C -1

C -5

S-1

WS-1

C-5

F-1

C -1

F-1

C -1

C -1

S-1

S-1

S-

F-1

C -1

F-1

C -1

C -1

S-1

C-5

S-1

D-4

C-1.1C-1.1

T-1

C -4

C-5

S-1

C-1.1

C-5

LS

-1

S-1 S-1

S-

LS

-1

MINI

FRIDGE

F-1

C -1

F-1

C -1

C -1

C -1

C -1

S-1

C-1

S-1

MINI

FRIDGE

C-1.1

S-1 C-1.1

F-1

C -1

F-1

C -1

C -1

S-1

C-5

C -1

.1

C -1

P-

S-1

S-1

S-1

S-1

T-1

C-6

MINI

FRIDGE

S-1

C-1.1

D-7

D-1

S-1

S-1

D-1

C-1.1

S-1

C-6

CPT

S-1

C-5

C -4

S-1

C-6

S-1

MINI

FRIDGE

C -1

D-4

C -1

S-

D-1

C-1.1

S-1

S-1

T-10

S-1

S-1

C-1.1

C -2

S-1

C -1

C-3

F-1

C -1

F-1

C -1

C -1

S-1

C-6

MINI

FRIDGE

C -5

C-1.1

S-

S-1

C-3

S-1

C-5

C -1

S-1

F-1

C -1

F-1

C -1

C -1

S-1

S-1

S-

S-1

F-1

C -1

F-1

C -1

C -1

T-1

S-1S-1

S-1

CPT

S-1

S-1

S-1

C-6

S-1

D -8

C-6

S-

S-1

C-5

S-1

C -1

C-6

T-10

D -2

S-1

MINI

FRIDGE

C-5

MINI

FRIDGE

LS

-1

S-1

F-1

C -1

F-1

C -1

C -1

MINI

FRIDGE

T-1

C-4

C-3

C-1.1

C-4

C -1

S-1

S-1

T-6

S-1

S-1

CPT

S-1

S-1 F-1

C -1

F-1

C -1

C -1

F-1

S-1

C-1.1

C-3

C-1.1

S-1

C -5

S-1

S-1

MINI

FRIDGE

S-1

C-1.1

S-1

D-4

C-4

S-1

CPT

TR

A

SH

B

Y O

W N

ER

D-1

F-1

C -1

F-1

C -1

C -1

C-6

S-1

S-1

S-1

D -3

C -1

D-4

S-1

C-4

S-1

S-1

S-1

C-1.1

C-6

S-1

S-1

C -1

S-1

LS

-1

F-1

C -1

F-1

C -1

C -1

F-1

C -1

F-1

C -1

C -1

S-1

D-4

MINI

FRIDGE

MINI

FRIDGE

C -3

MINI

FRIDGE

C-1.1

C -1

MINI

FRIDGE

D-4

S-1

S-1

S-

S-1

MINI

FRIDGE

F-1

C -1

F-1

C -1

C -1

C-4

C-5

S-1

MINI

FRIDGE

S-1

S-1

D-4

C-5

S-1

C -2

C-1.1

T-10

C-6

T-2

S-1

F-1

C -1

F-1

C -1

C -1

S-1

MINI

FRIDGE

D-1

D-4

C -1

C-3

S-1

S-1 www.jlgarchitects.com copyright © 2025

A

N O

T

FO

R

CO

N

ST

RU

CT

IO

N

D

B

FURNITURE

PROCUREMENT

JL

G

AR

CH

IT

EC

TS

10/13/2025

FIRST FLOOR

FURNITURE PLAN

PROJECT

215 Broadway, 7th Floor Fargo, ND 58102 phone (701) 364-0237

SHEET

N

DS

U F

IE

LD

S O

IL

S

LA

B

PR

EL

IM

IN

AR

Y

C

23197

PHASE

E

DATE

5 1

8T

H

ST

N , F

AR

GO

, N D

/1

3/

2:

:5

PM A800

BU

IL

DI

N

G

SECOND FLOOR FURNITURE PLAN

1/16" = 1'

UP

UP

UP

CANOLA/OIL SEED

PATHOLOGY

LAB OFFICE

PULSE CROP /BEAN

CROP PATHOLOGY

APPLIED RESEARCH

SPECIALTY CROP

PATHOLOGY

LAB OFFICE

WHEAT PATHOLOGY

RUST PATHOLOGY

LAB OFFICE

LAB OFFICE

LAB OFFICE

LAB OFFICE

BARLEY PATHOLOGY

APPLIED RESEARCH

INSECTS

NEW CROPS

LABORATORY

APPLIED RESEARCH

SMALL GRAIN/BROAD

LEAF

LAB OFFICE

LAB OFFICE

DATA

LAB OFFICE

HIGH THROUGHPUT

PHENOTYPING LAB

STAIR 1

2077S1

STAIR 2

2077S2

MEN'S RESTROOM

2099M

HUDDLE

LACTATION

2099L

STAIR 3

2077S3

MECHANICAL

HALLWAY

2088A2

WOMEN'S

RESTROOM

2099W

HUDDLE

HUDDLE

HUDDLE

HUDDLE

HUDDLE

HUDDLE

HUDDLE

HUDDLE/ REFLECTION

ROOF ACCESS

CH

AS

E

2077E

ELEV 1

L1

L1

L1

L1

L1

L1

L1

L1

L1

L1

L1

<FCAB-1>

<FCAB-1>

MONUMENTAL STAIR

1077S

(ACC PNL-1)

(ACC PNL-1)

FL3

C -1

C -1

S-1

F-1

C -1

F-1

C -1

C -1

S-1

T-4

S-1

C-3

S-1

T-5

MINI

FRIDGE

C -4

D-4

F-1

C -1

F-1

C -1

C -1

C -4

F-1

C -1

F-1

C -1

C -1

C -1

S-1

S-1

C-3

C -4

C -1

CPT

CPT

F-1

C -1

F-1

C -1

C -1

S-1

S-1

S-1

C -3

T-8

CPT

F-1

C -4

CPT

C -1

C -4

S-1

C -1

S-1

S-1

T-8

D-4

F-1

C -1

F-1

C -1

C -1

D-4

C-4

MINI

FRIDGE

C -1

S-1

C-3

D-4

S-1

C -4

C -4

S-1

S-1

LS-2

D -5

S-1

S-1

S-1

C -4

MINI

FRIDGE

C -4

S-1

S-1

D-4

S-1

F-1

S-1

S-1

MINI

FRIDGE

F-1

C -4

C -1

TABLE TO HAVE CUT OUT FOR AV

PROVIDED POWER MODULE

C -4

C-4

F-1

C -1

F-1

C -1

C -1

TABLE TO HAVE CUT OUT FOR AV

PROVIDED POWER MODULE

S-1

MINI

FRIDGE

CPT

CPT

TABLE TO HAVE CUT OUT FOR AV

PROVIDED POWER MODULE

CPT

S-1

C-3

MINI

FRIDGE

S-1

S-1

T-7

D-4

MINI

FRIDGE

C -1

S-1

D-6

C -4

MINI

FRIDGE

S-1

S-1

T-9

S-1

C -1

S-

T-2

C -4

CPT

T-7

C -1

C-3

S-1

C -4

D-5

C-3

F-1

C -1

F-1

C -1

C -1

S-1

S-1

C -4

C-4

C -1

S-

S-1

C -4

S-1

T-7

S-1

F-1

C -1

F-1

C -1

C -1

C -4

C

UB

BI

ES

C-3

MINI

FRIDGE

CPT

S-1

SC

-4

C -4

F-1

C -1

F-1

C -1

C -1

D-4

S-

S-

S-1

S-1

C -4

S-1

TABLE TO HAVE CUT OUT FOR AV

PROVIDED POWER MODULET-4

S-1

C -3

S-1

C -4

T-5

SC

-3 C-3

B

PR

EL

IM

IN

AR

Y

N

DS

U F

IE

LD

S O

IL

S

LA

B

C

E

FURNITURE

PROCUREMENT

D

SECOND FLOOR

FURNITURE PLAN

PHASE

PROJECT

DATE

JL

G

AR

CH

IT

EC

TS

A801

215 Broadway, 7th Floor Fargo, ND 58102 phone (701) 364-0237

N O

T

FO

R

CO

N

ST

RU

CT

IO

N

/1

3/

2:

:4

PM

www.jlgarchitects.com copyright © 2025

BU

IL

DI

N

G

A

SHEET

10/13/2025

7 1

8T

H

ST

N , F

AR

GO

, N D

23197

FIRST FLOOR FURNITURE PLAN - AREA A

1/8" = 1'

C

A

A

1504B

1506B

H

1506B4

1506B2

1504B4

1504B21504B6

1504B8

1504B10

1504B121504B16

1504B141504B18

1504B201504B24

1504B221504B26

1504B28

1506B26

1506B28 1506B24 1506B20 1506B16 1506B12 1506B8

1506B61506B101506B141506B181506B22

1088J

1088K

1466D

1466C

C

S-1

S-1

C-1.1

C-1

C-4

D-1

CPT

S-1

CPT

C-1.1

S-1

C-4

S-1

CPT

C-4

S-1

C-1.1

D-1

S-1

D-1

N

DS

U F

IE

LD

S O

IL

S

LA

B

SHEET

C

JL

G

AR

CH

IT

EC

TS

B

D

/1

3/

2:

:4

PM

PR

EL

IM

IN

AR

Y

FURNITURE

PROCUREMENT

www.jlgarchitects.com copyright © 2025

10/13/2025

PHASE

215 Broadway, 7th Floor Fargo, ND 58102 phone (701) 364-0237

DATE

23197

N O

T

FO

R

CO

N

ST

RU

CT

IO

N

E

7 4 1

BU

IL

DI

N

G

A810A

A

8T

H

ST

N , F

AR

GO

, N D

FIRST FLOOR FURNITURE

PLAN - AREA A

PROJECT

FIRST FLOOR FURNITURE PLAN - AREA B

AR

EA

A

AR

EA

B

1134A

C

AR

EA

B

AR

EA

C

1302A

1302B

1099U1

1099U

1300A2 1300A1

1300A

A

1099U2

1302A1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

S-1

/1

3/

2:

:4

PM

A

SHEET

N O

T

FO

R

CO

N

ST

RU

CT

IO

N

FURNITURE

PROCUREMENT

E

8T

H

ST

N , F

AR

GO

, N D

10/13/2025

PR

EL

IM

IN

AR

Y

C

D

23197

PROJECT

B

215 Broadway, 7th Floor Fargo, ND 58102 phone (701) 364-0237

BU

IL

DI

N

G

A810B www.jlgarchitects.com copyright © 2025

PHASE

DATE

JL

G

AR

CH

IT

EC

TS

FIRST FLOOR FURNITURE

PLAN - AREA B

N

DS

U F

IE

LD

S O

IL

S

LA

B

FIRST FLOOR FURNITURE PLAN - AREA C

1134A

1102 1100 1088

1300A1

1300A 1144

1126 1124 1122 1120

1130 1132A

1116 1116A

1116B

MECH

SHAFT

C

C1

C2

S-1

S-1

S-1

C -1

S-1S-1

S-1

S-1

SC-1

C -4

S-1

S-1

S-1

C -1

S-1

MINI

FRIDGE

S-1

S-1

S-1

S-1

D-4

S-1

C -1

S-1S-1

F-1

C -1

F-1

C -1

C -1

F-1

C -1

F-1

C -1

C -1

D-4

MINI

FRIDGE

D -3

S-1 S-1

B

A

N

DS

U F

IE

LD

S O

IL

S

LA

B

8T

H

ST

N , F

AR

GO

, N D

215 Broadway, 7th Floor Fargo, ND 58102 phone (701) 364-0237

FIRST FLOOR FURNITURE

PLAN - AREA C

A810C

PR

EL

IM

IN

AR

Y

D

N O

T

FO

R

CO

N

ST

RU

CT

IO

N

5 1

10/13/2025

C

PHASE

4 3

/1

3/

2:

:4

PM

23197

E

BU

IL

DI

N

G

JL

G

AR

CH

IT

EC

TS

PROJECT

SHEET

www.jlgarchitects.com copyright © 2025

5 2

FURNITURE

PROCUREMENT

DATE

FIRST FLOOR FURNITURE PLAN - AREA D

1/8" = 1' AR

EA

D

AR

EA

E

1446 1418 1416

1418A

14681470 1432 1430

1420A

1412A

1410A

1426A

A

1099U5 1099U4 1099U3

1099U

1300A2 1300A1

A

1088F

1088G2

1088E

1302A1

1088A-C

1434C1434B1434A1466F1466E1466D

1466C 1466B 1466A 1434F 1434E 1434D 140610

G3

G1

1088G1A

C

D

D-4

F-1

C -1

F-1

C -1

C -1

T-1

C-4

C-1.1

S-1

S-1

S-

C-4

C -1

S-1

C-1.1

C-5

T-1

C-4

S-1

D-4

CPT

MINI

FRIDGE

D-4

CPT

D-1

C -1

C-5

C-1.1

D-4

C-1.1

C-1.1

C-4

C-4

CPT

C-6

C-1.1

C-1.1

S-1

S-

C-4

C-5

CPTCPT

S-1

D-4

S-1

S-

C -1

C-5

CPT

S-

C-6

T-6

D-1

S-1

C-4

C-5

S-1

S-

D-4

D-1

S-1

C-6

C-1.1

MINI

FRIDGE

C-1.1

C-1.1

C -5

C -1

C-1.1

F-1

C -1

F-1

C -1

C -1

D-1

CPT

C-1.1

C-1.1

S-

C-6

CPTCPT

S-1

C-5

T-1

C-6

T-6

C-4

S-1

D-1

S-1

S-1

WS-1

C-1.1

MINI

FRIDGE

C -5

S-1

CPT

F-1

C -1

F-1

C -1

C -1

MINI

FRIDGED-1

C-5

D-1

MINI

FRIDGE

C-5

C-4

C-1.1 C-1.1

CPT

C-1.1

C-5

WS-1

F-1

C -1

F-1

C -1

C -1

S-1

C-1.1

T-6

C-1.1

C-5

P-

S-1

T-1

C-1.1

D-1

S-1

S-1

D-1

C-6

C-5

C-6

S-1

C -2

C-4 C-6

C -5

C-1.1

D-4

D-1 C-5

T-1

C-1.1

C-6

CPT

C-6

C-6

C-1.1

C -1

C-6

T-10

C-4

C-6

F-1

C -1

F-1

C -1

C -1

CPT

C-1

S-1

C-6

D-1

C -2

F-1

C -1

F-1

C -1

C -1

C-5

F-1

C -1

F-1

C -1

C -1

S-1

S-

C-1.1

S-1

CPT

S-

S-

TR

A

SH

B

Y O

W N

ER

D-1 C-6

T-3

T-10

C-1.1

S-1

S-1

T-3

C-4

S-1

S-1

C-1.1

C -5

C-1.1

S-1

C-5

C-1.1

S-1

S-

MINI

FRIDGE

C-1.1

C-1.1

S-

C-5

S-1

C -2

S-

C-4

C-5

S-1

S-1

C-1.1

S-1

C-5

C -5

C -2

C-1.1

C-5

S-1

T-10

C-6

S-1

C -1

S-1

C -5

D-1

MINI

FRIDGE

C -1

S-1

S-1

E

D

215 Broadway, 7th Floor Fargo, ND 58102 phone (701) 364-0237

N O

T

FO

R

CO

N

ST

RU

CT

IO

N

A

8T

H

ST

N , F

AR

GO

, N D

B

A810D

PHASE

JL

G

AR

CH

IT

EC

TS

23197

FURNITURE

PROCUREMENT

/1

3/

2:

:4

PM

C

FIRST FLOOR FURNITURE

PLAN - AREA D

DATE

PROJECT

N

DS

U F

IE

LD

S O

IL

S

LA

B www.jlgarchitects.com copyright © 2025

10/13/2025

BU

IL

DI

N

G

SHEET

PR

EL

IM

IN

AR

Y

FIRST FLOOR FURNITURE PLAN - AREA E

UP

UPUP UP

AREA B

AREA E

1018A

1077S11077S2

1032A 1034

1077S3

1266A

1246 1202

62 12

1077E

1099W

A

A

B

B

1077S

1088D

1088A

1260A

1020A

1099M

MECH

SHAFT

MECH

SHAFT

SHAFT

D

C

D3

D1

T-9

C -1

S-1

F-1