CRFQ SWC2700000005 ATTACHMENT_C to amend Attachment_A and Attachment_B SBUS27.pdf

PDF 137 KB Posted

Attached to
VARIOUS SCHOOL BUSES FY2026-27 School Year
Solicitation number
CRFQ 0212 SWC2700000005 3
Issued by
Kanawha County, West Virginia

About this file

This document is an amendment (Attachment C) to a Competitive Sealed Request for Quotation (CRFQ SWC2700000005) issued by West Virginia for the procurement of various school buses for the FY2026-27 school year. The amendment modifies the terms and conditions previously established in Attachments A and B of the original solicitation. The request seeks quotations from qualified vendors capable of supplying school buses meeting specified requirements for the upcoming academic year. Key procurement details including item specifications, quantities, delivery schedules, and evaluation criteria are contained within the referenced attachments, with this amendment clarifying or revising particular provisions to ensure vendor compliance and accurate bid submission.

The amendment document serves to update pricing structures, technical specifications, or contractual terms initially presented in the base solicitation documents. Vendors responding to this procurement must account for the modifications outlined in Attachment C when preparing their quotations to ensure their bids remain responsive to the amended requirements. The specific pricing terms, set-asides, funding sources, and other financial considerations are detailed in the complete solicitation package, including the original attachments and this amendment. Interested bidders should review all documents in their entirety to understand the full scope of requirements and any changes to previously issued terms before submitting their responses.

View the file

Other files

Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

ATTACHMENT_C CRFQ SWC2700000005

SBUS27

Attachment_C (to amend Attachment_A and Attachment_B)

1.3. Back Up Alarms

1.3.a. All buses shall be equipped with an audible electrical warning device, automatically actuated when the bus is in reverse gear.

1.3.b. The device shall be of 112 decibels (DB), meeting Society of Automotive Engineers (SAE) J994B. The device shall be mounted behind the rear axle. And shall emit an intermittent sound.

1.3.c. Variable sound is not permitted

1.8. Electrical Systems

1.8.a.1. Diesel Power: Three Group 31 batteries with a minimum of 1950 cold cranking amps (CCA) total are required. Gasoline/propane-powered buses shall have a minimum of two batteries with a minimum of 1300 CCA. Electric-powered buses shall be the manufacturer’s standard.

1.8.a.5. There shall be a manual noise suppression switch installed in the control panel. The switch shall be labeled and shall be yellow in color. This switch shall be an on/off type, not a momentary type, that deactivates body and chassis equipment that produces noise, including, at least, the AM/FM radio, heaters, air conditioners, fans and defrosters. This switch shall not de-activate safety systems, such as windshield wipers or lighting systems. Exception: Electric Vehicle (EV) roof mounted A/C with integrated condenser can be left running and the fan shall be set on low.

1.10. Frame

1.10.a. Frame rails less than 50,000 psi must be reinforced to prevent cracking. Exception: integrated truss chassis.

1.11. Fuel Tank

1.11.a. The fuel tank on all gas and diesel buses, 47 passengers and above, shall have a minimum capacity of 60 gallons with a 55-gallon actual draw. It shall be filled and vented outside of the body.

Construction will prevent the spillage or drainage of fuel on any part of the exhaust system. The fuel tank shall be the manufacturer's standard. All fuel tanks shall be constructed per the manufacturer’s standards and with corrosion-resistant material. Fuel tank shall be ordered with polyurea coating.

1.11.b. Exception: Type A vehicles will come with the manufacture’s standard.

2.9. First Aid Kit

2.9.b. The minimum requirement is the current NSTSP specification.

2.14. Identification

2.14.a. Illuminated and reflective school bus signs are required on the front and rear of the bus.

2.17. Lamps and Signals

ATTACHMENT_C CRFQ SWC2700000005

SBUS27

2.17.a. All lamps, including installation, shall conform to current standards and recommendations of SAE, West Virginia Motor Vehicle Law and FMVSS 108. All exterior and interior lamps including headlights shall be light emitting diode (LED).

2.17.a. All lamps, including installation, shall conform to current standards and recommendations of SAE, West Virginia Motor Vehicle Law and FMVSS 108. All exterior and interior lamps shall be light emitting diode (LED).

2.17.e. Roof Mounted Strobe Lamp

2.17.e.1. An LED strobe lamp, white in color, shall be mounted on the roof of the school bus.

2.25. Storage Compartment

2.25.a. Two compartments of adequate strength and capacity for storage of tire chains and other equipment shall be provided on either side or both on the same side.

2.27. Video Equipment

2.27.b.5. A video monitoring system for passing stopped school buses must include the minimum system requirements established by W. Va. Code §17C-12-8. A forward-facing camera shall be installed.

4.2. GENERAL Requirements

4.2.a. Each securement system location shall have a minimum clear floor area of 30 inches x 54 inches.

The front and rear securement points measured from center to center must be located no less than 54 inches apart. Additional floor area may be required for some applications. Consultation between the user and the manufacturer is recommended to ensure adequate area is provided in the event more securement locations are needed.

File details come from the government source that posted it. Updated .