D.1 QASP PATIENT EVELOPMENT .doc

DOC document 67 KB Posted

Attached to
J035--Patient Elopement | Installation (VA-26-00064749)
Solicitation number
36C25726Q0529
Issued by

About this file

This is a Quality Assurance Surveillance Plan (QASP) for a Patient Elopement and Wander Management System contract (36C25726Q0529) issued by the Department of Veterans Affairs Veterans Health Administration. The QASP establishes the framework for monitoring contractor performance and defines the Government's surveillance responsibilities, assigned personnel, and performance standards throughout contract execution.

The plan specifies three primary performance standards with 95% acceptable quality levels: (1) enterprise software virtualization onto facility-supplied servers with remote support access and LAN communication; (2) installation and configuration of client workstations with proximity card readers, touchscreen monitors, and Staff Alert Panels as analog backups, networked via IT-provided VLAN switches at nurses' stations; and (3) door and zone control systems capable of locking designated doors when monitored patients are detected, with customizable web-based reporting and GEO tracking capabilities. The Contracting Officer is Frank Mendoza (U.S. Department of Veterans Affairs), with the Contracting Officer's Representative to be designated. Surveillance methods include direct observation, periodic inspections, user surveys, validated complaints, and analysis of contractor progress reports. The Government shall document all performance outcomes and issue Contract Discrepancy Reports for unacceptable performance, requiring the contractor to submit corrective action plans. No incentives or rating adjustments are associated with this contract, and the COR shall conduct performance assessment meetings with the contractor as needed throughout the period of performance.

View the file

Other files

File Type Posted
36C25726Q0529 0009.docx DOCX document
36C25726Q0529 0008.docx DOCX document
36C25726Q0529 0007.docx DOCX document
36C25726Q0529 0006.docx DOCX document
36C25726Q0529 0005.docx DOCX document
36C25726Q0529 0004.docx DOCX document
36C25726Q0529 0003.docx DOCX document
S06 36C25726Q0529 0002.pdf PDF
S06 36C25726Q0529 0001.pdf PDF
S02 36C25726Q0529_v1.pdf PDF
D.4 PART LIST.pdf PDF
D.3 PAST PERFORMANCE REFERENCE3.doc DOC document
D.5 WAGE DETERMINATION.pdf PDF
D.2 36C25726Q0529_Drawings.pdf PDF
Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Quality Assurance Surveillance Plan (QASP) Patient Elopement and Wander Management System 36C25726Q0529

1. PURPOSE

This Quality Assurance Surveillance Plan (QASP) provides a systematic method to evaluate performance for the stated contract. This QASP explains the following:

· What will be monitored.

· How monitoring will take place.

· Who will conduct the monitoring?

· How monitoring efforts and results will be documented.

This QASP does not detail how the contractor accomplishes the work. Rather, the QASP is created with the premise that the contractor is responsible for management and quality control actions to meet the terms of the contract. It is the Government’s responsibility to be objective, fair, and consistent in evaluating performance.

This QASP is a “living document” and the Government may review and revise it on a regular basis. However, the Government shall coordinate changes with the contractor. Copies of the original QASP and revisions shall be provided to the contractor and Government officials implementing surveillance activities.

2. Government Roles and Responsibilities

The following personnel shall oversee and coordinate surveillance activities.

a. Contracting Officer (CO) - The CO shall ensure performance of all necessary actions for effective contracting, ensure compliance with the contract terms, and shall safeguard the interests of the United States in the contractual relationship. The CO shall also assure that the contractor receives impartial, fair, and equitable treatment under this contract. The CO is ultimately responsible for the final determination of the adequacy of the contractor’s performance.

· Assigned Contracting Officer (CO): Frank Mendoza

· Assigned Contract Specialist: NA

· Organization or Agency: U.S. Department of Veterans Affairs

b. Contracting Officer’s Representative (COR) - The COR is responsible for technical administration of the contract and shall assure proper Government surveillance of the contractor’s performance. The COR shall keep a quality assurance file. The COR is not empowered to make any contractual commitments or to authorize any contractual changes on the Government’s behalf.

Assigned COR(S): TBD

c. Other Key Government Personnel – N/A

3. Contractor Representatives

The following employees of the contractor serve as the contractor’s program manager for this contract.

a. Program Manager –TBD

b. Other Contractor Personnel - As assigned by facility

4. Performance Standards Performance standards define desired services. The Government performs surveillance to determine if the contractor exceeds, meets or does not meet these standards.

QUALITY ASSURANCE SURVEILLANCE PLAN

Scope Service

No.
Paragraph in PWS
Indicator/Performance Standard
Standard for Quality Level
Acceptable Quality Level
Method of Surveillance

Incentive

1
Para 3
Software and Networking Enterprise software must be virtualized onto a facility-supplied server located at the facility's data center, communicating via the Hospital's Local Area Network (LAN). Facility maps will be installed, and all system devices will be programmed into the system. The vendor will provide remote support access software for connectivity to technical support staff. The facility will be responsible for providing a working internet connection and IP address at the server location.
95%
95%
Periodic Reviews and spot checks
Positive past performance rating
2
Para 4
Client workstations with proximity card readers for user login and touchscreen monitors must be installed and configured for enterprise use, communicating on the Hospital's LAN. A Staff Alert Panel (SAP) or similar may be installed at each coverage area as an analog backup for the computer system; in the event of a computer failure, the SAP will notify staff of any door and zone alarms. Workstations must be installed at each nurses' station within the coverage areas. All workstations must be networked to one another and to the server via an IT-provided VLAN switch.
95%
95%
Periodic Reviews and spot checks
Positive past performance rating
Para 5
Door and Zone Control Designated door zones must be capable of locking down using magnetic locks when a monitored patient is detected and the doors are closed. Not all doors require locking capability; the specific doors requiring lock integration will be identified during walkthroughs. Zone controllers must alarm and, where applicable, close and lock doors when a monitored patient enters the zone. All designated locked doors must remain locked until staff relocates the patient. Each door with locking capability may include a keypad or touchscreen display on both the protected and unprotected sides to clear alarms or grant emergency access via individual staff PIN codes. Virtual hallway door zones with motion control will also be monitored. Where conduit is required, procurement and installation of conduit will be the responsibility of the facility; the vendor will supply drawings to assist at no additional cost.
Para 6
6.

Alarm Identification and Reporting The system must store patient roaming history and zone status. Alarms must be displayed on a CAD drawing-based interface showing the patient's name, photo, and any associated warning messages. Upon alarm, the system must identify the zone or area where the patient triggered the alarm. The system must support customizable, web-based reports printable from a standard printer. The system must also provide GEO tracking capability for monitored patients.

5. Incentives/RATING STANDARDS There will be no incentives associated with this contract

6. Methods of QA Surveillance

Various methods exist to monitor performance.

a. DIRECT OBSERVATION

b. PERIODIC INSPECTION

c. USER SURVEY

d. VALIDATED USER/CUSTOMER COMPLAINTS

e. INSPECTION

f. PERIODIC SAMPLING

g. RANDOM SAMPLING

h. PROGRESS OR STATUS MEETINGS

i. ANALYSIS OF CONTRACTOR’S PROGRESS REPORTS

7. Ratings Metrics and methods are designed to determine if performance exceeds, meets, or does not meet a given standard and acceptable quality level. A rating scale shall be used to determine a positive, neutral, or negative outcome. The following ratings shall be used:

8. DOCUMENTING PERFORMANCE

a. Acceptable Performance

The Government shall document positive OR NEGATIVE performance. Any report may become a part of the supporting documentation for any contractual action.

b. Unacceptable performance When unacceptable performance occurs, the COR shall work with the Contracting Officer (CO) inform the contractor. This will normally be in writing unless circumstances necessitate verbal communication. In any case, the COR shall document the discussion and place it in the COR file. In order to assure that the contractor receives impartial, fair, and equitable treatment under this contract, the COR will work with the contractor to increase performance to an acceptable level.

When the COR and CO determines formal written communication is required, the COR and CO shall prepare a Contract Discrepancy Report (CDR) and present it to the contractor's program manager.

The contractor shall acknowledge receipt of the CDR in writing. The CDR will specify if the contractor is required to prepare a corrective action plan to document how the contractor shall correct the unacceptable performance and avoid a recurrence. The CDR will also state how long after receipt the contractor has to present this corrective action plan to the COR. The Government shall review the contractor's corrective action plan to determine acceptability.

Any CDRs may become a part of the supporting documentation for any contractual action deemed necessary by the CO.

9. Frequency of Measurement

a. Frequency of Measurement.

During contract performance, the COR will periodically analyze whether the negotiated frequency of surveillance is appropriate for the work being performed.

b. Frequency of Performance Assessment Meetings.

The COR shall meet with the contractor as needed to assess performance and shall provide a written assessment.

Signature – Contractor

Signature – Contracting Officer Representative See above Acceptable Quality Level & Method of Surveillance located in QASP

� See “Methods of Surveillance,” paragraph 6 of this QASP, for additional methods of monitoring performance.

Original Date: 05/02/2016

File details come from the government source that posted it. Updated .