CSS best value.docx

Fast Steering Mirror System 1333ND25QNB680328 THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES FOR CERTAIN COMMERCIAL ITEMS UNDER THE AUTHORITY OF FAR 13.

The solicitation number is1333ND25QNB680328 and this solicitation is a Request for Quotation (RFQ) for commercial items as defined in FAR Subpart 2.101. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2025-04 dated June 11, 2025.

This acquisition is being solicited as Full & Open Competition

The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 – Analytical Laboratory Instrument Manufacturing with a small business size standard of 1000 employees.

1352.215-72 INQUIRIES (APR 2010)

Offerors must submit all questions concerning this solicitation in writing to both the Contract Specialist Elizabeth Timberlake at elizabeth.timberlake@nist.gov and the Contracting Officer Donald Collie at donald.collie@nist.gov. Questions should be received no later than five (5) calendar days after the issuance date of this solicitation. All responses to the questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the responses included in the amendment to the solicitation will govern performance of the contract.

BACKGROUND:

The National Institute of Standards and Technology (NIST), Physical Measurement Lab (PML), Microsystems and Nanotechnology Division (MND) develops integrated microsystems by advancing the state of the art in nanofabrication, thereby enabling the transfer of NIST measurement technologies to the industrial, academic, and government communities. The MND’s Nanofabrication and Measurement group performs cryogenic optical microscopy and spectroscopy measurements of solid-state defect quantum emitters in chip-based silicon nanophotonic structures. A two-axis, high bandwidth, high resolution fast steering mirror system is required for scanning confocal photoluminescence microscopy of various types of quantum emitters in nanophotonic cavities. with a replaceable mirror.

LIST OF ATTACHMENTS:

The following documents and forms are hereby provided as attachments. The purpose of these attachments is for reference and to provide specification requirements to the Contractor for quotation purposes only.

Attachment A: Statement of Work Attachment B: Deviations to FAR 52.212-3 and 52.212-5

All offerors shall provide a firm-fixed-price quotation for the following line item:

0002 – Extended Warranty Option

0004 – Transportation and other related fees (if applicable at time of delivery) Not to Exceed.

TOTAL

FAR 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS

All quotations shall conform to solicitation provisions/clauses and be prepared in accordance with this section. The quotation shall be clearly and concisely written as well as be neat, indexed (cross-indexed as appropriate) and logically assembled. Note: The term “indexed” refers to a table of contents that lists sections and page numbers. In the event that the Offeror is unable to create an indexed quotation, an alternative approach such as a Table of Contents shall suffice. All pages of the quotation shall be appropriately numbered. A cover letter may be included in addition to Volumes I-IV discussed below.

In preparing the quotation, each volume shall stand on its own. For each given evaluation factor the Government will only evaluate the information provided in the corresponding section of the quotation. The Offeror’s quotation shall be clearly divided into the following distinct volumes:

Volume I – Technical Quotation Volume II – Past Performance Volume III – Price Quotation Volume IV – Terms and Conditions

Volume I - Technical Quotation:

The offeror shall submit one (1) copy of their technical quotation, electronically, via E-mail to the Contract Specialist and Contracting Officer identified above. The technical quotation shall address the following:

Technical Capability:

The quoter shall submit technical approach and capability documentation which may include a narrative, charts, graphs, tables, drawings, product / service literature, and as applicable, demonstrated authority to provide the necessary items and perform the required services identified in the statement of work (Attachment 1). The documentation shall clearly describe, in sufficient detail, the vendor's authority, proposed items, resources and methods to successfully fulfill the requirements including specifications, performance capability requirements, delivery schedules, warranties, and all service requirements. The submission shall clearly identify each line item above. The submission must demonstrate that the proposed system meets or exceeds each minimum requirement described within the attached statement of work document by providing a citation between the statement of work paragraph and the relevant section of the technical description or product literature. The offeror must not simply state they will meet or exceed the requirement; evidence must be provided. If applicable, evidence that the offeror is authorized by the manufacturer to provide the item(s) in the quotation shall be included.

Stronger consideration will be given to the following specifications: CLIN 0001 specifications below.

Consideration will be given to systems offering both digital and analog mirror control from the controller.

If this specification is being offered, please provide sufficient information to indicate that the system meets this requirement to include but not limited to technical data sheets or other ways of demonstrating capability.

Volume II - Past Performance The offeror shall provide past performance information regarding relevant contracts over the past three (3) years with Federal, state, or local governments, or commercial customers. If the offeror intends to subcontract with another firm(s) for part of this requirement, that firm’s past performance information shall also be provided. If the offeror has no relevant past performance, it may include a statement to that effect in its quotation. The government reserves the right to consider data obtained from sources other than those described by the offeror in its quotation.

The description of each contract/order described in this section shall not exceed one half page in length. For each contract/order, the offeror shall provide the following information:

1. Contract number;

2. Product Number or Service provided.

3. Description and relevance to solicitation requirements including dollar value; Ability to meet the desired technical exceedance and minimum specifications in the offered past performance.

4. Period of Performance – indicate by month and year the state and completion (or “ongoing”) dates for the contract;

5. Reference Contact – If a non-Government contract, identify the name and address of the client with current telephone number and email address of a point of contact of the client responsible for the contract;

6. Contracting Office – If a Government contract (Federal or state), identify the Contracting Officer (CO), and Contracting Officer’s Representative (COR), and their names, current telephone numbers and email addresses.

7. Problems Encountered – include information regarding information regarding any problems encountered on the contracts described above and corrective actions taken to resolve those problems.

Volume III - Price Quotation:

The offeror shall submit one (1) copy of their entire quotation, electronically, via E-mail to the Contract Specialist and Contracting Officer identified above. The pricing quotation shall be separate from any other portion of the quotation. The offeror shall propose a firm-fixed-price quotation for each CLIN to include all shipping costs (FOB Destination). Price quotations shall remain valid for a period of 90 days from the date quotations are due.

Offerors/quoters that are proposing products manufactured outside of the United States must identify any other or unknown charges that may be applicable to the sale of these products (here indicated as CLIN 0004) as a separate line item on price quotes/proposals. This price element may be listed as part of the cost of the product or as a sub-total element but must be clearly identified. This price element must only apply to the total value of the goods identified for customs processing. Only include the country of origin and the tariff percentage currently in place or the expected amount at time of delivery for that country. Price quotes shall clearly identify the relevant tariffs in terms of percentage and total cost. If there are multiple countries of origins and associated tariffs, identify each separately.

Terms and Conditions

Offerors shall provide a completed copy of all provisions listed below:

1. FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services (May 2024) (DEVIATION FEB 2025)

2. FAR 52.225-18, Place of Manufacture

3. FAR 52.229-11, Tax on Certain Foreign Procurements—Notice and Representation

Acceptance of Terms and Conditions (Addendum to FAR 52.212-1(b) (11)):

If the contractor objects to any of the terms and conditions contained in this solicitation, the contractor shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the contractor to identify in their quotation any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order (PO).

Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an Offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the proposed price. However, the terms and conditions stated herein will be included in any resultant purchase order, not the terms and conditions of the Offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation.

System for Award Management (SAM) Registration

In accordance with FAR 52.204-7(b)(1) An Offeror is required to be registered in SAM when submitting an offer or quotation and at time of award (see FAR clause 52.204-13, System for Award Management Maintenance, for the requirement to maintain SAM registration during performance and through final payment).

DUE DATE FOR QUOTATIONS

Offerors shall submit their electronic quotations, via email, so that NIST receives them not later than 12:00 PM Eastern Time (ET) on August 18,2025. E-mail quotations shall be submitted directly to the Contract Specialist Elizabeth Timberlake at elizabeth.timberlake@nist.gov and the Contracting Officer Donald Collie at donald.collie@nist.gov.

Please reference the RFQ number in the subject line of email communications. 0fferors quotations shall not be deemed received by the Government until the quotation is entered in the e-mail inbox set forth above.

Provision 52.212-2, Evaluation-Commercial Products and Commercial Services applies to this procurement. The evaluation criteria included in paragraph (a) of the provision are as follows:

EVALUATION CRITERIA

The Government intends to award a single firm fixed price purchase order (PO) from this solicitation utilizing simplified acquisitions procedures in accordance with FAR part 13.5. The Government reserves the right not to award a PO and to make an award without discussions based solely upon initial quotes.

Basis for Award:

The Government will award a firm fixed price purchase order resulting from this solicitation once the Contractor is verified as responsible and the quotation conforming to the solicitation is found most advantageous to the Government, price and other factors considered. The Government will evaluate quotations based on the following evaluation criteria factors: 1) Technical Capability 2) Past Performance and 3) Price. Technical Capability and Past Performance when combined are more important than price. Technical capability is more important than Past Performance.

An Offeror's failure to address any factor may be considered indicative of the Offeror's lack of understanding of the Government's requirements and may result in the offer being determined unacceptable.

Evaluation Factors:

Factor 1- Technical Capability:

This procurement is for commercial items. Therefore, prototypes or demonstration models will not be accepted. Additionally, used or refurbished instruments will not be considered. Evaluation of technical capability shall be limited to the information provided in the quotation.

Evaluation of this factor is a subjective evaluation of the vendor's demonstrated resources, capability, and methods to meet all requirements. This may include the authority to provide the required items (i.e. authorized dealer/seller/reseller), authority to provide maintenance and repair services, and the capability and method to successfully meet all the requirements in the statement of work. Quotations that do not demonstrate that the proposed equipment meets or exceeds all requirements will not be considered further for award. If an offeror’s technical description and/or product literature does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not meet the requirement.

Stronger consideration will be given to the following specifications: CLIN 0003

Consideration will be given to systems offering both digital and analog mirror control from the controller.

If this specification is being offered, please provide sufficient information to indicate that the system meets this requirement to include but not limited to technical data sheets or other ways of demonstrating capability.

Factor 2- Past Performance In assessing the offeror's past performance information, NIST will evaluate, as appropriate, (b) successful performance of contract requirements, quality and timeliness of delivery of goods and services, (c) communications between contracting parties, (d) proactive management and customer satisfaction.

Evaluation of this factor will be based on information contained in the technical portion of the proposal, CPARS, and information provided by references. The Government will evaluate past performance information by contacting appropriate references, including NIST references, if applicable. The Government may also consider other available information in evaluating the Offeror’s past performance. The Government will assign a neutral rating if the offeror has no relevant past performance information.

Factor 3- Price: The proposed price will be evaluated. The evaluation will determine whether the proposed prices are reasonable in relation to the solicitation requirements. A price realism analysis will not be conducted. Prices must be proportionate with the technical portion of the quotation.

(End of provision)

PROVISIONS AND CLAUSES:

The following provisions and clauses apply to this acquisition and are hereby incorporated by reference.

All FAR provisions and clauses may be viewed at https://www.acquisition.gov/browse/index/far All CAR provisions and clauses may be viewed at https://www.acquisition.gov/car

PROVISIONS

FAR 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements – Representation (JAN 2017) FAR 52.204-7 System for Award Management (OCT 2018) FAR 52.204-16, Commercial and Government Entity Code Reporting (AUG 2020) FAR 52.204-17 Ownership or Control of Offeror (AUG 2020) FAR 52.204-20 Predecessor of Offeror (AUG 2020) FAR 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (AUG 2020)

FAR 52.204-26 Covered Telecommunications Equipment or Services-Representation (OCT 2020) FAR 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation (NOV 2015) FAR 52.212-1 Instructions to Offerors -- Commercial Items (NOV 2021) FAR 52.212-3 Offeror Representations and Certifications – Commercial Products and Commercial Services (DEC 2022) (DEVIATION FEB 2025) FAR 52.212-2 Buy American Certificate (OCT 2022) FAR 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran – Representation and Certifications (JUN 2020)

FULL TEXT FAR PROVISIONS

Additionally, the following full-text provisions are required to be completed and returned with the solicitation response:

(a) Definitions. As used in this provision-- Commercial and Government Entity (CAGE) code means--

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

(b) The Offeror represents that it [--] has or [--] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates has in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code:

Immediate owner legal name:

(Do not use a doing business as name) Is the immediate owner owned or controlled by another entity?:

[--] Yes or [--] No.

(d) If the Offeror indicates yes in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code:

Highest-level owner legal name:

(Do not use a doing business as name) (End of provision)

FAR 52.204-29 Federal Acquisition Supply Chain Security Act Orders – Representation and Disclosure. (DEC 2023)

(a) Definitions. As used in this provision, Covered article, FASCSA order, Intelligence community, National security system, Reasonable inquiry, Sensitive compartmented information, Sensitive compartmented information system, and Source have the meaning provided in the clause 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

(b) Prohibition. Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the prohibition is set out in an applicable Federal Acquisition Supply Chain Security Act (FASCSA) order, as described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

(c) Procedures.

(1) The Offeror shall search for the phrase “FASCSA order” in the System for Award Management (SAM)( https://www.sam.gov) for any covered article, or any products or services produced or provided by a source, if there is an applicable FASCSA order described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

(2) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM, but are effective and do apply to the solicitation and resultant contract (see FAR 4.2303(c)(2)).

(3) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation.

(d) Representation. By submission of this offer, the offeror represents that it has conducted a reasonable inquiry, and that the offeror does not propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (e).

(e) Disclosures. The purpose for this disclosure is so the Government may decide whether to issue a waiver. For any covered article, or any products or services produced or provided by a source, if the covered article or the source is subject to an applicable FASCSA order, and the Offeror is unable to represent compliance, then the Offeror shall provide the following information as part of the offer:

(1) Name of the product or service provided to the Government;

(2) Name of the covered article or source subject to a FASCSA order;

(3) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Offeror;

(4) Brand;

(5) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(6) Item description;

(7) Reason why the applicable covered article or the product or service is being provided or used;

(f) Executive agency review of disclosures. The contracting officer will review disclosures provided in paragraph (e) to determine if any waiver may be sought. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise subject to a FASCSA order and may instead make an award to an offeror that does not require a waiver.

(End of provision)

FAR 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation

(a) Definitions. Inverted domestic corporation and subsidiary have the meaning given in the clause of this contract entitled Prohibition on Contracting with Inverted Domestic Corporations (52.209-10).

(b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.

(c) Representation. The Offeror represents that--

(1) It [ ] is, [ ] is not an inverted domestic corporation; and

(2) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation.

(End of provision)

FAR 52.225-18 Place of Manufacture (August 2018)

(a) Definitions. As used in this provision— “Manufactured end product” means any end product in Federal Supply Classes (FSC) 1000-9999, except—

(1) FPSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- [ ] (1) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or [ ] (2) Outside the United States.

(End of provision)

FULL TEXT CAR PROVISIONS:

CAR 1352.233-70 Agency Protests (APR 2010)

(a) An agency protest may be filed with either: (1) the contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999)

(b) Agency protests filed with the Contracting Officer shall be sent to the following address:

NIST/ACQUISITION MANAGEMENT DIVISION

ATTN: Donald Collie, CONTRACTING OFFICER 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899

(c) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address:

ATTN: HEAD OF THE CONTRACTING OFFICE (HCO)

100 Bureau Drive, MS 1640 Gaithersburg, MD 20899

(d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority.

(e) Service upon the Contract Law Division shall be made as follows:

U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230.

FAX: (202) 482-5858

(End of clause)

CAR 1352.233-71 GAO and Court of Federal Claims Protests (APR 2010)

(a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed.

(b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims.

(c) Service upon the Contract Law Division shall be made as follows:

U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue N.W. Washington, D.C. 20230.

FAX: (202) 482-5858

(End of clause)

CLAUSES

FAR 52.204-13 System for Award Management Maintenance (OCT 2018) FAR 52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020) FAR 52.204-19 Incorporation by Reference of Representations and Certifications (DEC 2014) FAR 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021) FAR 52.204-30 Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) FAR 52.212-4 Contract Terms and Conditions – Commercial Products and Commercial Services (DEC 2022) FAR 52.232-39 Unenforceability of Unauthorized Obligations (JUN 2013) FAR 52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) FAR 52.247-35 F.O.B. Destination, Within Consignee`s Premises (APR 1984)

FULL TEXT FAR CLAUSES

FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (DEC 2022) (DEVIATION FEB 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Aug 2019) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023)

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805note).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (31 U.S.C. 6101 note).

52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101 note).

52.222-3, Convict Labor (June 2003) (E.O. 11755).

52.222-19, Child Labor—Cooperation with Authorities and Remedies (Dec 2022) (E.O. 13126).

52.222-21, Prohibition of Segregated Facilities (Apr 2015).

52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (June 2020) (E.O. 13513).

52.225-1, Buy American Supplies (Oct 2022).

52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Oct 2018) (31 U.S.C. 3332).

(End of clause)

CAR PROVISIONS & CLAUSES FULL TEXT CAN BE ACCESSED AT:

http://www.ecfr.gov/cgi-bin/text-idx?tpl=/ecfrbrowse/Title48/48cfrv5_02.tpl

CAR 1352.201-70, Contracting Officer's Authority (APR 2010) CAR 1352.201-72 Contracting Officer's Representative (COR).

CAR 1352.209-73, Compliance with the Laws (APR 2010) CAR 1352.209-74 Organizational Conflict of Interest (APR 2010)

CAR 1352.246-70 Place of Acceptance (APR 2010)

(a) The Contracting Officer or the duly authorized representative will accept supplies and services to be provided under this contract.

(b) The place of acceptance will be:

100 Bureau Drive, Gaithersburg, MD. 20899-0001.

(End of clause)

NIST LOCAL CLAUSES

NIST LOCAL-53 Contract Performance During Changes in NIST Operating Status Unless otherwise stated in the contract terms and conditions, normal days of business operation are Monday through Friday, excluding Federal Holidays. However, throughout the contract period of performance, there may be circumstances beyond the control of the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), that will impact normal days of business operation, such as inclement weather, power outages, etc. In circumstances such as these, the Contractor must call the appropriate NIST campus status line to verify the operating status:

Gaithersburg Campus Operating Status Line:

(301) 975-8000

(800) 437-4385 x8000 (toll free)

During a lapse in appropriation, access to Government facilities and resources, including equipment and systems, will be limited to excepted personnel for both Federal employees and Contractor personnel. If performance of the contract is onsite and/or requires Government interaction, unless you have been, or are notified that you are to work under an excepted status, you will automatically enter a temporary work stoppage. The work stoppage shall remain in effect until the lapse is resolved and notification is provided via the NIST website at https://www.nist.gov/ and/or the NIST operating status lines. Additionally, Contractors are encouraged to monitor public broadcasts or the Office of Personnel Management’s website at www.opm.gov for the Federal Government operating status.

NIST will provide notification to all contractors that are determined to have excepted status. All excepted contractors are required to continue performance and communicate with the appointed Contracting Officer’s Representative (COR) for further guidance, or NIST Contracting Officer if a COR is not appointed.

Contractors with supply or service contracts that are fully funded at the time of contract award and do not require access to Government facilities, resources, or active administration by Government personnel in a manner that would cause the government to incur additional obligations during the lapse in appropriation may continue performance.

(End of clause)

NIST LOCAL-54 ELECTRONIC BILLING INSTRUCTIONS

NIST requires that Invoice/Voucher submissions are sent electronically via email to INVOICE@NIST.GOV.

Each Invoice or Voucher submitted shall include the following:

(1) Contract number;

(2) Contractor name and address;

(3) Unique entity identifier (see www.sam.gov for the designated entity for establishing unique entity identifiers);

(4) Date of invoice;

(5) Invoice number;

(6) Amount of invoice and cumulative amount invoiced to-date;

(7) Contract Line Item Number (CLIN);

(8) Description, quantity, unit of measure, unit price, and extended price of supplies/services delivered;

(9) Prompt payment discount terms, if offered; and

(10) Any other information or documentation required by the contract.

(End of clause)

NIST LOCAL 56 DEPARTMENT OF COMMERCE ELECTRONIC SUBMISSION OF PAYMENT REQUESTS FOR EXISTING CONTRACT ACTIONS INVOICING PROCESSING PLATFORM-ALTERNATE I (DEC 2022)

Upon written notice from the contracting officer the following supersedes all other instructions for the submission of payment requests. Accordingly, following written notice payment requests must be submitted electronically through the U.S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable payment request or invoicing instructions, Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: SEE NIST LOCAL-54 for documentation requirements.

The Contractor must use the IPP website to register, access, and use IPP for submitting payment requests. If not already enrolled, the Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email within three to five business days of the addition of the contract award to IPP. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email: IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting payment requests, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation. Contact the contracting officer for more information on submitting a waiver request.

(End of clause)