DEM Door Hardware Upgrade Scope of Work.docx

Attachment AA

Nevada Army National Guard Construction and Facilities Management Office Scope of Work Summary

Date: August 22, 2025 Project: DEM – Door Hardware Upgrade

General Intention: This scope of work is intended to include all the work required to complete the project described below. Contractors who submit bids are required to include and disclose in their bid all work deemed necessary to complete the project.

Task(s):

The State of Nevada, The Office of the Military, is seeking bids/proposals from qualified contractors to perform installation, repair or maintenance needs, on door and door hardware replacement.

Scope of Work:

The contractor shall fabricate and install new doors and hardware to doors listed below. Contractor is responsible for all materials, tools, hardware, and labor to complete this project. Contractor is also responsible for properly disposing of all materials that have been removed from this project.

a. Emergency Management: (2) Single Exterior Doors Hardware Replacement

a. Remove existing rim panic assemblies

b. Prep and install (2) new rim panic assemblies with NO dogging devices

c. Paint or power coat doors to match

b. Emergency Management: (1) Single Interior Vestibule door hardware replacement

a. Remove existing rim panic assemblies

b. Prep and install (1) new rim panic assemblies with NO dogging devices

c. Paint or power coat doors to match

c. Exterior Metal Door Replacement: (4) Metal Door replacement Along with Hardware. Including securing new hinges in place, alignment of the door in the opening for proper clearance, lubrication of all moving parts, and ensure proper operation of the complete door system. (4) New Hollow Metal Door for the existing opening complete with the following benefits:

a. Fabricated from 18 gauge cold rolled steel rated at 45 psi crush

b. Exceptional strength and noise-absorption characteristics

c. Full length positive mechanical interlock with no weld marks

d. Full honeycomb core to provide rigidity and impact resistance

e. Backed on gray primer for optimum paint adhesion

f. New non-removable hinges

g. New electrified rim panic locking hardware

h. New transfer hinge

i. New clear glass vision lite kits

j. New surface mount closers

k. Sweep strips on the bottom of the door(s)

l. Paint or power coat doors to match

d. Interior Metal Door replacement: (3) New Hollow Metal Door replacement along with hardware. Including securing new hinges in place, alignment of the door in the opening for proper clearance, lubrication of all moving parts, and ensure proper operation of the complete door system.

a. Fabricated from 18 gauge cold rolled steel rated at 45PSI crush

b. Exceptional strength and noise-absorption characteristics

c. Full length positive mechanical interlock with no weld marks

d. Baked on gray primer for optimum paint adhesion

e. New non-removable hinges

f. New push/pull plates

g. New push/pull plates

h. New clear glass vision lite kits

i. New surface mount closers

j. Sweep strips on the bottom of the door(s)

k. Paint or power coat doors to match

e. Double Door Moto Room: (1) new pair of Hollow Metal Doors for existing opening complete with the following. This includes securing new hinges in place, alignment of the door in the opening for proper clearance, lubrication of all moving parts, and ensure proper operation on the complete door system.

a. Fabricated from 18 gauge cold rolled steel rated at 45PSI crush

b. Exceptional strength and noise-absorption characteristics

c. Full length positive mechanical interlock with no weld marks

d. Full honeycomb core to provide rigidity and impact resistance

e. Baked on gray primer for optimum paint adhesion

f. New non-removable hinges

g. New locking hardware

h. New pair of manual flush bolts

i. New pair of Fire Louvers

j. Sweep strips on the bottom of the door(s)

k. Paint or power coat doors to match

Location:

DEM

2478 Fairview Dr.

Carson City, NV 89701