d. Dispensers.pdf

The SJS-1100 manual foaming soap dispenser uses a bag-type refill that simplifies replacement and reduces waste.

This manual dispenser delivers a pre-measured amount of liquid that transforms into foam via its foaming technology. This dispenser provides approximately 1200 applications per refill.

The sight glass indicates low soap level.

• Pre-measured soap per use

• Push-style dispensing mechanism

• Easy-to-replace refills, no contamination

• Attaches to any wall in minutes

Product Number: SJS-1100 Product Code: 7000003 Color: Chrome Size: W 5.31” x D 4.41” x H 10.04”

(W 135 mm x D 112 mm x H 255 mm) Quantity/pack: 1 Quantity/case: 6

Refills:

Product No. Description Order No.

SJS-1101 Manual Wall-Mount Foam Soap 5700500

SJS-1101-2 Manual Wall-Mount Foam Soap Antimicrobial 5700502

SJS-1100

MANUAL WALL-MOUNT

FOAMING SOAP DISPENSER

5.28" (134 mm)

2.17" (55 mm)

Mounting hole

1.417" (36 mm)

10.04" (255 mm)

5.31" (135 mm)

4.41" (112 mm)

S

JS

-1100

Sight glass indicates low soap level.

Chrome plate finish complements restroom style.

Manually dispenses pre-measured foam soap.

Mounts quickly, conveniently.

Sloan HEALTHMINDER™ Products 10500 Seymour Avenue Franklin Park, IL 60131-1259 Phone: 877-652-6726 Fax: 800-447-8329 www.sloanvalve.com

The information contained in this document is subject to change without notice.

©2010 Sloan Valve Company Rev. 0 11/10

Technical Data

Finish Face of Wall

53-3/16'' 1350mm

S

3-5/8'' 92mm

S 9/16'' 14mm

2'' 50mm

R ec om m en de d M ou nt in g

H ei gh t O ff F lo or to

6' to

0m m

R ec om m en de d M ou nt in g

H ei gh t O ff F lo or

Fo r

A cc es si bl e

D es ig n

-3

/4

0m m

11-1/16'' 280mm

S S

55-1/8'' 1400mm

34-1/4'' 870mm

13'' 330mm

S S

Lock & Key

Door

Lock

Removable Waste

Receptacle

Paper Towel Dispenser

48'' 1220mm Maximum Mounting

Height (Refer to ADA H/C)

12-11/16'' 322mm

Finish Face of Floor materials:

Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construction.

Door — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin-finish. 9/16" (14mm) 90° return for maximum rigidity. Secured to cabinet with a concealed, full-length, stainless steel piano-hinge. Equipped with stainless steel cable door-swing limiter and two tumbler locks keyed like other Bobrick washroom accessories.

Skirt — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-finish.

Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Rounded towel tray has hemmed opening to dispense paper towel without tearing. Capacity: 600 C-fold, 800 multifold, or 1100 singlefold paper towels.

Waste Container — Leakproof, rigid molded plastic. Removable for servicing. Capacity: 6.3-gal. (24-L).

Optional: Order Bobrick Model No. 3803-130 TowelMate® available as an optional accessory. TowelMate accessory allows for paper towels to dispense one at time without bulging or sagging, or falling through the towel tray opening. The 90 degree return on the towel guide prevents papers from falling forward and out when door is opened for servicing. TowelMate fits most other manufacturers' similar models.

operation:

Paper towel dispenser is adjustable to dispense C-fold, multifold, or singlefold paper towels without use of additional adapters or towel trays. To service waste receptacle, unlock door with key provided and remove waste container. Cable door-swing limiter prevents damage to washroom accessories and walls.

installation:

Provide framed rough wall opening 11-1/2" wide x 53-5/8" high (292 x 1362mm). Minimum recessed depth required from finish face of wall is 3-3/4" (95mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount cabinet with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished).

specification:

Semi-recessed paper towel dispenser and waste receptacle shall be type-304 stainless steel; all-welded construction. Exposed surfaces shall have satin finish. Door with 9/16" (14mm) 90° return shall be secured to cabinet with a concealed, full-length, stainless steel piano-hinge and equipped with a stainless steel cable door-swing limiter and two tumbler locks. Paper towel dispenser shall be capable of dispensing 600 C-fold, 800 multifold, or 1100 singlefold paper towels. Waste receptacle shall be furnished with a removable, leakproof, rigid molded plastic waste-container with a capacity of 6.3-gal. (24-L).

Semi-Recessed Paper Towel Dispenser And Waste Receptacle shall be Model B-38032 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

TrimLineSeries™ semi-RECESSED

PAPER TOWEL DISPENSER

AND WASTE RECEPTACLE

B-38032

Rough Wall Opening 11-1/2'' (292mm) wide 53-5/8'' (1362mm) high

3-3/4'' (95mm) minimum recessed depth

Technical Data

Mount Within 12" 305mm of Front of Toilet Seat

10-21/32" 271mm

Viewing Slot

1" 25mm Typ.

1-43/64" 45mm

S S

S

S

S

S

3-11/32" 85mm

5-11/32" 135mm

1/2" 12mm Typ.

3-1/8" 80mm

6-5/8" 170mm

9-1/8" 230mm

Finish Wall

Door

Lock

4-29/64" 115mm Pivot Point

10-45/64" 270mm

Back Plate

R ec co m m en d ed

M o u n ti n g H ei g h t

O ff

F lo o r

-1

/2

0m m

Surface-Mounted Single JUMBO-ROLL

TOILET TISSUE DISPENSER

MATERIAL:

Mounting Plate — 16-gauge (1.6mm) stainless steel.

Door — Type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Slot reveals toilet tissue supply inside cabinet. Equipped with a lock keyed like other Bobrick Washroom Equipment accessories.

Spindle — Removable rubber-o-rings converts to smaller spindle. Fixed inner spindle, 20 gauge (0.9mm) stainless steel.

OPERATION:

Door unlocks with key provided and swings down for loading dispenser. Spindle adapter accommodates one toilet tissue roll up to 10" (255mm) diameter with a 1-5/8" (40mm) diameter core roll. Rubber o-rings (2) (furnished by manufacturer) may be added to the steel inner spindle to accommodate a 2-1/8" (55mm) diameter core roll. Wide viewing slot in door reveals the amount of toilet tissue on roll.

Unit is designed for quick reloading.

INSTALLATION:

Mount unit on wall or toilet partition with five sheet-metal screws (not furnished) at points indicated by an S. Rear edge of unit should be 20" (510mm) from back wall. This locates toilet tissue within 12" (305mm) of front of standard toilet that projects 30" (305mm) from back wall.

For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 6mm (1/4") toggle bolts or expansion bolts.

For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws can be secured. If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.

SPECIFICATION:

Single jumbo-roll toilet tissue dispenser door shall be 22-gauge (0.8mm) stainless steel with satin-finish. Door shall be equipped with a lock keyed like other Bobrick washroom accessories. Door shall have a slot to reveal toilet tissue supply inside cabinet. Spindle shall accommodate one toilet tissue roll up to 10" (255mm) diameter with a 2-1/8" (55mm) diameter core roll or 1-5/8" (40mm) diameter core roll by adding rubber o-rings (2) furnished.

Single Jumbo-Roll Toilet Tissue Dispenser shall be Model B-2890 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;

Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

B-2890

,-./01.23�4252

67879:�6;<=�>?�@;AA

B

CDCCECFGG

HIJJ

KLMN

O P Q R S S P T U P U �V R W T

XY

T Z P

YZ

X� R R a

R a� b T Yc P ad è �f �g Q Q P d d Yh̀ P �i P d

YZ

T

�j k ll� �m n k S S oDCoECFGG pIJJ qDCErGG CpsJJ t78u=v�w7v

CDCCECFGG

HIJJ

KLMN

B

CsGG rIIJJ xyz{|}~��}����

�����x���������

�������������� �¡�¢£¤¥ ¦§̈¡�©© ª«¬ª¥�§®�̄ °̄�±¢«²³́¥±±�±¢¥¥́®�µ́ ́¶¥́·¥·�̧¹³±¢º¬̧¢²¹³®�»¼¤¹±¥·�±¬º½«̧¥±�¾«¿¥�±«¢²³�À³²±¾®� Á³¢¥ªº«́�À³ª¥º�·¥¤º¥±±²¹³�½¹º�¹¤¥³²³ª�̧¹¿¥º®�º¹³¢�¹½�̧¹³¢«²³¥º�¾«±�±«̄ ¥�·¥ªº¥¥�¹½�«º̧�«±�½º¹³¢�¹½�̧¹¿¥º�«³·�¹¢¾¥º�ùĺ²̧Å� ƹ³¢¬º«Ç¥º²¥±�¶«±¾º¹¹̄ �«̧ ¥̧±±¹º²¥±®�È«·²¬±�¹³�±²·¥�¥·ª¥±�¹½�̧¹³¢«²³¥º�̄«¢̧¾�̧¹º³¥º±�«³·�¥·ª¥±�¹½�̧¹¿¥º�«³·�¹¢¾¥º� ƹ³¢¬º«Ç¥º²¥±�«̧ ¥̧±±¹º²¥±®�

��É������� �¡�¢£¤¥ ¦§̈¡�©© ª«¬ª¥�§®�̄ °̄�±¢«²³́¥±±�±¢¥¥́�¶²¢¾�±«¢²³�À³²±¾®�ʺ«¶³¡�¹³¥ ¤²¥̧¥¡�±¥«̄ ¥́±±�̧¹³±¢º¬̧¢²¹³®�º¹³¢�¹½� ¹̧¿¥º�¾«±�±«̄ ¥�·¥ªº¥¥�¹½�«º̧�«±�½º¹³¢�¹½�̧¹³¢«²³¥º�«³·�¹¢¾¥º�ùĺ²̧Å�ƹ³¢¬º«�Ç¥º²¥±�¶«±¾º¹¹̄ �«̧ ¥̧±±¹º²¥±®�È«·²¬±�¹³�̧¹º³¥º±� «³·�¥·ª¥±�¹½�̧¹¿¥º�̄«¢̧¾�±²·¥�¥·ª¥±�¹½�̧¹³¢«²³¥º�«³·�¹¢¾¥º�ƹ³¢¬º«�Ç¥º²¥±�«̧ ¥̧±±¹º²¥±®�Ç¥̧¬º¥·�¢¹�̧¹³¢«²³¥º�¶²¢¾�«�½¬́́ ́¥³ª¢¾� ±¢«²³́¥±±�±¢¥¥́�¤²«³¹ ¾²³ª¥®

ƹ¿¥º�˲¤±�¬¤�½¹º�·²±¤¹±«́�¹½�±«³²¢«º£�³«¤Å²³±�«³·�½¹º�±¥º¿²̧²³ª�̧¹³¢«²³¥º®

¹º�¤«º¢²¢²¹³±�¶²¢¾�¤«º¢²̧́¥ Ĺ«º·�¹º�¹¢¾¥º�±¹́²·�̧¹º¥¡�±¥̧¬º¥�¶²¢¾�¢¶¹�Ì��¼�¦Í̈ÎÎ�̈®©�¼��Ï̄ °̄�±¾¥¥¢ ̄¥¢«́�±̧º¥¶±�³¹¢� ½¬º³²±¾¥·°�«¢�«́́�¤¹²³¢±�²³·²̧«¢¥·�Ä£�«³�С�¹º�¤º¹¿²·¥�¢¾º¹¬ª¾ Ĺ́¢±¡�³¬¢±¡�«³·�¶«±¾¥º±®

¹º�¾¹́́¹¶ ̧¹º¥�̄¥¢«́�¤«º¢²¢²¹³±¡�¤º¹¿²·¥�±¹́²·�Ä«̧Ų³ª�²³¢¹�¶¾²̧¾�±¾¥¥¢ ̄¥¢«́�±̧º¥¶±�̧«³�Ä¥�±¥̧¬º¥·®�Á½�¢¶¹�¬³²¢±�«º¥�²³±¢«́́¥·� Ä«̧Å ¢¹ Ä«̧Å¡�¢¾¥³�¤º¹¿²·¥�¢¾º¥«·¥·�±́¥¥¿¥±�«³·�̄«̧¾²³¥�±̧º¥¶±�½¹º�¢¾¥�½¬́́�¢¾²̧ų¥±±�¹½�¤«º¢²¢²¹³®

¹º�̄«±¹³º£�¶«́́±¡�¤º¹¿²·¥�ÀÄ¥º�¤́¬ª±�¹º�¥¼¤«³±²¹³�±¾²¥́·±�½¹º�¬±¥�¶²¢¾�±¾¥¥¢ ̄¥¢«́�±̧º¥¶±¡�¹º�¤º¹¿²·¥�¦Í�ÑÒ�Ó̄ °̄�¢¹ªª́¥� Ĺ́¢±�¹º�¥¼¤«³±²¹³�Ĺ́¢±®

¹º�¤́«±¢¥º�¹º�·º£�¶«́́�̧¹³±¢º¬̧¢²¹³¡�¤º¹¿²·¥�̧¹³̧¥«́¥·�Ä«̧Ų³ª�¢¹�̧¹̄ ¤́£�¶²¢¾�́¹̧«́�Ĭ²́·²³ª�̧¹·¥±¡�¢¾¥³�±¥̧¬º¥�¬³²¢�¶²¢¾� ±¾¥¥¢ ̄¥¢«́�±̧º¥¶±®

���x���x������

Ǭº½«̧¥ ̄¹¬³¢¥·�±«³²¢«º£�³«¤Å²³�·²±¤¹±«́�±¾«́́�Ä¥�¢£¤¥ ¦§̈�±¢«²³́¥±±�±¢¥¥́�¶²¢¾�«́́ ¶¥́·¥·�̧¹³±¢º¬̧¢²¹³Ô�¥¼¤¹±¥·�±¬º½«̧¥±�±¾«́́� ¾«¿¥�±«¢²³�À³²±¾®�º¹³¢�¹½�±«³²¢«º£�³«¤Å²³�·²±¤¹±«́�±¾«́́�¾«¿¥�±«̄ ¥�·¥ªº¥¥�¹½�«º̧�«³·�̄«¢̧¾�¹¢¾¥º�ùĺ²̧Å�ƹ³¢¬º«Ç¥º²¥±� «̧ ¥̧±±¹º²¥±�²³�¢¾¥�¶«±¾º¹¹̄ ®�È«·²¬±�¹³�̧¹º³¥º±�«³·�¥·ª¥±�¹½�±«³²¢«º£�³«¤Å²³�·²±¤¹±«́�±¾«́́�̧¹̄ ¤́¥̄ ¥³¢�¹¢¾¥º�ùĺ²̧Å� ƹ³¢¬º«Ç¥º²¥±�¶«±¾º¹¹̄ �«̧ ¥̧±±¹º²¥±®�ƹ¿¥º�±¾«́́�Ä¥�·º«¶³¡�¹³¥ ¤²¥̧¥¡�±¥«̄ ¥́±±�̧¹³±¢º¬̧¢²¹³�«³·�±¥̧¬º¥·�¢¹�̧¹³¢«²³¥º�¶²¢¾�«� ½¬́́ ́¥³ª¢¾�±¢«²³́¥±±�±¢¥¥́�¤²«³¹ ¾²³ª¥®�ƹ³¢«²³¥º�±¾«́́�¾«¿¥�²³¢¥ªº«́�À³ª¥º�·¥¤º¥±±²¹³�½¹º�¹¤¥³²³ª�̧¹¿¥º®

ÕÖ�×�Ø�ÙÚ�Ö���Û�Õ������Ü�Ý�Þß���à��Þ��������������Ú�Û����Ù�����×������Øß� ������ ���Ö�Þ ���Ø� ���×�������ß �Ý������ß����Øß��� �����×������������Øß� ������ ���Ö�Þ Þ��Ü

ÕØ������Ö��

���������������Øß� ������ ���Ö�Þ ������Ü����Û� ��Ö�����������Û������Øß� ������ ���Ö�Þ ���Û ������Û�����Û�

QTY: 9

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/27/11 Printed in U.S.A.

The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2011 by Bobrick Washroom Equipment, Inc.

Technical Data

11-1/4'' 285mm

15-3/4'' 400mm

3-9/16'' 90mm Typ. S

Finish Face of Wall

4-1/4'' 110mm

Typ.

R ec om m en de d M ou nt in g

H ei gh t O ff F lo or to

9' to

0m m

R ec om m en de d M ou nt in g

H ei gh t O ff F lo or

Fo r

B ar ri er

-F re e D es ig n to

5' to

5m m

2-3/16'' 55mm

S

MATERIALS:

18-8 S, type-304, 20-gauge (1.0mm) stainless steel with satin fi nish. Drawn, one-piece, seamless construction. Front of dispenser has same degree of arc as other Bobrick ConturaSeries washroom accessories. Radius on corners and edges complement other ConturaSeries accessories.

OPERATION:

Dispenser holds single- or half-fold paper toilet-seat covers. Dispenser fi lls from bottom through concealed opening. Capacity:

250 toilet seat covers.

INSTALLATION:

Mount unit on wall or partition of toilet compartment with two screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes and secure with #8 x 1-1/2'' (4.2 x 38mm) sheet-metal screws. For other wall surfaces, provide fi ber plugs or expansion shields for use with sheet-metal screws, or provide 1/8'' (3mm) toggle bolts or expansion bolts.

Note: Provide a 5'' (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection to provide room for fi lling dispenser from bottom.

SPECIFICATION:

Surface-mounted toilet-seat-cover dispenser shall be type-304, 20-gauge (0.9mm) stainless steel with drawn, one-piece, seam-less construction; exposed surfaces shall have satin fi nish. Front of toilet-seat-cover dispenser shall have same degree of arc and match other Bobrick ConturaSeries® accessories in the washroom. Radius on corners and edges of toilet-seat-cover dispenser shall complement other Bobrick ConturaSeries® washroom accessories. Unit shall have a rectangular opening for dispensing toilet seat covers and a concealed opening in bottom for fi lling. Capacity shall be 250 paper toilet seat covers.

Surface-Mounted Seat-Cover Dispenser shall be Model B-4221 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

ConturaSeries®

SURFACE-MOUNTED

SEAT-COVER DISPENSER

B-4221