attachment to amendment 4.pdf
PDF 25 KB Posted
- Attached to
- Fabricated Structural Steel in support of Western Area Power Administration Electrical Substations
- Solicitation number
- DE-RQ65-11WA46685
About this file
Attachment to Amendment 0004
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1. Question: For the spare busing rack can the angles with the slotted holes be made from bent plate? We would like to cut the slotted holes with our high definition plasma table from plate and then bend into angles.
Response:
This process can be done for the spare bushing rack only. There will be other structures that have slotted holes in angles that cannot be made out of plate.
2. Question: A question that was not addressed was if the galvanizing could be performed in a multiple dip process due to required lengths or is it required to have a single dip.
Response:
Multiple dip is not allowed, it is required to be single dip.
File details come from the government source that posted it. Updated .