CW26-118BA.pdf

Page 1 of 44ORDER NUMBER:

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

RFQ IFB RFP

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NAICS:

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

Coll. No.

8 (A)

EDWOSB

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

CW26118BA

Chelsea Walker

BAS1

BAS1

391014499

UNDETERMINED SOURCE

NA BLANK

WASHINGTON DC 20534

UNICOR FPI CENTRAL ACCOUNTS PAYABLE

PO BOX 11849

LEXINGTON, KY 40578-1849

1600003599 See Section B

UNICOR FUNDS 15X4500 FUNDS SHALL BE OBLIGATED BY INDIVIDUAL DELIVERY ORDERS AND NOT BY THE CONTRACT ITSELF

Chelsea Walker

X

05/14/2026

05/21/2026

12:00 PM

BAS1

BASTROP VEHICULAR

1341 TX-95

BASTROP TX 78602

BASTROP VEHICULAR

1341 TX-95

BASTROP TX 78602

05/22/2026

BASTROP VEHICULAR

1341 TX-95

BASTROP TX 78602

05/22/2026

Page 2 of 44ORDER NUMBER:

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICE Quantity U/M UNIT PRICE AMOUNT IN US$ Delivery Date

Terms:

00001 ADH0328 31 EA 06/09/2026

MEDIUM-STRENGH,THREAD-LOCKER,CAPSULE-242

MATERIAL:

THIS IS A BLUE LIQUID THREADLOCKER USED ON THREADED

FASTENERS TO PREVENT LOOSENING.

SPECIFICATIONS:

* TYPE: THREADLOCKER.

* CONTAINER SIZE: SMALLER THAN 1oz. ( .5-ml.)

* FORM: LIQUID.

* STRENGHT: MEDIUM

* CONTAINER TYPE: BOTTLE

* SERIES: 242

* SERIES PART #: 24221 (MUST BE EQUIVALENT)

* REMOVAL METHOD: HAND TOOL; HEAT

Page 3 of 44ORDER NUMBER:

* FULL CURE TIME: 24:00

* MAXIMUM SERVICE TEMP.: 300.00

00002 AHW0751 702 EA 06/09/2026

SPACER,NYLON,OD-.625",ID-.281"

DESCRIPTION:

THIS IS A BLACK NYLON SPACER, PLAIN,

.25" OVERALL LG, .281" INSIDE DIA.

SPECIFICATIONS:

SPACER TYPE- ROUND

MATERIAL- NYLON

FINISH- PLAIN

COLOR- BLACK

INSIDE DIAMETER- .281 in

OUTSIDE DIAMETER- .625 in

OVERALL LENGTH- .25 in

00003 AHW1039 230 EA 06/09/2026

MANUFACTURER'S-INFORMATION-POUCH

MATERIAL:

THIS IS A HEAVY DUTY DOCUMENT PROTECTOR WITH STRAP

SPECIFICATIONS:

DOUBLE FOLD

SNAP CLOSE FLAP

MADE OF .012 INCH THICK CLEAR VINYL

CORNERS SECURED WITH A 1/4 INCH DIAMETER NICKEL-PLATED BRASS GROMMET

20 INCH PERMANTLY ATTACHED VINYL STRAP

SIZE: 9 INCH X 12 INCH

MUST BE EQUIVALENT TO McMASTER-CARR PART NUMBER (5764T11)

Page 4 of 44ORDER NUMBER:

00004 AHW1141 25 EA 06/09/2026

KNURLED-NUT-INSERT,.165"-.260",1/4-20

MATERIAL:

THIS IS A KNURLED NUT INSERT IDEAL FOR MATERIALS THAT ARE

TO THIN TO TAP. THESE KNURLED NUTS WILL EXPAND WHEN

INSTALLED, PROVIDING EXTRA STRENGHT AND INCREASED

RESISTANCE AGAINST SPIN AND PULL-OUT

2011 SPECIFICATIONS:

Zinc Yellow Chromate-plated Steel

Usable In Oversized And Irregular Holes

High Torque-Out Values

High Pull-Out Values

Permits Flush Mounting

Blind Installation

THREAD SIZE: 1/4-20 Inch

GRIP RANGE: .165 Inch -.260 Inch

HOLE SIZE: 25/64 Inch

MUST BE EQUIVALENT TO McMASTER-CARR PART NUMBER (95105A147)

00005 AHW2202 650 EA 06/09/2026

BUTT-CONNECTOR,NON-INSULATED,8GA

MATERIAL:

THIS IS A NON-INSULATED BUTT CONNECTOR

2011 SPECIFICATIONS:

Constructed Of ETP Copper

Funnel Entry

Operating Temperature: 350 Degrees F

WIRE SIZE: 8

MUST BE EQUIVALENT TO GRAINGER PART# M8BCK

00006 AHW6481 1.375 CT 06/09/2026

SPLIT-WIRE-LOOM,STANDARD,BLACK,1/2"

Page 5 of 44ORDER NUMBER:

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CONVOLUTED SLEEVING USED FOR WIRE AND CABLE

ROUTING IN CAR, BOAT, TRAILER AND TRUCK APPLICATIONS.

1. Conduit-LIke Convoluted Sleeving.

2. Made Of Polyethylene.

3. Split For Easy Wire And Cable Insertion.

4. Will Not Gap When Bent.

5. Solvent And Acid Resistant.

6. Weather Resistant.

7. Abrasion Resistant.

8. UV Stable For Outdoor Use.

9. COLOR: Black

10. INNER DIAMETER (ID): 1/2 Inch

11. NOM. INNER DIAMETER: 0.500 Inch

12. NOM. OUTER DIAMETER: 0.585 Inch

13. TEMPERATURE RANGE: -40 Degrees To +200 Degrees F

BSBM LAST DATA TEXT REVISION 11-20-12

00007 AHW6482 4 CT 06/09/2026

SPLIT-WIRE-LOOM,STANDARD,BLACK,1"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CONVOLUTED SLEEVING USED FOR WIRE AND CABLE

ROUTING IN CAR, BOAT, TRAILER AND TRUCK APPLICATIONS.

1. Conduit-LIke Convoluted Sleeving.

2. Made Of Polyethylene.

Page 6 of 44ORDER NUMBER:

3. Split For Easy Wire And Cable Insertion.

4. Will Not Gap When Bent.

5. Solvent And Acid Resistant.

6. Weather Resistant.

7. Abrasion Resistant.

8. UV Stable For Outdoor Use.

9. COLOR: Black

10. INNER DIAMETER (ID): 1 Inch

11. NOM. INNER DIAMETER: 1.00 Inch

12. NOM. OUTER DIAMETER: 1.280 Inch

13. TEMPERATURE RANGE: -40 Degrees To +200 Degrees F

BSBM LAST DATA TEXT REVISION 11-20-12

00008 AHW9751 250 EA 06/09/2026

FUSE-HOLDER-W/CAP,MINI-FUSE,30AMP,12GA

MATERIAL:

THIS IS A MINI-FUSE TYPE FUSE HOLDER WITH PROTECTIVE CAP

2011 SPECIFICATIONS:

In-Line Type

With Protective Cap

With Two 4 Inch Wire Leads

FOR WIRE SIZE: 12 Gauge

RATING: 30 AMP

MUST BE EQUIVALENT TO BARNES PART NUMBER (8698)

00009 AUT3754 1,872 IN 06/09/2026

HEAT-SHRINK,ADHESIVE-LINED,1/2"

Page 7 of 44ORDER NUMBER:

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.5 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00010 AUT3755 336 IN 06/09/2026

HEAT-SHRINK,ADHESIVE-LINED,3/4"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.75 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

Page 8 of 44ORDER NUMBER:

00011 AUT4929 22 EA 06/09/2026

BK12849-15,SHIELD-CAP(60A-80A)(LC100M)

Shield Cap Precision Cut (LC100M)

PART#: BK12849-18

VENDOR MOST LIKELY USED: LINCOLN ELECTRIC #80302734

00012 CBL1578 2 EA 06/09/2026

STRAIN,RELIEF-CONNECTOR,PG-16

MATERIAL:

NYLON CABLE CONNECTOR PG-16 RANGE 0.23-0.53

SPECIFICATIONS:

THIS IS A LIQUID TIGHT STRAIN RELIEF TYPICALLY USED

FOR 1/0-4 CABLE. IT IS NYLON 6/6 WITH TPE SEALING

GLAND

- Wire Grip Range of 0.23" - 0.53"

- PG-16 Rated

- Acme Threads on Body to Prevent Slipping

- TPE sealing resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.

- PG Hub Threads are steel conduit threads

00013 CLP0034 425 EA 06/09/2026

MATERIAL:

THIS IS A WIRE AND TUBE CLIP WITH A NEOPRENE COVER

2011 SPECIFICATIONS:

Closed Type Furnished Open

Zinc Plated Finish

Neoprene Rubber Cushion

Meets MIL R-3065 And AMS-3209 Specifications

Page 9 of 44ORDER NUMBER:

TUBE DIAMETER: 5/8 Inch

WIDTH: 1/2 Inch

MOUNTING BOLT SIZE: 1/4 Inch

THICKNESS: .032 Inch

INDUSTRY NUMBER: -10

MUST BE EQUIVALENT TO BARNES PART NUMBER (17752)

00014 CMP0031 1,425 EA 06/09/2026

WIRE<(>&<)>TUBE-CLAMP,NEOPRENE-CVR,3/8",1/2"

MATERIAL:

THIS IS A WIRE AND TUBE CLIP WITH A NEOPRENE COVER

2011 SPECIFICATIONS:

Closed Type Furnished Open

Zinc Plated Finish

Neoprene Rubber Cushion

Meets MIL R-3065 And AMS-3209 Specifications

TUBE DIAMETER: 3/8 Inch

WIDTH: 1/2 Inch

MOUNTING BOLT SIZE: 1/4 Inch

THICKNESS: .032 Inch

INDUSTRY NUMBER: -6

MUST BE EQUIVALENT TO BARNES PART NUMBER (17748)

00015 CMP0051 342 EA 06/09/2026

KP67174,HEAVY,DUTY,CLAMP-1/4",HOLE-1"

HEAVY DUTY CLAMP

SIZE:CLAMP-1/4",HOLE-1" (1 PER PACK)

BARNES PRODUCTS PART NUMBER

00016 CTR0053 120 EA 06/09/2026

6-CAVITY-MALE-CONNECTOR,16-18-GAUGE

MATERIAL:

THIS IS A METRI PACK 150 SERIES SEALED ELECTRICAL CONNECTOR

Page 10 of 44ORDER NUMBER:

MALE CONNECTOR

ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:6

COLOR: BLACK

00017 CTR0082 950 EA 06/09/2026

BUTT-CONNECTOR,NYLON-INSULATED,16-14ga

MATERIAL:

THIS IS A NYLON-INSULATED BUTT CONNECTOR WITH INSULATION

OVERHANG TO PROVIDE SUPPORT TO WIRE

2011 SPECIFICATIONS:

Nylon Insulated

Insulation Overhang

WIRE SIZE: 16-14 Gauge

INSULATION COLOR: Blue

MUST BE EQUIVALENT TO BARNES PART NUMBER (23035)

00018 CTR0851 200 EA 06/09/2026

FUSE-TAPPER-3/16-MALE-TAB-FOR-MINI-FUSE

SPECIFICATIONS:

THIS BRACKET IS A BRASS FUSE TAPPER PUSH ON. 3/16'' WILL BE

THE TAB SIZE FOR THE CONNECTING POINT FOR THE FEMALE

SPADE TERMINAL.

BSBM LAST DATA TEXT REVISION 11-26-13

00019 CTR232544 1,230 EA 06/09/2026

Page 11 of 44ORDER NUMBER:

TPA-SECONDARY-LOCK,3-CAVITY-CONNECTOR

"TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:3

THREE CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052845) OR EQUIVALENT

Page 12 of 44ORDER NUMBER:

00020 CTR232545 540 EA 06/09/2026

TPA-SECONDARY-LOCK,2-CAVITY-CONNECTOR

"TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:2

TWO CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052634) OR EQUIVALENT

Page 13 of 44ORDER NUMBER:

00021 CTR232547 330 EA 06/09/2026

2-CAVITY-FEMALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

FEMALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:2

COLOR:BLACK WITH GRAY WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> TWO WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12052641) OR EQUIVALENT

00022 CTR232548 160 EA 06/09/2026

2-CAVITY-MALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

MALE CONNECTORS ACCEPT 16-18 GA. WIRE

Page 14 of 44ORDER NUMBER:

NUMBER OF CAVITIES:2

COLOR:BLACK WITH GRAY WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> TWO WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12162000) OR EQUIVALENT

Page 15 of 44ORDER NUMBER:

00023 CTR232549 615 EA 06/09/2026

"METRI PACK 150 SERIES SEALED

FEMALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:3

COLOR:BLACK WITH VIOLET WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> THREE WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12110293) OR EQUIVALENT

00024 CTR232550 510 EA 06/09/2026

3-CAVITY-MALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

MALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:3

COLOR:BLACK WITH VIOLET WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> THREE WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12129615) OR EQUIVALENT

Page 16 of 44ORDER NUMBER:

Page 17 of 44ORDER NUMBER:

00025 CTR232595 200 EA 06/09/2026

TPA-SECONDARY-LOCK,6-CAVITY-CONNECTOR

TPA SECONDARY LOCK FITS METRI PACK 150 SERIES

NUMBER OF CAVITIES:6

SIX CAVITY CONNECTOR SECONDARY LOCK

TERMINAL SUPPLY COMPANY PART NUMBER (12052850) OR EQUIVALENT

Page 18 of 44ORDER NUMBER:

00026 CTR232600 109 EA 06/09/2026

6-CAVITY-FEMALE-CONNECTOR,16-18-GAUGE

"METRI PACK 150 SERIES SEALED

FEMALE CONNECTORS ACCEPT 16-18 GA. WIRE

NUMBER OF CAVITIES:6

COLOR: BLACK WITH VIOLET WEATHER SEAL

REQUIRES ONE SECONDARY LOCK <(>&<)> THREE WIRE SEALS

TERMINAL SUPPLY COMPANY PART NUMBER (12052848) OR EQUIVALENT

Page 19 of 44ORDER NUMBER:

00027 DIO0024 240 EA 06/09/2026

POWER-DIODE,6-AMP,AUTOMOTIVE

SPECIFICATIONS:

THIS IS A POWER DIODE USED TO RESTRICT THE DIRECTION OF

ELECTRICAL CURRENT FLOW

MATERIAL:

Page 20 of 44ORDER NUMBER:

Designed For Automotive Use

Used With Flashing Lights, Ignition Kills, Horn Relays, Etc.

Color Coded To Identify The Direction Of Current Flow

SIZE: 6 Amp

LAST BSBM DATA TEXT REVISION 8-13-12

00028 FSE0031 35 EA 06/09/2026

JCASE,FUSE,30AMP,LOW,PROFILE,PINK

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 30 AMP LOW PROFILE JCASE FUSE. INDUSTRY STANDARD FUSE

DESIGNED FOR LOW-VOLTAGE AUTOMOTIVE AND OTHER

ELECTRONIC APPLICATIONS.

1. JCASE STYLE DESIGN.

2. HIGH AMPERAGE CAPABILITY.

3. PROVIDES INCREASED TIME DELAY.

4. PROVIDES LOW VOLTAGE DROP.

5. UL LISTED.

6. COLOR CODED AMPERAGE RATING.

7. ANSI STANDARD OCR-A FONT FOR VISUAL INSPECTION SYSTEMS.

8. DOUBLE SPRING-BEAM BOX TERMINAL.

9. SECONDARY LOCKING FEATURE TO HOLD TERMINAL FIRMLY IN PLACE.

10. RATING: 30 AMP

11. COLOR CODE: PINK

12. VOLTAGE RATING: 32V AC/DC

13. FUSE STYLE LOW PROFILE

14. OVERALL LENGTH: 14.5MM

15. OVERALL WIDTH: 12MM

16. BLADE STYLE: STANDARD

Page 21 of 44ORDER NUMBER:

17. COLOR: PINK

18. OVERALL, HEIGHT: 16mm

19. MATERIAL: PSU (COVER); PA66-GF13 (HOUSING)

00029 FSE0047 680 EA 06/09/2026

MINI-FUSE,3-AMP,VIOLET

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 3 AMP

9. COLOR CODE: Violet

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00030 FSE0049 360 EA 06/09/2026

MINI-FUSE,5-AMP,TAN

Page 22 of 44ORDER NUMBER:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 5 AMP

9. COLOR CODE: Tan

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00031 FSE0050 840 EA 06/09/2026

MINI-FUSE,10-AMP,RED

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

Page 23 of 44ORDER NUMBER:

7. Parallel Tabs.

8. RATING: 10 AMP

9. COLOR CODE: Red

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00032 FSE0051 120 EA 06/09/2026

MINI-FUSE,15-AMP,BLUE

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 15 AMP

9. COLOR CODE: Blue

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00033 FSE0052 236 EA 06/09/2026

Page 24 of 44ORDER NUMBER:

MINI-FUSE,30-AMP,GREEN

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 30 AMP

9. COLOR CODE: Green

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00034 FSE0054 270 EA 06/09/2026

MINI-FUSE,20-AMP,YELLOW

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A MINI STYLE INDUSTRY STANDARD FUSE DESIGNED FOR

LOW-VOLTAGE AUTOMOTIVE AND OTHER ELECTRONIC

APPLICATIONS.

1. Mini Style Design.

2. Plastic Housing.

3. Color Coded Amperage Rating.

Page 25 of 44ORDER NUMBER:

4. Built To Exacting OEM Specifications.

5. UL Listed.

6. Fast acting.

7. Parallel Tabs.

8. RATING: 20 AMP

9. COLOR CODE: Yellow

10. VOLTAGE RATING: 32V AC/DC

11. TAB SIZE: 3/32 Inch

BSBM LAST DATA TEXT REVISION 11-15-12

00035 GRM0020 2,000 EA 06/09/2026

HEAVY,DUTY,RUBBER,GROMMET

MATERIAL:

THIS IS A BLACK RUBBER GROMMET FOR VEHICLE FIRE EXTINGUISHER

BRACKET

SPECIFICATIONS:

FOR USE WITH FIRE EXTINGUISHER BRACKET

00036 GRM0021 308 EA 06/09/2026

SBR-RUBBER-GROMMET-2"-x-1/4"-GROOVE

DESCRIPTION:

SBR RUBBER GROMMET FOR 2" HOLE DIAMETER AND

1/4" MATERIAL THICKNESS

SBR RUBBER GROMMET SPECIFICATIONS:

FOR HOLE DIA.: 2"

FOR THICKNESS MATERIAL: 1/4"

ID: 1 3/4"

FLANGE DIA.: 2 1/2"

Page 26 of 44ORDER NUMBER:

OVERALL HT: 1/2"

HARDNESS RATING: MEDIUM

HARDNESS: DUROMETER 55A

TEMP. RANGE: -30 TO 170 DEGREES

FOR USE OUTDOORS: NO

COLOR: BLACK

PKG. QTY: (5) FIVE

MCMASTER-CARR PART NUMBER (9600K125) OR COMPARABLE

00037 GRM0028 450 EA 06/09/2026

RUBBER-GROMMET,1/4"-I.D.,1/2"-GROOVE

MATERIAL:

THIS IS A RUBBER GROMMET FOR WIRE TUBING EXTENDING

THROUGH PANELS

2011 SPECIFICATIONS:

Made Of Rubber

Black

HOLE INNER DIAMETER: 1/4 Inch

GROOVE WIDTH: 1/8 Inch

GROOVE DIAMETER: 5/8 Inch

00038 GRM0244 300 EA 06/09/2026

116840,GROMMET,3/4X1-3/8"X1/8",GROOVE

GROMMET

SIZE:3/4"ID.X1-3/8"OD.X1/8"THICK WALL GROOVE(25PER PACK)

MCMASTER-CARR PART NUMBER 116840 OR COMPARABLE

00039 HLD0008 10 EA 06/09/2026

SPARE-TIRE-TIE-DOWN-WHEEL-CONE

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A POLYURETHANE CONE USED TO CENTER A TIRE ON A

SPARE TIRE CARRIER WITH A HOLE THROUGH THE CENTER TO

Page 27 of 44ORDER NUMBER:

RECEIVE CARRIER'S THREADED SHAFT.

1. Made Of Polyurethane Rubber.

2. Cone Shape Design.

3. Designed To Center A Spare Tire To A Spare Tire Carrier.

4. Hole Through Center Of Cone To Receive The Spare Tire

Carrier Shaft.

5. COLOR: Black

6. THICKNESS: 0.9375 Inch Min. To 1 Inch Max. Tolerance

7. HEIGHT: 2.875 Inch Min. To 2.9375 Inch Max. Tolerance

8. BASE WIDHT: 6.4375 Inch Min. To 6.75 Inch Max. Tolerance

9. CENTER HOLE DIAMETER: 1 Inch Min. To 1.0625 Inch Max

Tolerance

BSBM LAST DATA TEXT REVISION 11-15-12

00040 HNG0279 10 EA 06/09/2026

HINGE,NON-REM-PIN,STL,3"WX.120"TX3"H

SPECIFICATIONS:

THIS IS A SURFACE-MOUNT HINGE WITHOUT HOLES

MATERIAL:

Made Of Unfinished Steel

Reversible For Right-And-Left Hand Mounting

Nonremovable Pin

Designed For Surface Mount Applications

Does Not Have Mounting Holes

Leaves Lay Flat

LEAF THICKNESS: 0.120 Inches

OPEN WIDTH: 3 Inches

PIN DIAMETER: 0.25 Inches

LEAF HEIGHT: 3 Inches

MINIMUM RANGE OF MOTION: 265 Deg (from the folded position)

LAST BSBM DATA TEXT REVISION 8-6-12

Page 28 of 44ORDER NUMBER:

00041 HWS0141 4 EA 06/09/2026

TIG-TORCH-COLLET-3/32"

MATERIAL:

TIG-TORCH-COLLET-3/32"

MUST BE EQUIVALENT TO MSC PART NUMBER (62143839)

00042 HWS0205 45 EA 06/09/2026

FLEXCUT-ELECTRODE

MATERIAL:

ELECTRODE FOR USE W/LC100M PLASMA TORCHES

MUST BE EQUIVALENT TO LINCOLON ELECTRIC PART NUMBER (BK12849-3)

00043 HWS0218 29 EA 06/09/2026

GAS-LENS-FOR-3/32"-MAX -ELECTRODE

MATERIAL:

GAS LENS: FOR 3/32 in MAX ELECTRODE Dia, 45V44, PACKAGE OF TWO (2)

MUST BE EQUIVALENT TO W.W. GRAINGER, INC. PART NUMBER (6UGZ4)

Page 29 of 44ORDER NUMBER:

00044 HWS0219 30 EA 06/09/2026

NOZZLE-ALUMINA-NO.6-STD-53N60

MATERIAL:

NOZZLE: ALUMINA, No. 6, STD, 53N60, FOR TIG WELDING, PACKAGE OF TEN (10)

MUST BE EQUIVALENT TO W.W. GRAINGER INC. PART NUMBER (6UHCO)

00045 HWS0242 40 EA 06/09/2026

PLASMA-TORCH-NOZZLE-60A-5PK

MATERIAL:

NOZZLE FOR USE W/LC100M/LC105M PLASMA TORCHES,

COMES IN A 5PK.

MUST BE EQUIVALENT TO LINCOLN ELECTRIC PART NUMBER (BK12849-5)

00046 MAT0066 370 EA 06/09/2026

SOUND-DEADENING-PAD-500MM-X-500MM

Description:

Sound Deadening Pads suppress noise and vibration. Conformable to allow easy shaping around a variety of stamped shapes, the pads can be applied to vehicle floor pans, engine compartments, hoods, decklids, as well as inside doors and body panels. Featuring an OEM matching diamond emboss.

Pads are self adhesive, easy to apply and paintable.

Page 30 of 44ORDER NUMBER:

Center perforation allows easy door panel installation.

Specifications:

Length: 500 mm

Units per Case: 10

Width: 500 mm

Harmonizing Code: 3921190000

ECCN: EAR99

00047 RIV0051 500 EA 06/09/2026

ALUM/STL-RIVET,DOME-HEAD,3/16,3/8-1/2

MATERIAL:

THIS IS A OPEN-END BLIND RIVET WITH A DOME HEAD

2011 SPECIFICATIONS:

HEAD STYLE: Dome

RIVET MATERIAL: Aluminum

MANDREL MATERIAL: Steel

RIVET DIAMETER: 3/16 Inch

GRIP RANGE: 3/8 - 1/2 Inch

MUST BE EQUIVALENT TO GRAINGER PART# 38WF42

00048 RIV0186 25 EA 06/09/2026

NYLON/PLASTIC-RIVET,BLACK,1/4,.30-.42

MATERIAL:

THIS IS A AUTOMOTIVE (FORD) PLASTIC RIVET WITH A FLANGE HEAD

2011 SPECIFICATIONS:

HEAD STYLE: Flange

RIVET MATERIAL: Nylon

MANDREL MATERIAL: Nylon

RIVET DIAMETER: 1/4 Inch

GRIP RANGE: .30 - .42 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (KP822)

Page 31 of 44ORDER NUMBER:

00049 RIV0318 50 EA 06/09/2026

RIVET-NUT,SLOTTED-BODY,1/4"-20,0.02-0.28

MATERIAL: SLOTTED BODY RIVET NUT

SPECIFICATIONS: MADE OF C1008-C1010 ZINC YELLOW CHROMATE

STEEL; THREADS MEET CLASS 2B; HAS A LARGER BACKSIDE

FLANGE TO INCREASE STRENGTH; IDEAL FOR USE IN PLASTIC

AND THIN MATERIALS; CAN ACCOMMODATE A WIDER RANGE OF

MATERIAL THICKNESSES AS WELL AS SLIGHTLY OVERSIZED HOLES

DIMENSIONS: THREAD SIZE: 1/4"-20;MATERIAL THICKNESS

(GRIP) RANGE:0.020"-0.280";SLOTTED BODY:0.384";LENGTH

FROM UNDER HEAD:1";WIDTH ACROSS HEAD OF RIVET:0.645";

THICKNESS OF HEAD OF RIVET:0.059"

00050 RNG0395 50 EA 06/09/2026

RING-TERMINAL,NON-INSLTD,12-10,5/16"

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Elecro Tin Plated

350 Degree F Operating Temperature

MATERIAL: ETP Copper

WIRE SIZE: 12-10 Guage

STUD SIZE: 5/16 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (23264)

00051 RNG0405 700 EA 06/09/2026

RING-TERMINAL,NON-INSLTD,6,1/4"

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Elecro Tin Plated

Terminal Barrel Is Rolled With Brazed Seam Chamfered To Form

Page 32 of 44ORDER NUMBER:

Funnel Entry

Indentations Or Dimples To Provide The Interior Of The BArrel

With Extra Gripping Power

MATERIAL: ETP Copper

WIRE SIZE: 6 Guage

STUD SIZE: 1/4 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (23293)

00052 RNG0680 1,100 EA 06/09/2026

RING-TERMINAL,NYLON-INSL,16-14GA,1/4

MATERIAL:

THIS IS A NYLON INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Funnel Entry

Insulation Grip

WIRE SIZE: 16-14 Guage

STUD SIZE: 1/4

INSULATION COLOR: Blue

MUST BE EQUIVALENT TO BARNES PART NUMBER (23024)

00053 SCR0496 100 EA 06/09/2026

HX-HD-SCREW,GRD-8-STL,5/16-18,1-1/2"

A screw is designed to be used in a threaded hole-sometimes along with a nut, while a bolt is designed to be inserted through a hole and secured with a nut.

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A HEX HEAD CAP SCREW. HEX HEAD CAP SCREWS

ARE GENERAL PURPOSE THREADED FASTENERS. WHEN

FULLY THREADED, THESE FASTENERS ARE ALSO KNOWN

AS TAP BOLTS. THEY FEATURE A THICK, HEXAGONAL

HEAD TO PROVIDE AN AMPLE BEARING SURFACE FOR

Page 33 of 44ORDER NUMBER:

TIGHTENING WITH A WRENCH.

1. TYPE: Hex Head Cap Screw

2. MATERIAL: Grade 8 Alloy Steel

3. RESISTANCE: Rust Resistance

4. COATING: Zinc Chromate

5. STANDARD OR METRIC: Standard

6. HEAD TYPE: Hex Head

7. HEAD DIAMETER: 1/2 Inch

8. HEAD HEIGHT: 13/64 Inch

9. SURFACE UNDER HEAD: Flat Bearing Surface

10. THREAD DIAMETER: 5/16 Inch

11. THREAD PER INCH (TPI): 18

12. THREAD LENGTH TYPE: Fully Threaded

13. MINIMUM THREAD LENGTH: Threaded To Head

14. THREAD DIRECTION: Right-Hand Threads

15. THREAD TYPE: UNC Course Thread

16. THREAD FIT: Class 2A

17. SCREW LENGTH: 1-1/2 Inch

18. SCREW LENGTH MEASURED: From Under The Head

19. TIP TYPE: Blunt Tip

20. MINIMUM TENSILE STRENGTH: 150,000 psi

21. MINIMUM ROCKWELL HARDNESS: C33

22. MINIMUM REQUIRED STANDARD: ASME B18.2.1

23. MINIMUM COMPLIANCE: SAE J429

BSBM LAST DATA TEXT REVISION 6-18-13

00054 SCR0556 300 EA 06/09/2026

SELF-TAP-SCREW,HEX-WSHR-HD,SSTL,1/4,1"

MATERIAL:

THIS IS A SELF DRILLING/TAPPING SCREW WITH A INDENTED HEX

WASHER HEAD

2011 SPECIFICATIONS:

Page 34 of 44ORDER NUMBER:

HEAD STYLE: Indented Hex Washer

POINT: #3

MATERIAL: Stainless Steel

DIAMETER: 1/4

LENGTH: 1 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (95595)

00055 SCR0682 100 EA 06/09/2026

HX-HD-TAP-BOLT,GRD-8,1/4-20,1-1/4"

A screw is designed to be used in a threaded hole-sometimes along with a nut, while a bolt is designed to be inserted through a hole and secured with a nut.

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A HEX HEAD CAP SCREW. HEX HEAD CAP SCREWS

ARE GENERAL PURPOSE THREADED FASTENERS. WHEN

FULLY THREADED, THESE FASTENERS ARE ALSO KNOWN

AS TAP BOLTS. THEY FEATURE A THICK, HEXAGONAL

HEAD TO PROVIDE AN AMPLE BEARING SURFACE FOR

TIGHTENING WITH A WRENCH.

1. SCREW TYPE: Hex Head Cap Screw

2. MATERIAL: Grade 8 Medium Carbon Alloy Steel

3. RESISTANCE: Rust Resistance

4. COATING: Zinc Plated

5. STANDARD OR METRIC: Standard

6. HEAD TYPE: Hex Head

7. HEAD DIAMETER: 7/16 Inch

8. HEAD HEIGHT: 5/32 Inch

9. SURFACE UNDER HEAD: Flat Bearing Surface

10. THREAD DIAMETER: 1/4 Inch

11. THREAD PER INCH (TPI): 20

12. THREAD LENGTH TYPE: Fully Threaded

13. MINIMUM THREAD LENGTH: Threaded To Head

14. THREAD DIRECTION: Right-Hand Threads

Page 35 of 44ORDER NUMBER:

15. THREAD TYPE: UNC Course Thread

16. THREAD FIT: Class 2A

17. SCREW LENGTH: 1-1/4 Inch

18. SCREW LENGTH MEASURED: From Under The Head

19. TIP TYPE: Blunt Tip

20. MINIMUM TENSILE STRENGTH: 150,000 psi

21. MINIMUM ROCKWELL HARDNESS: C33

22. MINIMUM REQUIRED STANDARD: ASME B18.2.1

23. MINIMUM COMPLIANCE: SAE J429

BSBM LAST DATA TEXT REVISION 7-12-13

00056 SCR2534 100 EA 06/09/2026

PAN-HEAD-SCREW,SSTL,PHILLIPS,6-32,1"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A PAN HEAD MACHINE SCREW. PAN HEAD

MACHINE SCREWS ARE GENERAL PURPOSE SCREWS

TYPICALLY USED IN NONCRITICAL APPLICATIONS. THESE

SCREWS ARE MOST COMMONLY USED TO FASTEN METAL

TO METAL. THEY ARE DESIGNED TO BE INSERTED INTO

A PRETHREADED HOLE OR MATED WITH A NUT . PAN HEAD

SCREWS HAVE A SLIGHTLY ROUNDED TOP. THE PAN HEAD

PROVIDES A DECORATIVE APPEARANCE, MODERATE

HEAD HEIGHT AND HEAD DIAMETER WITH A FLAT BEARING

SURFACE.

1. TYPE: Pan Head Machine Screw

2. MATERIAL: 18-8 Stainless Steel

3. RESISTANCE: Excellent Corrosion Resistance

4. COATING: None Coated

5. STANDARD OR METRIC: Standard

6. DRIVE TYPE: Phillips

7. DRIVE SIZE: #2

Page 36 of 44ORDER NUMBER:

8. HEAD TYPE: Pan Head

9. HEAD DIAMETER: 0.270 Inch

10. HEAD HEIGHT: 0.097 Inch

11. SURFACE UNDER HEAD: Flat Bearing Surface

12. THREAD DIAMETER: #6

13. THREAD PER INCH (TPI): 32

14. THREAD LENGTH TYPE: Fully Threaded

15. MINIMUM THREAD LENGTH: Threaded To Head

16. THREAD DIRECTION: Right-Hand Threads

17. THREAD TYPE: UNC Course Thread

18. THREAD FIT: Class 2A

19. SCREW LENGTH: 1 Inch

20. SCREW LENGTH MEASURED: From Under The Head

21. TIP TYPE: Blunt Tip

22. MINIMUM TENSILE STRENGTH: 72,000 psi

23. MINIMUM ROCKWELL HARDNESS: B80

24. MINIMUM REQUIRED STANDARD: ASME B18.6.3

25. MINIMUM COMPLIANCE: RoHS Compliant

BSBM LAST DATA TEXT REVISION 6-19-13

00057 SCR2758 20 EA 06/09/2026

THUMB-SCREW,SSTL,SPADE-HD,2",1/4-20

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A SPADE-HEAD THUMB SCREW IDEAL FOR MAKING

FREQUENT ADJUSTMENTS. THE WIDE HEAD MAKES THIS SCREW

EASY TO TURN BY HAND WITH NO TOOLS REQUIRED.

1. Made Of 18-8 Stainless Steel.

2. Corrosion Resistant.

3. HEAD STYLE: Spade With/Out Shoulder

4. HEAD WIDTH (WD.): 23/32 Inch

Page 37 of 44ORDER NUMBER:

5. HEAD HEIGHT (HT.): 1/2 Inch

6. THREAD DIAMETER (DIA): 1/4 Inch

7. THREAD PER INCH (TPI): 20

8. THREAD LENGTH (LG.): 2 Inch

9. THREAD TYPE: Fully Threaded

10. THREAD FIT: Class 2A

11. TENSILE STRENGTH: 80,000 psi

12. MINIMUM ROCKWELL HARDNESS: B85

BSBM LAST DATA TEXT REVISION 02-4-13

00058 TAG0001 250 EA 06/09/2026

KEY-TAG-SPLIT-RING-1-1/4"-DIA

DESCRIPTION:

ROUND TAG WITH METAL RIM AND METAL KEY RING,

1 1/4" DIA, WHITE, 50/PACK

MUST BE EQUIVALENT TO NULEAF PART NUMBER (AVE11025)

00059 TAG0070 200 EA 06/09/2026

KEY-TAG,BRASS,ROUND,1-1/2"dia.

MATERIAL:

THIS IS A BRASS KEY TAG

2011 SPECIFICATIONS:

Brass

Round

TAG DIAMETER: 1-1/2 Inch

HOLE DIAMETER: 3/16 Inch

Page 38 of 44ORDER NUMBER:

MUST BE EQUIVALENT TO BARNES PART NUMBER (C20683)

00060 TML0215 300 EA 06/09/2026

RING-TERMINAL,NON-INSLTD,6GA,5/16

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Elecro Tin Plated

Terminal Barrel Is Rolled With Brazed Seam Chamfered To Form

Funnel Entry

Indentions Or Dimples To Provide The Interior Of The BArrel

With Extra Gripping Power

MATERIAL: ETP Copper

WIRE SIZE: 6 Gauge

STUD SIZE: 5/16

MUST BE EQUIVALENT TO BARNES PART NUMBER (23294)

00061 TML0266 66 EA 06/09/2026

RING-TERMINAL,NON-INSLTD,5/16",8ga

MATERIAL:

THIS IS A NON-INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Copper Construction

Tin Plated

Anti-Rotational Tongue

Selectively Annealed Barrel

Serrated Inner Barrel

Hardened Tongue

Long Barrel With Brazed Seam

WIRE SIZE: 8 Gauge

STUD SIZE: 5/16 Inch

MUST BE EQUIVALENT TO BARNES PART NUMBER (78131)

00062 TML1219 400 EA 06/09/2026

Page 39 of 44ORDER NUMBER:

RING-TERMINAL,NYLON-INSL,16-14GA,5/16

MATERIAL:

THIS IS A NYLON INSULATED RING TERMINAL

2011 SPECIFICATIONS:

Funnel Entry

Insulation Grip

WIRE SIZE: 16-14 Gauge

STUD SIZE:5/16-3/8

INSULATION COLORl: Blue

MUST BE EQUIVALENT TO BARNES PART NUMBER (23026)

00063 TPE0022 88 RL 06/09/2026

HIGH-TEMPERARURE-MASKING-TAPE-1-1/2"

MATERIAL:

3M 233+/401+ HIGH TEMPERATURE MASKING TAPE- 1-1/2"X 60 YDS

MUST BE EQUIVALENT TO ULINE PRODUCTS NUMBER (S-10296)

00064 TPE0522 400 EA 06/09/2026

TAPE,ELECTRICAL,PLUS,33,SUPER,SCOTCH,3M

MATERIAL: 3M BRAND SCOTCH SUPER 33 PLUS

ELECTRICAL TAPE SPECIFICATIONS: HAS A THICKNESS OF 7 MIL;MEETS

REQUIREMENTS OF ASTM-D 3005 TYPE 1,UL 510,HH1599C,AND CSA 22.2;IT

RESISTS UV RAYS AND CORROSION;IT IS PRIMARILY INSULATION FOR CABLE

WIRING; WORKS IN TEMPERATURE RANGE OF 0 DEGREES FAHRENHEIGHT TO 220

DEGREES FAHRENHEIGHT;IT IS FLAME RETARDANT AND MOISTURE RESISTANT;COLOR

IS BLACK

DIMENSIONS: 3/4"WIDTH; 66 FT. LONG ROLL

MUST BE EQUIVALENT TO GRAINGER PART # 2A225

Page 40 of 44ORDER NUMBER:

00065 WIR4433 2,000 FT 06/09/2026

PRIMARY-WIRE,19-STRAND,WHITE,16GA

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: White

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

00066 AUT1923 544 FT 06/09/2026

HEAT-SHRINK,ADHESIVE-LINED,1/4"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.250 Inch

Page 41 of 44ORDER NUMBER:

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00067 AUT3751 8,400 IN 06/09/2026

HEAT-SHRINK,ADHESIVE-LINED,1/8"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.125 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00068 AUT3752 46,320 IN 06/09/2026

HEAT-SHRINK,ADHESIVE-LINED,3/16"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A 3:1 ADHESIVE LINED HEAT SHRINK TUBING DESIGNED

FOR USE IN WIRE IDENTIFICATION, WIRE BUNDLING, MECHANICAL

PROTECTION, COLOR CODING, LIGHTWEIGHT HARNESSING,

PHYSICAL PROTECTION OF COMPONENTS, STRAIN RELIEF AND

SOLDER INSULATION.

Page 42 of 44ORDER NUMBER:

1. Thin Dual Wall Design.

2. Outer Wall Made Of Polyolefin Heat Shrink.

3. Inner Wall Made Of A Hot Melt Adhesive.

4. Inner Layer Provides A Water-Tight Seal.

5. 3:1 Shrink Ratio.

6. NOMINAL SIZE: 0.1875 Inch

7. COLOR: Black

8. OPERATING TEMPERATURE: -55 Degrees C To 100 Degrees C

9. SHRINK TEMPERATURE: 100 Degrees C

00069 CBL0311 30,000 EA 06/09/2026

18103-X,PYTHON,STD.,CABLE,TIES,BLK,8"

PYTHON STANDARD CABLE TIES COLOR:BLACK

SIZE:8" (1000 PER PACK)

(MAR. 2016)

MUST BE EQUIVALENT TO GRAINGER PART# 36J162

00070 PLS0002 4,800 FT 06/09/2026

OVERSPRAY,PROTECTIVE,SHEETING

MATERIAL:

THIS IS A 16’ X 400’ ROLL OVERSPRAY PROTECTIVE SHEETING

SPECIFICATIONS:

TO PROTECT EQUIPMENT, FLOORS AND WALLS WITH THIS OVERSPRAY PLASTIC

SHEETING

THIS PRODUCT FEATURES A HIGH DENSITY, TEAR-RESISTANT, CLEAR FILM

MEASURES 16’ X 400’

MUST BE EQUIVALENT TO TASCO PART (MMM06728)

00071 TML0820 1,500 EA 06/09/2026

C,12045773,TERMINALS (MALE)

P/N:12045773 NSN:N/A

Page 43 of 44ORDER NUMBER:

CHARACTERISTICS:

PACKARD TERMINALS <(>&<)> CONNECTORS

18-16 WIRE RANGE

METRI-PACK 150 SERIES SEALED

MALE TERMINALS

MUST BE EQUIVALENT TO MSC PART# 62817721

00072 TML1089 1,500 EA 06/09/2026

12048074,SEALED-FEMALE-TERMINAL,18-16GA

CHARACTERISTICS:

SEALED CONNECTOR

FEMALE TERMINAL,18-16GA

MUST BE EQUIVALENT TO P/N: 12048074

VCVH LAST DATA TEXT REVISION 1-26-16

00073 WIR4434 4,000 FT 06/09/2026

PRIMARY-WIRE,19-STRAND,BLACK,16ga

MATERIAL:

THIS IS A PLASTIC INSULATED SINGLE CONDUCTOR PRIMARY WIRE

2011 SPECIFICATIONS:

PVC Insulation

Stranded Copper Conductor

Resistant To Heat, Moisture, Oil And Weather

Meets SAE J-1128 Type GPT Specifications

50 Volts Maximum

COLOR: Black

WIRE GAUGE: No. 16 Gauge

STRAND GAUGE: 29 Gauge

NUMBER OF STRANDS: 19

NOMINAL OVERALL DIAMETER: .105

MUST BE EQUIVALENT TO BARNES PART NUMBER (-23438-1)

Page 44 of 44ORDER NUMBER:

00074 WIR6558 1,650 FT 06/09/2026

SPLIT-WIRE-LOOM,STANDARD,BLACK,3/4"

ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!

SPECIFICATIONS:

THIS IS A CONVOLUTED SLEEVING USED FOR WIRE AND CABLE

ROUTING IN CAR, BOAT, TRAILER AND TRUCK APPLICATIONS.

1. Conduit-LIke Convoluted Sleeving.

2. Made Of Polyethylene.

3. Split For Easy Wire And Cable Insertion.

4. Will Not Gap When Bent.

5. Solvent And Acid Resistant.

6. Weather Resistant.

7. Abrasion Resistant.

8. UV Stable For Outdoor Use.

9. COLOR: Black

10. INNER DIAMETER (ID): 3/4 Inch

11. NOM. INNER DIAMETER: .750 Inch

12. NOM. OUTER DIAMETER: .820 Inch

13. TEMPERATURE RANGE: -40 Degrees To +200 Degrees F

BSBM LAST DATA TEXT REVISION 11-20-12

Clause Attachment

These clauses are Incorporated by reference - please go to the Acquisition.gov FAR website if you want to see the full clause language.

52.212-4 Terms and Conditions—Commercial Products and Commercial Services

52.203-17 Contractor Employee Whistleblower Rights

52.203-19 Prohibition on Requiring Internal Confidentiality Agreements

52.204-13 System for Award Management – Maintenance

52.209-6 Protecting the Government’s Interest When Subcontracting with

Debarred/Suspended Contractors

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations

52.222-36 Equal Opportunity for Workers with Disabilities

52.222-36 Equal Opportunity for Workers with Disabilities, with Alt I

52.222-50 Combating Trafficking in Persons

52.223-23 Sustainable Products and Services

52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act

52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act, with Alternate II

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving

52.232-33 Payment by Electronic Funds Transfer—System for Award Management

52.233-3 Protest After Award

52.233-4 Applicable Law for Breach of Contract Claim