Data Item Description (DID).pdf
PDF 20 KB Posted
- Attached to
- TUBE ASSEMBLY, METALLIC Federal contract opportunity
- Solicitation number
- FA812125Q0020
About this file
This Data Item Description (DID) outlines the requirements for a First Article Qualification Test Plan and Procedures, specifically DI-NDTI-81307A approved on 21 NOV 2006. The document provides detailed instructions for contractors preparing a test plan that establishes test procedures, test equipment, and inspection criteria for first article qualification. Key content requirements include:
The test plan must cover the purpose of the test, applicable documents, description of units to be tested, and a comprehensive test description. This includes step-by-step operator procedures, specific readings and settings, test equipment details, and noncommercial fixture documentation. Most critically, the plan must define inspection criteria that establish minimum performance requirements the tested unit must meet to be considered acceptable to the Government, including worst-case scenarios for prime power input, signal levels, and timing inputs and outputs.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA812125Q0020.pdf | ||
| Packaging Requirements.pdf | ||
| Item Description Report.pdf | ||
| Contract Data Requirement List.pdf | ||
| Transportation Data Report.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .