Dezurik cast stainless-steel knife-gate valve.pdf
PDF 132 KB Posted
- Solicitation number
- 36C25920Q0679
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 08AS301 JSI060.pdf | ||
| S02 - 2015-06-05 Past Performance Questionnaire.docx | DOCX document | |
| 08AS201.pdf | ||
| CBC - Pages from Plumbing_Piping_As-Builts.pdf | ||
| CBN - 08PL100_JSI044.pdf | ||
| Sanitary Sewer Photos 1 of 2.zip | ZIP file | |
| 04 30 0012 CBN Stone Veneer SD.pdf | ||
| PDF Contaminated zone cleaning procedures.pdf | ||
| 09SS101.pdf | ||
| CBC - 09PL100_JSI044.pdf | ||
| XXSS550_CD6.pdf | ||
| 36C25920Q0679_1.docx | DOCX document | |
| 08SS101.pdf | ||
| Excavation OSHA.pdf | ||
| 554-19-130 Specifications.pdf | ||
| 09AS201.pdf | ||
| Sanitary Sewer Photos 2 of 2.zip | ZIP file | |
| 22 13 00_JSI041.pdf | ||
| CBN - Pages from Plumbing_Piping_As-Builts.pdf | ||
| PDF Cleaning and Sanitizing factsheet.pdf | ||
| 09AS301 JSI060.pdf |
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
www.dezurik.com
DeZURIK KGN-RSB BI-DIRECTIONAL
CAST STAINLESS STEEL
KNIFE GATE VALVES
BULLETIN 29.00-1C
DECEMBER 2016
Design & Construction DeZURIK KGN-RSB Bi-Directional Cast Stainless Steel Knife Gate Valves are resilient seated valves designed for isolation, on-off applications in corrosive, abrasive liquid applications including: Pulp and Paper, Mining, Waste Water, Chemical, Petrochemical, Power and Steel.
KGN-RSB Resilient Seated Bi-Directional Knife Gate Valves are available in sizes 2-24" (50-600mm).
Bi-Directional Shutoff The Bi-Directional Knife Gate Valve provides bubble tight shutoff in both directions up to the full rating of the valve. There is no recommended flow direction and the valve does not require line pressure to seal.
The interference fit between the gate and resilient seat provides bubble tight shutoff even under the lowest pressure. The valve can be used in either direction on dead end service.
Flow Capacity Round port design per MSS-SP-81 requirements allows high flow capacity and minimum pressure drop.
Seat Locked in Valve Body for Full Pressure, Bi-Directional, Dead End Service The flat bottom gate provides full perimeter seating.
The perimeter seat is locked into the body dovetail groove. The resilient perimeter seat provides bubble tight shutoff in either direction, even on dead end service. Valves are rated to 150 psig (1035 kPa) cold working pressure (CWP).
Gate
Seat
Body
Raised Face
Drilled and Tapped Flange Lug
DeZURIK, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation.
Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing by DeZURIK, Inc. Certified drawings are available upon request.
Printed in the U.S.A.
250 Riverside Ave. N. Sartell, Minnesota 56377 • Phone: 320-259-2000 • Fax: 320-259-2227
For information about our worldwide locations, approvals, certifications and local representative:
Web Site: www.dezurik.com E-Mail: info@dezurik.com
Sales and Service
Choice of Resilient Seat Materials Seats are available in your choice of EPDM, NBR or FKM to provide the seat material option that performs best for your media and operating temperature.
Long Life Packing Square Braided PTFE packing material assures a tight seal with minimum packing gland pressure.
End Connections Raised face body has drilled and tapped flange lugs in accordance with ASME B16.5 150 Lb. drilling dimensions. International standard flange drilling is available.
One-Piece Cast Corrosion Resistant Body The heavy-duty, cast 316 stainless steel body provides corrosion and abrasion resistance on liquid slurry applications. The all stainless body, chest, and packing chamber provide durability and integrity for all wetted parts. Bodies in 304 stainless steel are available.
Precision Ground Stainless Steel Gate The 316 stainless steel gate is precision ground on all sides with beveled edges to maximize packing life.
Gates in 304 stainless steel are available.
Corrosion Resistant Packing Gland The packing gland is stainless steel for corrosion resistance. Packing gland bolts are easily accessible for adjustments.
Stainless Steel Stem & Superstructure All valves are furnished with a stainless steel stem and superstructure that assures easy operation and dependable service.
Actuators & Accessories Actuator options include handwheels and cylinders.
A full complement of accessories are also offered.
File details come from the government source that posted it. Updated .